Brittle failure of rocks is a classical rock mechanical problem. Rock failure not only involves initiation and propagation of single crack, but also is associated with initiation, propagation and coalescence of many c...Brittle failure of rocks is a classical rock mechanical problem. Rock failure not only involves initiation and propagation of single crack, but also is associated with initiation, propagation and coalescence of many cracks. The rock failure process analysis （RFPA） tool has been proposed since 1995. The heterogeneity of rocks at a mesoscopic level is considered by assuming that the material properties follow the Weibull distribution. Elastic damage mechanics is used for describing the constitutive law of the meso-level element. The finite element method （FEM） is employed as the basic stress analysis tool. The maximum tensile strain criterion and the Mohr-Coulomb criterion are utilized as the damage threshold. In order to solve the stability problem related to rock engineering structures, fundamental principles of strength reduction method （SRM） and gravity increase method （GIM） are integrated into the RFPA. And the acoustic emission （AE） event rate is employed as the criterion for rock engineering failure. The prominent feature of the RFPA-SRM and RFPA-GIM for stability analysis of rock engineering is that the factor of safety can be obtained without any presumption for the shape and location of the failure surface. In this paper, several geotechnical engineering applications that use the RFPA method to analyze their stability are presented to provide some references for relevant researches. The principles of the RFPA method in engineering are introduced firstly, and then the stability analysis of tunnel, slope and dam is focused on. The results indicate that the RFPA method is capable of capturing the mechanism of rock engineering stability and has the potential for application in a larger range of geo-engineering.展开更多
Damage smear method(DSM)is adopted to study trans-scale progressive rock failure process,based on statistical meso-damage model and finite element solver.The statistical approach is utilized to reflect the mesoscopic ...Damage smear method(DSM)is adopted to study trans-scale progressive rock failure process,based on statistical meso-damage model and finite element solver.The statistical approach is utilized to reflect the mesoscopic rock heterogeneity.The constitutive law of representative volume element(RVE)is established according to continuum damage mechanics in which double-damage criterion is considered.The damage evolution and accumulation of RVEs are used to reveal the macroscopic rock failure characteristics.Each single RVE will be represented by one unique element.The initiation,propagation and coalescence of meso-to macro-cracks are captured by smearing failed elements.The above ideas are formulated into the framework of the DSM and programed into self-developed rock failure process analysis(RFPA)software.Two laboratory-scale examples are conducted and the well-known engineering-scale tests,i.e.Atomic Energy of Canada Limited’s(AECL’s)Underground Research Laboratory(URL)tests,are used for verification.It shows that the simulation results match with other experimental results and field observations.展开更多
The effects of nonlinearity of strength envelopes on 3D slope stability analysis are investigated.A power relation for the nonlinear envelope is employed to derive the 3D factor of safety equations of an extended Spen...The effects of nonlinearity of strength envelopes on 3D slope stability analysis are investigated.A power relation for the nonlinear envelope is employed to derive the 3D factor of safety equations of an extended Spencer method hich satisfies boty force equilibrium and moment equilibrium.Then,a search procedure is presented based on dynamic programming to determine the 3D critical slip surface for a general slope,Linear and nonlinear strength envelopes used for slope stability computations are obtained by fitting curves to the 103 strength data of consolidated-undrained(CU)triaxial compression tests for compacted Israeli clay.Results of a typical 3D problem show that a linear approximation of the nonlinear strength envelope may lead to a significant overestimation of calculated safety factors.展开更多
RFPA is a numerical testing tool for realistic failure process analysis(RFPA)of rock,concrete,composites,and engineering structures.The RFPA solution offers perfect simulation tools for robust modelling of brittle mat...RFPA is a numerical testing tool for realistic failure process analysis(RFPA)of rock,concrete,composites,and engineering structures.The RFPA solution offers perfect simulation tools for robust modelling of brittle material failure and engineering structural damage.The RFPA family of 2D and 3D core products offers the full depth of analysis tools—from a conceptual simulation to advanced展开更多
