Mixed-variable problems are inevitable in engineering. However, few researches pay attention to discrete variables. This paper proposed a mixed-variable experimental design method (ODCD): first, the design variables w...Mixed-variable problems are inevitable in engineering. However, few researches pay attention to discrete variables. This paper proposed a mixed-variable experimental design method (ODCD): first, the design variables were divided into discrete variables and continuous variables;then, the DVD method was employed for handling discrete variables, the LHD method was applied for continuous variables, and finally, a Columnwise-Pairwise Algorithm was used for the overall optimization of the design matrix. Experimental results demonstrated that the ODCD method outperforms in terms of the sample space coverage performance.展开更多
In order to analyze the influence of configuration parameters on dynamic characteristics of machine tools in the working space, the configuration parameters have been suggested based on the orthogonal experiment metho...In order to analyze the influence of configuration parameters on dynamic characteristics of machine tools in the working space, the configuration parameters have been suggested based on the orthogonal experiment method. Dynamic analysis of a milling machine, which is newly designed for producing turbine blades, has been conducted by utilizing the modal synthesis method. The finite element model is verified and updated by experimental modal analysis （EMA） of the machine tool. The result gained by modal synthesis method is compared with whole-model finite element method （FEM） result as well. According to the orthogonal experiment method, four configuration parameters of machine tool are considered as four factors for dynamic characteristics. The influence of configuration parameters on the first three natural frequencies is obtained by range analysis. It is pointed out that configuration parameter is the most important factor affecting the fundamental frequency of machine tools, and configuration parameter has less effect on lower-order modes of the system than others. The combination of configuration parameters which makes the fundamental frequency reach the maximum value is provided. Through demonstration, the conclusion can be drawn that the influence of configuration parameters on the natural frequencies of machine tools can be analyzed explicitly by the orthogonal experiment method, which offers a new method for estimating the dynamic characteristics of machine tools.展开更多
This paper studies the excavation collapse at the Xianghu subway station on Hangzhou metro line 1.The objective is to present an overview of this case study and discuss the cause of the failure.Through field investiga...This paper studies the excavation collapse at the Xianghu subway station on Hangzhou metro line 1.The objective is to present an overview of this case study and discuss the cause of the failure.Through field investigation and preliminary analysis,the reasons for the excavation collapse were the misuse of the soil parameters,over excavation,incorrect installation of steel struts,invalid monitoring data,and inadequate ground improvement.Finally,a small strain constitutive model was used for further analysis.In order to estimate damage efficiently,the orthogonal array(OA) was introduced for screening the key factor in the numerical experiments.Six estimated indexes including deformations and internal forces of the excavation were taken,and the effectiveness of four factors which may cause the collapse was evaluated.Through numerical experiments and interaction analysis,it is found that the deformation and internal force can be well controlled by jet grouting of the subsoil under the final cutting surface,but increasing the improvement ratio of the jet grouting cannot help optimize the excavation behavior efficiently,and without jet grouting and the fourth level struts,the deformation and internal force of the excavation in this case will far surpass the allowable value.展开更多
Potato insurance plays an important role in transferring agricultural risks to promote the potato staple strategy. Understanding farmers’ real preferences for potato insurance attributes is important to improve the p...Potato insurance plays an important role in transferring agricultural risks to promote the potato staple strategy. Understanding farmers’ real preferences for potato insurance attributes is important to improve the potato insurance. In this study, a choice experiment was designed with attributes such as peril, minimum compensation ratio for production loss, types of crops covered by insurance, annual premium per mu after subsidy, and complexity of claims procedures. We constructed a mixed logit model based on a questionnaire survey of 362 potato farmers’ choices of insurance attributes from 24 villages in Dingxi City of Gansu Province using random sampling. The results show that:(1) farmers prefer agricultural insurance with widely perils including output price drop and input cost risk;(2) farmers who have suffered plant disease and insect and pest damage are willing to pay a high premium for the insurance with a high compensation ratio and several types of crops covered;full-time farmers and large-scale farmers preferred insurance products with low complexity of claims procedures. Therefore, new potato insurance design could be considered specifically for different farmer groups such as those who had previous disaster experiences, and large-or small-scale farm operations.展开更多
A hybrid numerical-experimental approach to identify elastic modulus of a textile composite panel using vibration test data is proposed and investi- gated. Homogenization method is adopted to predict the initial value...A hybrid numerical-experimental approach to identify elastic modulus of a textile composite panel using vibration test data is proposed and investi- gated. Homogenization method is adopted to predict the initial values of elastic parameters of the composite, and parameter identification is transformed to an optimization problem in which the objective function is the minimization of the discrepancies between the experimental and numerical modal data. Case study is conducted employing a woven fabric reinforced composite panel. Three parameters （Ell, E22, G12） with higher sensitivities are selected to be identified. It is shown that the elastic parameters can be accurately identified from experimental modal data.展开更多
Maize regional experiment is a an intermediate link for overall assessment and comprehensive evaluation on yielding ability, stable yield, stress, adaptability, and quality traits of new maize varieties in different e...Maize regional experiment is a an intermediate link for overall assessment and comprehensive evaluation on yielding ability, stable yield, stress, adaptability, and quality traits of new maize varieties in different ecological conditions. It is an essential process for determining whether the new maize varieties can pass the ex- amination and approval for extension. Besides, regional experiment is an important link connecting agricultural scientific researches and agricultural production. In addi- tion, it is a scientific basis for extension and application of new maize varieties in a region. Therefore, the maize regional experiment is of the utmost importance.展开更多
