The paper introduces one design idea that making use of SCM to control Real-timely the dynamic compensation of reactive power.Firstly,design one Circuit to Sample the voltage and current,and by these datas we can easi...The paper introduces one design idea that making use of SCM to control Real-timely the dynamic compensation of reactive power.Firstly,design one Circuit to Sample the voltage and current,and by these datas we can easily calculate the power factor,and Voltage controller in the microcontroller to determine whether input the compensation capacitance according to the size of power factor,the paper also analyzes the principle of capacitance compensation and calculation method. Dynamic compensation for the entire process is quick and accurate.展开更多
Frequent occurrence of large-scale cascading trip-off of wind turbine raises the concern about the decision process of ordered control of reactive power compensation devices. The theory of fuzzy multi-attribute decisi...Frequent occurrence of large-scale cascading trip-off of wind turbine raises the concern about the decision process of ordered control of reactive power compensation devices. The theory of fuzzy multi-attribute decision making is adopted to ascertain the action sequence of reactive power compensation devices. First, a set of evaluation indexes including control sensitivity, regulation margin, response time, response level and cost is set up, and fuzziness of the proposed qualitative indexes is introduced to make them comparable to the proposed quantitative indexes. Then a method to calculate fuzzy weight of each index is put forward for evaluating relative importance of the proposed indexes. Finally, the action sequence of reactive power compensation devices is determined through the theory of fuzzy compromise decision making. The case study shows that the proposed method is effective to obtain the action sequence of reactive power compensation device which correspond to experience.展开更多
In order to improve the power factor of the circuit, the article takes STM32 as core circuit to development reactive power compensation controller for low voltage intelligent reactive compensation. Circuit can detect ...In order to improve the power factor of the circuit, the article takes STM32 as core circuit to development reactive power compensation controller for low voltage intelligent reactive compensation. Circuit can detect electricity distribution network parameters, and send messages to mobile phone via SMS text messages by TC35 module, remote control compensation capacitor configuration parameters. Circuit with a flexible, reliable, convenient and practical features. This paper analyzes the structure of the controller hardware and software, and describes the hardware schematic circuit diagram and software diagram of the controller. Controller with integrated control, maximize the use of compensating equipment to improve grid power quality.展开更多
A parameter that allows an evaluation of power quality transmitted, or distributed, between energy source and the final user is electric system power factor. Among other aspects, a bigger power factor, close to unit v...A parameter that allows an evaluation of power quality transmitted, or distributed, between energy source and the final user is electric system power factor. Among other aspects, a bigger power factor, close to unit value, relieves operational conditions of lines and cables, besides, it improves feeder＇s voltage behavior. Due to load variation along the day, the dynamic compensation of power factor allows maintaining this parameter close to the ideal. This paper brings a study about a reactive dynamic compensator based on the voltage control in a capacitive element, varying the reactive energy in accordance with the system demand, everything from the energy efficiency point of view. In distribution systems, the losses due to this variable compensation can be lower than in other compensation methods and also the voltage presents a better behavior, justifying its application.展开更多
This article investigates the power quality enhancement in power system using one of the most famous series converter based FACTS controller like IPFC (Interline Power Flow Controller) in Power Injection Model (PIM). ...This article investigates the power quality enhancement in power system using one of the most famous series converter based FACTS controller like IPFC (Interline Power Flow Controller) in Power Injection Model (PIM). The parameters of PIM are derived with help of the Newton-Raphson power flow algorithm. In general, a sample test power system without FACTs devices has generated more reactive power, decreased real power, more harmonics, small power factor and poor dynamic performance under line and load variations. In order to improve the real power, compensating the reactive power, proficient power factor and excellent load voltage regulation in the sample test power system, an IPFC is designed. The D-Q technique is utilized here to derive the reference current of the converter and its D.C link capacitor voltage is regulated. Also, the reference voltage of the inverter is arrived by park transformation technique and its load voltage is controlled. Here, a sample 230 KV test power system is taken for study. Further as the conventional PI controllers are designed at one nominal operating point they are not competent to respond satisfactorily in dynamic operating conditions. This can be circumvented by a Fuzzy and Neural network based IPFC and its detailed Simulink model is developed using MATLAB and the overall performance analysis is carried out under different operating state of affairs.展开更多
