In order to improve the real-time performance of the real-time HLA(high level architecture) in the application of massive data communication volume,multi-thread processing was adopted,thread pool structure was introdu...In order to improve the real-time performance of the real-time HLA(high level architecture) in the application of massive data communication volume,multi-thread processing was adopted,thread pool structure was introduced into the system,different threads to handle corresponding message queues was utilized to respond different message requests.Furthermore,an allocation strategy of semi-complete deprivation of priority was adopted,which reduces thread switching cost and processing burden in the system,provided that the message requests with high priority can be responded in time,thus improves the system's overall performance.The design and experiment results indicate that the method proposed in this paper can improve the real-time performance of HLA in distributed system applications greatly.展开更多
This article describes three algorithms for distance field generation on triangulated model: brute force algorithm, single-threaded algorithm based on spatial partition and multi-threaded algorithm based on spatial pa...This article describes three algorithms for distance field generation on triangulated model: brute force algorithm, single-threaded algorithm based on spatial partition and multi-threaded algorithm based on spatial partition. Spatial partition algorithm use equidistant network divide the bounding box into equal-sized cubes, calculates the maximum and minimum distances between the sample point and each of the small cubes,taking the minimum value from the maximum distance as the minimum distance from the sample point to the model named d1, comparing d1 with the distance from sample point to every little cube's minimum distance d2, if d1 <d2, the sample point's distance to all triangles inside this cube are greater than d1, skip this cube, otherwise, calculated the distance from the point to all the triangles intersect with the cube, then alternative d1 with the minimum value, circulate all small cubes intersect with the model. Comparing the calculation results, it can be seen that the algorithm about the multi-threaded distance field relative to the other two algorithms in computational speed is greatly improved especially for complex models.展开更多
mc211vm is a process-level ARM-to-x86 binary translator developed in our lab in the past several years. Currently, it is able to emulate singlethreaded programs. We extend mc211vm to emulate multi-threaded programs. O...mc211vm is a process-level ARM-to-x86 binary translator developed in our lab in the past several years. Currently, it is able to emulate singlethreaded programs. We extend mc211vm to emulate multi-threaded programs. Our main task is to reconstruct its architecture for multi-threaded programs. Register mapping, code cache management, and address mapping in mc2llvm have all been modified. In addition, to further speed up the emulation, we collect hot paths, aggressively optimize and generate code for them at run time. Additional threads are used to alleviate the overhead. Thus, when the same hot path is walked through again, the corresponding optimized native code will be executed instead. In our experiments, our system is 8.8X faster than QEMU （quick emulator） on average when emulating the specified benchmarks with 8 guest threads.展开更多
In order to realize the efficiency, reliability and safety tests on the complex cable network of an electronic system, an efficient cable network resistance tester is designed. Firstly, the design background and hardw...In order to realize the efficiency, reliability and safety tests on the complex cable network of an electronic system, an efficient cable network resistance tester is designed. Firstly, the design background and hardware structure are briefly described. Then aiming at the multi task parallelism considering real time measurement of parameters and real time control of the system in the tester testing, a real time muhi task control software is developed by using multi thread testing technology in parallel test to realize multi task complex control. Finally, the least squares method is used to improve the test accuracyof the tester. The test results show that the test error is basically within 0.3%, and the test speed can reach 345 point/min.展开更多
In the video-based surveillance application, moving shadows can affect the correct localization and detection of moving objects. This paper aims to present a method for shadow detection and suppression used for moving...In the video-based surveillance application, moving shadows can affect the correct localization and detection of moving objects. This paper aims to present a method for shadow detection and suppression used for moving visual object detection. The major novelty of the shadow suppression is the integration of several features including photometric invariant color feature, motion edge feature, and spatial feature etc. By modifying process for false shadow detected, the averaging detection rate of moving object reaches above 90% in the test of Hall-Monitor sequence.展开更多