Objective： The aim of this project was to train highly professional and specialized nursing students from medical colleges to adapt to bedside clinical care by exploring and discussing various methods of injection an...Objective： The aim of this project was to train highly professional and specialized nursing students from medical colleges to adapt to bedside clinical care by exploring and discussing various methods of injection and IV infusion in animal experimentation to hone the core professional nursing competencies. Methods： Two classes from the 2012 senior graduating nursing class were randomly selected by a computer to conduct the diversified practical teaching methods based on animal experimentation. A hospital environment was simulated by requiring students to perform different types of injections and practical IV infusion techniques. A comprehensive evaluation of the core professional competencies, as well as other integrated competencies, was conducted to determine the effectiveness of the teaching methods. Results： Two-sampled, pairwise u-tests were performed between the scores of the experimental （nursing class 2） and control （nursing class 1） groups. These findings showed that the overall test scores were significantly higher in the experimental group compared to the control group and that the average P-values for the competencies in various categories were 〈0.01, which indicated statistically significant results. Conclusions： Based on the data from this project, diversified teaching methods for basic nursing training founded on animal experimentation can help nursing students perfect their core professional competencies and improve their overall professional standing. The introduction of animal experimentation requires further verification, and an increased acknowledgement of its benefits through the widespread dissemination of this information.展开更多
To analyze the spring disturbance torque caused by motionai cable harness in a stabilized platform, the Kirchhoff theory based cable harness model has been previously developed to dynamically simulate the motional cab...To analyze the spring disturbance torque caused by motionai cable harness in a stabilized platform, the Kirchhoff theory based cable harness model has been previously developed to dynamically simulate the motional cable harness. In this paper, this model was validated by comparing the simulation results with the experiment results （ both the spring force and the deformed profile of the motional cable harness）. In the experiment, a special optical measuring instrument based on binocular vision was developed and the motion and deformation of cable harness were measured. A simpli- fied stabilized platform system was constructed, and the absolute value of spring disturbance force during the motion of this simplified frame was obtained by using a force gauge （0. 02 N precision）. The physical parameters of experimental specimen were also measured. The experimental and simulated results showed good agreement. These results should be useful for better motional cable harness layout design and reliable evaluation of the spring disturbance torque.展开更多
Though novel reading is a common experience to everybody,little has been researched to help average readers to understand a novel.In practice,there are two ways for them to understand a novel:one is to use literary cr...Though novel reading is a common experience to everybody,little has been researched to help average readers to understand a novel.In practice,there are two ways for them to understand a novel:one is to use literary criticism theories and the other is to refer to professional critics'criticism directly.However,the trouble is that the two methods are either time-consuming or far from convincing.In this paper,an experimental reading method is discussed to help average readers enhance reading experience.It aims at reaching the goal of reading without criticism,which,through making clear the aim of reading,putting main focus on the story only,will help readers to have a better understanding of reading.展开更多
This work is an experimental approach based on the method of experimental plans to determine a specific formulation of a resin concrete. In this study, an unsaturated polyester resin （thermosetting resin） was used w...This work is an experimental approach based on the method of experimental plans to determine a specific formulation of a resin concrete. In this study, an unsaturated polyester resin （thermosetting resin） was used with two types of mineral fillers （dune sand and crushed sand）, and with the addition of a marble powder to ensure the continuity of the particle size mixing granular. The lack of the methods for developing this kind of composite materials, had led us to perform an initial experimental approach to define the experimental field, that is to say determine the mass proportions of the various compounds of mixture of our study. In the second approach, we have established and implemented fully experimental plans with three factors namely： factor （1）： sand, factor （2）： resin, factor （3）： marble powder. Test results being the density of polymer concrete and the mechanical resistances. Finally, multi-parameters regression allowed us to determine predictive mathematical models for the different responses of the study. Tests results showed that at three days we got a tensile strength of about 16 MPa with a resin concrete density of 1.9 g/cm3. This shows the advantages of this material.展开更多
The impact problem of a flexible multibody system is a non-smooth, high-transient, and strong-nonlinear dynamic process with variable boundary. How to model the contact/impact process accurately and efficiently is one...The impact problem of a flexible multibody system is a non-smooth, high-transient, and strong-nonlinear dynamic process with variable boundary. How to model the contact/impact process accurately and efficiently is one of the main difficulties in many engineering applications. The numerical approaches being used widely in impact analysis are mainly from two fields： multibody system dynamics （MBS） and computational solid mechanics （CSM）. Approaches based on MBS provide a more efficient yet less accurate analysis of the contact/impact problems, while approaches based on CSM are well suited for particularly high accuracy needs, yet require very high computational effort. To bridge the gap between accuracy and efficiency in the dynamic simulation of a flexible multibody system with contacts/impacts, a partition method is presented considering that the contact body is divided into two parts, an impact region and a non-impact region. The impact region is modeled using the finite element method to guarantee the local accuracy, while the non-impact region is modeled using the modal reduction approach to raise the global efficiency. A three-dimensional rod-plate impact experiment is designed and performed to validate the numerical results. The principle for how to partition the contact bodies is proposed： the maximum radius of the impact region can be estimated by an analytical method, and the modal truncation orders of the non-impact region can be estimated by the highest frequency of the signal measured. The simulation results using the presented method are in good agreement with the experimental results. It shows that this method is an effec-rive formulation considering both accuracy and efficiency. Moreover, a more complicated multibody impact problem of a crank slider mechanism is investigated to strengthen this conclusion.展开更多
