A gas puff imaging(GPI)diagnostic has been developed and operated on EAST since 2012,and the time-delay estimation(TDE)method is used to derive the propagation velocity of fluctuations from the two-dimensional GPI dat...A gas puff imaging(GPI)diagnostic has been developed and operated on EAST since 2012,and the time-delay estimation(TDE)method is used to derive the propagation velocity of fluctuations from the two-dimensional GPI data.However,with the TDE method it is difficult to analyze the data with fast transient events,such as edge-localized mode(ELM).Consequently,a method called the spatial displacement estimation(SDE)algorithm is developed to estimate the turbulence velocity with high temporal resolution.Based on the SDE algorithm,we make some improvements,including an adaptive median filter and super-resolution technology.After the development of the algorithm,a straight-line movement and a curved-line movement are used to test the accuracy of the algorithm,and the calculated speed agrees well with preset speed.This SDE algorithm is applied to the EAST GPI data analysis,and the derived propagation velocity of turbulence is consistent with that from the TDE method,but with much higher temporal resolution.展开更多
The finite strip controlling equation of pinned curve box was deduced on basis of Novozhilov theory and with flexibility method, and the problem of continuous curve box was resolved. Dynamic Bayesian error function of...The finite strip controlling equation of pinned curve box was deduced on basis of Novozhilov theory and with flexibility method, and the problem of continuous curve box was resolved. Dynamic Bayesian error function of displacement parameters of continuous curve box was found. The corresponding formulas of dynamic Bayesian expectation and variance were derived. After the method of solving the automatic search of step length was put forward, the optimization estimation computing formulas were also obtained by adapting conjugate gradient method. Then the steps of dynamic Bayesian estimation were given in detail. Through analysis of a Classic example, the criterion of judging the precision of the known information is gained as well as some other important conclusions about dynamic Bayesian stochastic estimation of displacement parameters of continuous curve box.展开更多
We’ll study the FEM for a model for compressible miscible displacement in porous media which includes molecular diffusion and mechanical dispersion in one-dimensional space.A class of vertices-edges-elements interpol...We’ll study the FEM for a model for compressible miscible displacement in porous media which includes molecular diffusion and mechanical dispersion in one-dimensional space.A class of vertices-edges-elements interpolation operator ink is introduced.With the help of ink(not elliptic projection),the optimal error estimate in L∞(J;L2(Ω)) norm of FEM is proved.展开更多
The longitudinal dispersion of the projectile in shooting tests of two-dimensional trajectory corrections fused with fixed canards is extremely large that it sometimes exceeds the correction ability of the correction ...The longitudinal dispersion of the projectile in shooting tests of two-dimensional trajectory corrections fused with fixed canards is extremely large that it sometimes exceeds the correction ability of the correction fuse actuator.The impact point easily deviates from the target,and thus the correction result cannot be readily evaluated.However,the cost of shooting tests is considerably high to conduct many tests for data collection.To address this issue,this study proposes an aiming method for shooting tests based on small sample size.The proposed method uses the Bootstrap method to expand the test data;repeatedly iterates and corrects the position of the simulated theoretical impact points through an improved compatibility test method;and dynamically adjusts the weight of the prior distribution of simulation results based on Kullback-Leibler divergence,which to some extent avoids the real data being"submerged"by the simulation data and achieves the fusion Bayesian estimation of the dispersion center.The experimental results show that when the simulation accuracy is sufficiently high,the proposed method yields a smaller mean-square deviation in estimating the dispersion center and higher shooting accuracy than those of the three comparison methods,which is more conducive to reflecting the effect of the control algorithm and facilitating test personnel to iterate their proposed structures and algorithms.;in addition,this study provides a knowledge base for further comprehensive studies in the future.展开更多
Machine learning methods, one type of methods used in artificial intelligence, are now widely used to analyze two-dimensional (2D) images in various fields. In these analyses, estimating the boundary between two regio...Machine learning methods, one type of methods used in artificial intelligence, are now widely used to analyze two-dimensional (2D) images in various fields. In these analyses, estimating the boundary between two regions is basic but important. If the model contains stochastic factors such as random observation errors, determining the boundary is not easy. When the probability distributions are mis-specified, ordinal methods such as probit and logit maximum likelihood estimators (MLE) have large biases. The grouping estimator is a semiparametric estimator based on the grouping of data that does not require specific probability distributions. For 2D images, the grouping is simple. Monte Carlo experiments show that the grouping estimator clearly improves the probit MLE in many cases. The grouping estimator essentially makes the resolution density lower, and the present findings imply that methods using low-resolution image analyses might not be the proper ones in high-density image analyses. It is necessary to combine and compare the results of high- and low-resolution image analyses. The grouping estimator may provide theoretical justifications for such analysis.展开更多
