期刊文献+
共找到532篇文章
< 1 2 27 >
每页显示 20 50 100
Quadrature Method of Moments for Nanoparticle Coagulation and Diffusion in the Planar Impinging Jet Flow 被引量:5
1
作者 于明州 林建忠 熊红兵 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2007年第6期828-836,共9页
A computational model combining large .eddy simulation with quadrature moment method was em-ployed to study nanoparticle evolution in a confined impinging jet. The investigated particle size is limited in the transien... A computational model combining large .eddy simulation with quadrature moment method was em-ployed to study nanoparticle evolution in a confined impinging jet. The investigated particle size is limited in the transient regime, and the particle collision kernel was obtained by using the theory of flux matching. The simulation was validated by comparing it with the experimental results. The numerical results show coherent structure acts to dominate particle number intensity, size and polydispersity distributions, and it also induce particle-laden iet to be diluted by .the ambient.The evolution of particle dynarnics in.the impinging jet flow are strongly related to the Rey-nolds number and nozzle-to-plate distance, and their relationships were analyzed. 展开更多
关键词 NANOPARTICLE coagulation impinging jet large eddy simulation quadrature moment method
在线阅读 下载PDF
Nanoparticle Transport and Coagulation in Bends of Circular Cross Section via a New Moment Method 被引量:4
2
作者 林建忠 林培锋 +1 位作者 于明州 陈华军 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2010年第1期1-9,共9页
Transport of nanoparticles and coagulation is simulated with the combination of CFD in a circular bend. The Taylor-expansion moment method(TEMOM)is employed to study dynamics of nanoparticles with Brownian motion,base... Transport of nanoparticles and coagulation is simulated with the combination of CFD in a circular bend. The Taylor-expansion moment method(TEMOM)is employed to study dynamics of nanoparticles with Brownian motion,based on the flow field from numerical simulation.A fully developed flow pattern in the present simulation is compared with previous numerical results for validating the model and computational code.It is found that for the simulated particulate flow system,the particle mass concentration,number concentration,particle polydispersity, mean particle diameter and geometric standard deviation over cross-section increase with time.The distribution of particle mass