The increasing dependence on data highlights the need for a detailed understanding of its behavior,encompassing the challenges involved in processing and evaluating it.However,current research lacks a comprehensive st...The increasing dependence on data highlights the need for a detailed understanding of its behavior,encompassing the challenges involved in processing and evaluating it.However,current research lacks a comprehensive structure for measuring the worth of data elements,hindering effective navigation of the changing digital environment.This paper aims to fill this research gap by introducing the innovative concept of“data components.”It proposes a graphtheoretic representation model that presents a clear mathematical definition and demonstrates the superiority of data components over traditional processing methods.Additionally,the paper introduces an information measurement model that provides a way to calculate the information entropy of data components and establish their increased informational value.The paper also assesses the value of information,suggesting a pricing mechanism based on its significance.In conclusion,this paper establishes a robust framework for understanding and quantifying the value of implicit information in data,laying the groundwork for future research and practical applications.展开更多
In order to construct the data mining frame for the generic project risk research, the basic definitions of the generic project risk element were given, and then a new model of the generic project risk element was pre...In order to construct the data mining frame for the generic project risk research, the basic definitions of the generic project risk element were given, and then a new model of the generic project risk element was presented with the definitions. From the model, data mining method was used to acquire the risk transmission matrix from the historical databases analysis. The quantitative calculation problem among the generic project risk elements was solved. This method deals with well the risk element transmission problems with limited states. And in order to get the limited states, fuzzy theory was used to discrete the historical data in historical databases. In an example, the controlling risk degree is chosen as P(Rs≥2) ≤0.1, it means that the probability of risk state which is not less than 2 in project is not more than 0.1, the risk element R3 is chosen to control the project, respectively. The result shows that three risk element transmission matrix can be acquired in 4 risk elements, and the frequency histogram and cumulative frequency histogram of each risk element are also given.展开更多
Flexible roll forming is a promising manufacturing method for the production of variable cross section products. Considering the large plastic strain in this forming process which is much larger than that of uniform d...Flexible roll forming is a promising manufacturing method for the production of variable cross section products. Considering the large plastic strain in this forming process which is much larger than that of uniform deformation phase of uniaxial tensile test, the widely adopted method of simulating the forming processes with non-supplemented material data from uniaxial tensile test will certainly lead to large error. To reduce this error, the material data is supplemented based on three constitutive models. Then a finite element model of a six passes flexible roll forming process is established based on the supplemented material data and the original material data from the uniaxial tensile test. The flexible roll forming experiment of a B pillar reinforcing plate is carried out to verify the proposed method. Final cross section shapes of the experimental and the simulated results are compared. It is shown that the simulation calculated with supplemented material data based on Swift model agrees well with the experimental results, while the simulation based on original material data could not predict the actual deformation accurately. The results indicate that this material supplement method is reliable and indispensible, and the simulation model can well reflect the real metal forming process. Detailed analysis of the distribution and history of plastic strain at different positions are performed. A new material data supplement method is proposed to tackle the problem which is ignored in other roll forming simulations, and thus the forming process simulation accuracy can be greatly improved.展开更多
A multivariate statistical analysis was performed on multi-element soil geochemical data from the Koda Hill-Bulenga gold prospects in the Wa-Lawra gold belt, northwest Ghana. The objectives of the study were to define...A multivariate statistical analysis was performed on multi-element soil geochemical data from the Koda Hill-Bulenga gold prospects in the Wa-Lawra gold belt, northwest Ghana. The objectives of the study were to define gold relationships with other trace elements to determine possible pathfinder elements for gold from the soil geochemical data. The study focused on seven elements, namely, Au, Fe, Pb, Mn, Ag, As and Cu. Factor analysis and hierarchical cluster analysis were performed on the analyzed samples. Factor analysis explained 79.093% of the total variance of the data through three factors. This had the gold factor being factor 3, having associations of copper, iron, lead and manganese and accounting for 20.903% of the total variance. From hierarchical clustering, gold was also observed to be clustering with lead, copper, arsenic and silver. There was further indication that, gold concentrations were lower than that of its associations. It can be inferred from the results that, the occurrence of gold and its associated elements can be linked to both primary dispersion from underlying rocks and secondary processes such as lateritization. This data shows that Fe and Mn strongly associated with gold, and alongside Pb, Ag, As and Cu, these elements can be used as pathfinders for gold in the area, with ferruginous zones as targets.展开更多