As a new structure of solid matter quasicrystal brings profound new ideas to the traditional condensed matter physics, its elastic equations are more complicated than that of traditional crystal. A contact problem of ...As a new structure of solid matter quasicrystal brings profound new ideas to the traditional condensed matter physics, its elastic equations are more complicated than that of traditional crystal. A contact problem of decagonal two? dimensional quasicrystal material under the action of a rigid flat die is solved satisfactorily by introducing displacement function and using Fourier analysis and dual integral equations theory, and the analytical expressions of stress and displacement fields of the contact problem are achieved. The results show that if the contact displacement is a constant in the contact zone, the vertical contact stress has order -1/2 singularity on the edge of contact zone, which provides the important mechanics parameter for contact deformation of the quasicrystal.展开更多
Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi L...Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi Lake, China, a two-dimensional water quality model was developed in the research. The hydrodynamics module was numerically solved by the alternating direction iteration （ADI） method. The parameters of the water quality module were obtained through the in situ experiments and the laboratory analyses that were conducted from 2006 to 2007. The model was calibrated and verified by the observation data in 2007. Among the four modelled key variables, i.e., water level, COD （in CODcr）, NH4＋-N and PO43-P the minimum value of the coefficient of determination （COD） was 0.69, indicating the model performed reasonably well. The developed model was then applied to simulate the water quality changes at a downstream cross-section assuming that the designed restoration programs were implemented. According to the simulated results, the restoration programs could cut down the loads of COD and PO43-P about 15%. Such a load reduction, unfortunately, would have very little effect on the NH4^＋-N removal. Moreover, the water quality at the outlet cross-section would be still in class V （3838-02）, indicating more measures should be taken to further reduce the loads. The study demonstrated the capability of water quality models to support aquatic ecosystem restorations.展开更多
For the evaluation of structures with known ductility demands,the constant-ductility displacement ratio spectra(CDDRS) are particularly useful for providing inelastic displacement ratios to estimate maximum lateral in...For the evaluation of structures with known ductility demands,the constant-ductility displacement ratio spectra(CDDRS) are particularly useful for providing inelastic displacement ratios to estimate maximum lateral inelastic displacement demands from maximum elastic displacement demands.The CDDRS are computed for single-degree-of-freedom systems(SDOF) by considering or ignoring P-Δ effect for different ductility levels when subjected to 344 earthquake ground motions recorded in four site classes.The modified expressions of CDDRS for P-Δ effect are proposed.It is concluded that the P-Δ effect on CDDRS is significant,and the effect increases with the increase of ductility level.In the long-period region,the CDDRS ignoring P-Δ effect almost conforms to the equal-displacement rule.But in the case of higher ductility level,the CDDRS considering P-Δ effect are much higher than 1.0,which do not conform to the equal-displacement rule.展开更多
A direction-of-arrival （DOA） estimation algorithm based on direct data domain （D3） approach is presented. This method can accuracy estimate DOA using one snapshot modified data, called the temporal and spatial two...A direction-of-arrival （DOA） estimation algorithm based on direct data domain （D3） approach is presented. This method can accuracy estimate DOA using one snapshot modified data, called the temporal and spatial two-dimensional vector reconstruction （TSR） method. The key idea is to apply the D3 approach which can extract the signal of given frequency but null out other frequency signals in temporal domain. Then the spatial vector reconstruction processing is used to estimate the angle of the spatial coherent signal source based on extract signal data. Compared with the common temporal and spatial processing approach, the TSR method has a lower computational load, higher real-time performance, robustness and angular accuracy of DOA. The proposed algorithm can be directly applied to the phased array radar of coherent pulses. Simulation results demonstrate the performance of the proposed technique.展开更多
Traditional methods for early warning of dam displacements usually assume that residual displacements follow a normal distribution.This assumption deviates from the reality,thereby affecting the reliability of early w...Traditional methods for early warning of dam displacements usually assume that residual displacements follow a normal distribution.This assumption deviates from the reality,thereby affecting the reliability of early warning results and leading to misjudgments of dam displacement behavior.To solve this problem,this study proposed an early warning method using a non-normal distribution function.A new early warning index was developed using cumulative distribution function(CDF)values.The method of kernel density estimation was used to calculate the CDF values of residual displacements at a single point.The copula function was used to compute the CDF values of residual displacements at multiple points.Numerical results showed that,with residual displacements in a non-normal distribution,the early warning method proposed in this study accurately reflected the dam displacement behavior and effectively reduced the frequency of false alarms.This method is expected to aid in the safe operation of dams.展开更多