Based on the nonlinear Barton–Bandis(B–B)failure criterion,this study considers the system reliability of rock wedge stability under the pseudo-static seismic load.The failure probability(Pf)of the system is calcula...Based on the nonlinear Barton–Bandis(B–B)failure criterion,this study considers the system reliability of rock wedge stability under the pseudo-static seismic load.The failure probability(Pf)of the system is calculated based on the Monte−Carlo method when considering parameter correlation and variability.Parameter analysis and sensitivity analysis are carried out to explore the influence of parameters on reliability.The relationships among the failure probability,safety factor(Fs),and variation coefficient are explored,and then stability probability curves of the rock wedge under the pseudo-static seismic load are drawn.The results show that the parameter correlation of the B–B failure criterion has a significant influence on the failure probability,but correlation increases system reliability or decreases system reliability affected by other parameters.Under the pseudo-static seismic action,sliding on both planes is the main failure mode of wedge system.In addition,the parameters with relatively high sensitivity are two angles related to the joint dip.When the coefficient of variation is consistent,the probability of system failure is a function of the safety factor.展开更多
This paper examines a new method of evaluating the stability of a rock slope using a remotely positioned LDV （laser Doppler vibrometer）. We conducted an experiment using physical models and performed a numerical ana...This paper examines a new method of evaluating the stability of a rock slope using a remotely positioned LDV （laser Doppler vibrometer）. We conducted an experiment using physical models and performed a numerical analysis to evaluate the new method. The physical model included： （l） concrete blocks on an artificial soil slope with two block sizes and three slopes; （2） concrete blocks bonded to the concrete base with different contact area. The LDV measurements agreed with conventional seismometer measurements. The dominant frequency of the blocks varied with the stability and dominant frequency and the amplitude varied with the block size. The numerical model was used to examine a concrete block adhered to a concrete base with different contact areas. The dominant frequency of the blocks determined using the numerical model agreed with those obtained from the physical experiments. We analyzed different sized blocks to examine the scaling effects. The dominant frequency of the blocks was inversely related to the block size. These results demonstrated the effectiveness of LDV for evaluating the stability of rock slopes and cleared the block size scaling effects.展开更多
The geotechnical slope design of an open pit wall starts at the bench scale configuration.At this scale,the rock slope stability is governed primarily by the geological discontinuities within the rock mass and as a re...The geotechnical slope design of an open pit wall starts at the bench scale configuration.At this scale,the rock slope stability is governed primarily by the geological discontinuities within the rock mass and as a result,structurally-controlled failures(e.g.planar,wedge or toppling)are most likely to occur.The probabilistic approach offers a major advantage over the traditional deterministic method in that it accounts for the different degrees of variability and uncertainty often encountered in rock properties.This paper presents a bench slope stability assessment for an open pit mine in Peru using a probabilistic-based approach by coupling a kinematic analysis based on stereographic projection techniques followed by a kinetic analysis by means of the limit equilibrium method.Finally,these two probabilities are combined to provide an overall measure of the probability of failure(PoF)of the bench slope system.The case study is characterized by significant scatter in the geometrical and mechanical properties of the joints.Extensive surface mapping was conducted at 36 different sites following the ISRM suggested procedures.Several direct shear tests were carried out.It is shown that by combining field and laboratory measurements and engineering judgment,the probability density functions(PDF)of the discontinuity parameters can be obtained.These are then used in a Monte Carlo simulation process to compute both kinematic and kinetic probabilities of failure.The overall probability of failure aims to provide the design engineer with a tool to critically evaluate the bench performance from a geotechnical risk perspective and to provide a basis for future bench design optimization.展开更多
Deep shale reservoirs are characterized by elevated breakdown pressures,diminished fracture complexity,and reduced modified volumes compared to medium and shallow reservoirs.Therefore,it is urgent to investigate parti...Deep shale reservoirs are characterized by elevated breakdown pressures,diminished fracture complexity,and reduced modified volumes compared to medium and shallow reservoirs.Therefore,it is urgent to investigate particular injection strategies that can optimize breakdown pressure and fracturing efficiency to address the increasing demands for deep shale reservoir stimulation.In this study,the efficiency of various stimulation strategies,including multi-cluster simultaneous fracturing,modified alternating fracturing,alternating shut-in fracturing,and cyclic alternating fracturing,was evaluated.Subsequently,the sensitivity of factors such as the cycle index,shut-in time,cluster spacing,and horizontal permeability was investigated.Additionally,the flow distribution effect within the wellbore was discussed.The results indicate that relative to multi-cluster simultaneous fracturing,modified alternating fracturing exhibits reduced susceptibility