In order to archive, quality control and disseminate a large variety of marine data in a marine data exchange platfonn, a marine XML has been developed to encapsulate marine data, which provides an efficient means to ...In order to archive, quality control and disseminate a large variety of marine data in a marine data exchange platfonn, a marine XML has been developed to encapsulate marine data, which provides an efficient means to store, transfer and display marine data. This paper first presents the details of the main marine XML elements and then gives an example showing how to transform CTD-observed data into Marine XML format, which illustrates the XML encapsulation process of marine observed data.展开更多
This report analyzes the existing problems in terminology referring to clinical symptoms of traditional Chinese medicine(TCM)from the viewpoint of data sharing and elaborates the necessity of establishing a standard d...This report analyzes the existing problems in terminology referring to clinical symptoms of traditional Chinese medicine(TCM)from the viewpoint of data sharing and elaborates the necessity of establishing a standard directory of clinical data elements of TCM.We evaluated the principles and methods of data element extraction according to the status quo of the clinical information system and characteristics of symptoms for TCM and consequently proposed a three-layer model for optimal extraction.展开更多
For digitalization of traditional Chinese medicine(TCM),research is being conducted on objectivization of diagnosis and treatment,mathematical models of TCM theories,and application of modern information technology to...For digitalization of traditional Chinese medicine(TCM),research is being conducted on objectivization of diagnosis and treatment,mathematical models of TCM theories,and application of modern information technology to digitize the vast amounts of existing information.However,the author believes that TCM practitioners should first conduct a systematic and comprehensive refined analysis on the knowledge of TCM and unify data elements used in computer intelligence to avoid ambiguity.Thus,we must overcome the epistemological constraints and carefully analyze the relationship among data elements to achieve systematic results and administer TCM appropriately.展开更多
Contemporary mainstream big data governance platforms are built atop the big data ecosystem components,offering a one-stop development and analysis governance platform for the collection,transmission,storage,cleansing...Contemporary mainstream big data governance platforms are built atop the big data ecosystem components,offering a one-stop development and analysis governance platform for the collection,transmission,storage,cleansing,transformation,querying and analysis,data development,publishing,and subscription,sharing and exchange,management,and services of massive data.These platforms serve various role members who have internal and external data needs.However,in the era of big data,the rapid update and iteration of big data technologies,the diversification of data businesses,and the exponential growth of data present more challenges and uncertainties to the construction of big data governance platforms.This paper discusses how to effectively build a data governance platform under the big data system from the perspectives of functional architecture,logical architecture,data architecture,and functional design.展开更多
Exploiting mobile elements （MEs） to accomplish data collection in wireless sensor networks （WSNs） can improve the energy efficiency of sensor nodes, and prolong network lifetime. However, it will lead to large dat...Exploiting mobile elements （MEs） to accomplish data collection in wireless sensor networks （WSNs） can improve the energy efficiency of sensor nodes, and prolong network lifetime. However, it will lead to large data collection latency for the network, which is unacceptable for data-critical applications. In this paper, we address this problem by minimizing the traveling length of MEs. Our methods mainly consist of two steps： we first construct a virtual grid network and select the minimal stop point set （SPS） from it; then, we make optimal scheduling for the MEs based on the SPS in order to minimize their traveling length. Different implementations of genetic algorithm （GA） are used to solve the problem. Our methods are evaluated by extensive simulations. The results show that these methods can greatly reduce the traveling length of MEs, and decrease the data collection latency.展开更多