Wind energy （WE） has become immensely popular for distributed generation （DG）. This case presents the monitoring, modeling, control, and analysis of the two-level three-phase WE based DG system where the electric ...Wind energy （WE） has become immensely popular for distributed generation （DG）. This case presents the monitoring, modeling, control, and analysis of the two-level three-phase WE based DG system where the electric grid interfacing custom power device （CPD） is controlled to perform the smart exchanging of electric power as per the Indian grid code. WE is connected to DC link of CPD for the grid integration purpose. The CPD based distributed static compensator, i.e. the distributed static synchronous compensator （DSTATCOM）, is utilized for injecting the wind power to the point of common coupling （PCC） and also acts against the reactive power demand. The novel indirect current control scheme of DSTATCOM regulates the power import and export between the WE and the electric grid system. It also acts as a compensator and performs both the key features simultaneously. Hence, the penetration of additional generated WE power to the grid is increased by 20% to 25%. The burden of reactive power compensation from grid is reduced by DSTATCOM. The modeling and simulation are done in MATLAB. The results are validated and verified.展开更多
Controllable saturation reactors are widely used in reactive power compensation. The control system of controllable saturation reactor determines adaption speed, accuracy, and stability. First, an innovative type of c...Controllable saturation reactors are widely used in reactive power compensation. The control system of controllable saturation reactor determines adaption speed, accuracy, and stability. First, an innovative type of controllable saturation reactor is introduced. After that the control system is designed, and a self-tuning algorithm in PID controller is proposed in the paper. The algorithm tunes PID parameters automatically with different error signals caused by varied loads in power system. Then the feasibility of the above algorithm is verified by Simulink module of Matlab software. The results of simulation indicate that the control system can efficiently reduce adaption time and overshoot.展开更多
Control strategy affects directly the working performances of dynamic voltage regulator （DVR）. One-cycle control is an effective nonlinear signal modulation control method. In this paper, a new one-cycle control sch...Control strategy affects directly the working performances of dynamic voltage regulator （DVR）. One-cycle control is an effective nonlinear signal modulation control method. In this paper, a new one-cycle control scheme for DVR was proposed in single phase supply system. On the basis of principle analysis, the corresponding one-cycle control model for DVR was built up, which is characterized by simple control circuits, good control performance, and high control precision. As an example, a control model for single-phase DVR was simulated by using Matlab/Simulink and SimPowerSystem. The results show that the load voltage could be compensated quickly at the points of supply voltage stepping down and up, and the relative error was less than 4% in the whole voltage sag process. Both theory analysis and simulation results show that the new one-cycle control scheme for DVR is effective.展开更多
文摘The paper introduces one design idea that making use of SCM to control Real-timely the dynamic compensation of reactive power.Firstly,design one Circuit to Sample the voltage and current,and by these datas we can easily calculate the power factor,and Voltage controller in the microcontroller to determine whether input the compensation capacitance according to the size of power factor,the paper also analyzes the principle of capacitance compensation and calculation method. Dynamic compensation for the entire process is quick and accurate.
文摘Frequent occurrence of large-scale cascading trip-off of wind turbine raises the concern about the decision process of ordered control of reactive power compensation devices. The theory of fuzzy multi-attribute decision making is adopted to ascertain the action sequence of reactive power compensation devices. First, a set of evaluation indexes including control sensitivity, regulation margin, response time, response level and cost is set up, and fuzziness of the proposed qualitative indexes is introduced to make them comparable to the proposed quantitative indexes. Then a method to calculate fuzzy weight of each index is put forward for evaluating relative importance of the proposed indexes. Finally, the action sequence of reactive power compensation devices is determined through the theory of fuzzy compromise decision making. The case study shows that the proposed method is effective to obtain the action sequence of reactive power compensation device which correspond to experience.
文摘In order to improve the power factor of the circuit, the article takes STM32 as core circuit to development reactive power compensation controller for low voltage intelligent reactive compensation. Circuit can detect electricity distribution network parameters, and send messages to mobile phone via SMS text messages by TC35 module, remote control compensation capacitor configuration parameters. Circuit with a flexible, reliable, convenient and practical features. This paper analyzes the structure of the controller hardware and software, and describes the hardware schematic circuit diagram and software diagram of the controller. Controller with integrated control, maximize the use of compensating equipment to improve grid power quality.
文摘A parameter that allows an evaluation of power quality transmitted, or distributed, between energy source and the final user is electric system power factor. Among other aspects, a bigger power factor, close to unit value, relieves operational conditions of lines and cables, besides, it improves feeder＇s voltage behavior. Due to load variation along the day, the dynamic compensation of power factor allows maintaining this parameter close to the ideal. This paper brings a study about a reactive dynamic compensator based on the voltage control in a capacitive element, varying the reactive energy in accordance with the system demand, everything from the energy efficiency point of view. In distribution systems, the losses due to this variable compensation can be lower than in other compensation methods and also the voltage presents a better behavior, justifying its application.