to the stress shadow effect,which results in earlier breakdown,extended hydraulic fracture lengths,and more consistent propagation despite an increase in breakdown pressure.The alternating shut-in fracturing benefits the increase of fracture length,which is closely related to the shut-in time.Furthermore,cyclic alternating fracturing markedly lowers breakdown pressure and contributes to uniform fracture propagation,in which the cycle count plays an important role.Modified alternating fracturing demonstrates insensitivity to variations in cluster spacing,whereas horizontal permeability is a critical factor affecting fracture length.The wellbore effect restrains the accumulation of pressure and flow near the perforation,delaying the initiation of hydraulic fractures.The simulation results can provide valuable numerical insights for optimizing injection strategies for deep shale hydraulic fracturing.展开更多
This paper applies the stochastic finite element method to analyse the statistics of stresses in earth dams and assess the safety and reliability of the dams. Formulations of the stochastic finite element method are b...This paper applies the stochastic finite element method to analyse the statistics of stresses in earth dams and assess the safety and reliability of the dams. Formulations of the stochastic finite element method are briefly reviewed and the procedure for assessing dam's strength and stability is described. As an example, a detailed analysis for an actual dam Nululin dam is performed. A practical method for studying built-dams based on the prototype observation data is described.展开更多
The nonlinear Baker failure criterion is introduced into the upper-bound limit analysis to examine the face stability of a shallow tunnel. The tunnel face under the ultimate limit state is analyzed from the perspectiv...The nonlinear Baker failure criterion is introduced into the upper-bound limit analysis to examine the face stability of a shallow tunnel. The tunnel face under the ultimate limit state is analyzed from the perspective of energy balance. The work rates of external forces and internal energy dissipation are calculated. An analytical solution of necessary face pressures is derived. The optimal upper-bound solution of the face pressures is obtained by optimization. The results show that the three dimensionless parameters A, T, n of nonlinear Baker failure criterion have different effects on the necessary face pressures and the pattern failure mechanisms ahead of tunnel face. A is the most important one;n takes the second place, and T is the least one. The computed necessary face pressures are nonlinearly increasing when A is reduced. Combined with the actual monitoring data of Taxia tunnel, the calculation results in this paper is verified. It is suggested that the tunnel face supports should be strengthened timely in soft rocks to prevent the occurrence of face collapse.展开更多
Many experimental results have demonstrated the apparent discrepancy of a rock material between its flexural tensile strength measured using various bending methods and its tensile strength measured using direct tensi...Many experimental results have demonstrated the apparent discrepancy of a rock material between its flexural tensile strength measured using various bending methods and its tensile strength measured using direct tension method or Brazil disc(BD)method.To understand the physical mechanism for such discrepancy,numerical simulation using the realistic failure process analysis(RFPA)is carried out in this work to simulate the tensile failure of heterogeneous rocks.Direct tension and semi-circular bend(SCB)tests are simulated using RFPA for rock materials with different levels of inhomogeneity,which is characterized by the homogeneity index of the Weibull distribution used in RFPA.The numerical results show that the discrepancy in the tensile strength values is caused by the inhomogeneity of the rock material.Furthermore,non-local failure criterion is adopted to calculate the characteristic length of the rock materials used in the simulation.It is shown that below a certain value of the homogeneity index,both the characteristic length and discrepancy between two types of tensile strengths of rock decrease with increase of the homogeneity index up to a critical value,at which the discrepancy disappears and the rock material is essentially homogeneous.展开更多
The Karhunen-Loeve （KL） expansion and probabilistic collocation method （PCM） are combined and applied to an uncertainty analysis of rock failure behavior by integrating a self- developed numerical method （i.e., t...The Karhunen-Loeve （KL） expansion and probabilistic collocation method （PCM） are combined and applied to an uncertainty analysis of rock failure behavior by integrating a self- developed numerical method （i.e., the elastic-plastic cellular automaton （EPCA））. The results from the method developed are compared using the Monte Carlo Simulation （MCS） method. It is concluded that the method developed requires fewer collocations than MCS method to obtain very high accuracy and greatly reduces the computational cost. Based on the method, the elasto- plastic and elasto-brittle-plastic analyses of rocks under mechanical loadings are conducted to study the uncertainty in heterogeneous rock failure behaviour.展开更多
