It has been proved by the World Health Organization （WHO） that electromagnetic waves would bring threats to public health in the tourism environment. However, most of the recent research about the relationship betwe...It has been proved by the World Health Organization （WHO） that electromagnetic waves would bring threats to public health in the tourism environment. However, most of the recent research about the relationship between building materials and electromagnetic waves was mainly focused on the electromagnetic products. It has also been claimed that the related research can rarely been found. Generally, ecotourism more tends to emphasize on a development of a new product and uni-environment study. However, these studies did not concern much on the application for conformity of healthcare-living materials, particularly to those block high-transparency materials. Hence, this research approaches to conform the application of architectural technique for producing tin-based powder with the add-on of Ni and Mg, in order to discuss the fully anti-electromagnetic wave property of healthcare material. With a low-cost advantage, the application field of architecture defines the ternary powder system, namely Sn-Al-Ni （SAN） and Sn-Al-Mn （SAM）. Additionally, the surface coating method can be implemented to review the influence of particle size, content ratio of Ni and Mn, stack effect, porosity and thickness to electromagnetic interference （EMI） mechanism.展开更多
In this study we propose an analytical method based on orthogonal wavelet transforms for detecting harmonic noise and Electromagnetic Interference (EMI) from power supply systems and equipment in coal mines. The metho...In this study we propose an analytical method based on orthogonal wavelet transforms for detecting harmonic noise and Electromagnetic Interference (EMI) from power supply systems and equipment in coal mines. The method will separate interference from signals through wavelet packet decomposition and then accomplish wavelet packet synthesis towards decomposition results after filtering, to remove harmonic noise and electromagnetic interference. Detailed simulation experiments are presented to study power harmonics and Electrical Fast Transient Burst (EFT/B) interference and to validate the effectiveness of our proposed method. The experimental results show that the proposed method, suitable for mutant and non-stationary signal detection, can accurately analyze harmonic interference and EMI in coal mines, as well as establish EMI source models and perform underground Electromagnetic Compatibility (EMC) prediction analyses.展开更多
To meet the demands for flexible electromagnetic interference(EMI)shielding materials,a type of conductive fabric is prepared by generating three-dimensional(3D)porous laser-induced graphene(LIG)in situ on the surface...To meet the demands for flexible electromagnetic interference(EMI)shielding materials,a type of conductive fabric is prepared by generating three-dimensional(3D)porous laser-induced graphene(LIG)in situ on the surface of the aramid fabric(AF)and then electroless plating copper.After LIG treatment,the porous AF demonstrates admirable conductivity due to the generation of graphene.The superior surface resistance of the conductive fabric can reach 1.57Ω/sq after copper deposition,and the average EMI shielding effectiveness(SE)can reach 34.3 dB in a frequency range of 8.2 to 12.4 GHz,with the EMW absorption accounting for about 80%.The proposed technology provides a new idea for preparation of flexible EMI shielding materials.展开更多
The sputtered Sn-Al and Sn-Cu thin films were used to investigate the effects of the crystallization mechanism and film thickness on the electromagnetic interference （EMI） characteristics. In addition, the annealed ...The sputtered Sn-Al and Sn-Cu thin films were used to investigate the effects of the crystallization mechanism and film thickness on the electromagnetic interference （EMI） characteristics. In addition, the annealed microstructure, electrical conductivities and EMI characteristics of the Sn-xAl films and the Sn-xCu films were compared. The results show that the electromagnetic interference （EMI） shielding of Sn-Al film was increased after annealing. For the Sn-Cu films with higher Cu mole concentration, the low frequency EMI shielding could not be improved. After annealing, the Sn-Cu thin film with lower Cu mole concentration possesses excellent EMI shielding at lower frequencies, but has an inverse tendency at higher frequencies.展开更多