concentration at different time is independent of the initial particle size.More particles are concen-trated at outer edge of the bend.Coagulation plays more important role at initial stage than that in the subsequent period.The increase of Reynolds number and initial particle size leads to the increase of particle number concentration.The particle polydispersity,mean particle diameter and geometric standard deviation increase with decreasing Reynolds number and initial particle size. 展开更多
关键词 NANOPARTICLE coagulation transport flow in bend moment method
在线阅读 下载PDF
Nanoparticle coagulation in a planar jet via moment method 被引量:2
3
作者 于明州 林建忠 陈丽华 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2007年第11期1445-1453,共9页
Large eddy simulations of nanoparticle coagulation in an incompressible planar jet were performed. The particle is described using a moment method to approximate the particle general dynarnics equations. The time-aver... Large eddy simulations of nanoparticle coagulation in an incompressible planar jet were performed. The particle is described using a moment method to approximate the particle general dynarnics equations. The time-averaged results based on 3000 time steps for every case were obtained to explore the influence of the Schmidt number and the Damkohler number on the nanoparticle dynamics. The results show that the changes of Schmidt number have the influence on the number concentration of nanoparticles only when the particle diameter is less than 1 nm for the fixed gas parameters. The number concentration of particles for small particles decreases more rapidly along the flow direction, and the nanoparticles with larger Schmidt number have a narrower distribution along the transverse direction. The smaller nanoparticles Coagulate and disperse easily, grow rapidly hence show a stronger polydispersity. The smaller coagulation time scale can enhance the particle collision and coagulation. Frequented collision and coagulation bring a great increase in particle size. The larger the Damkohler number is, the higher the particle polydispersity is. 展开更多
关键词 NANOPARTICLES coagulation planar jet moment method large eddy simulation
在线阅读 下载PDF
Simulation of the Brownian coagulation of nanoparticles with initial bimodal size distribution via moment method 被引量:1
4
作者 Jian-Zhong Lin Fu-Jun Gan 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2012年第5期1227-1237,共11页