Mass movements are very common problems in the eastern Black Sea region of Turkey due to its climate conditions, geological, and geomorphological characteristics. High slope angle, weathering, dense rainfalls, and ant...Mass movements are very common problems in the eastern Black Sea region of Turkey due to its climate conditions, geological, and geomorphological characteristics. High slope angle, weathering, dense rainfalls, and anthropogenic impacts are generally reported as the most important triggering factors in the region. Following the portal slope excavations in the entrance section of Cankurtaran tunnel, located in the region, where the highly weathered andesitic tuff crops out, a circular toe failure occurred. The main target of the present study is to investigate the causes and occurrence mechanism of this failure and to determine the feasible remedial measures against it using finite element method(FEM) in four stages. These stages are slope stability analyses for pre-and postexcavation cases, and remediation design assessments for slope and tunnel. The results of the FEM-SSR analyses indicated that the insufficient initial support design and weathering of the andesitic tuffs are the main factors that caused the portal failure. After installing a rock retaining wall with jet grout columns and reinforced slope benching applications, the factor of safety increased from 0.83 to 2.80. In addition toslope stability evaluation, the Rock Mass Rating(RMR), Rock Mass Quality(Q) and New Austrian Tunneling Method(NATM) systems were also utilized as empirical methods to characterize the tunnel ground and to determine the tunnel support design. The performance of the suggested empirical support design, induced stress distributions and deformations were analyzed by means of numerical modelling. Finally, it was concluded that the recommended stabilization technique was essential for the dynamic long-term stability and prevents the effects of failure. Additionally, the FEM method gives useful and reasonably reliable results in evaluating the stability of cut slopes and tunnels excavated both in continuous and discontinuous rock masses.展开更多
The instability and failure of high rock slopes have a significant impact on the safe mining operations.Therefore,revealing the instability mechanism of high rock slopes is of great research significance.This paper ai...The instability and failure of high rock slopes have a significant impact on the safe mining operations.Therefore,revealing the instability mechanism of high rock slopes is of great research significance.This paper aims to reveal the instability mechanism of high rock slopes through physical model tests and numerical simulations.Taking the slope failure on the west side of Pit 1 of Husab Uranium Mine in Namibia in 2021 as the research background,a physical model of the high rock slope of Husab Uranium Mine was established by combining with on-site geological data.The experimental system was monitored by a GoPro camera,a CCD camera,and strain sensors.The damage evolution process of the high rock slope model was analyzed,and numerical simulation verification was carried out using Flac 3D software.Thus,the instability mechanism of the slope failure in this open-pit mine was revealed from multiple perspectives.The results show that the instability mechanism of the high rock slope was determined through the evolution of the displacement field and strain field during the model excavation process,as well as the deformation characteristics of the images at the time of instability and failure.The slope deformation process can be divided into four stages:the initial inter-layer dislocation stage,the crack generation stage,the crack propagation stage,and the crack penetration and failure stage.The results of the model experiment and numerical simulation confirm the consistency between the failure mode of the model slope and the actual slope failure on-site,providing guidance for the prevention and control projects of similar types of mine failures.展开更多
A discontinuous deformation and displacement(DDD) analysis method is proposed for modelling the rock failure process. This method combines the rock failure process analysis(RFPA) method(based on finite element method)...A discontinuous deformation and displacement(DDD) analysis method is proposed for modelling the rock failure process. This method combines the rock failure process analysis(RFPA) method(based on finite element method) and discontinuous deformation analysis(DDA) method. RFPA is used to simulate crack initiation, propagation and coalescence processes of rock during the small deformation state. The DDA method is used to simulate the movement of blocks created by the multiple cracks modelled by the RFPA. The newly developed DDD method is particularly suitable for modelling both crack propagation and block movement during the rock failure process because of the natural and convenient coupling of continuous and discontinuous deformation analyses. The proposed method has been used to simulate crack initiation, propagation and coalescence within a slope as well as the block movement during the landslide process. Numerical modelling results indicate that the proposed DDD method can automatically simulate crack propagation and block movement during the rock failure process without degrading accuracy.展开更多
