In this paper, a new control system based on forearm electromyogram （EMG） is proposed for computer peripheral control and artificial prosthesis control. This control system intends to realize the commands of six pre...In this paper, a new control system based on forearm electromyogram （EMG） is proposed for computer peripheral control and artificial prosthesis control. This control system intends to realize the commands of six pre-defined hand poses： up, down, left, right, yes, and no. In order to research the possibility of using a unified amplifier for both electroencephalogram （EEG） and EMG, the surface forearm EMG data is acquired by a 4-channel EEG measurement system. The Bayesian classifier is used to classify the power spectral density （PSD） of the signal. The experiment result verifies that this control system can supply a high command recognition rate （average 48%） even the EMG data is collected with an EEG system just with single electrode measurement.展开更多
Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly urgent.Multi-component interface engineering is con...Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly urgent.Multi-component interface engineering is considered an effective means to achieve high-efficiency EMW absorption.However,interface modulation engineering has not been fully discussed and has great potential in the field of EMW absorption.In this study,multi-component tin compound fiber composites based on carbon fiber(CF)substrate were prepared by electrospinning,hydrothermal synthesis,and high-temperature thermal reduction.By utilizing the different properties of different substances,rich heterogeneous interfaces are constructed.This effectively promotes charge transfer and enhances interfacial polarization and conduction loss.The prepared SnS/SnS_(2)/SnO_(2)/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt%in epoxy resin.The minimum reflection loss(RL)is−46.74 dB and the maximum effective absorption bandwidth is 5.28 GHz.Moreover,SnS/SnS_(2)/SnO_(2)/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel surfaces.Therefore,this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.展开更多
The pre-wetting of aggregate surface is a means to improve the interface performance of SBS modified asphalt and aggregate.The effect of pre-wetting technology on the interaction between SBS modified asphalt and aggre...The pre-wetting of aggregate surface is a means to improve the interface performance of SBS modified asphalt and aggregate.The effect of pre-wetting technology on the interaction between SBS modified asphalt and aggregate was analyzed by molecular dynamics simulation.The diffusion coefficient and concentration distribution of SBS modified asphalt on aggregate surface are included.The simulation results show that the diffusion coefficient of the aggregate surface of SBS modified asphalt is increased by 47.6%and 70.5%respectively after 110#asphalt and 130#asphalt are pre-wetted.The concentration distribution of SBS modified asphalt on the aggregate surface after pre-wetting is more uniform.According to the results of interface energy calculation,the interface energy of SBS modified bitumen and aggregate can be increased by about 5%after pre-wetting.According to the results of molecular dynamics simulation,the pre-wetting technology can effectively improve the interface workability of SBS modified bitumen and aggregate,so as to improve the interface performance.展开更多
In recent years, computer assisted surgery （CAS） systems become more and more common in clinical practices, but few specific design criteria have been proposed for human-computer interface （HCI） in GAS systems. Th...In recent years, computer assisted surgery （CAS） systems become more and more common in clinical practices, but few specific design criteria have been proposed for human-computer interface （HCI） in GAS systems. This paper tried to give universal criteria of HCI design for CAS systems through introduction of demonstration application, which is total knee replacement （TKR） with a nonimage-based navigation system. A typical computer assisted process can be divided into four phases： the preoperative planning phase, the intraoperative registration phase, the intraoperative navigation phase and finally the postoperative assessment phase. The interface design for four steps is described respectively in the demonstration application. These criteria this paper summarized can be useful to software developers to achieve reliable and effective interfaces for new CAS systems more easily.展开更多
In order to solve the problem of poor formability caused by different materials and properties in the process of tailor-welded sheets forming,a forming method was proposed to change the stress state of tailor-welded s...In order to solve the problem of poor formability caused by different materials and properties in the process of tailor-welded sheets forming,a forming method was proposed to change the stress state of tailor-welded sheets by covering the tailor-welded sheets with better plastic properties overlapping sheets.At the same time,the interface friction effect between the overlapping and tailor-welded sheets was utilized to control the stress magnitude and further improve the formability and quality of the tailor-welded sheets.In this work,the bulging process of the tailor-welded overlapping sheets was taken as the research object.Aluminum alloy tailor-welded overlapping sheets bulging specimens were studied by a combination of finite element analysis and experimental verification.The results show that the appropriate use of interface friction between tailor-welded and overlapping sheets can improve the formability of tailor-welded sheets and control the flow of weld seam to improve the forming quality.When increasing the interface friction coefficient on the side of tailor-welded sheets with higher strength and decreasing that on the side of tailor-welded sheets with lower strength,the deformation of the tailor-welded sheets are more uniform,the offset of the weld seam is minimal,the limit bulging height is maximal,and the forming quality is optimal.展开更多
As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal...As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.展开更多
Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and...Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.展开更多