The Brownian coagulation of nanoparticles with initial bimodal size distribution, i.e., mode i and j, is numerically studied using the moment method. Evolutions of particle number concentration, geometric average diam... The Brownian coagulation of nanoparticles with initial bimodal size distribution, i.e., mode i and j, is numerically studied using the moment method. Evolutions of particle number concentration, geometric average diameter and geometric standard deviation are given in the free molecular regime, the continuum regime, the free molecular regime and transition regime, the free molecular regime and continuum regime, respectively. The results show that, both in the free molecular regime and the continuum regime, the num- ber concentration of mode i and j decreases with increasing time. The evolutions of particle geometric average diameter with different initial size distribution are quite different. Both intra-modal and inter-modal coagulation finally make the polydispersed size distribution become monodispersed. As time goes by, the size distribution with initial bimodal turns to be unimoda/and shifts to a larger particle size range. In the free molecular regime and transition regime, the inter- modal coagulation becomes dominant when the number concentrations of mode i and j are of the same order. The effects of the number concentration of mode i and mode j on the evolution of geometric average diameter of mode j are negligible, while the effects of the number concentration of mode j on the evolution of geometric average diameter of mode j is distinct. In the free molecular regime and continuum regime, the higher the initial number concentration of mode j, the more obvious the variation of the number concentration of mode i. 展开更多
关键词 Nanoparticles - Brownian coagulation. Bimodalsize distribution Moment method
在线阅读 下载PDF
Direct Monte Carlo Method Simulation of the Synthesis of Carbon Particle Through Coagulation in the Detonation of Explosives
5
作者 马峰 恽寿榕 黄风雷 《Journal of Beijing Institute of Technology》 EI CAS 2003年第3期278-281,共4页
A model is constructed and used in computing the coagulation probability of free carbon during the detonation of explosives. A direct simulation Monte Carlo (DSMC) program is constructed to simulate the coagulation of... A model is constructed and used in computing the coagulation probability of free carbon during the detonation of explosives. A direct simulation Monte Carlo (DSMC) program is constructed to simulate the coagulation of free carbon particles. The evaluation of the distribution spectrum of particles in the system is obtained. The simulation result is consistent with the experimental curve. 展开更多