The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST, also called the Guo Shou Jing Telescope) is a special reflecting Schmidt telescope. LAMOST’s special design allows both a large aperture (effecti...The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST, also called the Guo Shou Jing Telescope) is a special reflecting Schmidt telescope. LAMOST’s special design allows both a large aperture (effective aperture of 3.6 m–4.9 m) and a wide field of view (FOV) (5°). It has an innovative active reflecting Schmidt configuration which continuously changes the mirror’s surface that adjusts during the observation process and combines thin deformable mirror active optics with segmented active optics. Its primary mirror (6.67m×6.05 m) and active Schmidt mirror (5.74m×4.40 m) are both segmented, and composed of 37 and 24 hexagonal sub-mirrors respectively. By using a parallel controllable fiber positioning technique, the focal surface of 1.75 m in diameter can accommodate 4000 optical fibers. Also, LAMOST has 16 spectrographs with 32 CCD cameras. LAMOST will be the telescope with the highest rate of spectral acquisition. As a national large scientific project, the LAMOST project was formally proposed in 1996, and approved by the Chinese government in 1997. The construction started in 2001, was completed in 2008 and passed the official acceptance in June 2009. The LAMOST pilot survey was started in October 2011 and the spectroscopic survey will launch in September 2012. Up to now, LAMOST has released more than 480 000 spectra of objects. LAMOST will make an important contribution to the study of the large-scale structure of the Universe, structure and evolution of the Galaxy, and cross-identification of multiwaveband properties in celestial objects.展开更多
Objective To compare the acute hemodynamic effects of five different pacing modes in patients with cardiac function NYHA class Ⅰ to Ⅱ without bundle branch block (BBB). Methods This study included 12 patients (SSS ...Objective To compare the acute hemodynamic effects of five different pacing modes in patients with cardiac function NYHA class Ⅰ to Ⅱ without bundle branch block (BBB). Methods This study included 12 patients (SSS 7, Ⅲ°AVB 5) undergoing pacemaker implantation. Right ventricular apex (RVA), right ventricular outflow tract (RVOT), right ventricular bifocal (RV-Bi), left ventricular base (LVB) and bi -ventricular (Bi-Ⅴ) pacing at 60 -80 ppm were done in VVI mode prior to implantation of DDD pacemaker. The cardiac index (CI), mean pulmonary artery pressure (mPAP) and pulmonary capillary wedge pressure (PCWP) were measured with Swan - Ganz thermodilution catheter after 5 minutes of each pacing mode. Results (1) Comparing to pacing at RVA (CI: 2. 41± 0. 38 L/min per m2, PCWP: 16. 7 ±3.3 mmHg), the CI increased and the PCWP decreased significantly in pacing at RVOT(CI: 2. 63 ± 0.46, PCWP: 13. 8±2. 3), LVB(CI: 2. 78±0.52, PCWP: 14. 4±3.1), RV-Bi(CI: 2. 83±0.57, PCWP: 12. 8± 2. 5) and Bi -Ⅴ pacing (CI: 2. 94± 0.60, PCWP: 12. 7±2. 5), P < 0. 01, respectively. (2) The CI of RV-Bi and Bi-Ⅴ pacing was higher than that of RVOT and LVB pacing, the PCWP was lower, P < 0. 05, respectively. (3) There was no significant difference between RV - Bi pacing and Bi-Ⅴ pacing in CI and PCWP. Conclusion There is no significant difference between RV - Bi pacing and Bi -V pacing in the acute hemodynamic effects; however,dual - site pacing is much better than single site pacing in that aspect for patients with cardiac function NYHA class Ⅰ to Ⅱ without BBB. Among single site pacing, the RVOT and LVB pacing is better than RVA pacing in cardiac function.展开更多
In this paper, a successfully studied and developed master - slave muld - microcomputers control system based on PC - BUS for hollow spindle fancy yarn spinning machine, mainly Its overall scheme, software and hardwar...In this paper, a successfully studied and developed master - slave muld - microcomputers control system based on PC - BUS for hollow spindle fancy yarn spinning machine, mainly Its overall scheme, software and hardware construction, is introduced. Spinning experiments show that the system achieves satisfactory result. This system can solve the diftkultles of mechatronical fusion between domestic hollow splndk fancy yarn spuming muchine and its microcomputer control technology.展开更多
A quantitative method is developed to identify the structures of multi-layer woven fabric in this study. Six structural parameters are selected to represent the fabric structure. With some design criteria for the rein...A quantitative method is developed to identify the structures of multi-layer woven fabric in this study. Six structural parameters are selected to represent the fabric structure. With some design criteria for the reinforcement of textile composites, the relationships among the structural parameters are derived for different binding patterns of the fabric structure. The conditions, which meet the requirements of structural cell stability,are also discussed.展开更多
To meet the development trend of multi-bar warp knit-ting machine towards high-speed,advanced technologyand computer control and the requirements of variousproducts with small quantity,there are many researcheson the ...To meet the development trend of multi-bar warp knit-ting machine towards high-speed,advanced technologyand computer control and the requirements of variousproducts with small quantity,there are many researcheson the computer-aided pattern design of multi-barwarp knitted fabrics.In terms of the special propertiesof the computer-aided pattern design of multi-barwarp knitted fabrics,the Object Oriented Program(OOP)programming-Object Windows class Library(OWL)programming is selected.According to thecharacters of the OWL programming,various functionsare defined.Pattern design and technical parameters canbe output,which offers a great convenience for the fac-tory.展开更多
