Nanocrystalline TiO2 was prepared by high frequency plasma chemical vapor deposition (HF-PCVD). The effects of additive AlCl3 on crystal phase, particle size and microstructurai parameters of TiO2 nanocrystallites wer...Nanocrystalline TiO2 was prepared by high frequency plasma chemical vapor deposition (HF-PCVD). The effects of additive AlCl3 on crystal phase, particle size and microstructurai parameters of TiO2 nanocrystallites were investigated by X-ray diffraction(XRD) and transmission electron microscopy (TEM). The nanocrystallites obtained experimentally are mixture of anatase and rutile, the uniform diameters of particles are about 30 nm. The phase transformation from anatase to rutile was accelerated by AlCl3, and rutile content is increased from 26.7 wt pct to 53.6 wt pct with increasing of addition of AlCl3 from 0.0 wt pct to 5.0 wt pct. The particle size is reduced and the size distribution becomes very narrow. The crystal lattice constants have the trend to decrease, and celi volumes appear as shrinkable.展开更多
Bused on the deformation model of dual phase steels, an expression for the stress of martensite in dual phase steels is derived, it predictes that the onset of plastic deformation of martensite (transition strain) dep...Bused on the deformation model of dual phase steels, an expression for the stress of martensite in dual phase steels is derived, it predictes that the onset of plastic deformation of martensite (transition strain) depends on the strain hardening of ferrite and on the strength of martensile. The relationship between the flow stress and microstructural parameters of a 0.12C-0.9Mn dual phase steel was investigated using the expression for the flow stress of dual phase steel[1] . By calculating the stress ratio and the stress-strain partition coefficient, the loud transition and the stress-strain partition between two phases are studied. It shows that the deformation of dual phase steel lies between the isostress and isostrain states and the stress-strain pratition changes continuously during the deloramtion.展开更多
During the cold-chamber high pressure die casting(HPDC) process, samples were produced to investigate the microstructure characteristics of AM60B magnesium alloy. Special attention was paid to the effects of process p...During the cold-chamber high pressure die casting(HPDC) process, samples were produced to investigate the microstructure characteristics of AM60B magnesium alloy. Special attention was paid to the effects of process parameters on the morphology and distribution of externally solidified crystals(ESCs) in the microstructure of magnesium alloy die castings, such as slow shot phase plunger velocity, delay time of pouring and fast shot phase plunger velocity. On the basis of metallographic observation and quantitative statistics, it is concluded that a lower slow shot phase plunger velocity and a longer delay time of pouring both lead to an increment of the size and percentage of the ESCs, due to the fact that a longer holding time of the melt in the shot sleeve will cause a more severe loss of the superheat. The impingement of the melt flow on the ESCs is more intensive with a higher fast shot phase plunger velocity, in such case the ESCs reveal a more granular and roundish morphology and are dispersed throughout the cross section of the castings. Based on analysis of the filling and solidification processes of the melt during the HPDC process, reasonable explanations were proposed in terms of the nucleation, growth, remelting and fragmentation of the ESCs to interpret the effects of process parameters on the morphology and distribution of the ESCs in the microstructure of magnesium alloy die castings.展开更多
The morphological changes in isolated bubbles in gassy silt play a critical role in the microscopic structures between soil particles and bubbles and macroscopic physical properties.Based on X-ray CT scanning experime...The morphological changes in isolated bubbles in gassy silt play a critical role in the microscopic structures between soil particles and bubbles and macroscopic physical properties.Based on X-ray CT scanning experiments under various vertical loads(four levels),self-designed acoustic macro experiments,and a series of formula revisions to the macro-air-bearing silt sound-velocity prediction model,this paper discusses the macro-and micro-scale features of gassy silts from the Yellow River Delta.The samples consisted of different proportions of silt from the Yellow River Delta and porous media,and they were used to form two types of aerosol silts with initial gas contents of 4.23%and 7.67%.The results show that the air bubble content and external load considerably affect the microstructural parameters and acoustic behavior of gassy silt in the Yellow River Delta.The macroscopic sound velocity showed a linear positive correlation with vertical load and relation to microstructural parameters in varying manners and degrees.Based on the traditional Biot-Stoll acoustic model,the gas-phase medium coefficient was introduced for the proper calculation and prediction of the sound velocity of air-bearing silt.The errors of the overall prediction varied between 5.6%and 9.6%.展开更多
