Heat transfer of liquid evaporation was studied in a recirculating three-phase fluidized bedin which an inert gas serving as'carrying gas'was introduced.The gas velocities,particle sizes,par-ticle densities an...Heat transfer of liquid evaporation was studied in a recirculating three-phase fluidized bedin which an inert gas serving as'carrying gas'was introduced.The gas velocities,particle sizes,par-ticle densities and particle concentrations in the liquid were examined.Heat fluxes were measured aswell.Significant enhancement in heat transfer was resulted when an inert gas and solid particles wereintroduced into the flow boiling liquid.Scaling mitigation was to be expected in the process.展开更多
The purpose of this paper is to study the energy efficiency of a local living space exposed to solar radiation in the subtropical climate of Casablanca. The study was mainly focused on the contribution of a phase chan...The purpose of this paper is to study the energy efficiency of a local living space exposed to solar radiation in the subtropical climate of Casablanca. The study was mainly focused on the contribution of a phase change material (PCM), inserted into a 7-cm thick air layer of a double brick wall, in two different locations. We note that the experimental study was conducted using two real-scale test cavities, located in the Faculty of Science Ain Chock-Casablanca. Two PCM mounting methods were used for the south and west walls, in order to test its energy efficiency as a storage and retrieval means of the solar flux coming from the outside. In the case of the southern wall, the PCM is put directly on the internal side of the outside part of the double wall (Case 1). For the west wall, the PCM is placed 1.2 cm away from the internal side of the outer part of the double wall (Case 2). The first result shows that the PCM placed to the wall allows storing the solar heat during the day and releasing it to the outside of the building at night. While in the second case, the PCM keeps the heat stored day and night.展开更多
Experimental investigations were carried out to determine the Al2O3/water and SiO2/water nanofluids flowing through a circular tube. convective heat transfer performance and pressure drop of Measurements show that the...Experimental investigations were carried out to determine the Al2O3/water and SiO2/water nanofluids flowing through a circular tube. convective heat transfer performance and pressure drop of Measurements show that the addition of small amounts of nano-sized Al2O3 particles to the base fluid increases heat transfer coefficients considerably, while the result for the silica nanofluids contradicts with the alumina nanofluids and this leads to some interesting results. In the case of alumina nanofluids, an average increase of 16% in convective heat transfer coefficient is observed with an average penalty of 28% in pressure drop. Moreover, flow resistance increases significantly compared to the base fluid even at very low concentrations of nanofluids. Finally, measured heat transfer coefficients are compared with predicted ones from the correlation of Shah under the same conditions.展开更多
Understanding how the transpiration of this vegetation type responds to environmental stress is important for determining the wa-ter-balance dynamics of the riparian ecosystem threatened by groundwater depletion. Tran...Understanding how the transpiration of this vegetation type responds to environmental stress is important for determining the wa-ter-balance dynamics of the riparian ecosystem threatened by groundwater depletion. Transpiration and sap flow were measured using the heat-pulse technique. The results were then projected up to the stand level to investigate the stand’s water-use in relation to climate forcing in the desert riparian forest in an extreme arid region. This study took place from April through October 2003 and from May through October 2004. The experimental site was selected in the Populus euphratica Forest Reserve (101o10' E, 41o59' N) in Ejina county, in the lower Heihe River basin, China. The sapwood area was used as a scalar to extrapolate the stand-water consumption from the whole trees’ water consumption measured by the heat-pulse velocity recorder (HPVR). Scale transferring from a series of individual trees to a stand was done according to the existing natural variations between trees under given environmental conditions. The application of the biometric parameters available from individual tree and stand levels was proved suitable for this purpose. A significant correlation between the sapwood area and tree diameter at breast height (DBH) was found. The prediction model is well fitted by the power model. On the basis of the prediction model, the sapwood area can be cal-culated by DBH. The sap-flow density can then be used to extrapolate the stand-water use by means of a series of mathematical models.展开更多
Film-boiling heat transfer is a key phenomenon governing severe accident sequence in a sodium-cooled fast reactor. Experimental the fuel-coolant interaction process which may occur during a and theoretical work on fil...Film-boiling heat transfer is a key phenomenon governing severe accident sequence in a sodium-cooled fast reactor. Experimental the fuel-coolant interaction process which may occur during a and theoretical work on film-boiling heat transfer in sodium has hardly been carried out in the past. An experiment has been conducted in the early seventies to investigate sodium pool boiling. In this experiment, a hot tantalum sphere was immersed into subcooled liquid sodium. Film boiling was obtained for various sets of parameters： sodium subcooling from 4.1 K to 29. 1 K, initial sphere temperature ranging from 1,802.6 K to 2,633.7 K, sphere diameters of 1.27, 1.91 and 2.54 cm and sodium depths of 7.6 cm and 11.4 cm. In the present work, a simplified analysis based on the boundary layer theory is developed to describe pool film-boiling heat transfer on a hot sphere in liquid sodium. Two extreme cases are considered depending on sodium subcooling. In the case of high subcooling, most of the heat lost by the sphere is used to heat the sodium while for low subcooling, it is used to vaporize the liquid at the liquid-vapor interface. It will be shown that the scaling analysis predicts the heat fluxes within the order of magnitude when compared to the available experimental data. Besides, it allows an estimation of the contribution of these fluxes to the liquid heating and vaporization processes.展开更多