关键词 Monte Carlo method DSMC ultrafine particle coagulation
在线阅读 下载PDF
Properties and coagulation mechanisms of polyferric silicate sulfate with high concentration 被引量:10
6
作者 SONG Zhiwei REN Nanqi 《Journal of Environmental Sciences》 SCIE EI CAS CSCD 2008年第2期129-134,共6页
Polyferric silicate sulfate (PFSS) with high concentration was prepared using the composite-poly method. The coagulation properties and mechanisms of this new complex were probed using TEM, Fe-Ferron timed complex-c... Polyferric silicate sulfate (PFSS) with high concentration was prepared using the composite-poly method. The coagulation properties and mechanisms of this new complex were probed using TEM, Fe-Ferron timed complex-colorimetric method, and infrared spectrum method. The results showed that the flocculating effect of polyferric silicate sulfate had an advantage over polyferric sulfate (PFS), as the optimum coagulation effect could be obtained when the Si/Fe mole ratio was 0.75 in accordance with its macrostructure of PFSS. According to the Fe-Ferron timed complex-colorimetric method, the Si species was mainly Sic, whereas, the Fe species were Fea and Fec in the copolymerization system. The infrared spectra indicated that the structure of these new flocculants was formed by polymers, mainly by olation, which was different from polyferric sulfate, and the vibration of M-OH-M of around 1100 cm^-1, also proved that there existed Fe-OH-Fe and its polymers in some forms. 展开更多
关键词 polyferric silicate sulfate coagulation mechanisms MICROSTRUCTURE species distribution timed complex-colorimetric method
在线阅读 下载PDF
Nanoparticle nucleation and coagulation in a mixing layer 被引量:4
7
作者 Jian-Zhong Lin Yan-Hua Liu 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2010年第4期521-529,共9页
Numerical simulation of nanoparticle nucleation and coagulation in a mixing layer with sulfuric acid vapor binary system is performed using the large eddy simulation and the direct quadrature method of moment. The dis... Numerical simulation of nanoparticle nucleation and coagulation in a mixing layer with sulfuric acid vapor binary system is performed using the large eddy simulation and the direct quadrature method of