The microscopic characterization of isolated bubbles in gassy soil plays an important role in the macroscopic physical properties of sediments and is a key factor in the study of geological hazards in gas-bearing stra...The microscopic characterization of isolated bubbles in gassy soil plays an important role in the macroscopic physical properties of sediments and is a key factor in the study of geological hazards in gas-bearing strata.Based on the box-counting method and the pore fractal features in porous media,a fractal model of bubble microstructure parameters in gassy soil under different gas con-tents and vertical load conditions is established by using an industrial X-ray CT scanning system.The results show that the fractal di-mension of bubbles in the sample is correlated with the volume fraction of bubbles,and it is also restricted by the vertical load.The three-dimensional fractal dimension of the sample is about 1 larger than the average two-dimensional fractal dimension of all the slices from the same sample.The uniform porous media fractal model is used to test the equivalent diameter,and the results show that the variation of the measured pore diameter ratio is jointly restricted by the volume fraction and the vertical load.In addition,the measured self-similarity interval of the bubble area distribution is tested by the porous media fractal capillary bundle model,and the fitting curve of measured pore area ratio in a small loading range is obtained in this paper.展开更多
The artificial neural network (ANN) and the pattern recognition were applied to study the correlation of enthalpies of fusion for divalent rare earth halides with their microstructural parameters,such as ionic radius ...The artificial neural network (ANN) and the pattern recognition were applied to study the correlation of enthalpies of fusion for divalent rare earth halides with their microstructural parameters,such as ionic radius and electronegativity. The model,represented by a back-propagation netal network, was trained with a 12 set of published data for divalent rare earth halides and then was used to predict the unknown ones. Also the criterion equations were ptesented to determine the enthalpies of fuSion for divalent rare earth halides using pattern recognition in mis work. The results from the model in ANN and criterion equations are in very good agreement with reference data.展开更多
Three different Ti-Si oxide structuares, silica supported titania, silica coated titania and intimately mixed silicatitania, containing 10%-40% SiO2, were made by sol-gel process. The variations of microstructure para...Three different Ti-Si oxide structuares, silica supported titania, silica coated titania and intimately mixed silicatitania, containing 10%-40% SiO2, were made by sol-gel process. The variations of microstructure parameters of nanocrystalline （nc） TiO2-anatase in the three kirds of binary oxides, including in-plane spacing d, cell constants （ao, co）, cell volume V, cell axial ratio co/ao and crystal grain size, were comparatively investigated by high resolution transmission electron microscopy （HRTEM） and X-ray diffraction （XRD）. It is found that the microstructure parameters vary remarkably with increasing SiO2 content and annealing temperature. Different structured Ti-Si binary oxides lead to different variation tendencies of microstructure parameters. The more SiO2 the binary oxide contains, the more lattice defects of nc TiO2-anatase appear; diffusion or migration of Si cations could be an important influential factor in the variations of microstructure. The grain size of nc TiO2 in the three kinds of binary oxides not only depends on SiO2 content and annealing temperature but also on the degree of lattice microstrain and distortion of nc TiO2-anatase. Both grain size and phase transformation of nc TiO2-anatase are effectively inhibited with increasing SiO2 content.展开更多
The effects of Sr addition and pressure increase on the microstructure and casting defects of a low-pressure die cast （LPDC） AISi7Mg0.3 alloy have been studied. Metallographic and image analysis techniques have been...The effects of Sr addition and pressure increase on the microstructure and casting defects of a low-pressure die cast （LPDC） AISi7Mg0.3 alloy have been studied. Metallographic and image analysis techniques have been used to quantitatively examine the microstructural changes and the amount of porosity occurring at different Sr levels and pressure parameters. The results indicate that an increase in the filling pressure induces lower heat dissipation of the liquid close to the die/core surfaces, with the formation of slightly greater dendrite arms and coarser eutectic Si particles. On the other hand, the increase in the Sr level leads to finer microstructural scale and eutectic Si. The analysed variables, within the experimental conditions, do not affect the morphology of eutectic Si particles. Higher applied pressure and Sr content generate castings with lower amount of porosiW. However, as the filling pressure increases the flow of metal inside the die cavity is more turbulent, leading to the formation of oxide films and cold shots. In the analysed range of experimental conditions, the design of experiment methodology and the analysis of variance have been used to develop statistical models that accurately predict the average size of secondary dendrite arm spacing and the amount of porosity in the low-pressure die cast AISiTMg0.3 alloy.展开更多