DOE （design of experiments） is a systematic, rigorous approach to engineering problem-solving that applies principles and techniques at the data collection stage so as to ensure the generation of valid, defensible, ...DOE （design of experiments） is a systematic, rigorous approach to engineering problem-solving that applies principles and techniques at the data collection stage so as to ensure the generation of valid, defensible, and supportable engineering conclusions. This paper presents a comparison of three different experimental designs （full experimental design, fractional design and Taguchi design） aimed at studying the effects of cutting parameters variations on surface finish. The results revealed that the effects obtained by analyzing both fractional and Taguchi designs were comparable to the main effects and two-level interactions obtained by the full factorial design. Thus, we conclude that full factorial design appear to be reliable and more economical since they permit to reduce by a factor the amount of time and effort required to conduct the experimental design without losing valuable information. Thus, we conclude that full factorial design appear to be reliable and more economical and without losing valuable information.展开更多
Method validation presents a detailed investigation of analytical method and provision of the evidence that the method, when correctly applied, produces results that fit to the purpose. In order to achieve the method ...Method validation presents a detailed investigation of analytical method and provision of the evidence that the method, when correctly applied, produces results that fit to the purpose. In order to achieve the method validation scope efficiently, experimental design presents a very useful tool. The greatest benefits of such approach could be seen in robustness testing through the provision of very useful data about the control of the chromatograp6hic system during the routine application. In this paper, robustness testing of the LC method proposed for the determination of raloxifene hydrochloride and its four impurities was done employing Plackett-Burman design. Applying this design, the effect of five real factors （acetonitrile content, sodium dodecyl sulfate content, column temperature, pH of the mobile phase and flow rate） on the corresponding resolution factors was investigated through twelve experiments. Furthermore, the insignificance intervals for significant factors were calculated and the parameters for system suitability tests were defined. Eventually, the other validation parameters were tested and the effectiveness of the proposed analytical method with a high degree of accuracy was confirmed.展开更多
In this paper, on the basis of experimental data of two kinds of chemical explosions, the piston-pushing model of spherical blast-waves and the second-order Godunov-type scheme of finite difference methods with high i...In this paper, on the basis of experimental data of two kinds of chemical explosions, the piston-pushing model of spherical blast-waves and the second-order Godunov-type scheme of finite difference methods with high identification to discontinuity are used to the numerical reconstruction of part of an actual hemispherical blast-wave flow field by properly adjusting the moving bounary conditions of a piston. This method is simple and reliable. It is suitable to the evaluation of effects of the blast-wave flow field away from the explosion center.展开更多
An experimental-numerical method for measuring dynamic crack propagatingvelocities under stress wave loading is established in this paper. The experiments of thethree-point bend specimen are done on the improved Hopki...An experimental-numerical method for measuring dynamic crack propagatingvelocities under stress wave loading is established in this paper. The experiments of thethree-point bend specimen are done on the improved Hopkinson bar. Deflection of loading point,dynamic load and instantaneous crack length are measured, then crack propagating velocities arecalculated. Experiments on 40Cr steel show that the results given by this method have a goodagreement with that obtained by the resistance fracture gage method. Therefore this method isfeasible for measuring crack propagating velocities under high loading rate and will have wideapplication.展开更多
Despite a multitude of theoretical discussions on China's mixed ownership reform, very few studies have addressed realistic questions concerning the implementation of the reform. The Resolutions of the Third Plenu...Despite a multitude of theoretical discussions on China's mixed ownership reform, very few studies have addressed realistic questions concerning the implementation of the reform. The Resolutions of the Third Plenum of the 18 th CPC Central Committee and other reform strategies have outlined the reform of sectors with natural monopoly, including urban public utility sectors. The question is how mixed ownership reform should be carried out in sectors of natural monopoly, or which public utilities sectors should enjoy priority of mixed ownership reform. To answer this question, this paper employs data of large public utility enterprises in China from 1998 to 2008, and estimates the natural monopoly attribute at the industry level and corporate total factor productivity(TFP) using cost function analysis method excluding the impact of product price factor. Based on the difference-indifferences-in-differences(DDD) method of natural experiment, an empirical test is carried out for the relationship among natural monopoly, mixed ownership reform and corporate productivity. Our results suggest that:(1) Statistically, mixed ownership reform cannot significantly increase corporate TFP in sectors with natural monopoly;(2) mixed ownership reform should not be carried out indiscriminately on a nationwide basis and for all public utilities sectors. Such an attempt of reform without distinguishing natural monopoly and the level of competitiveness is fraught with policy uncertainties;(3) relative to sectors with natural monopoly, corporate productivity in competitive sectors after mixed ownership reform will improve more significantly and enjoy greater "policy dividends" of institutional reform. Therefore, mixed ownership reform should be carried out first in competitive sectors.展开更多