The interface crack problems in the two-dimensional(2D)decagonal quasicrystal(QC)coating are theoretically and numerically investigated with a displacement discontinuity method.The 2D general solution is obtained base...The interface crack problems in the two-dimensional(2D)decagonal quasicrystal(QC)coating are theoretically and numerically investigated with a displacement discontinuity method.The 2D general solution is obtained based on the potential theory.An analogy method is proposed based on the relationship between the general solutions for 2D decagonal and one-dimensional(1D)hexagonal QCs.According to the analogy method,the fundamental solutions of concentrated point phonon displacement discontinuities are obtained on the interface.By using the superposition principle,the hypersingular boundary integral-differential equations in terms of displacement discontinuities are determined for a line interface crack.Further,Green’s functions are found for uniform displacement discontinuities on a line element.The oscillatory singularity near a crack tip is eliminated by adopting the Gaussian distribution to approximate the delta function.The stress intensity factors(SIFs)with ordinary singularity and the energy release rate(ERR)are derived.Finally,a boundary element method is put forward to investigate the effects of different factors on the fracture.展开更多
In this article,some high-order local discontinuous Galerkin(LDG)schemes based on some second-order θ approximation formulas in time are presented to solve a two-dimen-sional nonlinear fractional diffusion equation.T...In this article,some high-order local discontinuous Galerkin(LDG)schemes based on some second-order θ approximation formulas in time are presented to solve a two-dimen-sional nonlinear fractional diffusion equation.The unconditional stability of the LDG scheme is proved,and an a priori error estimate with O(h^(k+1)+At^(2))is derived,where k≥0 denotes the index of the basis function.Extensive numerical results with Q^(k)(k=0,1,2,3)elements are provided to confirm our theoretical results,which also show that the second-order convergence rate in time is not impacted by the changed parameter θ.展开更多
In this paper, we consider the initial-boundary value problem of two-dimensional first-order linear hyperbolic equation with variable coefficients. By using the upwind difference method to discretize the spatial deriv...In this paper, we consider the initial-boundary value problem of two-dimensional first-order linear hyperbolic equation with variable coefficients. By using the upwind difference method to discretize the spatial derivative term and the forward and backward Euler method to discretize the time derivative term, the explicit and implicit upwind difference schemes are obtained respectively. It is proved that the explicit upwind scheme is conditionally stable and the implicit upwind scheme is unconditionally stable. Then the convergence of the schemes is derived. Numerical examples verify the results of theoretical analysis.展开更多
Compressible miscible displacement of one fluid by another in porous media is modelled by a nonlinear parabolic system. A finite element procedure is introduced to approximate the concentration of one fluid and the pr...Compressible miscible displacement of one fluid by another in porous media is modelled by a nonlinear parabolic system. A finite element procedure is introduced to approximate the concentration of one fluid and the pressure of the mixture. The concentration is treated by a Galerkin method while the pressure is treated by a parabolic mixed finite element method. The effect of dispersion, which is neglected in [1], is considered. Optimal order estimates in L2 are derived for the errors in the approximate solutions.展开更多
To guarantee the safety and the quality of the deep pit construction of a high building, it is necessary to monitor the deformation of the supporting structure of the pit. At present, there are mainly two methods to m...To guarantee the safety and the quality of the deep pit construction of a high building, it is necessary to monitor the deformation of the supporting structure of the pit. At present, there are mainly two methods to monitor the geometric deformation of the supporting structure of the pit. One is to monitor the displacements of the tops of the piles; the other is to monitor the deep displacements of the piles. Based on the analysis of the characteristics of both the top monitoring data and the deep monitoring data, a united data processing method was put forward. A model of conicoid fitting model was chosen to describe the deformation surface of the pit, and then the robust estimation was adopted to avoid the influence of the gross errors existing in the observations. It was proved effective and accurate to analyze the deformation of the monitoring surface with this method. The steps of the method were concluded in detail.展开更多
The research of the miscible oil and water displacement problem with moving boundary values is of great value to the history of oil-gas transport and accumulation in the basin evolution as well as to the rational eval...The research of the miscible oil and water displacement problem with moving boundary values is of great value to the history of oil-gas transport and accumulation in the basin evolution as well as to the rational evaluation in prospecting and exploiting oil-gas resources. The mathematical model can be described as a coupled system of nonlinear partial differential equations with moving boundary values. For the twodimensional bounded region, the upwind finite difference schemes are proposed. Some techniques, such as the calculus of variations, the change of variables, and the theory of a priori estimates, are used. The optimal orderl2-norm estimates are derived for the errors in the approximate solutions. The research is important both theoretically and practically for the model analysis in the field, the model numerical method, and the software development.展开更多