Intermetallic Ti-xAl-8Nb（x = 41,43,45,47,49;at%） alloys were solidified unidirectionally upwards with a constant temperature gradient of G=3.8 K·mm^（-1）at wide range of growth rates of v=10-400 μm·s^（-...Intermetallic Ti-xAl-8Nb（x = 41,43,45,47,49;at%） alloys were solidified unidirectionally upwards with a constant temperature gradient of G=3.8 K·mm^（-1）at wide range of growth rates of v=10-400 μm·s^（-1）using a Bridgman directional solidification（DS） furnace.Microstructural parameters including the primary dendrite arm spacing（λ_1）,secondary dendrite arm spacing（λ_2）,dendrite tip radius（R） and mushy zone depth（d） were measured statistically.The values of λ_1,λ_2,R and d decrease as the growth rate increases for a given composition（x）.The values of λ_1,λ_2,R and v increase with the increase in x value,while the value of d firstly increases and then decreases with the increase in x value for a given v.The relationships between λ_1,λ_2 and R were analyzed by the linear regression.The average growth rate exponent of λ_1 is 0.29,which is in accordance with the previous experimental observations,and that of λ_2 is close to the previous experimental results,while those of R and d are lower than the results in other alloy systems.In addition,theoretical models for λ_1,λ_2 and R were compared with the experimental observations,and a comparison of the present experimental results with the theoretical models and previous experimental results was also made.展开更多
Gas-solid fluidized beds are widely applied in chemical and process engineering.It is of significance to establish a reasonable and effective mathematical model to explore the hydrodynamics of gas-particle system for ...Gas-solid fluidized beds are widely applied in chemical and process engineering.It is of significance to establish a reasonable and effective mathematical model to explore the hydrodynamics of gas-particle system for industrial applications.As a less computationally demanding alternative to the discrete descriptions,two-fluid model considering kinetic theory of granular flow is often adopted to describe the fluidized behaviors of particles,but it cannot characterize the rotation of particles and its influence on the fluidized behaviors.In this study,to address the rotation effect of the fluidized particles,a two-fluid model combining the classical fluid and micropolar fluid is established,namely CMTFM.In the CMTFM,classical fluid is used to describe the motion of gas phase,while micropolar fluid is adopted to describe the motion of particle phase,and the rotation of particles and its influence on the hydrodynamics of the gas-particle system are characterized by the degree of freedom of microrotation and the improved drag force based on micropolar viscosities.In the calculation of the gas-solid bubbling fluidized bed,we investigated the influence of the microstructure parameters,particle-particle collision restitution coefficient and inlet velocity,and the results are compared to those from TFM model and experiments.Through the analysis,it manifests that pressure drop and expansion height of the fluidized bed under the consideration of the microrotation effect are closer to the experiments,which demonstrates the feasibility and advantage of the classical-micropolar two-fluid model.展开更多
文摘Nanocrystalline TiO2 was prepared by high frequency plasma chemical vapor deposition (HF-PCVD). The effects of additive AlCl3 on crystal phase, particle size and microstructurai parameters of TiO2 nanocrystallites were investigated by X-ray diffraction(XRD) and transmission electron microscopy (TEM). The nanocrystallites obtained experimentally are mixture of anatase and rutile, the uniform diameters of particles are about 30 nm. The phase transformation from anatase to rutile was accelerated by AlCl3, and rutile content is increased from 26.7 wt pct to 53.6 wt pct with increasing of addition of AlCl3 from 0.0 wt pct to 5.0 wt pct. The particle size is reduced and the size distribution becomes very narrow. The crystal lattice constants have the trend to decrease, and celi volumes appear as shrinkable.
文摘Bused on the deformation model of dual phase steels, an expression for the stress of martensite in dual phase steels is derived, it predictes that the onset of plastic deformation of martensite (transition strain) depends on the strain hardening of ferrite and on the strength of martensile. The relationship between the flow stress and microstructural parameters of a 0.12C-0.9Mn dual phase steel was investigated using the expression for the flow stress of dual phase steel[1] . By calculating the stress ratio and the stress-strain partition coefficient, the loud transition and the stress-strain partition between two phases are studied. It shows that the deformation of dual phase steel lies between the isostress and isostrain states and the stress-strain pratition changes continuously during the deloramtion.