The rapid development of the information era has led to in-creased power consumption,which generates more heat.This requires more efficient thermal management systems,with the most direct ap-proach being the developme...The rapid development of the information era has led to in-creased power consumption,which generates more heat.This requires more efficient thermal management systems,with the most direct ap-proach being the development of su-perior thermal interface materials(TIMs).Mesocarbon microbeads(MCMBs)have several desirable properties for this purpose,includ-ing high thermal conductivity and excellent thermal stability.Although their thermal conductivity(K)may not be exceptional among all carbon materials,their ease of production and low cost make them ideal filler materials for developing a new generation of carbon-based TIMs.We report the fabrication of high-performance TIMs by incorporating MCMBs in a polyimide(PI)framework,producing highly graphitized PI/MCMB(PM)foams and anisotropic polydimethylsiloxane/PM(PDMS/PM)composites with a high thermal conductivity using directional freezing and high-temperature thermal annealing.The resulting materials had a high through-plane(TP)K of 15.926 W·m^(−1)·K^(−1),4.83 times that of conventional thermally conductive silicone pads and 88.5 times higher than that of pure PDMS.The composites had excellent mechanical properties and thermal stability,meeting the de-mands of modern electronic products for integration,multi-functionality,and miniaturization.展开更多
Efficient utilization of electrostatic charges is paramount for numerous applications,from printing to kinetic energy harvesting.However,existing technologies predominantly focus on the static qualities of these charg...Efficient utilization of electrostatic charges is paramount for numerous applications,from printing to kinetic energy harvesting.However,existing technologies predominantly focus on the static qualities of these charges,neglecting their dynamic capabilities as carriers for energy conversion.Herein,we report a paradigm-shifting strategy that orchestrates the swift transit of surface charges,generated through contact electrification,via a freely moving droplet.This technique ingeniously creates a bespoke charged surface which,in tandem with a droplet acting as a transfer medium to the ground,facilitates targeted charge displacement and amplifies electrical energy collection.The spontaneously generated electric field between the charged surface and needle tip,along with the enhanced water ionization under the electric field,proves pivotal in facilitating controlled charge transfer.By coupling the effects of charge self-transfer,contact electrification,and electrostatic induction,a dual-electrode droplet-driven(DD)triboelectric nanogenerator(TENG)is designed to harvest the water-related energy,exhibiting a two-orderof-magnitude improvement in electrical output compared to traditional single-electrode systems.Our strategy establishes a fundamental groundwork for efficient water drop energy acquisition,offering deep insights and substantial utility for future interdisciplinary research and applications in energy science.展开更多
Interface chemical modulation strategies are considered as promising method to prepare electrocatalysts for the urea oxidation reaction(UOR).However,conventional interface catalysts are generally limited by the inhere...Interface chemical modulation strategies are considered as promising method to prepare electrocatalysts for the urea oxidation reaction(UOR).However,conventional interface catalysts are generally limited by the inherent activity and incompatibility of the individual components themselves,and the irregular charge distribution and slow charge transfer ability between interfaces severely limit the activity of UOR.Therefore,we optimized and designed a Ni_(2)P/CoP interface with modulated surface charge distribution and directed charge transfer to promote UOR activity.Density functional theorycalculations first predict a regular charge transfer from CoP to Ni_(2)P,which creates a built-in electric field between Ni_(2)P and CoP interface.Optimization of the adsorption/desorption process of UOR/HER reaction intermediates leads to the improvement of catalytic activity.Electrochemical impedance spectroscopy and ex situ X-ray photoelectron spectroscopy characterization confirm the unique mechanism of facilitated reaction at the Ni_(2)P/CoP interface.Electrochemical tests further validated the prediction with excellent UOR/HER activities of 1.28 V and 19.7 mV vs.RHE,at 10 mA cm^(-2),respectively.Furthermore,Ni_(2)P/CoP achieves industrial-grade current densities(500 mA cm^(−2))at 1.75 V and 1.87 V in the overall urea electrolyzer(UOR||HER)and overall human urine electrolyzer(HUOR||HER),respectively,and demonstrates considerable durability.展开更多
Bionic interfaces exhibit multiscale features with various functions that reduce energy consumption and produce renewable resources to support life,triggering them an emerging area of technological revolution in many ...Bionic interfaces exhibit multiscale features with various functions that reduce energy consumption and produce renewable resources to support life,triggering them an emerging area of technological revolution in many disciplines.To improve the design and fabrication flexibility,additive manufacturing(AM)technology has been attempted to achieve multiscale structures and reconstruct biological functions at interfaces.Emerging AM of bionic interfaces has led to substantial advancements in renewable energy applications in recent years,but some challenges remain to be overcome.This review first presents a basic understanding of bionic mechanisms and typical manufacturing techniques especially AM.Subsequently,it emphasizes the latest progress of the bionic interfaces and AM on various renewable energy applications,such as those for wetting-controlled surfaces,energy harvesting,water treatment,batteries,and catalysts.Finally,it discusses some challenges and provides insights on how bionic interfaces and AM provide innovative solutions for next-generation renewable energy applications.展开更多