A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation f...A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation for the model is carried out with methane-air-5A molecularsieve in a bed under the condition of step injection of tracer from a point on the main axis of thebed by the curve fitting method in the time domain.展开更多
For compressible two-phase displacement problem, a kind of upwind operator splitting finite difference schemes is put forward and make use of operator splitting, of calculus of variations, multiplicative commutation r...For compressible two-phase displacement problem, a kind of upwind operator splitting finite difference schemes is put forward and make use of operator splitting, of calculus of variations, multiplicative commutation rule of difference operators, decomposition of high order difference operators and prior estimates are adopted. Optimal order estimates in L 2 norm are derived to determine the error, in the approximate solution.展开更多
In post-earthquake surveys,it is difficult(and often infeasible)to observe and quantify displacements beyond line-of-sight(LOS),given seismic force-resisting and gravity systems exist completely or partially within a ...In post-earthquake surveys,it is difficult(and often infeasible)to observe and quantify displacements beyond line-of-sight(LOS),given seismic force-resisting and gravity systems exist completely or partially within a building′s enclosure.To overcome this limitation,we develop a novel framework that generalizes graph-based state estimation towards structural joint localization via engineered landmarks.These landmarks provide an indirect means to estimate residual displacements where direct LOS is unavailable.Within our framework,engineered landmarks define topologies of uniquely identifiable landmarks that are either visible or non-visible to a robot performing simultaneous localization and mapping(SLAM).Within the SLAM approach,factors encoding robot odometry and robot-to-visible landmark measurements are formulated for the cases of wireless sensing and fiducial object detection and tracking.Visible landmarks are rigidly attached to non-visible landmark subsets for each engineered landmark,where the complete set of non-visible landmarks form globally rigid and localizable connectivity graphs via range-based factors.Complimentary subsets of non-visible landmarks are embedded within the base structure and uniquely define joint pose via geometric factors.All factors are unified within a common graph to solve for the maximum a posteriori estimate of robot,landmark,and joint states via nonlinear least squares optimization.To demonstrate the applicability of our approach,we apply the Monte Carlo method over a parameterization of system noise to calculate residual joint pose error distributions,maximum average inter-story drift ratios,and related summary statistics for a 19-story nonlinear structural model.By performing nonlinear time history analyses over sets of service-level and maximum considered earthquakes,our parametric study gives insight into our method′s application towards post-earthquake building evaluation in non-LOS conditions.展开更多
A class of periodic initial value problems for two-dimensional Newton- Boussinesq equations are investigated in this paper. The Newton-Boussinesq equations are turned into the equivalent integral equations. With itera...A class of periodic initial value problems for two-dimensional Newton- Boussinesq equations are investigated in this paper. The Newton-Boussinesq equations are turned into the equivalent integral equations. With iteration methods, the local existence of the solutions is obtained. Using the method of a priori estimates, the global existence of the solution is proved.展开更多
基金supported by the National Magnetic Confinement Fusion Energy R&D Program of China(Nos.2022YFE03030001,2022YFE03020004 and 2022YFE 03050003)National Natural Science Foundation of China(Nos.12275310,11975275,12175277 and 11975271)+2 种基金the Science Foundation of Institute of Plasma Physics,Chinese Academy of Sciences(No.DSJJ-2021-01)the Collaborative Innovation Program of Hefei Science Center,Chinese Academy of Sciences(No.2021HSC-CIP019)the Users with Excellence Program of Hefei Science Center,Chinese Academy of Sciences(Nos.2021HSC-UE014 and 2021HSCUE012)。
文摘A gas puff imaging(GPI)diagnostic has been developed and operated on EAST since 2012,and the time-delay estimation(TDE)method is used to derive the propagation velocity of fluctuations from the two-dimensional GPI data.However,with the TDE method it is difficult to analyze the data with fast transient events,such as edge-localized mode(ELM).Consequently,a method called the spatial displacement estimation(SDE)algorithm is developed to estimate the turbulence velocity with high temporal resolution.Based on the SDE algorithm,we make some improvements,including an adaptive median filter and super-resolution technology.After the development of the algorithm,a straight-line movement and a curved-line movement are used to test the accuracy of the algorithm,and the calculated speed agrees well with preset speed.This SDE algorithm is applied to the EAST GPI data analysis,and the derived propagation velocity of turbulence is consistent with that from the TDE method,but with much higher temporal resolution.