The solution to heat transfer problems in two-dimensional heterogeneous media is attended based on the scaled boundary finite element method(SBFEM)coupled with equilibrated basis functions(EqBFs).The SBFEM reduces the...The solution to heat transfer problems in two-dimensional heterogeneous media is attended based on the scaled boundary finite element method(SBFEM)coupled with equilibrated basis functions(EqBFs).The SBFEM reduces the model order by scaling the boundary solution onto the inner element.To this end,tri-lateral elements are emanated from a scaling center,followed by the development of a semi-analytical solution along the radial direction and a finite element solution along the circumferential/boundary direction.The discretization is thus limited to the boundaries of the model,and the semi-analytical radial solution is found through the solution of an eigenvalue problem,which restricts the methods’applicability to heterogeneous media.In this research,we first extracted the SBFEM formulation considering the heterogeneity of the media.Then,we replaced the semi-analytical radial solution with the EqBFs and removed the eigenvalue solution step from the SBFEM.The varying coefficients of the partial differential equation(PDE)resulting from the heterogeneity of the media are replaced by a finite series in the radial and circumferential directions of the element.A weighted residual approach is applied to the radial equation.The equilibrated radial solution series is used in the new formulation of the SBFEM.展开更多
Using ethanol or acetone as the working fluid, visualization of oscillations in steady state was observed visually by high-speed cameras, and temperature oscillating and heat transfer characteristics of closed-loop pl...Using ethanol or acetone as the working fluid, visualization of oscillations in steady state was observed visually by high-speed cameras, and temperature oscillating and heat transfer characteristics of closed-loop plate oscillating heat pipe with parallel channels(POHP-PC) were experimentally investigated by varying liquid filled ratios(50%, 70%, 85%), section scales(1 mm×1 mm and 1 mm×1.5 mm), inclination angles, working fluids and heating inputs. It was found that during operating there was mixed flow consisting of plug flow and annular flow in channels of oscillating heat pipe at steady-state. There was an equilibrium position for working fluid of condenser during oscillating, and periodic oscillations occurred up and down in the vicinity of equilibrium position. With heat input increasing, equilibrium position rose slowly as a result of vapor pressure of evaporation.Evaporation temperature oscillating amplitude possessed a trend of small-large-small and frequency trend was of small-large during steady-state. It may be generally concluded that temperature, whether evaporator or condenser, fluctuated sharply or rose continuously when oscillating heat pipe coming to dry burning state. Simultaneously, it was found that temperature difference of cooling water possibly dropped with heat input rising during dry burning state. Thermal resistance of No. 2 with acetone was lower than that of No. 1 during experiments, but No. 2 achieving heat transfer limit was earlier than No. 1. However, with ethanol, thermal resistance of No. 1 and No. 2 were similar with the heating input less than 110-120 W and filling ratios of 50% and 70%. And with filling ratio of 85%, heating transfer performance of No. 2 was better compared to No. 1 during all the experiments.展开更多
In this paper, large eddy simulation coupled with a dynamic subgrid scale (SGS) model is used to study turbulent channel flows with heat transfer. Some fundamental flow behaviors are discussed. Based on our calculate...In this paper, large eddy simulation coupled with a dynamic subgrid scale (SGS) model is used to study turbulent channel flows with heat transfer. Some fundamental flow behaviors are discussed. Based on our calculated results, the dynamic SGS model can reasonably predict some main characteristics of stratified turbulent channel flows. Our results are also in good agreement with theoretical analyses and previous calculated results.展开更多
A two-scale analysis (TSA) method for predicting the heat transfer performance of composite materials with the random distribution of same-scale grains is presented. First the representation of the materials with the ...A two-scale analysis (TSA) method for predicting the heat transfer performance of composite materials with the random distribution of same-scale grains is presented. First the representation of the materials with the random distribution is briefly described. Then the two-scale analysis formulation of heat transfer behavior of the materials with random grain distribution of small periodicity is formally derived by means of construction way for each cell. Finally the numerical result on the heat transfer parameters of composite materials is shown. The numerical result shows that TSA is effective to predict the heat transfer performance of composite materials with random grain distribution.展开更多