An experimental investigation of the dynamics of the interface between two low-viscosity fluids with high density contrast oscillating in a fixed vertical slotted channel has been conducted.It has been found that as t...An experimental investigation of the dynamics of the interface between two low-viscosity fluids with high density contrast oscillating in a fixed vertical slotted channel has been conducted.It has been found that as the amplitude of the liquid column oscillations increases,parametric oscillations of the interface are excited in the form of a standing wave located in the channel plane.In particular,depending on the interfacial tension,the standing waves have a frequency equal to that of liquid piston oscillations(harmonic response),or half of the frequency of oscillations of the liquid column in the channel(subharmonic response).The detected type of instability has a gravitational-capillary nature and is analogous to Faraday waves.The analysis of the overcritical dynamics of wave oscillations indicates that interfacial tension plays a crucial role in determining the type of parametric instability.At high interfacial tension,only synchronous(harmonic)wave modes are observed,and the threshold of the wave excitation is determined by the amplitude of piston oscillations of the liquid column.In this case,the oscillation acceleration does not play a role and has a small value in the threshold of the synchronous mode response.In the case of weak surface tension,subharmonic oscillations are observed.The threshold for the development of these oscillations is determined by the dimensionless acceleration of the oscillating liquid column and remains almost constant with variations in the dimensionless frequency of oscillations.At moderate values of interfacial tension(in the region of moderate dimensionless frequencies),a synchronous wave mode emerges in the stability threshold of the oscillating interface.As the dimensionless acceleration is increased further,a subharmonic mode is excited.The growth of subharmonic oscillations occurs against the background of harmonic wave oscillations,with the oscillations of the interface representing a combination of two standing waves.展开更多
As one of the important components of high-effi-ciency perovskite/silicon series devices,wide-bandgap(WBG)perovskite solar cells(PSCs)have been suffering from serious carrier transport barriers and huge open-circuit v...As one of the important components of high-effi-ciency perovskite/silicon series devices,wide-bandgap(WBG)perovskite solar cells(PSCs)have been suffering from serious carrier transport barriers and huge open-circuit voltage deficit de-rived from non-radiative recombination,especial-ly at the buried interface that are often overlooked.Herein,we combined cationic and anion passiva-tion strategies via ammonium tetra-n-butyl tetrafluoroborate(TBABF_(4))pre-treating the buried interface.Theoretical calculation predicts that the tetrabutylammonium(TBA^(+))organic cations and(tetrafluoroborate)BF_(4)^(−)anions can easily interact with charged interfacial defect.Characterizations further confirm the enhance-ment of carrier transport performance and decrease in defect density upon TBABF4 pre-treat-ment.Consequently,a power conversion efficiency of 21.35%with an ultrahigh filling factor of 84.12%is obtained for 1.68 eV-WBG inverted PSCs.In addition,the device with TBABF4 pre-treatment demonstrates excellent shelf,thermal,and operational stability.展开更多
Cleat serves as the primary flow pathway for coalbed methane(CBM)and water.However,few studies consider the impact of local contact on two-phase flow within cleats.A visual generalized model of endogenous cleats was c...Cleat serves as the primary flow pathway for coalbed methane(CBM)and water.However,few studies consider the impact of local contact on two-phase flow within cleats.A visual generalized model of endogenous cleats was constructed based on microfluidics.A microscopic and mesoscopic observation technique was proposed to simultaneously capture gas-liquid interface morphology of pores and throat and the two-phase flow characteristics in entire cleat system.The local contact characteristics of cleats reduced absolute permeability,which resulted in a sharp increase in the starting pressure.The reduced gas flow capacity narrowed the co-infiltration area and decreased water saturation at the isotonic point in a hydrophilic environment.The increased local contact area of cleats weakened gas phase flow capacity and narrowed the co-infiltration area.Jumping events occurred in methane-water flow due to altered porosity caused by local contact in cleats.The distribution of residual phases changed the jumping direction on the micro-scale as well as the dominant channel on the mesoscale.Besides,jumping events caused additional energy dissipation,which was ignored in traditional two-phase flow models.This might contribute to the overestimation of relative permeability.The work provides new methods and insights for investigating unsaturated flow in complex porous media.展开更多
Silicon stands as a key anode material in lithium-ion battery ascribing to its high energy density.Nevertheless,the poor rate performance and limited cycling life remain unresolved through conventional approaches that...Silicon stands as a key anode material in lithium-ion battery ascribing to its high energy density.Nevertheless,the poor rate performance and limited cycling life remain unresolved through conventional approaches that involve carbon composites or nanostructures,primarily due to the un-controllable effects arising from the substantial formation of a solid electrolyte interphase(SEI)during the cycling.Here,an ultra-thin and homogeneous Ti doping alumina oxide catalytic interface is meticulously applied on the porous Si through a synergistic etching and hydrolysis process.This defect-rich oxide interface promotes a selective adsorption of fluoroethylene carbonate,leading to a catalytic reaction that can be aptly described as“molecular concentration-in situ conversion”.The resultant inorganic-rich SEI layer is electrochemical stable and favors ion-transport,particularly at high-rate cycling and high temperature.The robustly shielded porous Si,with a large surface area,achieves a high initial Coulombic efficiency of 84.7%and delivers exceptional high-rate performance at 25 A g^(−1)(692 mAh g^(−1))and a high Coulombic efficiency of 99.7%over 1000 cycles.The robust SEI constructed through a precious catalytic layer promises significant advantages for the fast development of silicon-based anode in fast-charging batteries.展开更多
Intracortical neural interfaces directly connect brain neurons with external devices to achieve high temporal resolution and spatially precise sampling of neural activity.When applied to freely moving animals,this tec...Intracortical neural interfaces directly connect brain neurons with external devices to achieve high temporal resolution and spatially precise sampling of neural activity.When applied to freely moving animals,this technology provides in-depth insight into the underlying neural mechanisms for their movement and cognition in real-world scenarios.However,the application of implanted devices in freely moving animals is limited by restrictions on their behavioral freedom and physiologic impact.In this paper,four technological directions for ideal implantable neural interface devices are analyzed:higher spatial density,improved biocompatibility,enhanced multimodal detection of electrical/neurotransmitter signals,and more effective neural modulation.Finally,we discuss how these technological developments have been applied to freely moving animals to provide better insight into neuroscience and clinical medicine.展开更多