文摘The finite strip controlling equation of pinned curve box was deduced on basis of Novozhilov theory and with flexibility method, and the problem of continuous curve box was resolved. Dynamic Bayesian error function of displacement parameters of continuous curve box was found. The corresponding formulas of dynamic Bayesian expectation and variance were derived. After the method of solving the automatic search of step length was put forward, the optimization estimation computing formulas were also obtained by adapting conjugate gradient method. Then the steps of dynamic Bayesian estimation were given in detail. Through analysis of a Classic example, the criterion of judging the precision of the known information is gained as well as some other important conclusions about dynamic Bayesian stochastic estimation of displacement parameters of continuous curve box.
基金This research is supported by the Foundation for Talents for Next Century of Shandong University
文摘We’ll study the FEM for a model for compressible miscible displacement in porous media which includes molecular diffusion and mechanical dispersion in one-dimensional space.A class of vertices-edges-elements interpolation operator ink is introduced.With the help of ink(not elliptic projection),the optimal error estimate in L∞(J;L2(Ω)) norm of FEM is proved.
基金the National Natural Science Foundation of China(Grant No.61973033)Preliminary Research of Equipment(Grant No.9090102010305)for funding the experiments。
文摘The longitudinal dispersion of the projectile in shooting tests of two-dimensional trajectory corrections fused with fixed canards is extremely large that it sometimes exceeds the correction ability of the correction fuse actuator.The impact point easily deviates from the target,and thus the correction result cannot be readily evaluated.However,the cost of shooting tests is considerably high to conduct many tests for data collection.To address this issue,this study proposes an aiming method for shooting tests based on small sample size.The proposed method uses the Bootstrap method to expand the test data;repeatedly iterates and corrects the position of the simulated theoretical impact points through an improved compatibility test method;and dynamically adjusts the weight of the prior distribution of simulation results based on Kullback-Leibler divergence,which to some extent avoids the real data being"submerged"by the simulation data and achieves the fusion Bayesian estimation of the dispersion center.The experimental results show that when the simulation accuracy is sufficiently high,the proposed method yields a smaller mean-square deviation in estimating the dispersion center and higher shooting accuracy than those of the three comparison methods,which is more conducive to reflecting the effect of the control algorithm and facilitating test personnel to iterate their proposed structures and algorithms.;in addition,this study provides a knowledge base for further comprehensive studies in the future.
文摘Machine learning methods, one type of methods used in artificial intelligence, are now widely used to analyze two-dimensional (2D) images in various fields. In these analyses, estimating the boundary between two regions is basic but important. If the model contains stochastic factors such as random observation errors, determining the boundary is not easy. When the probability distributions are mis-specified, ordinal methods such as probit and logit maximum likelihood estimators (MLE) have large biases. The grouping estimator is a semiparametric estimator based on the grouping of data that does not require specific probability distributions. For 2D images, the grouping is simple. Monte Carlo experiments show that the grouping estimator clearly improves the probit MLE in many cases. The grouping estimator essentially makes the resolution density lower, and the present findings imply that methods using low-resolution image analyses might not be the proper ones in high-density image analyses. It is necessary to combine and compare the results of high- and low-resolution image analyses. The grouping estimator may provide theoretical justifications for such analysis.
文摘As a new structure of solid matter quasicrystal brings profound new ideas to the traditional condensed matter physics, its elastic equations are more complicated than that of traditional crystal. A contact problem of decagonal two? dimensional quasicrystal material under the action of a rigid flat die is solved satisfactorily by introducing displacement function and using Fourier analysis and dual integral equations theory, and the analytical expressions of stress and displacement fields of the contact problem are achieved. The results show that if the contact displacement is a constant in the contact zone, the vertical contact stress has order -1/2 singularity on the edge of contact zone, which provides the important mechanics parameter for contact deformation of the quasicrystal.