In existing web services-based workflow, data exchanging across the web services is centralized, the workflow engine intermediates at each step of the application sequence. However, many grid applications, especially ...In existing web services-based workflow, data exchanging across the web services is centralized, the workflow engine intermediates at each step of the application sequence. However, many grid applications, especially data intensive scientific applications, require exchanging large amount of data across the grid services. Having a central workflow engine relay the data between the services would resu＇lts in a bottleneck in these cases. This paper proposes a data exchange model for individual grid workflow and multiworkflows composition respectively. The model enables direct communication for large amounts of data between two grid services. To enable data to exchange among multiple workflows, the bridge data service is used.展开更多
For the regression model about longitudinal data, we combine the robust estimation equation with the elemental empirical likelihood method, and propose an efficient robust estimator, where the robust estimation equati...For the regression model about longitudinal data, we combine the robust estimation equation with the elemental empirical likelihood method, and propose an efficient robust estimator, where the robust estimation equation is based on bounded scoring function and the covariate depended weight function. This method reduces the influence of outliers in response variables and covariates on parameter estimation, takes into account the correlation between data, and improves the efficiency of estimation. The simulation results show that the proposed method is robust and efficient.展开更多
In this paper, in order to implement the share and exchange of the ship product data, a new kind of global function model is established. By researching on the development and trend of the application of ship STEP (st...In this paper, in order to implement the share and exchange of the ship product data, a new kind of global function model is established. By researching on the development and trend of the application of ship STEP (standard for the exchange of product model data) standards, the AIM (application interpreted model) of AP216 is developed and improved as an example, aiming at the characteristics and practical engineering of ship industry in our country. The data exchange interfaces are formed based on STEP in the CAD/CAM for the ship by all function modules and shared databases under the global function model. The share and exchange of all information and data are solved in the design, manufacture and all life-cycle of ship products among different computer application systems. The research work makes foundation for the ship industry informatization.展开更多
The high-pressure hydrogenation heat exchanger is an impoltmlt equipment of the refinery, but it is exposed tothe problem of leakage caused by ammonium salt corrosion. Therefore, it is very important to evaluate the o...The high-pressure hydrogenation heat exchanger is an impoltmlt equipment of the refinery, but it is exposed tothe problem of leakage caused by ammonium salt corrosion. Therefore, it is very important to evaluate the operating statusof flae hydrogenation heat exchanger. To improve flae method for evaluating the operating status of hydrogenation heat ex-chmagers by using flae traditional method, flais paper proposes a new method for evaluating the operation of hydrogenationheat exchangers based on big data. To address flae noisy data common in flae industry, this paper proposes an automatednoisy interval detection algorithm. To deal with flae problem that the sensor parameters have voluminous and mtrelateddimensions, flais paper proposes a key parameter detection algorithm based on flae Pearson correlation coefficient. Finally,this paper presents a system-based health scoring algorithm based on PCA （Principal Component Analysis） to assist site op-erators in assessing the healfla of hydrogenation heat exchangers. The evaluation of flae operating status of flae hydrorefiningheat exchange device based on big data technology will help the operators to more accurately grasp the status of flae indus-trial system mad have positive guiding significance for the early warning offlae failure.展开更多
The first plan on data elements since the listing of the National Bureau of Data of China has been released.On December 15th,2023,the National Bureau of Data of China drafted the Three-year Plan for“Data Elements X”...The first plan on data elements since the listing of the National Bureau of Data of China has been released.On December 15th,2023,the National Bureau of Data of China drafted the Three-year Plan for“Data Elements X”(2024-2026)(Exposure Draft),and solicited opinions from the public.展开更多