Rock slopes are usually reinforced by a number of rock bolts due to the high efficiency and low price.However,where should the rock bolts be installed is still a troublesome issue.For anti-dip bedding rock slopes(ABRS...Rock slopes are usually reinforced by a number of rock bolts due to the high efficiency and low price.However,where should the rock bolts be installed is still a troublesome issue.For anti-dip bedding rock slopes(ABRSs),the installation position of rock bolts is a controlling factor that determines the reinforcement effect.In this work,a theoretical method is firstly proposed for assessing the stability of ABRSs reinforced by rock bolts using a limit equilibrium model.A comparison of theoretical calculations and numerical results was conducted to test the correctness of the theoretical method.Based on the stability assessment of ABRSs,we introduce adaptive moment estimation method(Adam)to optimize the installation location of rock bolts.Using Adam optimizer,the optimal layout of rock bolts with the maximum factor of safety can be determined,and the factor of safety of the slope increases by about 25%using the same amount of rock bolts but with different installation locations.The proposed method enables the fast stability analysis and supporting design for reinforced ABRSs,which paves the way to smart supporting design of slopes.展开更多
基金Supported by the State Key Development Program for Basic Research of China(2007CB209400)Projects of International Cooperation and Exchanges NSFC(50820125405)the National Natural Science Foundation of China(51004020)
文摘Brittle failure of rocks is a classical rock mechanical problem. Rock failure not only involves initiation and propagation of single crack, but also is associated with initiation, propagation and coalescence of many cracks. The rock failure process analysis （RFPA） tool has been proposed since 1995. The heterogeneity of rocks at a mesoscopic level is considered by assuming that the material properties follow the Weibull distribution. Elastic damage mechanics is used for describing the constitutive law of the meso-level element. The finite element method （FEM） is employed as the basic stress analysis tool. The maximum tensile strain criterion and the Mohr-Coulomb criterion are utilized as the damage threshold. In order to solve the stability problem related to rock engineering structures, fundamental principles of strength reduction method （SRM） and gravity increase method （GIM） are integrated into the RFPA. And the acoustic emission （AE） event rate is employed as the criterion for rock engineering failure. The prominent feature of the RFPA-SRM and RFPA-GIM for stability analysis of rock engineering is that the factor of safety can be obtained without any presumption for the shape and location of the failure surface. In this paper, several geotechnical engineering applications that use the RFPA method to analyze their stability are presented to provide some references for relevant researches. The principles of the RFPA method in engineering are introduced firstly, and then the stability analysis of tunnel, slope and dam is focused on. The results indicate that the RFPA method is capable of capturing the mechanism of rock engineering stability and has the potential for application in a larger range of geo-engineering.
基金supported in part by the National Natural Science Foundation of China (Grant Nos.51679028 and 51879034)Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology (Grant No. SKLGDUEK1804)the Fundamental Research Funds for the Central Universities (Grant No.DUT18JC10)
文摘Damage smear method(DSM)is adopted to study trans-scale progressive rock failure process,based on statistical meso-damage model and finite element solver.The statistical approach is utilized to reflect the mesoscopic rock heterogeneity.The constitutive law of representative volume element(RVE)is established according to continuum damage mechanics in which double-damage criterion is considered.The damage evolution and accumulation of RVEs are used to reveal the macroscopic rock failure characteristics.Each single RVE will be represented by one unique element.The initiation,propagation and coalescence of meso-to macro-cracks are captured by smearing failed elements.The above ideas are formulated into the framework of the DSM and programed into self-developed rock failure process analysis(RFPA)software.Two laboratory-scale examples are conducted and the well-known engineering-scale tests,i.e.Atomic Energy of Canada Limited’s(AECL’s)Underground Research Laboratory(URL)tests,are used for verification.It shows that the simulation results match with other experimental results and field observations.
文摘The effects of nonlinearity of strength envelopes on 3D slope stability analysis are investigated.A power relation for the nonlinear envelope is employed to derive the 3D factor of safety equations of an extended Spencer method hich satisfies boty force equilibrium and moment equilibrium.Then,a search procedure is presented based on dynamic programming to determine the 3D critical slip surface for a general slope,Linear and nonlinear strength envelopes used for slope stability computations are obtained by fitting curves to the 103 strength data of consolidated-undrained(CU)triaxial compression tests for compacted Israeli clay.Results of a typical 3D problem show that a linear approximation of the nonlinear strength envelope may lead to a significant overestimation of calculated safety factors.