moment. The distributions of number concentration, volume concentration, and average diameter of nanoparticles are obtained. The results show that the coherent structures have an important effect on the distributions of number concentration, volume concentration and average diameter of nanoparticles via continuously transporting and diffusing the nanoparticles to the area of low particle concentration. In the streamwise direction, the number concentration of nanoparticles decreases, while the volume concentration and the average diameter increase. The distributions of number concentration, volume concentration and average diameter of nanoparticles are spatially inhomogeneous. The characteristic time of nucleation is shorter than that of coagulation. The nucleation takes place more easily in the area of low temperature because where the number concentration of nanoparticles is high, while the intensity of coagulation is mainly affected by the number concentration. Both nucleation and coagulation result in the variation of average diameter of nanoparticles. 展开更多
关键词 Nanoparticles Nucleation - coagulation Mixing layer Direct quadrature method of moment
在线阅读 下载PDF
倒置A^(2)/O+A生化法+膜法+磁混凝法污水处理工程实例
8
作者 计建洪 耿学坚 +2 位作者 王丽聪 杭彩云 庄惠生 《印染》 北大核心 2025年第1期64-67,共4页
采用“倒置A^(2)/O+A生化法+膜法+磁混凝物化法”组合工艺处理污水,分析了工艺特点,并详述了主要构筑物及设备参数。该组合工艺处理效果优良,除磷脱氮效果好,出水COD、TP、NH_(3)-N、TN月均值分别为28、0.2、0.3、6.06mg/L,达到了DB32/1... 采用“倒置A^(2)/O+A生化法+膜法+磁混凝物化法”组合工艺处理污水,分析了工艺特点,并详述了主要构筑物及设备参数。该组合工艺处理效果优良,除磷脱氮效果好,出水COD、TP、NH_(3)-N、TN月均值分别为28、0.2、0.3、6.06mg/L,达到了DB32/1072—2018《太湖地区城镇污水处理厂及重点工业行业主要水污染物排放限值》其他区域污染物排放标准,其中COD、TP和NH_(3)-N三个指标达到了GB3838—2002《地表水环境质量标准》Ⅳ类水排放标准。 展开更多
关键词 废水处理 倒置A^(2)/O 除磷脱氮 磁混凝沉淀 膜法
在线阅读 下载PDF
基于响应曲面法的尾煤泥混凝-絮凝沉降试验研究
9
作者 毛新茹 孙利青 +5 位作者 孙倩云 杨北记 杨硕 王飞飞 胡刚 李琳 《选煤技术》 2025年第1期9-17,共9页
选煤厂尾煤泥具有粒度细且黏土含量高的特点,一直存在着无法高效沉降的难题。为提高沉降效果,以新汶矿业集团下属选煤厂尾煤泥为研究对象,探索了絮凝剂单独作用以及混凝剂与絮凝剂的协同作用对尾煤泥沉降性能的影响,结果表明絮凝剂单独... 选煤厂尾煤泥具有粒度细且黏土含量高的特点,一直存在着无法高效沉降的难题。为提高沉降效果,以新汶矿业集团下属选煤厂尾煤泥为研究对象,探索了絮凝剂单独作用以及混凝剂与絮凝剂的协同作用对尾煤泥沉降性能的影响,结果表明絮凝剂单独作用时,沉降速度低于混凝剂与絮凝剂的协同作用。基于混凝-絮凝沉降试验结果,进一步通过响应曲面法优化了组合药剂作用下尾煤泥沉降的药剂制度,结果表明:混凝剂用量对初始沉降速度及上清液浊度的影响显著性均大于絮凝剂用量和两药剂添加间隔时间;随混凝剂用量的增加,尾煤泥的初始沉降速度呈先增加后下降的趋势,而上清液浊度则呈现先减小后增加的趋势;响应曲面法优化后的试验范围内最佳沉降条件为药剂添加间隔时间为60s,混凝剂用量为72.16g/t,絮凝剂用量为99.9g/t,此时模型预测尾煤泥的沉降速度为65.03cm/min,浊度为11.52NTU,模型准确度较高,能够较好地用来优化尾煤泥的沉降效果。分形维数分析结果表明,铵盐混凝剂KD-1和絮凝剂APAM的联用可以增加絮体分形维数以及絮凝体结构的密实度。 展开更多
关键词 煤泥水沉降 尾煤泥 组合药剂 混凝剂 响应曲面法 沉降速度 上清液浊度
在线阅读 下载PDF
基于“肝主凝血”分析收敛法防治出血性疾病
