A microelectronic circuit is used to regenerate the neural signals between the proximal end and the distal end of an injured nerve.An experimental scheme is designed and carried out to verify the feasibility of the so...A microelectronic circuit is used to regenerate the neural signals between the proximal end and the distal end of an injured nerve.An experimental scheme is designed and carried out to verify the feasibility of the so-called microelectronic neural bridge（MNB）.The sciatic signals of the source spinal toad which are evoked by chemical stimuli are used as source signals to stimulate the sciatic of the controlled spinal toad.The sciatic nerve signals of the source spinal toad,the regenerated sciatic signals in the controlled spinal toad,and the resulting electromyography（EMG）signals associated with the gastrocnemius muscle movements of the controlled spinal toad are displayed and recorded by an oscilloscope.By analyzing the coherence between the source sciatic nerve signals and the regenerated sciatic nerve signals and the coherence between the regenerated nerve signals and the EMG signals,it is proved that the regenerated sciatic nerve signals have a relationship with the source sciatic nerve signals and control shrinkage of the leg of the controlled toad.展开更多
Nerve tracts interruption is one of the major reasons for dysfunction after spiral cord injury. The microelectronic neural bridge is a method to restore function of interrupted neural pathways, by making use of microe...Nerve tracts interruption is one of the major reasons for dysfunction after spiral cord injury. The microelectronic neural bridge is a method to restore function of interrupted neural pathways, by making use of microelectronic chips to bypass the injured nerve tracts. A low-power fully integrated microelectronic neural bridge chip is designed, using CSMC 0.5-μm CMOS technology. The structure and the key points in the circuit design will be introduced in detail. In order to meet the requirement for implantation, the circuit was modified to avoid the use of off-chip components, and fully monolithic integration is achieved. The operating voltage of the circuit is 4-2.5 V, and the chip area is 1.21×1.18 mm2. According to the characteristic of neural signal, the time-domain method is used in testing. The pass bandwidth of the microelectronic neural bridge system covers the whole frequency range of the neural signal, power consumption is 4.33 mW, and the gain is adjustable. The design goals are achieved.展开更多
The present study used a microelectronic neural bridge comprised of electrode arrays for neural signal detection, functional electrical stimulation, and a microelectronic circuit including signal amplifying, processin...The present study used a microelectronic neural bridge comprised of electrode arrays for neural signal detection, functional electrical stimulation, and a microelectronic circuit including signal amplifying, processing, and functional electrical stimulation to bridge two separate nerves, and to restore the lost function of one nerve. The left leg of one spinal toad was subjected to external mechanical stimulation and functional electrical stimulation driving. The function of the left leg of one spinal toad was regenerated to the corresponding leg of another spinal toad using a microelectronic neural bridge. Oscilloscope tracings showed that the electromyographic signals from controlled spinal toads were generated by neural signals that controlled the spinal toad, and there was a delay between signals. This study demonstrates that microelectronic neural bridging can be used to restore neural function between different injured nerves.展开更多
基金The National Natural Science Foundation of China(No.90307013,90707005)the Natural Science Foundation of Jiangsu Province(No.BK2008032)+1 种基金Special Foundation and Open Foundation of State Key Laboratory of Bioelectronics of Southeast UniversityNantong Planning Project of Science and Technology(No.K2009037)
文摘A microelectronic circuit is used to regenerate the neural signals between the proximal end and the distal end of an injured nerve.An experimental scheme is designed and carried out to verify the feasibility of the so-called microelectronic neural bridge（MNB）.The sciatic signals of the source spinal toad which are evoked by chemical stimuli are used as source signals to stimulate the sciatic of the controlled spinal toad.The sciatic nerve signals of the source spinal toad,the regenerated sciatic signals in the controlled spinal toad,and the resulting electromyography（EMG）signals associated with the gastrocnemius muscle movements of the controlled spinal toad are displayed and recorded by an oscilloscope.By analyzing the coherence between the source sciatic nerve signals and the regenerated sciatic nerve signals and the coherence between the regenerated nerve signals and the EMG signals,it is proved that the regenerated sciatic nerve signals have a relationship with the source sciatic nerve signals and control shrinkage of the leg of the controlled toad.
基金Project supported by the National Natural Science Foundation of China(Nos.81371663,61204018)the Natural Science Foundation of Nantong University(No.13B06)
文摘Nerve tracts interruption is one of the major reasons for dysfunction after spiral cord injury. The microelectronic neural bridge is a method to restore function of interrupted neural pathways, by making use of microelectronic chips to bypass the injured nerve tracts. A low-power fully integrated microelectronic neural bridge chip is designed, using CSMC 0.5-μm CMOS technology. The structure and the key points in the circuit design will be introduced in detail. In order to meet the requirement for implantation, the circuit was modified to avoid the use of off-chip components, and fully monolithic integration is achieved. The operating voltage of the circuit is 4-2.5 V, and the chip area is 1.21×1.18 mm2. According to the characteristic of neural signal, the time-domain method is used in testing. The pass bandwidth of the microelectronic neural bridge system covers the whole frequency range of the neural signal, power consumption is 4.33 mW, and the gain is adjustable. The design goals are achieved.
基金supported by the National Natural Science Foundation of China,No,90707005,61001046 and 61204018the Natural Science Foundation of Education Department of Jiangsu Province,No.11KJB510023the Special Foundation and Open Foundation of State Key Laboratory of Bioelectronics of Southeast University,No.2011E05
文摘The present study used a microelectronic neural bridge comprised of electrode arrays for neural signal detection, functional electrical stimulation, and a microelectronic circuit including signal amplifying, processing, and functional electrical stimulation to bridge two separate nerves, and to restore the lost function of one nerve. The left leg of one spinal toad was subjected to external mechanical stimulation and functional electrical stimulation driving. The function of the left leg of one spinal toad was regenerated to the corresponding leg of another spinal toad using a microelectronic neural bridge. Oscilloscope tracings showed that the electromyographic signals from controlled spinal toads were generated by neural signals that controlled the spinal toad, and there was a delay between signals. This study demonstrates that microelectronic neural bridging can be used to restore neural function between different injured nerves.