To reduce the environmental pollution and meet the needs for wearable electronic devices, new requirements for electromagnetic interference(EMI) shielding materials include flexibility, biodegradability, and biocompat...To reduce the environmental pollution and meet the needs for wearable electronic devices, new requirements for electromagnetic interference(EMI) shielding materials include flexibility, biodegradability, and biocompatibility. Herein, we reported a polypyrrole-coated zein/epoxy(PPy/ZE) ultrafine fiber mat which was inherently biodegradable and skin-friendly. In addition, it could maintain its ultrafine fibrous structure after coating, which could provide the mat with mechanical compliance, high porosity, and a large specific area for high EMI shielding. With the assistance of the epoxide cross-linking, the breaking stresses of the PPy/ZE fiber mats could achieve 3.3 MPa and 1.4 MPa and the strains were 40.1% and 83.0% in dry and wet states, respectively, which met the needs of various wearable electronic devices. Along with the extension in the PPy treatment duration, more PPy was loaded on the fiber surfaces, which formed more integrated and conductive paths to generate increasing conductivities up to 401.76 S·m^(-1). Moreover, the EMI shielding performance was raised to 26.84 dB. The biobased mats provide a green and efficient choice for EMI shielding materials, which may be a promising strategy to address EMI problems in multiple fields.展开更多
针对复杂电子系统产生的传导EMI噪声,该文分别利用电偶极子模型、电路分析方法和散射参数方法提出了3种传导EMI噪声理论模型及其等效电路,包括因串扰引起的传导噪声模型,因接地不良引起的传导噪声模型,以及因PCB线缆阻抗失配引起的传导...针对复杂电子系统产生的传导EMI噪声,该文分别利用电偶极子模型、电路分析方法和散射参数方法提出了3种传导EMI噪声理论模型及其等效电路,包括因串扰引起的传导噪声模型,因接地不良引起的传导噪声模型,以及因PCB线缆阻抗失配引起的传导噪声模型。同时,还设计了一种串扰扼流圈以有效抑制因串扰引起的传导EMI噪声。实验结果表明,采用文中方法,某型商用车载导航和刷卡器能够通过GB 9254标准测试,噪声抑制效果分别可达44.8和29.28 dB V,从而验证了方法的有效性。展开更多
宽禁带WBG(wide band gap)半导体电力电子器件由于其开关频率高、开关速度快、寄生参数大等特点从噪声源头引发了越来越严峻的电磁干扰问题。然而,传统的噪声源研究主要集中在30 MHz传导频段以内,如何评估噪声源在30~300 MHz较高频率范...宽禁带WBG(wide band gap)半导体电力电子器件由于其开关频率高、开关速度快、寄生参数大等特点从噪声源头引发了越来越严峻的电磁干扰问题。然而,传统的噪声源研究主要集中在30 MHz传导频段以内,如何评估噪声源在30~300 MHz较高频率范围内的辐射频段产生的影响仍存在不确定性,因此提出1种改进的WBG器件电磁干扰分析模型,与传统的非对称梯形波电磁干扰模型相比,首次详细考虑了WBG器件的结电容和跨导体的非线性特性,评估了非线性参数对辐射频段噪声的影响,并进一步提出该模型在辐射频段噪声源抑制中的应用。仿真结果验证了所提计算方法的准确性,基于SiC器件的硬件测试结果与理论分析相吻合。展开更多
Instead of avoiding occurrence of chaos in motor drives, chaos is positively utilized in this paper. A new chaotic pulse width modulation （PWM） scheme is proposed and implemented for AC motors, which functions to si...Instead of avoiding occurrence of chaos in motor drives, chaos is positively utilized in this paper. A new chaotic pulse width modulation （PWM） scheme is proposed and implemented for AC motors, which functions to significantly suppress harmonic peaks and hence acoustic noise. The key is to employ the Chua＇s circuit for generating a desired chaotic sequence. By using a practical induction motor, computer simulation and experimental results verify that the chaotic PWM has advantages of harmonic peak suppression and simple hardware implementation over the conventional PWM and random PWM.展开更多
针对三电平中点钳位型NPC(neutral point clamped)变换器开关频率提高导致变换器电流纹波与电磁干扰噪声增大的问题,提出1种基于电流纹波预测的变开关频率调制策略,以降低三电平NPC变换器电流纹波、谐波噪声及电磁干扰噪声。根据电流纹...针对三电平中点钳位型NPC(neutral point clamped)变换器开关频率提高导致变换器电流纹波与电磁干扰噪声增大的问题,提出1种基于电流纹波预测的变开关频率调制策略,以降低三电平NPC变换器电流纹波、谐波噪声及电磁干扰噪声。根据电流纹波的要求计算出开关周期与采样周期并合成最新的开关周期,形成反馈,从而实现变频调制。使随机周期分布在期望周期的周围,从而使变换器的谐波噪声和电磁噪声更加均匀地分布在较宽的频段上,以达到减少变换器电磁噪声的目的,并改善输出电感上的电流纹波。相关仿真及实验结果表明,相较于传统的调制策略,所提调制策略共模噪声降低了约20 dB/μV,差模噪声降低了约10 dB/μV,其输出电感电流纹波幅值也有相应的减少。展开更多
基金grateful to Department of TravelIndustry Management,Far East University,NSC101-2218-E-269-002 for the financial support