Global interest in lithium-sulfur batteries as one of the most promising energy storage technologies has been sparked by their low sulfur cathode cost,high gravimetric,volumetric energy densities,abundant resources,an...Global interest in lithium-sulfur batteries as one of the most promising energy storage technologies has been sparked by their low sulfur cathode cost,high gravimetric,volumetric energy densities,abundant resources,and environmental friendliness.However,their practical application is significantly impeded by several serious issues that arise at the cathode-electrolyte interface,such as interface structure degradation including the uneven deposition of Li_(2)S,unstable cathode-electrolyte interphase(CEI)layer and intermediate polysulfide shuttle effect.Thus,an optimized cathode-electrolyte interface along with optimized electrodes is required for overall improvement.Herein,we comprehensively outline the challenges and corresponding strategies,including electrolyte optimization to create a dense CEI layer,regulating the Li_(2)S deposition pattern,and inhibiting the shuttle effect with regard to the solid-liquid-solid pathway,the transformation from solid-liquid-solid to solid-solid pathway,and solid-solid pathway at the cathode-electrolyte interface.In order to spur more perceptive research and hasten the widespread use of lithium-sulfur batteries,viewpoints on designing a stable interface with a deep comprehension are also put forth.展开更多
1.Introduction Mobile communications have catalyzed a new era of informa-tion technology revolution,significantly broadening and deepen-ing human-to-human,human-to-machine,and machine-to-machine connections.With their...1.Introduction Mobile communications have catalyzed a new era of informa-tion technology revolution,significantly broadening and deepen-ing human-to-human,human-to-machine,and machine-to-machine connections.With their incredible speed of development and wide-reaching impact,mobile communications serve as the cornerstone of the Internet of Everything,profoundly reshaping human cognitive abilities and ways of thinking.Furthermore,mobile communications are altering the patterns of production and life,driving leaps in productivity quality,and strongly promot-ing innovation within human civilization.展开更多
Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interfa...Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interface dynamics influenced by complex topology commonly leads to non-wetting fluid trapping.Particularly,the underlying mechanisms under viscously unfavorable conditions remain unclear.This study employs a direct numerical simulation method to simulate forced imbibition through the reconstructed digital rocks of sandstone.The interface dynamics and fluid–fluid interactions are investigated through transient simulations,while the pore topology metrics are introduced to analyze the impact on steady-state residual fluid distribution obtained by a pseudo-transient scheme.The results show that the cooperative pore-filling process promoted by corner flow is dominant at low capillary numbers.This leads to unstable inlet pressure,mass flow,and interface curvature,which correspond to complicated interface dynamics and higher residual fluid saturation.During forced imbibition,the interface curvature gradually increases,with the pore-filling mechanisms involving the cooperation of main terminal meniscus movement and arc menisci filling.Complex topology with small diameter pores may result in the destabilization of interface curvature.The residual fluid saturation is negatively correlated with porosity and pore throat size,and positively correlated with tortuosity and aspect ratio.A large mean coordination number characterizing global connectivity promotes imbibition.However,high connectivity characterized by the standardized Euler number corresponding to small pores is associated with a high probability of non-wetting fluid trapping.展开更多
In-situ polymer electrolytes prepared by Li salt-initiated polymerization are promising electrolytes for solid-state Li metal batteries owing to their enhanced interface contact and facile and green preparation proces...In-situ polymer electrolytes prepared by Li salt-initiated polymerization are promising electrolytes for solid-state Li metal batteries owing to their enhanced interface contact and facile and green preparation process.However,conventional in-situ polymer electrolytes suffer from poor interface stability,low mechanical strength,low oxidation stability,and certain flammability.Herein,a silsesquioxane(POSS)-nanocage-crosslinked in-situ polymer electrolyte(POSS-DOL@PI-F)regulated by fluorinated plasticizer and enhanced by polyimide skeleton is fabricated by Li salt initiated in-situ polymerization.Polyimide skeleton and POSS-nanocage-crosslinked network significantly enhance the tensile strength(22.8 MPa)and thermal stability(200℃)of POSS-DOL@PI-F.Fluorinated plasticizer improves ionic conductivity(6.83×10^(-4)S cm^(-1)),flame retardance,and oxidation stability(5.0 V)of POSS-DOL@PI-F.The fluorinated plasticizer of POSS-DOL@PI-F constructs robust LiF-rich solid electrolyte interphases and cathode electrolyte interphases,thereby dramatically enhancing the interface stability of Li metal anodes and LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NCM811)cathodes.POSS-DOL@PI-F enables stable,long-term(1200 h),and dendrite-free cycle of Li‖Li cells.POSS-DOL@PI-F significantly boosts the performance of Li‖NCM811cells,which display superior cycle stability under harsh conditions of high voltage(4.5 V),high temperature(60℃),low temperature(-20℃),and high areal capacity.This work provides a rational design strategy for safe and efficient polymer electrolytes.展开更多
基金supported by the National Natural Science Foundation of China under Grant No. 60736029 and 30525030UESTC Youth Foundation under Grant No. L08010901JX0772 for support.
文摘In this paper, a new control system based on forearm electromyogram （EMG） is proposed for computer peripheral control and artificial prosthesis control. This control system intends to realize the commands of six pre-defined hand poses： up, down, left, right, yes, and no. In order to research the possibility of using a unified amplifier for both electroencephalogram （EEG） and EMG, the surface forearm EMG data is acquired by a 4-channel EEG measurement system. The Bayesian classifier is used to classify the power spectral density （PSD） of the signal. The experiment result verifies that this control system can supply a high command recognition rate （average 48%） even the EMG data is collected with an EEG system just with single electrode measurement.