Working toward an efficient duration and timeline for the preconstruction phase should be one of the main objectives for project owners.Failing to plan for and coordinate preconstruction decisions in order to control ...Working toward an efficient duration and timeline for the preconstruction phase should be one of the main objectives for project owners.Failing to plan for and coordinate preconstruction decisions in order to control preconstruction duration and manage time variances can lead to financial insecurities,incomplete contract documents,permitting issues,and unrealistic schedules and resource allocation during this phase.To minimize time variances and ensure a productive decision-making process,project owners should be familiar with critical elements in a project that cause variances in the preconstruction phase timeline.In this study,the impacts of eleven critical preconstruction elements on time variances were analyzed.These eleven preconstruction elements are considered critical in how they impact time variances during the preconstruction phase.They were determined to be critical based either on significantly impacting time variance during the preconstruction phase or believed to be critical from findings from previous studies,however,the findings from this study showed no significant impact on the time variances.In most previous studies focusing on the elements impacting project schedules,data were collected by surveying construction professionals.In this study,objective and quantitative data related to project preconstruction elements were used as opposed to self-reported data.Using the results of this study,project owners and stakeholders will be able to evaluate the critical preconstruction elements impacting the timing of their projects and prioritize decisions related to the critical elements early on during the preconstruction phase.展开更多
Objectives:The aim of this study was to investigate and develop a data storage and exchange format for the process of automatic systematic reviews(ASR)of traditional Chinese medicine(TCM).Methods:A lightweight and com...Objectives:The aim of this study was to investigate and develop a data storage and exchange format for the process of automatic systematic reviews(ASR)of traditional Chinese medicine(TCM).Methods:A lightweight and commonly used data format,namely,JavaScript Object Notation(JSON),was introduced in this study.We designed a fully described data structure to collect TCM clinical trial information based on the JSON syntax.Results:A smart and powerful data format,JSON-ASR,was developed.JSON-ASR uses a plain-text data format in the form of key/value pairs and consists of six sections and more than 80 preset pairs.JSON-ASR adopts extensible structured arrays to support the situations of multi-groups and multi-outcomes.Conclusion:JSON-ASR has the characteristics of light weight,flexibility,and good scalability,which is suitable for the complex data of clinical evidence.展开更多
On Nov.4^(th), AQSIQ (General Administration of Quality Supervision,Inspection and Quarantine of the People' s Republic of China), SAC (Standardization Administrationof China), National Audit Office of China (CNAO...On Nov.4^(th), AQSIQ (General Administration of Quality Supervision,Inspection and Quarantine of the People' s Republic of China), SAC (Standardization Administrationof China), National Audit Office of China (CNAO), and National Ministry of Finance of China jointlyheld the conference press on the national standard of Information Technology--Data Interface ofAccounting Software (GB/T 19581-2004) in Beijing. The standard was approved and issued on Sept. 20,2004 by AQSIQ and SAC, and it would come into effect all over the whole nation from January 1^(st),2005. Pu Changcheng, Vice Director of AQSIQ, Shi Aizhong, Vice Director of CNAO, Li Zhonghai. amember of the Party Group of AQSIQ and Director of SAC, the other leaders of concerned departmentssuch as National Ministry of Finance, National Telegraphy Office, and etc. attended the ConferencePress and made speeches. They fully affirmed the important significance and the achievements onstandardization work of electronic government business, and also they set new demands on the workfor the future.展开更多
基金supported by the EU H2020 Research and Innovation Program under the Marie Sklodowska-Curie Grant Agreement(Project-DEEP,Grant number:101109045)National Key R&D Program of China with Grant number 2018YFB1800804+2 种基金the National Natural Science Foundation of China(Nos.NSFC 61925105,and 62171257)Tsinghua University-China Mobile Communications Group Co.,Ltd,Joint Institutethe Fundamental Research Funds for the Central Universities,China(No.FRF-NP-20-03)。
文摘The increasing dependence on data highlights the need for a detailed understanding of its behavior,encompassing the challenges involved in processing and evaluating it.However,current research lacks a comprehensive structure for measuring the worth of data elements,hindering effective navigation of the changing digital environment.This paper aims to fill this research gap by introducing the innovative concept of“data components.”It proposes a graphtheoretic representation model that presents a clear mathematical definition and demonstrates the superiority of data components over traditional processing methods.Additionally,the paper introduces an information measurement model that provides a way to calculate the information entropy of data components and establish their increased informational value.The paper also assesses the value of information,suggesting a pricing mechanism based on its significance.In conclusion,this paper establishes a robust framework for understanding and quantifying the value of implicit information in data,laying the groundwork for future research and practical applications.