文摘It has been proved by the World Health Organization （WHO） that electromagnetic waves would bring threats to public health in the tourism environment. However, most of the recent research about the relationship between building materials and electromagnetic waves was mainly focused on the electromagnetic products. It has also been claimed that the related research can rarely been found. Generally, ecotourism more tends to emphasize on a development of a new product and uni-environment study. However, these studies did not concern much on the application for conformity of healthcare-living materials, particularly to those block high-transparency materials. Hence, this research approaches to conform the application of architectural technique for producing tin-based powder with the add-on of Ni and Mg, in order to discuss the fully anti-electromagnetic wave property of healthcare material. With a low-cost advantage, the application field of architecture defines the ternary powder system, namely Sn-Al-Ni （SAN） and Sn-Al-Mn （SAM）. Additionally, the surface coating method can be implemented to review the influence of particle size, content ratio of Ni and Mn, stack effect, porosity and thickness to electromagnetic interference （EMI） mechanism.
基金the financial support for our work by the Doctoral Foundation of Ministry of Education of China (No.200802900008)
文摘In this study we propose an analytical method based on orthogonal wavelet transforms for detecting harmonic noise and Electromagnetic Interference (EMI) from power supply systems and equipment in coal mines. The method will separate interference from signals through wavelet packet decomposition and then accomplish wavelet packet synthesis towards decomposition results after filtering, to remove harmonic noise and electromagnetic interference. Detailed simulation experiments are presented to study power harmonics and Electrical Fast Transient Burst (EFT/B) interference and to validate the effectiveness of our proposed method. The experimental results show that the proposed method, suitable for mutant and non-stationary signal detection, can accurately analyze harmonic interference and EMI in coal mines, as well as establish EMI source models and perform underground Electromagnetic Compatibility (EMC) prediction analyses.
基金Shanghai Sailing Program,Shanghai,China(No.22YF1400500)Fundamental Research Funds for the Central Universities,China(Nos.2232022D-11 and 22D128102/007)Shanghai Natural Science Foundation of Shanghai Municipal Science and Technology Commission,Shanghai,China(No.20ZR1401600)。
文摘To meet the demands for flexible electromagnetic interference(EMI)shielding materials,a type of conductive fabric is prepared by generating three-dimensional(3D)porous laser-induced graphene(LIG)in situ on the surface of the aramid fabric(AF)and then electroless plating copper.After LIG treatment,the porous AF demonstrates admirable conductivity due to the generation of graphene.The superior surface resistance of the conductive fabric can reach 1.57Ω/sq after copper deposition,and the average EMI shielding effectiveness(SE)can reach 34.3 dB in a frequency range of 8.2 to 12.4 GHz,with the EMW absorption accounting for about 80%.The proposed technology provides a new idea for preparation of flexible EMI shielding materials.
基金the Center for Micro/Nano Science and Technology,National Cheng Kung University(NCKU Project of Promoting Academic Excellence&Developing World Class Research Center:D97-2700)NSC98-2221-E-006-068NSC98-2622-E-006-024-CC3 for the financial support
文摘The sputtered Sn-Al and Sn-Cu thin films were used to investigate the effects of the crystallization mechanism and film thickness on the electromagnetic interference （EMI） characteristics. In addition, the annealed microstructure, electrical conductivities and EMI characteristics of the Sn-xAl films and the Sn-xCu films were compared. The results show that the electromagnetic interference （EMI） shielding of Sn-Al film was increased after annealing. For the Sn-Cu films with higher Cu mole concentration, the low frequency EMI shielding could not be improved. After annealing, the Sn-Cu thin film with lower Cu mole concentration possesses excellent EMI shielding at lower frequencies, but has an inverse tendency at higher frequencies.