This paper states a new metaheuristic based on Deterministic Finite Automata （DFA） for the multi - objective optimization of combinatorial problems. First, a new DFA named Multi - Objective Deterministic Finite Auto...This paper states a new metaheuristic based on Deterministic Finite Automata （DFA） for the multi - objective optimization of combinatorial problems. First, a new DFA named Multi - Objective Deterministic Finite Automata （MDFA） is defined. MDFA allows the representation of the feasible solutions space of combinatorial problems. Second, it is defined and implemented a metaheuritic based on MDFA theory. It is named Metaheuristic of Deterministic Swapping （MODS）. MODS is a local search strategy that works using a MDFA. Due to this, MODS never take into account unfeasible solutions. Hence, it is not necessary to verify the problem constraints for a new solution found. Lastly, MODS is tested using well know instances of the Bi-Objective Traveling Salesman Problem （TSP） from TSPLIB. Its results were compared with eight Ant Colony inspired algorithms and two Genetic algorithms taken from the specialized literature. The comparison was made using metrics such as Spacing, Generational Distance, Inverse Generational Distance and No-Dominated Generation Vectors. In every case, the MODS results on the metrics were always better and in some of those cases, the superiority was 100%.展开更多
Worst-case execution time (WCET) analysis of multi-threaded software is still a challenge. This comes mainly from the fact that synchronization has to be taken into account. In this paper, we focus on this issue and o...Worst-case execution time (WCET) analysis of multi-threaded software is still a challenge. This comes mainly from the fact that synchronization has to be taken into account. In this paper, we focus on this issue and on automatically calculating and incorporating stalling times (e.g. caused by lock contention) in a generic graph model. The idea that thread interleavings can be studied with a matrix calculus is novel in this research area. Our sparse matrix representations of the program are manipulated using an extended Kronecker algebra. The resulting graph represents multi-threaded programs similar as CFGs do for sequential programs. With this graph model, we are able to calculate the WCET of multi-threaded concurrent programs including stalling times which are due to synchronization. We employ a generating function-based approach for setting up data flow equations which are solved by well-known elimination-based dataflow analysis methods or an off-the-shelf equation solver. The WCET of multi-threaded programs can finally be calculated with a non-linear function solver.展开更多
设计并搭建了制冷量为3 k W、以R124-DMAC为工质、采用电热高温空气模拟发动机排气废热的空冷鼓泡吸收制冷实验系统,通过改变热空气进口温度、冷冻水温度和浓溶泵流率测试系统工作参数的变化趋势。实验结果表明,当发生器稀溶液出口温度...设计并搭建了制冷量为3 k W、以R124-DMAC为工质、采用电热高温空气模拟发动机排气废热的空冷鼓泡吸收制冷实验系统,通过改变热空气进口温度、冷冻水温度和浓溶泵流率测试系统工作参数的变化趋势。实验结果表明,当发生器稀溶液出口温度约为100℃时,蒸发温度为-4℃,系统COP值最大可达到约0.54,而且实验系统稳定性较好;影响系统制冷量和COP值的主要参数是热空气进口温度和冷冻水温度;当蒸发温度低于5℃时,为了提高制冷效果需考虑设置精馏装置。展开更多
基金Sponsored by the National Defence SciTech Key Lab Fundation(51457040204BQ0102)
文摘In order to improve the real-time performance of the real-time HLA(high level architecture) in the application of massive data communication volume,multi-thread processing was adopted,thread pool structure was introduced into the system,different threads to handle corresponding message queues was utilized to respond different message requests.Furthermore,an allocation strategy of semi-complete deprivation of priority was adopted,which reduces thread switching cost and processing burden in the system,provided that the message requests with high priority can be responded in time,thus improves the system's overall performance.The design and experiment results indicate that the method proposed in this paper can improve the real-time performance of HLA in distributed system applications greatly.
文摘This article describes three algorithms for distance field generation on triangulated model: brute force algorithm, single-threaded algorithm based on spatial partition and multi-threaded algorithm based on spatial partition. Spatial partition algorithm use equidistant network divide the bounding box into equal-sized cubes, calculates the maximum and minimum distances between the sample point and each of the small cubes,taking the minimum value from the maximum distance as the minimum distance from the sample point to the model named d1, comparing d1 with the distance from sample point to every little cube's minimum distance d2, if d1 <d2, the sample point's distance to all triangles inside this cube are greater than d1, skip this cube, otherwise, calculated the distance from the point to all the triangles intersect with the cube, then alternative d1 with the minimum value, circulate all small cubes intersect with the model. Comparing the calculation results, it can be seen that the algorithm about the multi-threaded distance field relative to the other two algorithms in computational speed is greatly improved especially for complex models.