文摘RFPA is a numerical testing tool for realistic failure process analysis(RFPA)of rock,concrete,composites,and engineering structures.The RFPA solution offers perfect simulation tools for robust modelling of brittle material failure and engineering structural damage.The RFPA family of 2D and 3D core products offers the full depth of analysis tools—from a conceptual simulation to advanced
基金Project(51878668)supported by the National Natural Science Foundation of ChinaProjects(2017-122-058,2018-123-040)supported by the Guizhou Provincial Department of Transportation Foundation,ChinaProject([2018]2815)supported by the Guizhou Provincial Department of Science and Technology Foundation,China。
文摘Based on the nonlinear Barton–Bandis(B–B)failure criterion,this study considers the system reliability of rock wedge stability under the pseudo-static seismic load.The failure probability(Pf)of the system is calculated based on the Monte−Carlo method when considering parameter correlation and variability.Parameter analysis and sensitivity analysis are carried out to explore the influence of parameters on reliability.The relationships among the failure probability,safety factor(Fs),and variation coefficient are explored,and then stability probability curves of the rock wedge under the pseudo-static seismic load are drawn.The results show that the parameter correlation of the B–B failure criterion has a significant influence on the failure probability,but correlation increases system reliability or decreases system reliability affected by other parameters.Under the pseudo-static seismic action,sliding on both planes is the main failure mode of wedge system.In addition,the parameters with relatively high sensitivity are two angles related to the joint dip.When the coefficient of variation is consistent,the probability of system failure is a function of the safety factor.
文摘This paper examines a new method of evaluating the stability of a rock slope using a remotely positioned LDV （laser Doppler vibrometer）. We conducted an experiment using physical models and performed a numerical analysis to evaluate the new method. The physical model included： （l） concrete blocks on an artificial soil slope with two block sizes and three slopes; （2） concrete blocks bonded to the concrete base with different contact area. The LDV measurements agreed with conventional seismometer measurements. The dominant frequency of the blocks varied with the stability and dominant frequency and the amplitude varied with the block size. The numerical model was used to examine a concrete block adhered to a concrete base with different contact areas. The dominant frequency of the blocks determined using the numerical model agreed with those obtained from the physical experiments. We analyzed different sized blocks to examine the scaling effects. The dominant frequency of the blocks was inversely related to the block size. These results demonstrated the effectiveness of LDV for evaluating the stability of rock slopes and cleared the block size scaling effects.
基金supported by a scholarship from the Peruvian Institute of Mining Engineers
文摘The geotechnical slope design of an open pit wall starts at the bench scale configuration.At this scale,the rock slope stability is governed primarily by the geological discontinuities within the rock mass and as a result,structurally-controlled failures(e.g.planar,wedge or toppling)are most likely to occur.The probabilistic approach offers a major advantage over the traditional deterministic method in that it accounts for the different degrees of variability and uncertainty often encountered in rock properties.This paper presents a bench slope stability assessment for an open pit mine in Peru using a probabilistic-based approach by coupling a kinematic analysis based on stereographic projection techniques followed by a kinetic analysis by means of the limit equilibrium method.Finally,these two probabilities are combined to provide an overall measure of the probability of failure(PoF)of the bench slope system.The case study is characterized by significant scatter in the geometrical and mechanical properties of the joints.Extensive surface mapping was conducted at 36 different sites following the ISRM suggested procedures.Several direct shear tests were carried out.It is shown that by combining field and laboratory measurements and engineering judgment,the probability density functions(PDF)of the discontinuity parameters can be obtained.These are then used in a Monte Carlo simulation process to compute both kinematic and kinetic probabilities of failure.The overall probability of failure aims to provide the design engineer with a tool to critically evaluate the bench performance from a geotechnical risk perspective and to provide a basis for future bench design optimization.
基金supported by the National Natural Science Foundation of China(NSFC)(Grant Nos.42377156,42077251 and 42202305).
文摘Deep shale reservoirs are characterized by elevated breakdown pressures,diminished fracture complexity,and reduced modified volumes compared to medium and shallow reservoirs.Therefore,it is urgent to investigate particular injection strategies that can optimize breakdown pressure and fracturing efficiency to address the increasing demands for deep shale reservoir stimulation.In this study,the efficiency of various stimulation strategies,including multi-cluster simultaneous fracturing,modified alternating fracturing,alternating shut-in fracturing,and cyclic alternating fracturing,was evaluated.Subsequently,the sensitivity of factors such as the cycle index,shut-in time,cluster spacing,and horizontal permeability was investigated.Additionally,the flow distribution effect within the wellbore was discussed.The results indicate that relative to multi-cluster simultaneous fracturing,modified alternating fracturing exhibits reduced susceptibility to the stress shadow effect,which results in earlier breakdown,extended hydraulic fracture lengths,and more consistent propagation despite an increase in breakdown pressure.The alternating shut-in fracturing benefits the increase of fracture length,which is closely related to the shut-in time.Furthermore,cyclic alternating fracturing markedly lowers breakdown pressure and contributes to uniform fracture propagation,in which the cycle count plays an important role.Modified alternating fracturing demonstrates insensitivity to variations in cluster spacing,whereas horizontal permeability is a critical factor affecting fracture length.The wellbore effect restrains the accumulation of pressure and flow near the perforation,delaying the initiation of hydraulic fractures.The simulation results can provide valuable numerical insights for optimizing injection strategies for deep shale hydraulic fracturing.