A millimeter scale butterfly-shaped reactor was proposed based on sizing-up strategy and fabricated via femtosecond laser engraving. An improvement of mixing performance and residence time distribution was realized by...A millimeter scale butterfly-shaped reactor was proposed based on sizing-up strategy and fabricated via femtosecond laser engraving. An improvement of mixing performance and residence time distribution was realized by means of contraction and expansion of the reaction channel. The liquid holdup was greatly increased through connection of multiple mixing units. Structure optimization of the reactor was carried out by computational fluid dynamics simulation, from which the effect of reactor internals on mixing and the influence of parallel branching structure on heat transfer were discussed. The UV–vis absorption spectroscopy was used to determine the residence time distribution in the reactor, and characteristic parameters such as skewness and dimensionless variance were obtained. Further, a chained stagnant flow model was proposed to precisely describe the trailing phenomenon caused by fluid stagnation and laminar flow in small scale reactors, which enables a better fit for the experimental results of the asymmetric residence time distribution. In addition, the heat transfer performance of the reactor was investigated, and the overall heat transfer coefficient was 110–600 W m^(-2)K-1in the flow rate range of 10–40 m L/min.展开更多
Reliable transient thermal analysis plays a very important role in the engine safety analysis.Transient conjugate heat transfer simulation is an important way of temperature analysis.But there exists a great disparity...Reliable transient thermal analysis plays a very important role in the engine safety analysis.Transient conjugate heat transfer simulation is an important way of temperature analysis.But there exists a great disparity in the time scales between solid conduction and fluid convection.The calculation cost of transient conjugate heat transfer analysis is very huge because of the tiny time step of computational fluid dynamics.The Bi-Fo time scaling method is proposed to improve the computational efficiency of transient conjugate heat transfer.On the one hand,this method carries out a similar transformation on solid heat conduction,scaling the calculation time with the product of density and specific heat capacity to maintain the consistency of Fourier number.On the other hand,it takes very short time for the fluid domain to recover stability after a boundary disturbance.Based on the above characteristic,the flow time is directly compressed to the same as that of the solid domain.It is verified by Mark II vane that increasing the solid thermal diffusivity can reduce the time scale of heat conduction.In the situation of rapidly stable flow field,scaling flow time does not affect the solid thermal boundary under corresponding dimensionless time.Within the application scope,the Bi-Fo time scaling method can greatly reduce the time cost of transient conjugate heat transfer simulation while maintaining the accuracy of transient temperature analysis.展开更多
基金Supported by the National Natural Science Foundation of China.
文摘Heat transfer of liquid evaporation was studied in a recirculating three-phase fluidized bedin which an inert gas serving as'carrying gas'was introduced.The gas velocities,particle sizes,par-ticle densities and particle concentrations in the liquid were examined.Heat fluxes were measured aswell.Significant enhancement in heat transfer was resulted when an inert gas and solid particles wereintroduced into the flow boiling liquid.Scaling mitigation was to be expected in the process.
文摘The purpose of this paper is to study the energy efficiency of a local living space exposed to solar radiation in the subtropical climate of Casablanca. The study was mainly focused on the contribution of a phase change material (PCM), inserted into a 7-cm thick air layer of a double brick wall, in two different locations. We note that the experimental study was conducted using two real-scale test cavities, located in the Faculty of Science Ain Chock-Casablanca. Two PCM mounting methods were used for the south and west walls, in order to test its energy efficiency as a storage and retrieval means of the solar flux coming from the outside. In the case of the southern wall, the PCM is put directly on the internal side of the outside part of the double wall (Case 1). For the west wall, the PCM is placed 1.2 cm away from the internal side of the outer part of the double wall (Case 2). The first result shows that the PCM placed to the wall allows storing the solar heat during the day and releasing it to the outside of the building at night. While in the second case, the PCM keeps the heat stored day and night.
文摘Experimental investigations were carried out to determine the Al2O3/water and SiO2/water nanofluids flowing through a circular tube. convective heat transfer performance and pressure drop of Measurements show that the addition of small amounts of nano-sized Al2O3 particles to the base fluid increases heat transfer coefficients considerably, while the result for the silica nanofluids contradicts with the alumina nanofluids and this leads to some interesting results. In the case of alumina nanofluids, an average increase of 16% in convective heat transfer coefficient is observed with an average penalty of 28% in pressure drop. Moreover, flow resistance increases significantly compared to the base fluid even at very low concentrations of nanofluids. Finally, measured heat transfer coefficients are compared with predicted ones from the correlation of Shah under the same conditions.