基金supported by NSC under Grant No.NSC 100-2218-E-009-009MY3 and NSC 100-2218-E-009-010-MY3
文摘mc211vm is a process-level ARM-to-x86 binary translator developed in our lab in the past several years. Currently, it is able to emulate singlethreaded programs. We extend mc211vm to emulate multi-threaded programs. Our main task is to reconstruct its architecture for multi-threaded programs. Register mapping, code cache management, and address mapping in mc2llvm have all been modified. In addition, to further speed up the emulation, we collect hot paths, aggressively optimize and generate code for them at run time. Additional threads are used to alleviate the overhead. Thus, when the same hot path is walked through again, the corresponding optimized native code will be executed instead. In our experiments, our system is 8.8X faster than QEMU （quick emulator） on average when emulating the specified benchmarks with 8 guest threads.
文摘In order to realize the efficiency, reliability and safety tests on the complex cable network of an electronic system, an efficient cable network resistance tester is designed. Firstly, the design background and hardware structure are briefly described. Then aiming at the multi task parallelism considering real time measurement of parameters and real time control of the system in the tester testing, a real time muhi task control software is developed by using multi thread testing technology in parallel test to realize multi task complex control. Finally, the least squares method is used to improve the test accuracyof the tester. The test results show that the test error is basically within 0.3%, and the test speed can reach 345 point/min.
文摘In the video-based surveillance application, moving shadows can affect the correct localization and detection of moving objects. This paper aims to present a method for shadow detection and suppression used for moving visual object detection. The major novelty of the shadow suppression is the integration of several features including photometric invariant color feature, motion edge feature, and spatial feature etc. By modifying process for false shadow detected, the averaging detection rate of moving object reaches above 90% in the test of Hall-Monitor sequence.
文摘The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST, also called the Guo Shou Jing Telescope) is a special reflecting Schmidt telescope. LAMOST’s special design allows both a large aperture (effective aperture of 3.6 m–4.9 m) and a wide field of view (FOV) (5°). It has an innovative active reflecting Schmidt configuration which continuously changes the mirror’s surface that adjusts during the observation process and combines thin deformable mirror active optics with segmented active optics. Its primary mirror (6.67m×6.05 m) and active Schmidt mirror (5.74m×4.40 m) are both segmented, and composed of 37 and 24 hexagonal sub-mirrors respectively. By using a parallel controllable fiber positioning technique, the focal surface of 1.75 m in diameter can accommodate 4000 optical fibers. Also, LAMOST has 16 spectrographs with 32 CCD cameras. LAMOST will be the telescope with the highest rate of spectral acquisition. As a national large scientific project, the LAMOST project was formally proposed in 1996, and approved by the Chinese government in 1997. The construction started in 2001, was completed in 2008 and passed the official acceptance in June 2009. The LAMOST pilot survey was started in October 2011 and the spectroscopic survey will launch in September 2012. Up to now, LAMOST has released more than 480 000 spectra of objects. LAMOST will make an important contribution to the study of the large-scale structure of the Universe, structure and evolution of the Galaxy, and cross-identification of multiwaveband properties in celestial objects.
文摘Objective To compare the acute hemodynamic effects of five different pacing modes in patients with cardiac function NYHA class Ⅰ to Ⅱ without bundle branch block (BBB). Methods This study included 12 patients (SSS 7, Ⅲ°AVB 5) undergoing pacemaker implantation. Right ventricular apex (RVA), right ventricular outflow tract (RVOT), right ventricular bifocal (RV-Bi), left ventricular base (LVB) and bi -ventricular (Bi-Ⅴ) pacing at 60 -80 ppm were done in VVI mode prior to implantation of DDD pacemaker. The cardiac index (CI), mean pulmonary artery pressure (mPAP) and pulmonary capillary wedge pressure (PCWP) were measured with Swan - Ganz thermodilution catheter after 5 minutes of each pacing mode. Results (1) Comparing to pacing at RVA (CI: 2. 41± 0. 38 L/min per m2, PCWP: 16. 7 ±3.3 mmHg), the CI increased and the PCWP decreased significantly in pacing at RVOT(CI: 2. 63 ± 0.46, PCWP: 13. 8±2. 3), LVB(CI: 2. 78±0.52, PCWP: 14. 4±3.1), RV-Bi(CI: 2. 83±0.57, PCWP: 12. 8± 2. 5) and Bi -Ⅴ pacing (CI: 2. 94± 0.60, PCWP: 12. 7±2. 5), P < 0. 01, respectively. (2) The CI of RV-Bi and Bi-Ⅴ pacing was higher than that of RVOT and LVB pacing, the PCWP was lower, P < 0. 05, respectively. (3) There was no significant difference between RV - Bi pacing and Bi-Ⅴ pacing in CI and PCWP. Conclusion There is no significant difference between RV - Bi pacing and Bi -V pacing in the acute hemodynamic effects; however,dual - site pacing is much better than single site pacing in that aspect for patients with cardiac function NYHA class Ⅰ to Ⅱ without BBB. Among single site pacing, the RVOT and LVB pacing is better than RVA pacing in cardiac function.