文摘This paper applies the stochastic finite element method to analyse the statistics of stresses in earth dams and assess the safety and reliability of the dams. Formulations of the stochastic finite element method are briefly reviewed and the procedure for assessing dam's strength and stability is described. As an example, a detailed analysis for an actual dam Nululin dam is performed. A practical method for studying built-dams based on the prototype observation data is described.
基金Projects(51674115,51804113)supported by the National Natural Science Foundation of ChinaProject(17B095)supported by the Excellent Youth Subsidy Project of Hunan Provincial Department of Education,China
文摘The nonlinear Baker failure criterion is introduced into the upper-bound limit analysis to examine the face stability of a shallow tunnel. The tunnel face under the ultimate limit state is analyzed from the perspective of energy balance. The work rates of external forces and internal energy dissipation are calculated. An analytical solution of necessary face pressures is derived. The optimal upper-bound solution of the face pressures is obtained by optimization. The results show that the three dimensionless parameters A, T, n of nonlinear Baker failure criterion have different effects on the necessary face pressures and the pattern failure mechanisms ahead of tunnel face. A is the most important one;n takes the second place, and T is the least one. The computed necessary face pressures are nonlinearly increasing when A is reduced. Combined with the actual monitoring data of Taxia tunnel, the calculation results in this paper is verified. It is suggested that the tunnel face supports should be strengthened timely in soft rocks to prevent the occurrence of face collapse.
基金supported by the Natural Science Foundation of China(Grant Nos.51704211 and 11602165).
文摘Many experimental results have demonstrated the apparent discrepancy of a rock material between its flexural tensile strength measured using various bending methods and its tensile strength measured using direct tension method or Brazil disc(BD)method.To understand the physical mechanism for such discrepancy,numerical simulation using the realistic failure process analysis(RFPA)is carried out in this work to simulate the tensile failure of heterogeneous rocks.Direct tension and semi-circular bend(SCB)tests are simulated using RFPA for rock materials with different levels of inhomogeneity,which is characterized by the homogeneity index of the Weibull distribution used in RFPA.The numerical results show that the discrepancy in the tensile strength values is caused by the inhomogeneity of the rock material.Furthermore,non-local failure criterion is adopted to calculate the characteristic length of the rock materials used in the simulation.It is shown that below a certain value of the homogeneity index,both the characteristic length and discrepancy between two types of tensile strengths of rock decrease with increase of the homogeneity index up to a critical value,at which the discrepancy disappears and the rock material is essentially homogeneous.
基金supported by the National Natural Science Foundation of China(Nos.51322906 and 41272349)the National Basic Research Program of China(No.2013CB036405)Youth Innovation Promotion Association of CAS(No.2011240)
文摘The Karhunen-Loeve （KL） expansion and probabilistic collocation method （PCM） are combined and applied to an uncertainty analysis of rock failure behavior by integrating a self- developed numerical method （i.e., the elastic-plastic cellular automaton （EPCA））. The results from the method developed are compared using the Monte Carlo Simulation （MCS） method. It is concluded that the method developed requires fewer collocations than MCS method to obtain very high accuracy and greatly reduces the computational cost. Based on the method, the elasto- plastic and elasto-brittle-plastic analyses of rocks under mechanical loadings are conducted to study the uncertainty in heterogeneous rock failure behaviour.