基金supported by the National Natural Science Foundation of China (40725001 40501012)+1 种基金drought mete-orological scientific research fund projects (IAM200707)the Knowledge Innovation Program from the Chinese Academy of Sciences (KZCX2-XB2-04)
文摘Understanding how the transpiration of this vegetation type responds to environmental stress is important for determining the wa-ter-balance dynamics of the riparian ecosystem threatened by groundwater depletion. Transpiration and sap flow were measured using the heat-pulse technique. The results were then projected up to the stand level to investigate the stand’s water-use in relation to climate forcing in the desert riparian forest in an extreme arid region. This study took place from April through October 2003 and from May through October 2004. The experimental site was selected in the Populus euphratica Forest Reserve (101o10' E, 41o59' N) in Ejina county, in the lower Heihe River basin, China. The sapwood area was used as a scalar to extrapolate the stand-water consumption from the whole trees’ water consumption measured by the heat-pulse velocity recorder (HPVR). Scale transferring from a series of individual trees to a stand was done according to the existing natural variations between trees under given environmental conditions. The application of the biometric parameters available from individual tree and stand levels was proved suitable for this purpose. A significant correlation between the sapwood area and tree diameter at breast height (DBH) was found. The prediction model is well fitted by the power model. On the basis of the prediction model, the sapwood area can be cal-culated by DBH. The sap-flow density can then be used to extrapolate the stand-water use by means of a series of mathematical models.
文摘Film-boiling heat transfer is a key phenomenon governing severe accident sequence in a sodium-cooled fast reactor. Experimental the fuel-coolant interaction process which may occur during a and theoretical work on film-boiling heat transfer in sodium has hardly been carried out in the past. An experiment has been conducted in the early seventies to investigate sodium pool boiling. In this experiment, a hot tantalum sphere was immersed into subcooled liquid sodium. Film boiling was obtained for various sets of parameters： sodium subcooling from 4.1 K to 29. 1 K, initial sphere temperature ranging from 1,802.6 K to 2,633.7 K, sphere diameters of 1.27, 1.91 and 2.54 cm and sodium depths of 7.6 cm and 11.4 cm. In the present work, a simplified analysis based on the boundary layer theory is developed to describe pool film-boiling heat transfer on a hot sphere in liquid sodium. Two extreme cases are considered depending on sodium subcooling. In the case of high subcooling, most of the heat lost by the sphere is used to heat the sodium while for low subcooling, it is used to vaporize the liquid at the liquid-vapor interface. It will be shown that the scaling analysis predicts the heat fluxes within the order of magnitude when compared to the available experimental data. Besides, it allows an estimation of the contribution of these fluxes to the liquid heating and vaporization processes.
文摘The solution to heat transfer problems in two-dimensional heterogeneous media is attended based on the scaled boundary finite element method(SBFEM)coupled with equilibrated basis functions(EqBFs).The SBFEM reduces the model order by scaling the boundary solution onto the inner element.To this end,tri-lateral elements are emanated from a scaling center,followed by the development of a semi-analytical solution along the radial direction and a finite element solution along the circumferential/boundary direction.The discretization is thus limited to the boundaries of the model,and the semi-analytical radial solution is found through the solution of an eigenvalue problem,which restricts the methods’applicability to heterogeneous media.In this research,we first extracted the SBFEM formulation considering the heterogeneity of the media.Then,we replaced the semi-analytical radial solution with the EqBFs and removed the eigenvalue solution step from the SBFEM.The varying coefficients of the partial differential equation(PDE)resulting from the heterogeneity of the media are replaced by a finite series in the radial and circumferential directions of the element.A weighted residual approach is applied to the radial equation.The equilibrated radial solution series is used in the new formulation of the SBFEM.