In recent years,rockburst have gained significant attention as a crucial topic in rock engineering.Strain andfault-slip rockburst are two common types that occur frequently and cause substantial damage.The objective o...In recent years,rockburst have gained significant attention as a crucial topic in rock engineering.Strain andfault-slip rockburst are two common types that occur frequently and cause substantial damage.The objective of thisreview is to conduct a comprehensive study on the experiments and failure mechanisms of strain and fault-slip rockburst.Firstly,the article analyzes the evolving trends in experimental research on rockburst in the past decade,highlightingmechanical properties and failure modes as the primary research focuses in understanding rockburst mechanisms.Subsequently,it provides an overview of the experimental techniques and methods employed for studying both types ofrockburst.Then,with a focus on the mechanical properties and failure modes,the article conducts an extensive analysisof the failure mechanisms associated with strain and fault-slip rockburst.By analyzing experimental data and observingthe failure characteristics of samples,it discusses the variations and common features exhibited by these two types ofrockburst under various test conditions.This analysis is of paramount importance in revealing the causes of rockburstformation and development,as well as in predicting rockburst trends and assessing associated risks.Lastly,thelimitations of current rockburst experiments and future research directions are discussed,followed by a comprehensivesummary of the entire article.展开更多
To overcome the shortcomings of the traditional passive ranging technology based on image, such as poor ranging accuracy, low reliability and complex system, a new visual passive ranging method based on re-entrant coa...To overcome the shortcomings of the traditional passive ranging technology based on image, such as poor ranging accuracy, low reliability and complex system, a new visual passive ranging method based on re-entrant coaxial optical path is presented. The target image is obtained using double cameras with coaxial optical path. Since there is imaging optical path difference between the cameras, the images are different. In comparison of the image differences, the target range could be reversed. The principle of the ranging method and the ranging model are described. The relationship among parameters in the ranging process is analyzed quantitatively. Meanwhile,the system composition and technical realization scheme are also presented. Also, the principle of the method is verified by the equivalent experiment. The experimental results show that the design scheme is correct and feasible with good robustness. Generally, the ranging error is less than 10% with good convergence. The optical path is designed in a re-entrant mode to reduce the volume and weight of the system. Through the coaxial design,the visual passive range of the targets with any posture can be obtained in real time. The system can be widely used in electro-optical countermeasure and concealed photoelectric detection.展开更多
In this paper the main sources causing the scatter of the experimental results of the material parameters are discussed. They can be divided into two parts: one is the experimental errors which are introduced because ...In this paper the main sources causing the scatter of the experimental results of the material parameters are discussed. They can be divided into two parts: one is the experimental errors which are introduced because of the inaccuracy of experimental equipment, the experimental techniques, etc., and the form of the scatter caused by this source is called external distribution. The other is due to the irregularity and inhomogeneity of the material structure and the randomness of deformation process. The scatter caused by this source is inherent and then this form of the scatter is called internal distribution. Obviously the experimental distribution of material parameters combines these two distributions in some way; therefore, it is a sum distribution of the external distribution and the internal distribution. In view of this , a general method used to analyse the influence of the experimental errors on the experimental results is presented, and three criteria used to value this influence are defined. An example in which the fracture toughness KIC is analysed shows that this method is reasonable, convenient and effective.展开更多
Different Ziegler-Natta catalysts were employed to polymerize ethylene. To investigate the influences of reaction parameters, namely Al/Ti molar ratio, hydrogen and processing parameters, i.e. ethylene pressure and te...Different Ziegler-Natta catalysts were employed to polymerize ethylene. To investigate the influences of reaction parameters, namely Al/Ti molar ratio, hydrogen and processing parameters, i.e. ethylene pressure and temperature, a Taguchi experimental design was worked out. An L27 orthogonal array was chosen to take the above-mentioned parameters and relevant interactions into account. Response surface method was the tool used to analyze the experimental design results. Al/Ti, ethylene pressure and temperature were selected as experimental design factors, and catalyst activity and polymerization yield were the response parameters. Increasing pressure, due to an increment in monomer accessibility, and rising Al/Ti, because of higher reduction in the catalysts, cause an increase in both polymerization yield and catalyst activity. Nonetheless, a higher temperature, thanks to reducing ethylene solubility in the slurry medium and partially catalyst destruction, lead to a reduction in both response parameters. A synergistic effect was also observed between temperature and pressure. All catalyst activities will reduce in the presence of hydrogen. Molecular weight also shows a decline in the presence of hydrogen as a transfer agent. However, the polydispersity index remains approximately intact. Using SEM, various morphologies, owing to different catalyst morphologies, were seen for the polyethylene.展开更多
文摘Mixed-variable problems are inevitable in engineering. However, few researches pay attention to discrete variables. This paper proposed a mixed-variable experimental design method (ODCD): first, the design variables were divided into discrete variables and continuous variables;then, the DVD method was employed for handling discrete variables, the LHD method was applied for continuous variables, and finally, a Columnwise-Pairwise Algorithm was used for the overall optimization of the design matrix. Experimental results demonstrated that the ODCD method outperforms in terms of the sample space coverage performance.