基金Fundamental Research Funds for the Central Universities,China(No. 2232022D-13)Fundamental Research Funds of Shanghai Collaborative Innovation Center of High Performance Fibers and Composites (Province-M inistry Joint),China(No. X12812101/015)。
文摘To reduce the environmental pollution and meet the needs for wearable electronic devices, new requirements for electromagnetic interference(EMI) shielding materials include flexibility, biodegradability, and biocompatibility. Herein, we reported a polypyrrole-coated zein/epoxy(PPy/ZE) ultrafine fiber mat which was inherently biodegradable and skin-friendly. In addition, it could maintain its ultrafine fibrous structure after coating, which could provide the mat with mechanical compliance, high porosity, and a large specific area for high EMI shielding. With the assistance of the epoxide cross-linking, the breaking stresses of the PPy/ZE fiber mats could achieve 3.3 MPa and 1.4 MPa and the strains were 40.1% and 83.0% in dry and wet states, respectively, which met the needs of various wearable electronic devices. Along with the extension in the PPy treatment duration, more PPy was loaded on the fiber surfaces, which formed more integrated and conductive paths to generate increasing conductivities up to 401.76 S·m^(-1). Moreover, the EMI shielding performance was raised to 26.84 dB. The biobased mats provide a green and efficient choice for EMI shielding materials, which may be a promising strategy to address EMI problems in multiple fields.
文摘针对复杂电子系统产生的传导EMI噪声,该文分别利用电偶极子模型、电路分析方法和散射参数方法提出了3种传导EMI噪声理论模型及其等效电路,包括因串扰引起的传导噪声模型,因接地不良引起的传导噪声模型,以及因PCB线缆阻抗失配引起的传导噪声模型。同时,还设计了一种串扰扼流圈以有效抑制因串扰引起的传导EMI噪声。实验结果表明,采用文中方法,某型商用车载导航和刷卡器能够通过GB 9254标准测试,噪声抑制效果分别可达44.8和29.28 dB V,从而验证了方法的有效性。
文摘宽禁带WBG(wide band gap)半导体电力电子器件由于其开关频率高、开关速度快、寄生参数大等特点从噪声源头引发了越来越严峻的电磁干扰问题。然而,传统的噪声源研究主要集中在30 MHz传导频段以内,如何评估噪声源在30~300 MHz较高频率范围内的辐射频段产生的影响仍存在不确定性,因此提出1种改进的WBG器件电磁干扰分析模型,与传统的非对称梯形波电磁干扰模型相比,首次详细考虑了WBG器件的结电容和跨导体的非线性特性,评估了非线性参数对辐射频段噪声的影响,并进一步提出该模型在辐射频段噪声源抑制中的应用。仿真结果验证了所提计算方法的准确性,基于SiC器件的硬件测试结果与理论分析相吻合。
基金Project supported by the Shanghai Leading Academic Discipline Project (Grant No.T0103)
文摘Instead of avoiding occurrence of chaos in motor drives, chaos is positively utilized in this paper. A new chaotic pulse width modulation （PWM） scheme is proposed and implemented for AC motors, which functions to significantly suppress harmonic peaks and hence acoustic noise. The key is to employ the Chua＇s circuit for generating a desired chaotic sequence. By using a practical induction motor, computer simulation and experimental results verify that the chaotic PWM has advantages of harmonic peak suppression and simple hardware implementation over the conventional PWM and random PWM.
文摘针对三电平中点钳位型NPC(neutral point clamped)变换器开关频率提高导致变换器电流纹波与电磁干扰噪声增大的问题,提出1种基于电流纹波预测的变开关频率调制策略,以降低三电平NPC变换器电流纹波、谐波噪声及电磁干扰噪声。根据电流纹波的要求计算出开关周期与采样周期并合成最新的开关周期,形成反馈,从而实现变频调制。使随机周期分布在期望周期的周围,从而使变换器的谐波噪声和电磁噪声更加均匀地分布在较宽的频段上,以达到减少变换器电磁噪声的目的,并改善输出电感上的电流纹波。相关仿真及实验结果表明,相较于传统的调制策略,所提调制策略共模噪声降低了约20 dB/μV,差模噪声降低了约10 dB/μV,其输出电感电流纹波幅值也有相应的减少。