基金Project(70572090) supported by the National Natural Science Foundation of China
文摘In order to construct the data mining frame for the generic project risk research, the basic definitions of the generic project risk element were given, and then a new model of the generic project risk element was presented with the definitions. From the model, data mining method was used to acquire the risk transmission matrix from the historical databases analysis. The quantitative calculation problem among the generic project risk elements was solved. This method deals with well the risk element transmission problems with limited states. And in order to get the limited states, fuzzy theory was used to discrete the historical data in historical databases. In an example, the controlling risk degree is chosen as P(Rs≥2) ≤0.1, it means that the probability of risk state which is not less than 2 in project is not more than 0.1, the risk element R3 is chosen to control the project, respectively. The result shows that three risk element transmission matrix can be acquired in 4 risk elements, and the frequency histogram and cumulative frequency histogram of each risk element are also given.
基金Supported by National Natural Science Foundation of China(Grant Nos.51205004,51475003)Beijing Municipal Natural Science Foundation of China(Grant No.3152010)Beijing Municipal Education Committee Science and Technology Program,China(Grant No.KM201510009004)
文摘Flexible roll forming is a promising manufacturing method for the production of variable cross section products. Considering the large plastic strain in this forming process which is much larger than that of uniform deformation phase of uniaxial tensile test, the widely adopted method of simulating the forming processes with non-supplemented material data from uniaxial tensile test will certainly lead to large error. To reduce this error, the material data is supplemented based on three constitutive models. Then a finite element model of a six passes flexible roll forming process is established based on the supplemented material data and the original material data from the uniaxial tensile test. The flexible roll forming experiment of a B pillar reinforcing plate is carried out to verify the proposed method. Final cross section shapes of the experimental and the simulated results are compared. It is shown that the simulation calculated with supplemented material data based on Swift model agrees well with the experimental results, while the simulation based on original material data could not predict the actual deformation accurately. The results indicate that this material supplement method is reliable and indispensible, and the simulation model can well reflect the real metal forming process. Detailed analysis of the distribution and history of plastic strain at different positions are performed. A new material data supplement method is proposed to tackle the problem which is ignored in other roll forming simulations, and thus the forming process simulation accuracy can be greatly improved.
文摘A multivariate statistical analysis was performed on multi-element soil geochemical data from the Koda Hill-Bulenga gold prospects in the Wa-Lawra gold belt, northwest Ghana. The objectives of the study were to define gold relationships with other trace elements to determine possible pathfinder elements for gold from the soil geochemical data. The study focused on seven elements, namely, Au, Fe, Pb, Mn, Ag, As and Cu. Factor analysis and hierarchical cluster analysis were performed on the analyzed samples. Factor analysis explained 79.093% of the total variance of the data through three factors. This had the gold factor being factor 3, having associations of copper, iron, lead and manganese and accounting for 20.903% of the total variance. From hierarchical clustering, gold was also observed to be clustering with lead, copper, arsenic and silver. There was further indication that, gold concentrations were lower than that of its associations. It can be inferred from the results that, the occurrence of gold and its associated elements can be linked to both primary dispersion from underlying rocks and secondary processes such as lateritization. This data shows that Fe and Mn strongly associated with gold, and alongside Pb, Ag, As and Cu, these elements can be used as pathfinders for gold in the area, with ferruginous zones as targets.
基金funds of Ocean University of China Research Initiation Grant and the National 908 Project entitled ‘Marine Information Exchange and Integration Technology Based on XML’ (No 908-03-01-07)
文摘In order to archive, quality control and disseminate a large variety of marine data in a marine data exchange platfonn, a marine XML has been developed to encapsulate marine data, which provides an efficient means to store, transfer and display marine data. This paper first presents the details of the main marine XML elements and then gives an example showing how to transform CTD-observed data into Marine XML format, which illustrates the XML encapsulation process of marine observed data.
基金funding support from the Innovation Platform Open Fund Project of Hunan Provincial Universities (No. 13K076)National Key Discipline Open Fund Project of TCM diagnostics in Hunan University of Chinese Medicine (2015zyzd18)
文摘This report analyzes the existing problems in terminology referring to clinical symptoms of traditional Chinese medicine(TCM)from the viewpoint of data sharing and elaborates the necessity of establishing a standard directory of clinical data elements of TCM.We evaluated the principles and methods of data element extraction according to the status quo of the clinical information system and characteristics of symptoms for TCM and consequently proposed a three-layer model for optimal extraction.