10
作者 林仕高 杨苗苗 +1 位作者 伍大华 谢乐 《中医药导报》 2025年第1期164-168,共5页
从古籍论述、现代医家经验及现代研究探讨“肝主凝血”在出血性疾病中的运用,为丰富出血性疾病的中医药治疗手段及今后“肝主凝血”的研究提供一定的参考及思路。肝阴、肝气充足,肝之疏泄适度,情志平和等因素决定了“肝主凝血”功能的... 从古籍论述、现代医家经验及现代研究探讨“肝主凝血”在出血性疾病中的运用,为丰富出血性疾病的中医药治疗手段及今后“肝主凝血”的研究提供一定的参考及思路。肝阴、肝气充足,肝之疏泄适度,情志平和等因素决定了“肝主凝血”功能的正常发挥。肝还能与心、脾、肺、肾四脏协作共同发挥凝血之功。酸味收敛药物,诸如白芍、山茱萸、海螵蛸、乌梅等,既能止已出之血,又能固未出之血;酸又入肝,同时还能收肝气、敛肝阴,使肝之疏泄适度,更好地发挥“肝主凝血”的功能。现代药理研究也表明此类药物本身或炮制后可以发挥凝血功效。临床治疗出血的患者,需注意审证求因,在止血的同时寻找出血之因,灵活运用收敛法,注意配合其他治法联合运用,以使“肝主凝血”之功正常发挥。 展开更多
关键词 出血性疾病 “肝主凝血” 收敛法 肝藏血
在线阅读 下载PDF
磁加载水处理技术磁粉定量分析的专利解决方案
11
作者 王光辉 花艳 周韦旭 《广东化工》 2025年第2期123-124,153,共3页
磁加载分离水处理技术自研究开发以来,已逐步被越来越多的水处理技术人员所接受,并应用于一些水处理工程,尤其是污水处理工程及河道应急处置工程。磁加载分离水处理技术中,磁粉具有粒径小、密度大、流动性差等特性,且该技术的一大优势... 磁加载分离水处理技术自研究开发以来,已逐步被越来越多的水处理技术人员所接受,并应用于一些水处理工程,尤其是污水处理工程及河道应急处置工程。磁加载分离水处理技术中,磁粉具有粒径小、密度大、流动性差等特性,且该技术的一大优势是对磁粉的回收与再利用,但该技术在应用过程中,对磁粉的回收损失量没有一个特定的测量方式,为技术的应用推广造成一定的困扰。文章介绍了磁粉含量测定装置,解决技术推广过程中的问题。 展开更多
关键词 磁加载分离水处理技术 磁粉 磁混凝高效沉淀技术 磁加载活性污泥法 定量分析
在线阅读 下载PDF
含印染废水的污水处理新工艺
12
作者 计建洪 耿学坚 +1 位作者 王丽聪 杭彩云 《印染助剂》 CAS 2024年第12期40-44,共5页
随着国家对水环境的不断重视,排水标准也在不断提高。太湖流域水网密集、水环境敏感性强,对出水排入太湖的污水处理厂提出了更高的要求。某污水处理厂采用“倒置A^(2)/O-MBR-磁混凝”组合工艺处理污水,出水能满足准Ⅳ类地表水排放标准... 随着国家对水环境的不断重视,排水标准也在不断提高。太湖流域水网密集、水环境敏感性强,对出水排入太湖的污水处理厂提出了更高的要求。某污水处理厂采用“倒置A^(2)/O-MBR-磁混凝”组合工艺处理污水,出水能满足准Ⅳ类地表水排放标准。对工艺特点、主要构筑物工艺参数进行了分析,通过对4月中下旬每一天的COD、TP、TN、NH_(3)-N监测数据进行分析,评价污水处理厂运行效果。运行结果表明,污水经过处理后,COD、TP、TN、NH_(3)-N平均去除率分别达到83%、90%、81%、98%,出水COD、TP、TN、NH_(3)-N各项指标的平均值分别为25.00、0.28、5.33、0.33 mg/L,5月平均处理水经营成本为0.84元/m^(3)。 展开更多
关键词 印染废水 倒置A^(2)/O 膜法 磁混凝沉淀 运行效果
在线阅读 下载PDF
新型聚镧混凝剂的制备及其在低温低浊水中的深度除磷性能 被引量:2
13
作者 吴兵党 潘莹露 +3 位作者 赵勤政 吴玮 许晓毅 黄天寅 《无机盐工业》 CAS CSCD 北大核心 2024年第2期127-135,共9页
针对铁铝盐混凝剂在低温低浊水中深度除磷性能欠佳的问题,基于镧和磷酸根具有特异性亲和力的特性,选用溶胶-凝胶法以不同镧源、有机配体和原料(酸、碱、醇、水)配比制备了一系列聚镧混凝剂(LXC),所得材料中镧的质量分数均为30%~33%,混... 针对铁铝盐混凝剂在低温低浊水中深度除磷性能欠佳的问题,基于镧和磷酸根具有特异性亲和力的特性,选用溶胶-凝胶法以不同镧源、有机配体和原料(酸、碱、醇、水)配比制备了一系列聚镧混凝剂(LXC),所得材料中镧的质量分数均为30%~33%,混凝絮体颗粒尺寸达1600μm,且在5 min内即可完成沉降过程。以LaCl_(3)和聚氯化铝(PAC)为对照样品,评估了LXC对学校河水[温度为4~6℃,磷质量浓度为(1.0±0.1)mg/L]、阳澄湖水[温度为4~6℃,磷质量浓度为(0.1±0.3)mg/L]和石湖水[温度为4~6℃,磷质量浓度为(0.8±0.2)mg/L]的深度除磷、除浊性能。结果表明,相同投加量下LXC对不同水样的除磷效果均优于LaCl_(3)和PAC,适宜条件下混凝出水中残余磷质量浓度低于0.02mg/L,均达到深度除磷效果。该研究为深度除磷、缓解水体富营养化提供新的解决思路。 展开更多
关键词 混凝 聚镧混凝剂 低温低浊 除磷 溶胶-凝胶法
在线阅读 下载PDF
植物叶蛋白提取工艺及蛋白肽制备技术研究进展 被引量:1
14
作者 魏佳 魏臻武 +2 位作者 张有鑫 颜梦雨 闵学阳 《草业科学》 CAS CSCD 北大核心 2024年第5期1241-1254,共14页