基金financially supported by the National Natural Science Foundation of China(No.52377026 and No.52301192)Taishan Scholars and Young Experts Program of Shandong Province(No.tsqn202103057)+4 种基金Postdoctoral Fellowship Program of CPSF under Grant Number(No.GZB20240327)Shandong Postdoctoral Science Foundation(No.SDCXZG-202400275)Qingdao Postdoctoral Application Research Project(No.QDBSH20240102023)China Postdoctoral Science Foundation(No.2024M751563)the Qingchuang Talents Induction Program of Shandong Higher Education Institution(Research and Innovation Team of Structural-Functional Polymer Composites).
文摘Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly urgent.Multi-component interface engineering is considered an effective means to achieve high-efficiency EMW absorption.However,interface modulation engineering has not been fully discussed and has great potential in the field of EMW absorption.In this study,multi-component tin compound fiber composites based on carbon fiber(CF)substrate were prepared by electrospinning,hydrothermal synthesis,and high-temperature thermal reduction.By utilizing the different properties of different substances,rich heterogeneous interfaces are constructed.This effectively promotes charge transfer and enhances interfacial polarization and conduction loss.The prepared SnS/SnS_(2)/SnO_(2)/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt%in epoxy resin.The minimum reflection loss(RL)is−46.74 dB and the maximum effective absorption bandwidth is 5.28 GHz.Moreover,SnS/SnS_(2)/SnO_(2)/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel surfaces.Therefore,this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.
基金Funded by the Research Funds of China University of Mining and Technology(No.102523215)。
文摘The pre-wetting of aggregate surface is a means to improve the interface performance of SBS modified asphalt and aggregate.The effect of pre-wetting technology on the interaction between SBS modified asphalt and aggregate was analyzed by molecular dynamics simulation.The diffusion coefficient and concentration distribution of SBS modified asphalt on aggregate surface are included.The simulation results show that the diffusion coefficient of the aggregate surface of SBS modified asphalt is increased by 47.6%and 70.5%respectively after 110#asphalt and 130#asphalt are pre-wetted.The concentration distribution of SBS modified asphalt on the aggregate surface after pre-wetting is more uniform.According to the results of interface energy calculation,the interface energy of SBS modified bitumen and aggregate can be increased by about 5%after pre-wetting.According to the results of molecular dynamics simulation,the pre-wetting technology can effectively improve the interface workability of SBS modified bitumen and aggregate,so as to improve the interface performance.
基金the National High Technology Research and Development Program (863) of China(No. 2006AA02A137)
文摘In recent years, computer assisted surgery （CAS） systems become more and more common in clinical practices, but few specific design criteria have been proposed for human-computer interface （HCI） in GAS systems. This paper tried to give universal criteria of HCI design for CAS systems through introduction of demonstration application, which is total knee replacement （TKR） with a nonimage-based navigation system. A typical computer assisted process can be divided into four phases： the preoperative planning phase, the intraoperative registration phase, the intraoperative navigation phase and finally the postoperative assessment phase. The interface design for four steps is described respectively in the demonstration application. These criteria this paper summarized can be useful to software developers to achieve reliable and effective interfaces for new CAS systems more easily.
基金Funded by the National Natural Science Foundation of China(Nos.52075347,51575364)and the Natural Science Foundation of Liaoning Provincial(No.2022-MS-295)。
文摘In order to solve the problem of poor formability caused by different materials and properties in the process of tailor-welded sheets forming,a forming method was proposed to change the stress state of tailor-welded sheets by covering the tailor-welded sheets with better plastic properties overlapping sheets.At the same time,the interface friction effect between the overlapping and tailor-welded sheets was utilized to control the stress magnitude and further improve the formability and quality of the tailor-welded sheets.In this work,the bulging process of the tailor-welded overlapping sheets was taken as the research object.Aluminum alloy tailor-welded overlapping sheets bulging specimens were studied by a combination of finite element analysis and experimental verification.The results show that the appropriate use of interface friction between tailor-welded and overlapping sheets can improve the formability of tailor-welded sheets and control the flow of weld seam to improve the forming quality.When increasing the interface friction coefficient on the side of tailor-welded sheets with higher strength and decreasing that on the side of tailor-welded sheets with lower strength,the deformation of the tailor-welded sheets are more uniform,the offset of the weld seam is minimal,the limit bulging height is maximal,and the forming quality is optimal.
基金financially supported by the National Key R&D Program of China(No.2022YFE0121300)the National Natural Science Foundation of China(No.52374376)the Introduction Plan for High-end Foreign Experts(No.G2023105001L)。
文摘As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.
基金National Natural Science Foundation of China(32201491)Young Elite Scientists Sponsorship Program by CAST(2023QNRC001)The authors extend their appreciation to the Deanship of Scientific Research at Northern Border University,Arar,KSA for funding this research work through the project number“NBU-FPEJ-2024-1101-02”.
文摘Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.
文摘The rapid development of the information era has led to in-creased power consumption,which generates more heat.This requires more efficient thermal management systems,with the most direct ap-proach being the development of su-perior thermal interface materials(TIMs).Mesocarbon microbeads(MCMBs)have several desirable properties for this purpose,includ-ing high thermal conductivity and excellent thermal stability.Although their thermal conductivity(K)may not be exceptional among all carbon materials,their ease of production and low cost make them ideal filler materials for developing a new generation of carbon-based TIMs.We report the fabrication of high-performance TIMs by incorporating MCMBs in a polyimide(PI)framework,producing highly graphitized PI/MCMB(PM)foams and anisotropic polydimethylsiloxane/PM(PDMS/PM)composites with a high thermal conductivity using directional freezing and high-temperature thermal annealing.The resulting materials had a high through-plane(TP)K of 15.926 W·m^(−1)·K^(−1),4.83 times that of conventional thermally conductive silicone pads and 88.5 times higher than that of pure PDMS.The composites had excellent mechanical properties and thermal stability,meeting the de-mands of modern electronic products for integration,multi-functionality,and miniaturization.