基金the funding support from the National Natural Science Foundation of China(No.81373702)
文摘For digitalization of traditional Chinese medicine(TCM),research is being conducted on objectivization of diagnosis and treatment,mathematical models of TCM theories,and application of modern information technology to digitize the vast amounts of existing information.However,the author believes that TCM practitioners should first conduct a systematic and comprehensive refined analysis on the knowledge of TCM and unify data elements used in computer intelligence to avoid ambiguity.Thus,we must overcome the epistemological constraints and carefully analyze the relationship among data elements to achieve systematic results and administer TCM appropriately.
文摘Contemporary mainstream big data governance platforms are built atop the big data ecosystem components,offering a one-stop development and analysis governance platform for the collection,transmission,storage,cleansing,transformation,querying and analysis,data development,publishing,and subscription,sharing and exchange,management,and services of massive data.These platforms serve various role members who have internal and external data needs.However,in the era of big data,the rapid update and iteration of big data technologies,the diversification of data businesses,and the exponential growth of data present more challenges and uncertainties to the construction of big data governance platforms.This paper discusses how to effectively build a data governance platform under the big data system from the perspectives of functional architecture,logical architecture,data architecture,and functional design.
基金supported by Tianjin Municipal Information Industry Office (No. 082044012)
文摘Exploiting mobile elements （MEs） to accomplish data collection in wireless sensor networks （WSNs） can improve the energy efficiency of sensor nodes, and prolong network lifetime. However, it will lead to large data collection latency for the network, which is unacceptable for data-critical applications. In this paper, we address this problem by minimizing the traveling length of MEs. Our methods mainly consist of two steps： we first construct a virtual grid network and select the minimal stop point set （SPS） from it; then, we make optimal scheduling for the MEs based on the SPS in order to minimize their traveling length. Different implementations of genetic algorithm （GA） are used to solve the problem. Our methods are evaluated by extensive simulations. The results show that these methods can greatly reduce the traveling length of MEs, and decrease the data collection latency.
基金Supported by the National Natural Science Foun-dation of China(60373072)
文摘In existing web services-based workflow, data exchanging across the web services is centralized, the workflow engine intermediates at each step of the application sequence. However, many grid applications, especially data intensive scientific applications, require exchanging large amount of data across the grid services. Having a central workflow engine relay the data between the services would resu＇lts in a bottleneck in these cases. This paper proposes a data exchange model for individual grid workflow and multiworkflows composition respectively. The model enables direct communication for large amounts of data between two grid services. To enable data to exchange among multiple workflows, the bridge data service is used.
文摘For the regression model about longitudinal data, we combine the robust estimation equation with the elemental empirical likelihood method, and propose an efficient robust estimator, where the robust estimation equation is based on bounded scoring function and the covariate depended weight function. This method reduces the influence of outliers in response variables and covariates on parameter estimation, takes into account the correlation between data, and improves the efficiency of estimation. The simulation results show that the proposed method is robust and efficient.
基金Supported by Commission of the Basic ResearchScience and Technology for National Defence ( No.B192001C001).
文摘In this paper, in order to implement the share and exchange of the ship product data, a new kind of global function model is established. By researching on the development and trend of the application of ship STEP (standard for the exchange of product model data) standards, the AIM (application interpreted model) of AP216 is developed and improved as an example, aiming at the characteristics and practical engineering of ship industry in our country. The data exchange interfaces are formed based on STEP in the CAD/CAM for the ship by all function modules and shared databases under the global function model. The share and exchange of all information and data are solved in the design, manufacture and all life-cycle of ship products among different computer application systems. The research work makes foundation for the ship industry informatization.