随着社会发展水平的提升,食物来源日益多元化,人们对优质蛋白质食物消费量不断增加,促使植物蛋白资源的开发和提取技术兴起。植物蛋白有动物蛋白无可比拟的优势,通过对叶蛋白深加工制备的蛋白肽,可以进一步提升植物蛋白的营养价值。因此... 随着社会发展水平的提升,食物来源日益多元化,人们对优质蛋白质食物消费量不断增加,促使植物蛋白资源的开发和提取技术兴起。植物蛋白有动物蛋白无可比拟的优势,通过对叶蛋白深加工制备的蛋白肽,可以进一步提升植物蛋白的营养价值。因此,植物叶蛋白的提取及精深加工备受人们关注,植物叶蛋白的提取方法更是多种多样,最佳提取工艺参数也有深究。本文在前人研究的基础上对不同的叶蛋白经典提取方法及精深加工生产蛋白肽的方法进行整理综述,从主要的叶蛋白提取环节着手,回顾了各提取方法的原理知识、操作注意事项并进行优缺点评价,以期为后续植物叶蛋白提取研究及蛋白肽的制备提供理论依据及指导意见。 展开更多
关键词 叶蛋白 工艺流程 蛋白凝聚 酶促 生物活性肽 营养价值 功能特性
在线阅读 下载PDF
凝固方式对天然橡胶脂肪酸含量及性能的影响
15
作者 柯栋斌 王兵兵 +4 位作者 林宏图 张福全 李高荣 廖建和 廖禄生 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2024年第9期108-117,共10页
脂肪酸是天然橡胶(NR)中重要的非胶组分之一。文中通过2种品系(热研73397和IAN873)、3种凝固方式(甲酸凝固、硫酸凝固、自然凝固)和2种标准胶工艺(全乳标准胶工艺(WF)、凝胶标准胶工艺(TSR))制备样品,研究了凝固方式对天然橡胶中脂肪酸... 脂肪酸是天然橡胶(NR)中重要的非胶组分之一。文中通过2种品系(热研73397和IAN873)、3种凝固方式(甲酸凝固、硫酸凝固、自然凝固)和2种标准胶工艺(全乳标准胶工艺(WF)、凝胶标准胶工艺(TSR))制备样品,研究了凝固方式对天然橡胶中脂肪酸含量的影响,探明脂肪酸含量变异性对NR力学性能的影响。结果表明,凝固方式会对非胶组分带来明显影响,其中硫酸凝固方式下样品脂肪酸含量保持效果最佳,而自然凝固方式下样品的下降幅度最为明显。在力学性能方面,在WF工艺下,非胶组分的适当降解有利于硫化反应的进行,这对应于自然凝固方式硫化胶具有最高的力学性能,而硫酸凝固的力学性能最低;在TSR工艺下,随熟化时间的延长,自然凝固硫化胶的力学性能降低。相同工艺下,IAN 873品系的重均分子量和凝胶含量均高于热研73397,而经过凝块熟化后甲酸和自然凝固样品的凝胶含量均不同程度的增加,但硫酸凝固的凝胶含量几乎没有变化,其TSR工艺样品的凝胶含量最低,这说明硫酸凝固阻碍了熟化过程中橡胶分子链发生结构化。 展开更多
关键词 天然橡胶 凝固方式 非胶组分 脂肪酸 力学性能
在线阅读 下载PDF
剪切增稠液微胶囊的制备与性能研究
16
作者 俞波 赵炳乾 +3 位作者 倪叶舟 钱坤 俞科静 陈坤林 《中国塑料》 CAS CSCD 北大核心 2024年第1期35-41,共7页
本研究以壳聚糖材料为壁材,剪切增稠液(STF)为芯材,通过单凝聚法制备了STF微胶囊(STF MCs)。通过单因素实验研究,确定了微胶囊的制备工艺参数:司盘80(Span 80)与吐温80(Tween 80)作为分散剂,复配比例为3∶1;乳化剂用量为11%,核壳比为2... 本研究以壳聚糖材料为壁材,剪切增稠液(STF)为芯材,通过单凝聚法制备了STF微胶囊(STF MCs)。通过单因素实验研究,确定了微胶囊的制备工艺参数:司盘80(Span 80)与吐温80(Tween 80)作为分散剂,复配比例为3∶1;乳化剂用量为11%,核壳比为2∶1,搅拌速度为600 r/min,反应温度为60℃;体系的油水比为1∶2。在此条件下制得的STF MCs呈较为规整的球形,粒径分布较为均匀,且主要集中在3μm左右。结果表明,碳纳米管的引入有效改善了STF的流变性能。掺杂CNTs的STF体系具有更小临界剪切速率,更快的黏度突变,并且峰值黏度增加近一倍;芯材和微胶囊乳液的红外光谱大部分都一致,表明壳聚糖成功吸附在芯材液滴表面,实现了对STF的包封。壁材对芯材STF起到了保护作用,提升了芯材STF的热稳定性。 展开更多
关键词 剪切增稠液 微胶囊 单凝聚法 单因素筛选 防护性能
在线阅读 下载PDF
NUMERICAL SIMULATION OF NANOPARTICLE COAGULATION IN A POISEUILLE FLOW VIA A MOMENT METHOD 被引量:7
17
作者 LIU Song LIN Jian-zhong 《Journal of Hydrodynamics》 SCIE EI CSCD 2008年第1期1-9,共9页
Numerical simulations of coagulating nano-scale aerosols in a two dimensional Poiseuille flow between fixed plates are performed. Evolution of the particle field is obtained by utilizing a moment method to approximate... Numerical simulations of coagulating nano-scale aerosols in a two dimensional Poiseuille flow between fixed plates are performed. Evolution of the particle field is obtained by utilizing a moment method to approximate the aerosol general dynamic equation. A moment method is used, which assumes a lognormal