基金supported by the Natural Science Foundation of Zhejiang Province(LZ22C130001)the National Natural Science Foundation of China(32171887,and 52002028,and 52192610)+1 种基金the National Key Research and Development Project from Minister of Science&Technology(2021YFA0202704)Beijing Municipal Science&Technology Commission(Z171100002017017).
文摘Efficient utilization of electrostatic charges is paramount for numerous applications,from printing to kinetic energy harvesting.However,existing technologies predominantly focus on the static qualities of these charges,neglecting their dynamic capabilities as carriers for energy conversion.Herein,we report a paradigm-shifting strategy that orchestrates the swift transit of surface charges,generated through contact electrification,via a freely moving droplet.This technique ingeniously creates a bespoke charged surface which,in tandem with a droplet acting as a transfer medium to the ground,facilitates targeted charge displacement and amplifies electrical energy collection.The spontaneously generated electric field between the charged surface and needle tip,along with the enhanced water ionization under the electric field,proves pivotal in facilitating controlled charge transfer.By coupling the effects of charge self-transfer,contact electrification,and electrostatic induction,a dual-electrode droplet-driven(DD)triboelectric nanogenerator(TENG)is designed to harvest the water-related energy,exhibiting a two-orderof-magnitude improvement in electrical output compared to traditional single-electrode systems.Our strategy establishes a fundamental groundwork for efficient water drop energy acquisition,offering deep insights and substantial utility for future interdisciplinary research and applications in energy science.
文摘Interface chemical modulation strategies are considered as promising method to prepare electrocatalysts for the urea oxidation reaction(UOR).However,conventional interface catalysts are generally limited by the inherent activity and incompatibility of the individual components themselves,and the irregular charge distribution and slow charge transfer ability between interfaces severely limit the activity of UOR.Therefore,we optimized and designed a Ni_(2)P/CoP interface with modulated surface charge distribution and directed charge transfer to promote UOR activity.Density functional theorycalculations first predict a regular charge transfer from CoP to Ni_(2)P,which creates a built-in electric field between Ni_(2)P and CoP interface.Optimization of the adsorption/desorption process of UOR/HER reaction intermediates leads to the improvement of catalytic activity.Electrochemical impedance spectroscopy and ex situ X-ray photoelectron spectroscopy characterization confirm the unique mechanism of facilitated reaction at the Ni_(2)P/CoP interface.Electrochemical tests further validated the prediction with excellent UOR/HER activities of 1.28 V and 19.7 mV vs.RHE,at 10 mA cm^(-2),respectively.Furthermore,Ni_(2)P/CoP achieves industrial-grade current densities(500 mA cm^(−2))at 1.75 V and 1.87 V in the overall urea electrolyzer(UOR||HER)and overall human urine electrolyzer(HUOR||HER),respectively,and demonstrates considerable durability.
基金supported by the Guangdong Province Science and Technology Plan Project 2023B1212120008Shenzhen Science and Technology Program JCYJ20220818101204010+1 种基金RGC Theme-based Research Scheme AoE/M-402/20Hong Kong Innovation and Technology Commission via the Hong Kong Branch of National Precious Metals Materials Engineering Research Center.
文摘Bionic interfaces exhibit multiscale features with various functions that reduce energy consumption and produce renewable resources to support life,triggering them an emerging area of technological revolution in many disciplines.To improve the design and fabrication flexibility,additive manufacturing(AM)technology has been attempted to achieve multiscale structures and reconstruct biological functions at interfaces.Emerging AM of bionic interfaces has led to substantial advancements in renewable energy applications in recent years,but some challenges remain to be overcome.This review first presents a basic understanding of bionic mechanisms and typical manufacturing techniques especially AM.Subsequently,it emphasizes the latest progress of the bionic interfaces and AM on various renewable energy applications,such as those for wetting-controlled surfaces,energy harvesting,water treatment,batteries,and catalysts.Finally,it discusses some challenges and provides insights on how bionic interfaces and AM provide innovative solutions for next-generation renewable energy applications.
基金supported by the Ministry of Education of the Russian Federation(Project No.1023032300071-6-2.3.1).
文摘An experimental investigation of the dynamics of the interface between two low-viscosity fluids with high density contrast oscillating in a fixed vertical slotted channel has been conducted.It has been found that as the amplitude of the liquid column oscillations increases,parametric oscillations of the interface are excited in the form of a standing wave located in the channel plane.In particular,depending on the interfacial tension,the standing waves have a frequency equal to that of liquid piston oscillations(harmonic response),or half of the frequency of oscillations of the liquid column in the channel(subharmonic response).The detected type of instability has a gravitational-capillary nature and is analogous to Faraday waves.The analysis of the overcritical dynamics of wave oscillations indicates that interfacial tension plays a crucial role in determining the type of parametric instability.At high interfacial tension,only synchronous(harmonic)wave modes are observed,and the threshold of the wave excitation is determined by the amplitude of piston oscillations of the liquid column.In this case,the oscillation acceleration does not play a role and has a small value in the threshold of the synchronous mode response.In the case of weak surface tension,subharmonic oscillations are observed.The threshold for the development of these oscillations is determined by the dimensionless acceleration of the oscillating liquid column and remains almost constant with variations in the dimensionless frequency of oscillations.At moderate values of interfacial tension(in the region of moderate dimensionless frequencies),a synchronous wave mode emerges in the stability threshold of the oscillating interface.As the dimensionless acceleration is increased further,a subharmonic mode is excited.The growth of subharmonic oscillations occurs against the background of harmonic wave oscillations,with the oscillations of the interface representing a combination of two standing waves.