文摘This article investigates the power quality enhancement in power system using one of the most famous series converter based FACTS controller like IPFC (Interline Power Flow Controller) in Power Injection Model (PIM). The parameters of PIM are derived with help of the Newton-Raphson power flow algorithm. In general, a sample test power system without FACTs devices has generated more reactive power, decreased real power, more harmonics, small power factor and poor dynamic performance under line and load variations. In order to improve the real power, compensating the reactive power, proficient power factor and excellent load voltage regulation in the sample test power system, an IPFC is designed. The D-Q technique is utilized here to derive the reference current of the converter and its D.C link capacitor voltage is regulated. Also, the reference voltage of the inverter is arrived by park transformation technique and its load voltage is controlled. Here, a sample 230 KV test power system is taken for study. Further as the conventional PI controllers are designed at one nominal operating point they are not competent to respond satisfactorily in dynamic operating conditions. This can be circumvented by a Fuzzy and Neural network based IPFC and its detailed Simulink model is developed using MATLAB and the overall performance analysis is carried out under different operating state of affairs.
文摘Wind energy （WE） has become immensely popular for distributed generation （DG）. This case presents the monitoring, modeling, control, and analysis of the two-level three-phase WE based DG system where the electric grid interfacing custom power device （CPD） is controlled to perform the smart exchanging of electric power as per the Indian grid code. WE is connected to DC link of CPD for the grid integration purpose. The CPD based distributed static compensator, i.e. the distributed static synchronous compensator （DSTATCOM）, is utilized for injecting the wind power to the point of common coupling （PCC） and also acts against the reactive power demand. The novel indirect current control scheme of DSTATCOM regulates the power import and export between the WE and the electric grid system. It also acts as a compensator and performs both the key features simultaneously. Hence, the penetration of additional generated WE power to the grid is increased by 20% to 25%. The burden of reactive power compensation from grid is reduced by DSTATCOM. The modeling and simulation are done in MATLAB. The results are validated and verified.
文摘Controllable saturation reactors are widely used in reactive power compensation. The control system of controllable saturation reactor determines adaption speed, accuracy, and stability. First, an innovative type of controllable saturation reactor is introduced. After that the control system is designed, and a self-tuning algorithm in PID controller is proposed in the paper. The algorithm tunes PID parameters automatically with different error signals caused by varied loads in power system. Then the feasibility of the above algorithm is verified by Simulink module of Matlab software. The results of simulation indicate that the control system can efficiently reduce adaption time and overshoot.
基金The National Science and Technology Sup-port Project (No.2007BAA12B03)
文摘Control strategy affects directly the working performances of dynamic voltage regulator （DVR）. One-cycle control is an effective nonlinear signal modulation control method. In this paper, a new one-cycle control scheme for DVR was proposed in single phase supply system. On the basis of principle analysis, the corresponding one-cycle control model for DVR was built up, which is characterized by simple control circuits, good control performance, and high control precision. As an example, a control model for single-phase DVR was simulated by using Matlab/Simulink and SimPowerSystem. The results show that the load voltage could be compensated quickly at the points of supply voltage stepping down and up, and the relative error was less than 4% in the whole voltage sag process. Both theory analysis and simulation results show that the new one-cycle control scheme for DVR is effective.
文摘随着配电网中分布式光伏(distributed photovoltaic,DPV)大量并网,电压越限和电压波动越来越严重,考虑新型电能质量治理装置的电压无功优化协调控制方法需要进一步完善,以适应电网的新变化。该文考虑了新型柔性有载调压变压器(on-load tap changer,OLTC)的电能质量调节作用,提出一种两阶段电压无功优化协调控制方法,其中一阶段为日前小时级调度阶段,根据分布式光伏和负荷的预测数据,通过潮流计算和迭代优化,获取DPV的有功出力结果、柔性OLTC分接头和电容器组的投切结果;二阶段为分钟级无功优化阶段,在第一阶段的基础上,考虑柔性OLTC和DPV的无功出力特性,调节装备无功出力的同时修正第一阶段电容器组投切组合,进一步降低各个节点最大电压偏差,使配电网电压分布更合理。搭建了IEEE33节点配电系统仿真模型,所提出的考虑柔性OLTC的两阶段电压无功优化协调控制方法能够在常规经济性最优目标下的88.07%DPV消纳水平基础上提高9.29%,同时满足全节点全时段电压偏差小于0.1pu,综合经济性提高7.8%,结果证明了所提方法的合理性和有效性。