基金Project(51306198)supported by the National Natural Science Foundation of ChinaProject(NR2013K07)supported by Beijing Key Lab of Heating,Gas Supply,Ventilating and Air Conditioning Engineering,China+1 种基金Project(331614013)supported by Beijing University of Civil Engineering and Architecture,ChinaProject(00921915023)supported by Organization Department of Beijing,China
文摘Using ethanol or acetone as the working fluid, visualization of oscillations in steady state was observed visually by high-speed cameras, and temperature oscillating and heat transfer characteristics of closed-loop plate oscillating heat pipe with parallel channels(POHP-PC) were experimentally investigated by varying liquid filled ratios(50%, 70%, 85%), section scales(1 mm×1 mm and 1 mm×1.5 mm), inclination angles, working fluids and heating inputs. It was found that during operating there was mixed flow consisting of plug flow and annular flow in channels of oscillating heat pipe at steady-state. There was an equilibrium position for working fluid of condenser during oscillating, and periodic oscillations occurred up and down in the vicinity of equilibrium position. With heat input increasing, equilibrium position rose slowly as a result of vapor pressure of evaporation.Evaporation temperature oscillating amplitude possessed a trend of small-large-small and frequency trend was of small-large during steady-state. It may be generally concluded that temperature, whether evaporator or condenser, fluctuated sharply or rose continuously when oscillating heat pipe coming to dry burning state. Simultaneously, it was found that temperature difference of cooling water possibly dropped with heat input rising during dry burning state. Thermal resistance of No. 2 with acetone was lower than that of No. 1 during experiments, but No. 2 achieving heat transfer limit was earlier than No. 1. However, with ethanol, thermal resistance of No. 1 and No. 2 were similar with the heating input less than 110-120 W and filling ratios of 50% and 70%. And with filling ratio of 85%, heating transfer performance of No. 2 was better compared to No. 1 during all the experiments.
文摘In this paper, large eddy simulation coupled with a dynamic subgrid scale (SGS) model is used to study turbulent channel flows with heat transfer. Some fundamental flow behaviors are discussed. Based on our calculated results, the dynamic SGS model can reasonably predict some main characteristics of stratified turbulent channel flows. Our results are also in good agreement with theoretical analyses and previous calculated results.
基金This work was supported by the Special Funds for Major State Basic Research Projectthe National Natural Science Foundation of China(Grant No.19932030).
文摘A two-scale analysis (TSA) method for predicting the heat transfer performance of composite materials with the random distribution of same-scale grains is presented. First the representation of the materials with the random distribution is briefly described. Then the two-scale analysis formulation of heat transfer behavior of the materials with random grain distribution of small periodicity is formally derived by means of construction way for each cell. Finally the numerical result on the heat transfer parameters of composite materials is shown. The numerical result shows that TSA is effective to predict the heat transfer performance of composite materials with random grain distribution.
基金funded by the National Natural Science Foundation of China (Nos. 21991103, 21991104, 22008074, 22008072)Natural Science Foundation of Shanghai (No. 20ZR1415700)China Postdoctoral Science Foundation (Nos. 2020M671025,2019TQ0093)。
文摘A millimeter scale butterfly-shaped reactor was proposed based on sizing-up strategy and fabricated via femtosecond laser engraving. An improvement of mixing performance and residence time distribution was realized by means of contraction and expansion of the reaction channel. The liquid holdup was greatly increased through connection of multiple mixing units. Structure optimization of the reactor was carried out by computational fluid dynamics simulation, from which the effect of reactor internals on mixing and the influence of parallel branching structure on heat transfer were discussed. The UV–vis absorption spectroscopy was used to determine the residence time distribution in the reactor, and characteristic parameters such as skewness and dimensionless variance were obtained. Further, a chained stagnant flow model was proposed to precisely describe the trailing phenomenon caused by fluid stagnation and laminar flow in small scale reactors, which enables a better fit for the experimental results of the asymmetric residence time distribution. In addition, the heat transfer performance of the reactor was investigated, and the overall heat transfer coefficient was 110–600 W m^(-2)K-1in the flow rate range of 10–40 m L/min.
基金This study was supported by major project of National Science Foundation of China(No.61890923).
文摘Reliable transient thermal analysis plays a very important role in the engine safety analysis.Transient conjugate heat transfer simulation is an important way of temperature analysis.But there exists a great disparity in the time scales between solid conduction and fluid convection.The calculation cost of transient conjugate heat transfer analysis is very huge because of the tiny time step of computational fluid dynamics.The Bi-Fo time scaling method is proposed to improve the computational efficiency of transient conjugate heat transfer.On the one hand,this method carries out a similar transformation on solid heat conduction,scaling the calculation time with the product of density and specific heat capacity to maintain the consistency of Fourier number.On the other hand,it takes very short time for the fluid domain to recover stability after a boundary disturbance.Based on the above characteristic,the flow time is directly compressed to the same as that of the solid domain.It is verified by Mark II vane that increasing the solid thermal diffusivity can reduce the time scale of heat conduction.In the situation of rapidly stable flow field,scaling flow time does not affect the solid thermal boundary under corresponding dimensionless time.Within the application scope,the Bi-Fo time scaling method can greatly reduce the time cost of transient conjugate heat transfer simulation while maintaining the accuracy of transient temperature analysis.