基金Important National Science & Technology Specific Projects (2009ZX04001-073)National Natural Science Foundation of China (51105025)
文摘In order to analyze the influence of configuration parameters on dynamic characteristics of machine tools in the working space, the configuration parameters have been suggested based on the orthogonal experiment method. Dynamic analysis of a milling machine, which is newly designed for producing turbine blades, has been conducted by utilizing the modal synthesis method. The finite element model is verified and updated by experimental modal analysis （EMA） of the machine tool. The result gained by modal synthesis method is compared with whole-model finite element method （FEM） result as well. According to the orthogonal experiment method, four configuration parameters of machine tool are considered as four factors for dynamic characteristics. The influence of configuration parameters on the first three natural frequencies is obtained by range analysis. It is pointed out that configuration parameter is the most important factor affecting the fundamental frequency of machine tools, and configuration parameter has less effect on lower-order modes of the system than others. The combination of configuration parameters which makes the fundamental frequency reach the maximum value is provided. Through demonstration, the conclusion can be drawn that the influence of configuration parameters on the natural frequencies of machine tools can be analyzed explicitly by the orthogonal experiment method, which offers a new method for estimating the dynamic characteristics of machine tools.
基金Project (No. 51078377) supported by the National Natural Science Foundation of China
文摘This paper studies the excavation collapse at the Xianghu subway station on Hangzhou metro line 1.The objective is to present an overview of this case study and discuss the cause of the failure.Through field investigation and preliminary analysis,the reasons for the excavation collapse were the misuse of the soil parameters,over excavation,incorrect installation of steel struts,invalid monitoring data,and inadequate ground improvement.Finally,a small strain constitutive model was used for further analysis.In order to estimate damage efficiently,the orthogonal array(OA) was introduced for screening the key factor in the numerical experiments.Six estimated indexes including deformations and internal forces of the excavation were taken,and the effectiveness of four factors which may cause the collapse was evaluated.Through numerical experiments and interaction analysis,it is found that the deformation and internal force can be well controlled by jet grouting of the subsoil under the final cutting surface,but increasing the improvement ratio of the jet grouting cannot help optimize the excavation behavior efficiently,and without jet grouting and the fourth level struts,the deformation and internal force of the excavation in this case will far surpass the allowable value.
基金supported by the Special Fund for Agro-scientific Research in the Public Interest of China(201503001)。
文摘Potato insurance plays an important role in transferring agricultural risks to promote the potato staple strategy. Understanding farmers’ real preferences for potato insurance attributes is important to improve the potato insurance. In this study, a choice experiment was designed with attributes such as peril, minimum compensation ratio for production loss, types of crops covered by insurance, annual premium per mu after subsidy, and complexity of claims procedures. We constructed a mixed logit model based on a questionnaire survey of 362 potato farmers’ choices of insurance attributes from 24 villages in Dingxi City of Gansu Province using random sampling. The results show that:(1) farmers prefer agricultural insurance with widely perils including output price drop and input cost risk;(2) farmers who have suffered plant disease and insect and pest damage are willing to pay a high premium for the insurance with a high compensation ratio and several types of crops covered;full-time farmers and large-scale farmers preferred insurance products with low complexity of claims procedures. Therefore, new potato insurance design could be considered specifically for different farmer groups such as those who had previous disaster experiences, and large-or small-scale farm operations.