function for the particle size distribution and requires knowledge of the first three moments. A Damk?hler number is defined to represent the ratio of the convection time scale to the coagulation time scale. Simulations are performed based on three Reynolds numbers, 100, 500 and 1000, and on three initial particle volume fractions corresponding to Damk?hler numbers 0.1, 0.2 and 1.0. Spatio-temporal evolution of the first three moments along with the geometric mean volume and standard deviation are discussed. 展开更多
关键词 NANOPARTICLE coagulation moment method Poiseuille flow
原文传递
混凝沉淀法处理冶金含氟废水工艺研究 被引量:2
18
作者 朱祚峤 施梦圆 +2 位作者 毛瑞 郭海宁 苏宇傲 《无机盐工业》 CAS CSCD 北大核心 2024年第4期118-124,共7页
水中氟含量超标会对环境造成巨大影响,目前冶金行业普遍采用混凝沉淀法处理含氟废水。因此,针对混凝沉淀法除氟工艺中影响因素多、除氟效果缺少综合评估的问题,以某钢铁公司生产过程中产生的含氟废水为对象进行研究。首先通过正交实验考... 水中氟含量超标会对环境造成巨大影响,目前冶金行业普遍采用混凝沉淀法处理含氟废水。因此,针对混凝沉淀法除氟工艺中影响因素多、除氟效果缺少综合评估的问题,以某钢铁公司生产过程中产生的含氟废水为对象进行研究。首先通过正交实验考察pH、聚氯化铝(PAC)投加量、聚丙烯酰胺(PAM)投加量、PAC搅拌时间、PAM搅拌时间对含氟废水除氟效率影响的主次关系。研究结果表明,影响除氟效率的主次因素排序依次为pH、PAC搅拌时间、PAC投加量、PAM搅拌时间、PAM投加量。此外,对上述因素及温度等单因素变化对除氟效率的影响进行了研究。结果表明,最佳条件:pH为7、PAC投加量为70 mL、PAM投加量为2.5 mL、PAC搅拌时间为15 min、PAM搅拌时间为30 min、温度为30℃,在此最佳条件下除氟效率最高,可以达到99.3%。实际工程应用中,混凝沉淀法对氟离子总去除率在80%~90%,出水氟含量保持在7 mg/L左右,能够满足氟离子达标排放的要求。 展开更多
关键词 混凝沉淀法 含氟废水 聚氯化铝 聚丙烯酰胺
在线阅读 下载PDF
凝固浴对湿法制备聚氨酯微孔膜结构和性能的影响 被引量:2
19
作者 代国亮 郭羽晴 +1 位作者 王刚 孙洁 《纺织高校基础科学学报》 CAS 2024年第1期19-25,共7页
为了探讨厚度方向上呈非对称异质结构聚氨酯(PU)微孔膜的成型条件和性能表现,采用湿法成膜方法制备了PU微孔膜,通过改变凝固浴组分及配比,观察分析其对微孔膜微观结构的影响,探讨微孔结构对薄膜透气性、吸湿率、孔隙率、力学性能的影响... 为了探讨厚度方向上呈非对称异质结构聚氨酯(PU)微孔膜的成型条件和性能表现,采用湿法成膜方法制备了PU微孔膜,通过改变凝固浴组分及配比,观察分析其对微孔膜微观结构的影响,探讨微孔结构对薄膜透气性、吸湿率、孔隙率、力学性能的影响机制。结果表明:在水系凝固浴中,同时添加钠盐和N,N-二甲基甲酰胺(DMF)可以塑造微孔膜具备相对致密的“皮膜层”,有利于提高力学性能;仅添加DMF制得的薄膜内部虽无明显孔室,但凹凸起伏的褶皱结构能够形成贯通微细通道,透气性能突出;仅添加钠盐参与凝固的样品,膜体内呈海绵状蜂窝多孔结构,且膜皮层和底层具备尺寸相对较大的明显孔眼结构,因而吸湿率较高;乙醇凝固的样品,呈典型闭孔泡沫结构特征,透气、透湿和力学性能适中。 展开更多
关键词 聚氨酯 湿法成膜 微孔膜 凝固浴
在线阅读 下载PDF
响应面法优化焦化废水生化尾水混凝药剂投加量研究 被引量:2
20
作者 袁可 李瑞鹏 单文澜 《工业水处理》 CSCD 北大核心 2024年第1期157-161,共5页
采用聚合氯化铝(PAC)+聚丙烯酰胺(PAM)混凝处理焦化废水生化尾水,通过单因素实验考察了混凝剂PAC、PAM投加量对混凝处理效果的影响。基于单因素实验开展响应面混凝实验,构建PAC、PAM投加量为自变量,出水残留浊度和出水过余电导率组成的... 采用聚合氯化铝(PAC)+聚丙烯酰胺(PAM)混凝处理焦化废水生化尾水,通过单因素实验考察了混凝剂PAC、PAM投加量对混凝处理效果的影响。基于单因素实验开展响应面混凝实验,构建PAC、PAM投加量为自变量,出水残留浊度和出水过余电导率组成的加药控制系数为响应量的数学模型并对其参数进行了响应面优化。结果表明,混凝处理最佳药剂投加量PAC为2546.96 mg/L,PAM为10.90 mg/L,此条件下出水平均浊度残留率为4.24%、电导率过余率为2.77%、加药控制系数为7.01,与模型预测值相对误差<5%,进一步证明该响应面模型合理有效,对同时实现处理过程混凝充分反应和盐分有效控制具有指导作用,并可为相关自动化加药模型开发提供思路。 展开更多
关键词 焦化废水生化尾水 混凝处理 响应面法 聚合氯化铝 聚丙烯酰胺
在线阅读 下载PDF
上一页 1 2 27 下一页 到第
使用帮助 返回顶部