文摘Mass movements are very common problems in the eastern Black Sea region of Turkey due to its climate conditions, geological, and geomorphological characteristics. High slope angle, weathering, dense rainfalls, and anthropogenic impacts are generally reported as the most important triggering factors in the region. Following the portal slope excavations in the entrance section of Cankurtaran tunnel, located in the region, where the highly weathered andesitic tuff crops out, a circular toe failure occurred. The main target of the present study is to investigate the causes and occurrence mechanism of this failure and to determine the feasible remedial measures against it using finite element method(FEM) in four stages. These stages are slope stability analyses for pre-and postexcavation cases, and remediation design assessments for slope and tunnel. The results of the FEM-SSR analyses indicated that the insufficient initial support design and weathering of the andesitic tuffs are the main factors that caused the portal failure. After installing a rock retaining wall with jet grout columns and reinforced slope benching applications, the factor of safety increased from 0.83 to 2.80. In addition toslope stability evaluation, the Rock Mass Rating(RMR), Rock Mass Quality(Q) and New Austrian Tunneling Method(NATM) systems were also utilized as empirical methods to characterize the tunnel ground and to determine the tunnel support design. The performance of the suggested empirical support design, induced stress distributions and deformations were analyzed by means of numerical modelling. Finally, it was concluded that the recommended stabilization technique was essential for the dynamic long-term stability and prevents the effects of failure. Additionally, the FEM method gives useful and reasonably reliable results in evaluating the stability of cut slopes and tunnels excavated both in continuous and discontinuous rock masses.
文摘The instability and failure of high rock slopes have a significant impact on the safe mining operations.Therefore,revealing the instability mechanism of high rock slopes is of great research significance.This paper aims to reveal the instability mechanism of high rock slopes through physical model tests and numerical simulations.Taking the slope failure on the west side of Pit 1 of Husab Uranium Mine in Namibia in 2021 as the research background,a physical model of the high rock slope of Husab Uranium Mine was established by combining with on-site geological data.The experimental system was monitored by a GoPro camera,a CCD camera,and strain sensors.The damage evolution process of the high rock slope model was analyzed,and numerical simulation verification was carried out using Flac 3D software.Thus,the instability mechanism of the slope failure in this open-pit mine was revealed from multiple perspectives.The results show that the instability mechanism of the high rock slope was determined through the evolution of the displacement field and strain field during the model excavation process,as well as the deformation characteristics of the images at the time of instability and failure.The slope deformation process can be divided into four stages:the initial inter-layer dislocation stage,the crack generation stage,the crack propagation stage,and the crack penetration and failure stage.The results of the model experiment and numerical simulation confirm the consistency between the failure mode of the model slope and the actual slope failure on-site,providing guidance for the prevention and control projects of similar types of mine failures.
基金supported by the National Basic Research Program of China("973"Project)(Grant No.2014CB047100)the National Natural Science Foundation of China(Grant Nos.51421064,51474046 & 51174039)the Fundamental Research Funds for the Central Universities(Grant No.DUT14LK21)
文摘A discontinuous deformation and displacement(DDD) analysis method is proposed for modelling the rock failure process. This method combines the rock failure process analysis(RFPA) method(based on finite element method) and discontinuous deformation analysis(DDA) method. RFPA is used to simulate crack initiation, propagation and coalescence processes of rock during the small deformation state. The DDA method is used to simulate the movement of blocks created by the multiple cracks modelled by the RFPA. The newly developed DDD method is particularly suitable for modelling both crack propagation and block movement during the rock failure process because of the natural and convenient coupling of continuous and discontinuous deformation analyses. The proposed method has been used to simulate crack initiation, propagation and coalescence within a slope as well as the block movement during the landslide process. Numerical modelling results indicate that the proposed DDD method can automatically simulate crack propagation and block movement during the rock failure process without degrading accuracy.
基金supported by National Natural Science Foundation of China(Grant No.12072358)Youth Innovation Promotion Association,Chinese Academy of Sciences(Grant No.2022333)Key Laboratory of Roads and Railway Safety Control(Shijiazhuang Tiedao University),the Ministry of Education(Grant No.STDTKF202103).
文摘Rock slopes are usually reinforced by a number of rock bolts due to the high efficiency and low price.However,where should the rock bolts be installed is still a troublesome issue.For anti-dip bedding rock slopes(ABRSs),the installation position of rock bolts is a controlling factor that determines the reinforcement effect.In this work,a theoretical method is firstly proposed for assessing the stability of ABRSs reinforced by rock bolts using a limit equilibrium model.A comparison of theoretical calculations and numerical results was conducted to test the correctness of the theoretical method.Based on the stability assessment of ABRSs,we introduce adaptive moment estimation method(Adam)to optimize the installation location of rock bolts.Using Adam optimizer,the optimal layout of rock bolts with the maximum factor of safety can be determined,and the factor of safety of the slope increases by about 25%using the same amount of rock bolts but with different installation locations.The proposed method enables the fast stability analysis and supporting design for reinforced ABRSs,which paves the way to smart supporting design of slopes.