基金supported by the Program for New Century Excellent Talents in University(NCET11-0086)the National Natural Science Foundation of China(10902024)+1 种基金the Doctoral Program of Higher Education of China(20130092120039)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD-1105007001)
文摘A hybrid numerical-experimental approach to identify elastic modulus of a textile composite panel using vibration test data is proposed and investi- gated. Homogenization method is adopted to predict the initial values of elastic parameters of the composite, and parameter identification is transformed to an optimization problem in which the objective function is the minimization of the discrepancies between the experimental and numerical modal data. Case study is conducted employing a woven fabric reinforced composite panel. Three parameters （Ell, E22, G12） with higher sensitivities are selected to be identified. It is shown that the elastic parameters can be accurately identified from experimental modal data.
文摘Maize regional experiment is a an intermediate link for overall assessment and comprehensive evaluation on yielding ability, stable yield, stress, adaptability, and quality traits of new maize varieties in different ecological conditions. It is an essential process for determining whether the new maize varieties can pass the ex- amination and approval for extension. Besides, regional experiment is an important link connecting agricultural scientific researches and agricultural production. In addi- tion, it is a scientific basis for extension and application of new maize varieties in a region. Therefore, the maize regional experiment is of the utmost importance.
基金supported by 2012 Jiangxi Province Higher Education Reform Research Provincial Research Project(No.JXJG-12-29-3)
文摘Objective： The aim of this project was to train highly professional and specialized nursing students from medical colleges to adapt to bedside clinical care by exploring and discussing various methods of injection and IV infusion in animal experimentation to hone the core professional nursing competencies. Methods： Two classes from the 2012 senior graduating nursing class were randomly selected by a computer to conduct the diversified practical teaching methods based on animal experimentation. A hospital environment was simulated by requiring students to perform different types of injections and practical IV infusion techniques. A comprehensive evaluation of the core professional competencies, as well as other integrated competencies, was conducted to determine the effectiveness of the teaching methods. Results： Two-sampled, pairwise u-tests were performed between the scores of the experimental （nursing class 2） and control （nursing class 1） groups. These findings showed that the overall test scores were significantly higher in the experimental group compared to the control group and that the average P-values for the competencies in various categories were 〈0.01, which indicated statistically significant results. Conclusions： Based on the data from this project, diversified teaching methods for basic nursing training founded on animal experimentation can help nursing students perfect their core professional competencies and improve their overall professional standing. The introduction of animal experimentation requires further verification, and an increased acknowledgement of its benefits through the widespread dissemination of this information.
基金Supported by the National Natural Science Foundation of China(50805009)
文摘To analyze the spring disturbance torque caused by motionai cable harness in a stabilized platform, the Kirchhoff theory based cable harness model has been previously developed to dynamically simulate the motional cable harness. In this paper, this model was validated by comparing the simulation results with the experiment results （ both the spring force and the deformed profile of the motional cable harness）. In the experiment, a special optical measuring instrument based on binocular vision was developed and the motion and deformation of cable harness were measured. A simpli- fied stabilized platform system was constructed, and the absolute value of spring disturbance force during the motion of this simplified frame was obtained by using a force gauge （0. 02 N precision）. The physical parameters of experimental specimen were also measured. The experimental and simulated results showed good agreement. These results should be useful for better motional cable harness layout design and reliable evaluation of the spring disturbance torque.
文摘Though novel reading is a common experience to everybody,little has been researched to help average readers to understand a novel.In practice,there are two ways for them to understand a novel:one is to use literary criticism theories and the other is to refer to professional critics'criticism directly.However,the trouble is that the two methods are either time-consuming or far from convincing.In this paper,an experimental reading method is discussed to help average readers enhance reading experience.It aims at reaching the goal of reading without criticism,which,through making clear the aim of reading,putting main focus on the story only,will help readers to have a better understanding of reading.
文摘This work is an experimental approach based on the method of experimental plans to determine a specific formulation of a resin concrete. In this study, an unsaturated polyester resin （thermosetting resin） was used with two types of mineral fillers （dune sand and crushed sand）, and with the addition of a marble powder to ensure the continuity of the particle size mixing granular. The lack of the methods for developing this kind of composite materials, had led us to perform an initial experimental approach to define the experimental field, that is to say determine the mass proportions of the various compounds of mixture of our study. In the second approach, we have established and implemented fully experimental plans with three factors namely： factor （1）： sand, factor （2）： resin, factor （3）： marble powder. Test results being the density of polymer concrete and the mechanical resistances. Finally, multi-parameters regression allowed us to determine predictive mathematical models for the different responses of the study. Tests results showed that at three days we got a tensile strength of about 16 MPa with a resin concrete density of 1.9 g/cm3. This shows the advantages of this material.