文摘As one of the important components of high-effi-ciency perovskite/silicon series devices,wide-bandgap(WBG)perovskite solar cells(PSCs)have been suffering from serious carrier transport barriers and huge open-circuit voltage deficit de-rived from non-radiative recombination,especial-ly at the buried interface that are often overlooked.Herein,we combined cationic and anion passiva-tion strategies via ammonium tetra-n-butyl tetrafluoroborate(TBABF_(4))pre-treating the buried interface.Theoretical calculation predicts that the tetrabutylammonium(TBA^(+))organic cations and(tetrafluoroborate)BF_(4)^(−)anions can easily interact with charged interfacial defect.Characterizations further confirm the enhance-ment of carrier transport performance and decrease in defect density upon TBABF4 pre-treat-ment.Consequently,a power conversion efficiency of 21.35%with an ultrahigh filling factor of 84.12%is obtained for 1.68 eV-WBG inverted PSCs.In addition,the device with TBABF4 pre-treatment demonstrates excellent shelf,thermal,and operational stability.
基金the financial support from the National Natural Science Foundation of China (No.42102127)the Postdoctoral Research Foundation of China (No.2024 M751860)。
文摘Cleat serves as the primary flow pathway for coalbed methane(CBM)and water.However,few studies consider the impact of local contact on two-phase flow within cleats.A visual generalized model of endogenous cleats was constructed based on microfluidics.A microscopic and mesoscopic observation technique was proposed to simultaneously capture gas-liquid interface morphology of pores and throat and the two-phase flow characteristics in entire cleat system.The local contact characteristics of cleats reduced absolute permeability,which resulted in a sharp increase in the starting pressure.The reduced gas flow capacity narrowed the co-infiltration area and decreased water saturation at the isotonic point in a hydrophilic environment.The increased local contact area of cleats weakened gas phase flow capacity and narrowed the co-infiltration area.Jumping events occurred in methane-water flow due to altered porosity caused by local contact in cleats.The distribution of residual phases changed the jumping direction on the micro-scale as well as the dominant channel on the mesoscale.Besides,jumping events caused additional energy dissipation,which was ignored in traditional two-phase flow models.This might contribute to the overestimation of relative permeability.The work provides new methods and insights for investigating unsaturated flow in complex porous media.
基金the National Key R&D Plan of the Ministry of Science and Technology of China(2022YFE0122400)National Natural Science Foundation of China(52002238,22102207)+1 种基金Science and Technology Commission of Shanghai Municipality(22ZR1423800,21ZR1465200,23ZR1423600)Shanghai Municipal Education Commission and the NSRF via the Program Management Unit for Human Resources&Institutional Development,Research and Innovation(B49G680115).
文摘Silicon stands as a key anode material in lithium-ion battery ascribing to its high energy density.Nevertheless,the poor rate performance and limited cycling life remain unresolved through conventional approaches that involve carbon composites or nanostructures,primarily due to the un-controllable effects arising from the substantial formation of a solid electrolyte interphase(SEI)during the cycling.Here,an ultra-thin and homogeneous Ti doping alumina oxide catalytic interface is meticulously applied on the porous Si through a synergistic etching and hydrolysis process.This defect-rich oxide interface promotes a selective adsorption of fluoroethylene carbonate,leading to a catalytic reaction that can be aptly described as“molecular concentration-in situ conversion”.The resultant inorganic-rich SEI layer is electrochemical stable and favors ion-transport,particularly at high-rate cycling and high temperature.The robustly shielded porous Si,with a large surface area,achieves a high initial Coulombic efficiency of 84.7%and delivers exceptional high-rate performance at 25 A g^(−1)(692 mAh g^(−1))and a high Coulombic efficiency of 99.7%over 1000 cycles.The robust SEI constructed through a precious catalytic layer promises significant advantages for the fast development of silicon-based anode in fast-charging batteries.
基金sponsored by the National Natural Science Foundation of China(62121003,T2293730,T2293731,61960206012,62333020,and 62171434)the National Key Research and Development Program of China(2022YFC2402501 and 2022YFB3205602)the Major Program of Scientific and Technical Innovation 2030(2021ZD02016030)。
文摘Intracortical neural interfaces directly connect brain neurons with external devices to achieve high temporal resolution and spatially precise sampling of neural activity.When applied to freely moving animals,this technology provides in-depth insight into the underlying neural mechanisms for their movement and cognition in real-world scenarios.However,the application of implanted devices in freely moving animals is limited by restrictions on their behavioral freedom and physiologic impact.In this paper,four technological directions for ideal implantable neural interface devices are analyzed:higher spatial density,improved biocompatibility,enhanced multimodal detection of electrical/neurotransmitter signals,and more effective neural modulation.Finally,we discuss how these technological developments have been applied to freely moving animals to provide better insight into neuroscience and clinical medicine.