基金financially supported by the Fundamental Research Funds for the Central Universities(WUT:2017IVA036)111 Project(B17034)State Key Laboratory of Materials Processing and Die&Mould Technology,Huazhong University of Science and Technology(P2018-003)
文摘During the cold-chamber high pressure die casting(HPDC) process, samples were produced to investigate the microstructure characteristics of AM60B magnesium alloy. Special attention was paid to the effects of process parameters on the morphology and distribution of externally solidified crystals(ESCs) in the microstructure of magnesium alloy die castings, such as slow shot phase plunger velocity, delay time of pouring and fast shot phase plunger velocity. On the basis of metallographic observation and quantitative statistics, it is concluded that a lower slow shot phase plunger velocity and a longer delay time of pouring both lead to an increment of the size and percentage of the ESCs, due to the fact that a longer holding time of the melt in the shot sleeve will cause a more severe loss of the superheat. The impingement of the melt flow on the ESCs is more intensive with a higher fast shot phase plunger velocity, in such case the ESCs reveal a more granular and roundish morphology and are dispersed throughout the cross section of the castings. Based on analysis of the filling and solidification processes of the melt during the HPDC process, reasonable explanations were proposed in terms of the nucleation, growth, remelting and fragmentation of the ESCs to interpret the effects of process parameters on the morphology and distribution of the ESCs in the microstructure of magnesium alloy die castings.
基金supported by the National Natural Science Foundation of China(No.U2006213)the China Post doctoral Science Foundation(No.2022M712989).
文摘The morphological changes in isolated bubbles in gassy silt play a critical role in the microscopic structures between soil particles and bubbles and macroscopic physical properties.Based on X-ray CT scanning experiments under various vertical loads(four levels),self-designed acoustic macro experiments,and a series of formula revisions to the macro-air-bearing silt sound-velocity prediction model,this paper discusses the macro-and micro-scale features of gassy silts from the Yellow River Delta.The samples consisted of different proportions of silt from the Yellow River Delta and porous media,and they were used to form two types of aerosol silts with initial gas contents of 4.23%and 7.67%.The results show that the air bubble content and external load considerably affect the microstructural parameters and acoustic behavior of gassy silt in the Yellow River Delta.The macroscopic sound velocity showed a linear positive correlation with vertical load and relation to microstructural parameters in varying manners and degrees.Based on the traditional Biot-Stoll acoustic model,the gas-phase medium coefficient was introduced for the proper calculation and prediction of the sound velocity of air-bearing silt.The errors of the overall prediction varied between 5.6%and 9.6%.
基金supported by the Open Research Fund Program of State Key Laboratory of Hydroscience and Engineering(No.sk lhse-2022-D-03)the National Natural Science Foundation of China(Nos.U2006213,42277139)the Taishan Scholars Program(No.tsqn202306297).
文摘The microscopic characterization of isolated bubbles in gassy soil plays an important role in the macroscopic physical properties of sediments and is a key factor in the study of geological hazards in gas-bearing strata.Based on the box-counting method and the pore fractal features in porous media,a fractal model of bubble microstructure parameters in gassy soil under different gas con-tents and vertical load conditions is established by using an industrial X-ray CT scanning system.The results show that the fractal di-mension of bubbles in the sample is correlated with the volume fraction of bubbles,and it is also restricted by the vertical load.The three-dimensional fractal dimension of the sample is about 1 larger than the average two-dimensional fractal dimension of all the slices from the same sample.The uniform porous media fractal model is used to test the equivalent diameter,and the results show that the variation of the measured pore diameter ratio is jointly restricted by the volume fraction and the vertical load.In addition,the measured self-similarity interval of the bubble area distribution is tested by the porous media fractal capillary bundle model,and the fitting curve of measured pore area ratio in a small loading range is obtained in this paper.
文摘The artificial neural network (ANN) and the pattern recognition were applied to study the correlation of enthalpies of fusion for divalent rare earth halides with their microstructural parameters,such as ionic radius and electronegativity. The model,represented by a back-propagation netal network, was trained with a 12 set of published data for divalent rare earth halides and then was used to predict the unknown ones. Also the criterion equations were ptesented to determine the enthalpies of fuSion for divalent rare earth halides using pattern recognition in mis work. The results from the model in ANN and criterion equations are in very good agreement with reference data.
基金the National Natural Science Foundation of China under grant No. 20476067 Key Project of the National Natural Science Foundation of China, No. 90306014.