文摘In this paper, a successfully studied and developed master - slave muld - microcomputers control system based on PC - BUS for hollow spindle fancy yarn spinning machine, mainly Its overall scheme, software and hardware construction, is introduced. Spinning experiments show that the system achieves satisfactory result. This system can solve the diftkultles of mechatronical fusion between domestic hollow splndk fancy yarn spuming muchine and its microcomputer control technology.
文摘A quantitative method is developed to identify the structures of multi-layer woven fabric in this study. Six structural parameters are selected to represent the fabric structure. With some design criteria for the reinforcement of textile composites, the relationships among the structural parameters are derived for different binding patterns of the fabric structure. The conditions, which meet the requirements of structural cell stability,are also discussed.
文摘To meet the development trend of multi-bar warp knit-ting machine towards high-speed,advanced technologyand computer control and the requirements of variousproducts with small quantity,there are many researcheson the computer-aided pattern design of multi-barwarp knitted fabrics.In terms of the special propertiesof the computer-aided pattern design of multi-barwarp knitted fabrics,the Object Oriented Program(OOP)programming-Object Windows class Library(OWL)programming is selected.According to thecharacters of the OWL programming,various functionsare defined.Pattern design and technical parameters canbe output,which offers a great convenience for the fac-tory.
文摘This paper states a new metaheuristic based on Deterministic Finite Automata （DFA） for the multi - objective optimization of combinatorial problems. First, a new DFA named Multi - Objective Deterministic Finite Automata （MDFA） is defined. MDFA allows the representation of the feasible solutions space of combinatorial problems. Second, it is defined and implemented a metaheuritic based on MDFA theory. It is named Metaheuristic of Deterministic Swapping （MODS）. MODS is a local search strategy that works using a MDFA. Due to this, MODS never take into account unfeasible solutions. Hence, it is not necessary to verify the problem constraints for a new solution found. Lastly, MODS is tested using well know instances of the Bi-Objective Traveling Salesman Problem （TSP） from TSPLIB. Its results were compared with eight Ant Colony inspired algorithms and two Genetic algorithms taken from the specialized literature. The comparison was made using metrics such as Spacing, Generational Distance, Inverse Generational Distance and No-Dominated Generation Vectors. In every case, the MODS results on the metrics were always better and in some of those cases, the superiority was 100%.
文摘Worst-case execution time (WCET) analysis of multi-threaded software is still a challenge. This comes mainly from the fact that synchronization has to be taken into account. In this paper, we focus on this issue and on automatically calculating and incorporating stalling times (e.g. caused by lock contention) in a generic graph model. The idea that thread interleavings can be studied with a matrix calculus is novel in this research area. Our sparse matrix representations of the program are manipulated using an extended Kronecker algebra. The resulting graph represents multi-threaded programs similar as CFGs do for sequential programs. With this graph model, we are able to calculate the WCET of multi-threaded concurrent programs including stalling times which are due to synchronization. We employ a generating function-based approach for setting up data flow equations which are solved by well-known elimination-based dataflow analysis methods or an off-the-shelf equation solver. The WCET of multi-threaded programs can finally be calculated with a non-linear function solver.
文摘设计并搭建了制冷量为3 k W、以R124-DMAC为工质、采用电热高温空气模拟发动机排气废热的空冷鼓泡吸收制冷实验系统,通过改变热空气进口温度、冷冻水温度和浓溶泵流率测试系统工作参数的变化趋势。实验结果表明,当发生器稀溶液出口温度约为100℃时,蒸发温度为-4℃,系统COP值最大可达到约0.54,而且实验系统稳定性较好;影响系统制冷量和COP值的主要参数是热空气进口温度和冷冻水温度;当蒸发温度低于5℃时,为了提高制冷效果需考虑设置精馏装置。