基金supported by the National Natural Science Foundation of China (Grants 11772188, 11132007)
文摘The impact problem of a flexible multibody system is a non-smooth, high-transient, and strong-nonlinear dynamic process with variable boundary. How to model the contact/impact process accurately and efficiently is one of the main difficulties in many engineering applications. The numerical approaches being used widely in impact analysis are mainly from two fields： multibody system dynamics （MBS） and computational solid mechanics （CSM）. Approaches based on MBS provide a more efficient yet less accurate analysis of the contact/impact problems, while approaches based on CSM are well suited for particularly high accuracy needs, yet require very high computational effort. To bridge the gap between accuracy and efficiency in the dynamic simulation of a flexible multibody system with contacts/impacts, a partition method is presented considering that the contact body is divided into two parts, an impact region and a non-impact region. The impact region is modeled using the finite element method to guarantee the local accuracy, while the non-impact region is modeled using the modal reduction approach to raise the global efficiency. A three-dimensional rod-plate impact experiment is designed and performed to validate the numerical results. The principle for how to partition the contact bodies is proposed： the maximum radius of the impact region can be estimated by an analytical method, and the modal truncation orders of the non-impact region can be estimated by the highest frequency of the signal measured. The simulation results using the presented method are in good agreement with the experimental results. It shows that this method is an effec-rive formulation considering both accuracy and efficiency. Moreover, a more complicated multibody impact problem of a crank slider mechanism is investigated to strengthen this conclusion.
文摘DOE （design of experiments） is a systematic, rigorous approach to engineering problem-solving that applies principles and techniques at the data collection stage so as to ensure the generation of valid, defensible, and supportable engineering conclusions. This paper presents a comparison of three different experimental designs （full experimental design, fractional design and Taguchi design） aimed at studying the effects of cutting parameters variations on surface finish. The results revealed that the effects obtained by analyzing both fractional and Taguchi designs were comparable to the main effects and two-level interactions obtained by the full factorial design. Thus, we conclude that full factorial design appear to be reliable and more economical since they permit to reduce by a factor the amount of time and effort required to conduct the experimental design without losing valuable information. Thus, we conclude that full factorial design appear to be reliable and more economical and without losing valuable information.
基金the Ministry of Education and Science ofthe Republic of Serbia for supporting these investigations through the Project 172052
文摘Method validation presents a detailed investigation of analytical method and provision of the evidence that the method, when correctly applied, produces results that fit to the purpose. In order to achieve the method validation scope efficiently, experimental design presents a very useful tool. The greatest benefits of such approach could be seen in robustness testing through the provision of very useful data about the control of the chromatograp6hic system during the routine application. In this paper, robustness testing of the LC method proposed for the determination of raloxifene hydrochloride and its four impurities was done employing Plackett-Burman design. Applying this design, the effect of five real factors （acetonitrile content, sodium dodecyl sulfate content, column temperature, pH of the mobile phase and flow rate） on the corresponding resolution factors was investigated through twelve experiments. Furthermore, the insignificance intervals for significant factors were calculated and the parameters for system suitability tests were defined. Eventually, the other validation parameters were tested and the effectiveness of the proposed analytical method with a high degree of accuracy was confirmed.
文摘In this paper, on the basis of experimental data of two kinds of chemical explosions, the piston-pushing model of spherical blast-waves and the second-order Godunov-type scheme of finite difference methods with high identification to discontinuity are used to the numerical reconstruction of part of an actual hemispherical blast-wave flow field by properly adjusting the moving bounary conditions of a piston. This method is simple and reliable. It is suitable to the evaluation of effects of the blast-wave flow field away from the explosion center.
文摘An experimental-numerical method for measuring dynamic crack propagatingvelocities under stress wave loading is established in this paper. The experiments of thethree-point bend specimen are done on the improved Hopkinson bar. Deflection of loading point,dynamic load and instantaneous crack length are measured, then crack propagating velocities arecalculated. Experiments on 40Cr steel show that the results given by this method have a goodagreement with that obtained by the resistance fracture gage method. Therefore this method isfeasible for measuring crack propagating velocities under high loading rate and will have wideapplication.
文摘Despite a multitude of theoretical discussions on China's mixed ownership reform, very few studies have addressed realistic questions concerning the implementation of the reform. The Resolutions of the Third Plenum of the 18 th CPC Central Committee and other reform strategies have outlined the reform of sectors with natural monopoly, including urban public utility sectors. The question is how mixed ownership reform should be carried out in sectors of natural monopoly, or which public utilities sectors should enjoy priority of mixed ownership reform. To answer this question, this paper employs data of large public utility enterprises in China from 1998 to 2008, and estimates the natural monopoly attribute at the industry level and corporate total factor productivity(TFP) using cost function analysis method excluding the impact of product price factor. Based on the difference-indifferences-in-differences(DDD) method of natural experiment, an empirical test is carried out for the relationship among natural monopoly, mixed ownership reform and corporate productivity. Our results suggest that:(1) Statistically, mixed ownership reform cannot significantly increase corporate TFP in sectors with natural monopoly;(2) mixed ownership reform should not be carried out indiscriminately on a nationwide basis and for all public utilities sectors. Such an attempt of reform without distinguishing natural monopoly and the level of competitiveness is fraught with policy uncertainties;(3) relative to sectors with natural monopoly, corporate productivity in competitive sectors after mixed ownership reform will improve more significantly and enjoy greater "policy dividends" of institutional reform. Therefore, mixed ownership reform should be carried out first in competitive sectors.