文摘Three different Ti-Si oxide structuares, silica supported titania, silica coated titania and intimately mixed silicatitania, containing 10%-40% SiO2, were made by sol-gel process. The variations of microstructure parameters of nanocrystalline （nc） TiO2-anatase in the three kirds of binary oxides, including in-plane spacing d, cell constants （ao, co）, cell volume V, cell axial ratio co/ao and crystal grain size, were comparatively investigated by high resolution transmission electron microscopy （HRTEM） and X-ray diffraction （XRD）. It is found that the microstructure parameters vary remarkably with increasing SiO2 content and annealing temperature. Different structured Ti-Si binary oxides lead to different variation tendencies of microstructure parameters. The more SiO2 the binary oxide contains, the more lattice defects of nc TiO2-anatase appear; diffusion or migration of Si cations could be an important influential factor in the variations of microstructure. The grain size of nc TiO2 in the three kinds of binary oxides not only depends on SiO2 content and annealing temperature but also on the degree of lattice microstrain and distortion of nc TiO2-anatase. Both grain size and phase transformation of nc TiO2-anatase are effectively inhibited with increasing SiO2 content.
文摘The effects of Sr addition and pressure increase on the microstructure and casting defects of a low-pressure die cast （LPDC） AISi7Mg0.3 alloy have been studied. Metallographic and image analysis techniques have been used to quantitatively examine the microstructural changes and the amount of porosity occurring at different Sr levels and pressure parameters. The results indicate that an increase in the filling pressure induces lower heat dissipation of the liquid close to the die/core surfaces, with the formation of slightly greater dendrite arms and coarser eutectic Si particles. On the other hand, the increase in the Sr level leads to finer microstructural scale and eutectic Si. The analysed variables, within the experimental conditions, do not affect the morphology of eutectic Si particles. Higher applied pressure and Sr content generate castings with lower amount of porosiW. However, as the filling pressure increases the flow of metal inside the die cavity is more turbulent, leading to the formation of oxide films and cold shots. In the analysed range of experimental conditions, the design of experiment methodology and the analysis of variance have been used to develop statistical models that accurately predict the average size of secondary dendrite arm spacing and the amount of porosity in the low-pressure die cast AISiTMg0.3 alloy.
基金financially supported by the National Natural Science Foundation of China(Nos.51271016 and U1204508)the National Basic Research Program of China(No.2011CB605500)+1 种基金the Doctoral Program of Higher Education of China(No.20120006120042)the Fundamental Research Funds for the Central Universities(No.FRF-TP-14-062A2)
文摘Intermetallic Ti-xAl-8Nb（x = 41,43,45,47,49;at%） alloys were solidified unidirectionally upwards with a constant temperature gradient of G=3.8 K·mm^（-1）at wide range of growth rates of v=10-400 μm·s^（-1）using a Bridgman directional solidification（DS） furnace.Microstructural parameters including the primary dendrite arm spacing（λ_1）,secondary dendrite arm spacing（λ_2）,dendrite tip radius（R） and mushy zone depth（d） were measured statistically.The values of λ_1,λ_2,R and d decrease as the growth rate increases for a given composition（x）.The values of λ_1,λ_2,R and v increase with the increase in x value,while the value of d firstly increases and then decreases with the increase in x value for a given v.The relationships between λ_1,λ_2 and R were analyzed by the linear regression.The average growth rate exponent of λ_1 is 0.29,which is in accordance with the previous experimental observations,and that of λ_2 is close to the previous experimental results,while those of R and d are lower than the results in other alloy systems.In addition,theoretical models for λ_1,λ_2 and R were compared with the experimental observations,and a comparison of the present experimental results with the theoretical models and previous experimental results was also made.
基金supported by the National Natural Science Foundation of China(Grant No.12172263 and 11772237)。
文摘Gas-solid fluidized beds are widely applied in chemical and process engineering.It is of significance to establish a reasonable and effective mathematical model to explore the hydrodynamics of gas-particle system for industrial applications.As a less computationally demanding alternative to the discrete descriptions,two-fluid model considering kinetic theory of granular flow is often adopted to describe the fluidized behaviors of particles,but it cannot characterize the rotation of particles and its influence on the fluidized behaviors.In this study,to address the rotation effect of the fluidized particles,a two-fluid model combining the classical fluid and micropolar fluid is established,namely CMTFM.In the CMTFM,classical fluid is used to describe the motion of gas phase,while micropolar fluid is adopted to describe the motion of particle phase,and the rotation of particles and its influence on the hydrodynamics of the gas-particle system are characterized by the degree of freedom of microrotation and the improved drag force based on micropolar viscosities.In the calculation of the gas-solid bubbling fluidized bed,we investigated the influence of the microstructure parameters,particle-particle collision restitution coefficient and inlet velocity,and the results are compared to those from TFM model and experiments.Through the analysis,it manifests that pressure drop and expansion height of the fluidized bed under the consideration of the microrotation effect are closer to the experiments,which demonstrates the feasibility and advantage of the classical-micropolar two-fluid model.