基金supported by the National Natural Science Foundation of China (U1534201)the open project of Science and Technology on Communication Networks Laboratorythe National Key Research and Development Program of China (2016QY01W0200)
文摘The high-pressure hydrogenation heat exchanger is an impoltmlt equipment of the refinery, but it is exposed tothe problem of leakage caused by ammonium salt corrosion. Therefore, it is very important to evaluate the operating statusof flae hydrogenation heat exchanger. To improve flae method for evaluating the operating status of hydrogenation heat ex-chmagers by using flae traditional method, flais paper proposes a new method for evaluating the operation of hydrogenationheat exchangers based on big data. To address flae noisy data common in flae industry, this paper proposes an automatednoisy interval detection algorithm. To deal with flae problem that the sensor parameters have voluminous and mtrelateddimensions, flais paper proposes a key parameter detection algorithm based on flae Pearson correlation coefficient. Finally,this paper presents a system-based health scoring algorithm based on PCA （Principal Component Analysis） to assist site op-erators in assessing the healfla of hydrogenation heat exchangers. The evaluation of flae operating status of flae hydrorefiningheat exchange device based on big data technology will help the operators to more accurately grasp the status of flae indus-trial system mad have positive guiding significance for the early warning offlae failure.
文摘The first plan on data elements since the listing of the National Bureau of Data of China has been released.On December 15th,2023,the National Bureau of Data of China drafted the Three-year Plan for“Data Elements X”(2024-2026)(Exposure Draft),and solicited opinions from the public.
文摘Working toward an efficient duration and timeline for the preconstruction phase should be one of the main objectives for project owners.Failing to plan for and coordinate preconstruction decisions in order to control preconstruction duration and manage time variances can lead to financial insecurities,incomplete contract documents,permitting issues,and unrealistic schedules and resource allocation during this phase.To minimize time variances and ensure a productive decision-making process,project owners should be familiar with critical elements in a project that cause variances in the preconstruction phase timeline.In this study,the impacts of eleven critical preconstruction elements on time variances were analyzed.These eleven preconstruction elements are considered critical in how they impact time variances during the preconstruction phase.They were determined to be critical based either on significantly impacting time variance during the preconstruction phase or believed to be critical from findings from previous studies,however,the findings from this study showed no significant impact on the time variances.In most previous studies focusing on the elements impacting project schedules,data were collected by surveying construction professionals.In this study,objective and quantitative data related to project preconstruction elements were used as opposed to self-reported data.Using the results of this study,project owners and stakeholders will be able to evaluate the critical preconstruction elements impacting the timing of their projects and prioritize decisions related to the critical elements early on during the preconstruction phase.
基金the National Key R&D Program of China(Grant no.2019YFC1709803)National Natural Science Foundation of China(Grant no.81873183).
文摘Objectives:The aim of this study was to investigate and develop a data storage and exchange format for the process of automatic systematic reviews(ASR)of traditional Chinese medicine(TCM).Methods:A lightweight and commonly used data format,namely,JavaScript Object Notation(JSON),was introduced in this study.We designed a fully described data structure to collect TCM clinical trial information based on the JSON syntax.Results:A smart and powerful data format,JSON-ASR,was developed.JSON-ASR uses a plain-text data format in the form of key/value pairs and consists of six sections and more than 80 preset pairs.JSON-ASR adopts extensible structured arrays to support the situations of multi-groups and multi-outcomes.Conclusion:JSON-ASR has the characteristics of light weight,flexibility,and good scalability,which is suitable for the complex data of clinical evidence.
文摘On Nov.4^(th), AQSIQ (General Administration of Quality Supervision,Inspection and Quarantine of the People' s Republic of China), SAC (Standardization Administrationof China), National Audit Office of China (CNAO), and National Ministry of Finance of China jointlyheld the conference press on the national standard of Information Technology--Data Interface ofAccounting Software (GB/T 19581-2004) in Beijing. The standard was approved and issued on Sept. 20,2004 by AQSIQ and SAC, and it would come into effect all over the whole nation from January 1^(st),2005. Pu Changcheng, Vice Director of AQSIQ, Shi Aizhong, Vice Director of CNAO, Li Zhonghai. amember of the Party Group of AQSIQ and Director of SAC, the other leaders of concerned departmentssuch as National Ministry of Finance, National Telegraphy Office, and etc. attended the ConferencePress and made speeches. They fully affirmed the important significance and the achievements onstandardization work of electronic government business, and also they set new demands on the workfor the future.