基金Project(52227901)supported by the National Natural Science Foundation of ChinaProject(2308085ME153)supported by the Anhui Provincial Natural Science Foundation,China+2 种基金Project(2022AH030088)supported by the University Natural Science Foundation of Anhui Province,ChinaProject(EC2022011)supported by the Foundation of Joint National-Local Engineering Research Centre for Safe and Precise Coal Mining,ChinaProject(GXXT-2022-020)supported by the University Synergy Innovation Program of Anhui Province,China。
文摘In recent years,rockburst have gained significant attention as a crucial topic in rock engineering.Strain andfault-slip rockburst are two common types that occur frequently and cause substantial damage.The objective of thisreview is to conduct a comprehensive study on the experiments and failure mechanisms of strain and fault-slip rockburst.Firstly,the article analyzes the evolving trends in experimental research on rockburst in the past decade,highlightingmechanical properties and failure modes as the primary research focuses in understanding rockburst mechanisms.Subsequently,it provides an overview of the experimental techniques and methods employed for studying both types ofrockburst.Then,with a focus on the mechanical properties and failure modes,the article conducts an extensive analysisof the failure mechanisms associated with strain and fault-slip rockburst.By analyzing experimental data and observingthe failure characteristics of samples,it discusses the variations and common features exhibited by these two types ofrockburst under various test conditions.This analysis is of paramount importance in revealing the causes of rockburstformation and development,as well as in predicting rockburst trends and assessing associated risks.Lastly,thelimitations of current rockburst experiments and future research directions are discussed,followed by a comprehensivesummary of the entire article.
基金Supported by the National Basic Research Program of China under Grant No 2014CB340102
文摘To overcome the shortcomings of the traditional passive ranging technology based on image, such as poor ranging accuracy, low reliability and complex system, a new visual passive ranging method based on re-entrant coaxial optical path is presented. The target image is obtained using double cameras with coaxial optical path. Since there is imaging optical path difference between the cameras, the images are different. In comparison of the image differences, the target range could be reversed. The principle of the ranging method and the ranging model are described. The relationship among parameters in the ranging process is analyzed quantitatively. Meanwhile,the system composition and technical realization scheme are also presented. Also, the principle of the method is verified by the equivalent experiment. The experimental results show that the design scheme is correct and feasible with good robustness. Generally, the ranging error is less than 10% with good convergence. The optical path is designed in a re-entrant mode to reduce the volume and weight of the system. Through the coaxial design,the visual passive range of the targets with any posture can be obtained in real time. The system can be widely used in electro-optical countermeasure and concealed photoelectric detection.
文摘In this paper the main sources causing the scatter of the experimental results of the material parameters are discussed. They can be divided into two parts: one is the experimental errors which are introduced because of the inaccuracy of experimental equipment, the experimental techniques, etc., and the form of the scatter caused by this source is called external distribution. The other is due to the irregularity and inhomogeneity of the material structure and the randomness of deformation process. The scatter caused by this source is inherent and then this form of the scatter is called internal distribution. Obviously the experimental distribution of material parameters combines these two distributions in some way; therefore, it is a sum distribution of the external distribution and the internal distribution. In view of this , a general method used to analyse the influence of the experimental errors on the experimental results is presented, and three criteria used to value this influence are defined. An example in which the fracture toughness KIC is analysed shows that this method is reasonable, convenient and effective.
文摘Different Ziegler-Natta catalysts were employed to polymerize ethylene. To investigate the influences of reaction parameters, namely Al/Ti molar ratio, hydrogen and processing parameters, i.e. ethylene pressure and temperature, a Taguchi experimental design was worked out. An L27 orthogonal array was chosen to take the above-mentioned parameters and relevant interactions into account. Response surface method was the tool used to analyze the experimental design results. Al/Ti, ethylene pressure and temperature were selected as experimental design factors, and catalyst activity and polymerization yield were the response parameters. Increasing pressure, due to an increment in monomer accessibility, and rising Al/Ti, because of higher reduction in the catalysts, cause an increase in both polymerization yield and catalyst activity. Nonetheless, a higher temperature, thanks to reducing ethylene solubility in the slurry medium and partially catalyst destruction, lead to a reduction in both response parameters. A synergistic effect was also observed between temperature and pressure. All catalyst activities will reduce in the presence of hydrogen. Molecular weight also shows a decline in the presence of hydrogen as a transfer agent. However, the polydispersity index remains approximately intact. Using SEM, various morphologies, owing to different catalyst morphologies, were seen for the polyethylene.