基金supported by the National Natural Science Foundation of China(Grant Nos.52102302,22409161 and 52472249)the Young Talent Support Plan of Xi’an Jiaotong University(Grant No.DQ6J011)+4 种基金the Natural Science Foundation of Shaanxi Province(2023-JC-QN-0115)the China Postdoctoral Science Foundation(2022M712499)Beilin District Science and Technology Plan(GX2328)the support from Young Elite Scientists Sponsorship Program by Chinese Association for Science and Technologythe“High-Level Talent Introduction Plan”of Shaanxi Province and Siyuan Scholar of Xi’an Jiaotong University。
文摘Global interest in lithium-sulfur batteries as one of the most promising energy storage technologies has been sparked by their low sulfur cathode cost,high gravimetric,volumetric energy densities,abundant resources,and environmental friendliness.However,their practical application is significantly impeded by several serious issues that arise at the cathode-electrolyte interface,such as interface structure degradation including the uneven deposition of Li_(2)S,unstable cathode-electrolyte interphase(CEI)layer and intermediate polysulfide shuttle effect.Thus,an optimized cathode-electrolyte interface along with optimized electrodes is required for overall improvement.Herein,we comprehensively outline the challenges and corresponding strategies,including electrolyte optimization to create a dense CEI layer,regulating the Li_(2)S deposition pattern,and inhibiting the shuttle effect with regard to the solid-liquid-solid pathway,the transformation from solid-liquid-solid to solid-solid pathway,and solid-solid pathway at the cathode-electrolyte interface.In order to spur more perceptive research and hasten the widespread use of lithium-sulfur batteries,viewpoints on designing a stable interface with a deep comprehension are also put forth.
基金supported by the National Key Research and Develop-ment Program of China(2019YFB1803400).
文摘1.Introduction Mobile communications have catalyzed a new era of informa-tion technology revolution,significantly broadening and deepen-ing human-to-human,human-to-machine,and machine-to-machine connections.With their incredible speed of development and wide-reaching impact,mobile communications serve as the cornerstone of the Internet of Everything,profoundly reshaping human cognitive abilities and ways of thinking.Furthermore,mobile communications are altering the patterns of production and life,driving leaps in productivity quality,and strongly promot-ing innovation within human civilization.
基金supported by the National Natural Science Foundation of China(Grant Nos.42172159 and 42302143)the Postdoctora Fellowship Program of the China Postdoctoral Science Foundation(CPSF)(Grant No.GZB20230864).
文摘Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interface dynamics influenced by complex topology commonly leads to non-wetting fluid trapping.Particularly,the underlying mechanisms under viscously unfavorable conditions remain unclear.This study employs a direct numerical simulation method to simulate forced imbibition through the reconstructed digital rocks of sandstone.The interface dynamics and fluid–fluid interactions are investigated through transient simulations,while the pore topology metrics are introduced to analyze the impact on steady-state residual fluid distribution obtained by a pseudo-transient scheme.The results show that the cooperative pore-filling process promoted by corner flow is dominant at low capillary numbers.This leads to unstable inlet pressure,mass flow,and interface curvature,which correspond to complicated interface dynamics and higher residual fluid saturation.During forced imbibition,the interface curvature gradually increases,with the pore-filling mechanisms involving the cooperation of main terminal meniscus movement and arc menisci filling.Complex topology with small diameter pores may result in the destabilization of interface curvature.The residual fluid saturation is negatively correlated with porosity and pore throat size,and positively correlated with tortuosity and aspect ratio.A large mean coordination number characterizing global connectivity promotes imbibition.However,high connectivity characterized by the standardized Euler number corresponding to small pores is associated with a high probability of non-wetting fluid trapping.
基金supported by the National Natural Science Foundation of China(22375116,22001057)the Science Foundation of High-Level Talents of Wuyi University(2019AL017,2021AL002)Tianjin Lishen Battery Co.,Ltd。
文摘In-situ polymer electrolytes prepared by Li salt-initiated polymerization are promising electrolytes for solid-state Li metal batteries owing to their enhanced interface contact and facile and green preparation process.However,conventional in-situ polymer electrolytes suffer from poor interface stability,low mechanical strength,low oxidation stability,and certain flammability.Herein,a silsesquioxane(POSS)-nanocage-crosslinked in-situ polymer electrolyte(POSS-DOL@PI-F)regulated by fluorinated plasticizer and enhanced by polyimide skeleton is fabricated by Li salt initiated in-situ polymerization.Polyimide skeleton and POSS-nanocage-crosslinked network significantly enhance the tensile strength(22.8 MPa)and thermal stability(200℃)of POSS-DOL@PI-F.Fluorinated plasticizer improves ionic conductivity(6.83×10^(-4)S cm^(-1)),flame retardance,and oxidation stability(5.0 V)of POSS-DOL@PI-F.The fluorinated plasticizer of POSS-DOL@PI-F constructs robust LiF-rich solid electrolyte interphases and cathode electrolyte interphases,thereby dramatically enhancing the interface stability of Li metal anodes and LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NCM811)cathodes.POSS-DOL@PI-F enables stable,long-term(1200 h),and dendrite-free cycle of Li‖Li cells.POSS-DOL@PI-F significantly boosts the performance of Li‖NCM811cells,which display superior cycle stability under harsh conditions of high voltage(4.5 V),high temperature(60℃),low temperature(-20℃),and high areal capacity.This work provides a rational design strategy for safe and efficient polymer electrolytes.