基金supported by the National Hi-Tech Research and Development Program (863) of China (No.2007AA06A405, 2005AA6010100401)
文摘Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi Lake, China, a two-dimensional water quality model was developed in the research. The hydrodynamics module was numerically solved by the alternating direction iteration （ADI） method. The parameters of the water quality module were obtained through the in situ experiments and the laboratory analyses that were conducted from 2006 to 2007. The model was calibrated and verified by the observation data in 2007. Among the four modelled key variables, i.e., water level, COD （in CODcr）, NH4＋-N and PO43-P the minimum value of the coefficient of determination （COD） was 0.69, indicating the model performed reasonably well. The developed model was then applied to simulate the water quality changes at a downstream cross-section assuming that the designed restoration programs were implemented. According to the simulated results, the restoration programs could cut down the loads of COD and PO43-P about 15%. Such a load reduction, unfortunately, would have very little effect on the NH4^＋-N removal. Moreover, the water quality at the outlet cross-section would be still in class V （3838-02）, indicating more measures should be taken to further reduce the loads. The study demonstrated the capability of water quality models to support aquatic ecosystem restorations.
基金Supported by the National Natural Science Foundation of China(Grant No.90815014,50608024)Opening Laboratory of Earthquake Engineering and Engineering Vibration Foundation(Grant No.2007001)Opening Laboratory of Seismic Control and Structural Safety Foundation(Grant No.0808)
文摘For the evaluation of structures with known ductility demands,the constant-ductility displacement ratio spectra(CDDRS) are particularly useful for providing inelastic displacement ratios to estimate maximum lateral inelastic displacement demands from maximum elastic displacement demands.The CDDRS are computed for single-degree-of-freedom systems(SDOF) by considering or ignoring P-Δ effect for different ductility levels when subjected to 344 earthquake ground motions recorded in four site classes.The modified expressions of CDDRS for P-Δ effect are proposed.It is concluded that the P-Δ effect on CDDRS is significant,and the effect increases with the increase of ductility level.In the long-period region,the CDDRS ignoring P-Δ effect almost conforms to the equal-displacement rule.But in the case of higher ductility level,the CDDRS considering P-Δ effect are much higher than 1.0,which do not conform to the equal-displacement rule.
文摘A direction-of-arrival （DOA） estimation algorithm based on direct data domain （D3） approach is presented. This method can accuracy estimate DOA using one snapshot modified data, called the temporal and spatial two-dimensional vector reconstruction （TSR） method. The key idea is to apply the D3 approach which can extract the signal of given frequency but null out other frequency signals in temporal domain. Then the spatial vector reconstruction processing is used to estimate the angle of the spatial coherent signal source based on extract signal data. Compared with the common temporal and spatial processing approach, the TSR method has a lower computational load, higher real-time performance, robustness and angular accuracy of DOA. The proposed algorithm can be directly applied to the phased array radar of coherent pulses. Simulation results demonstrate the performance of the proposed technique.
基金supported by the National Natural Science Foundation of China(Grant No.52109156)the Science and Technology Project of the Jiangxi Provincial Education Department(Grant No.GJJ190970).
文摘Traditional methods for early warning of dam displacements usually assume that residual displacements follow a normal distribution.This assumption deviates from the reality,thereby affecting the reliability of early warning results and leading to misjudgments of dam displacement behavior.To solve this problem,this study proposed an early warning method using a non-normal distribution function.A new early warning index was developed using cumulative distribution function(CDF)values.The method of kernel density estimation was used to calculate the CDF values of residual displacements at a single point.The copula function was used to compute the CDF values of residual displacements at multiple points.Numerical results showed that,with residual displacements in a non-normal distribution,the early warning method proposed in this study accurately reflected the dam displacement behavior and effectively reduced the frequency of false alarms.This method is expected to aid in the safe operation of dams.
基金the National Natural Science Foundation of China (Nos. 11572289,1171407,11702252,and 11902293)the China Postdoctoral Science Foundation (No. 2019M652563)。
文摘The interface crack problems in the two-dimensional(2D)decagonal quasicrystal(QC)coating are theoretically and numerically investigated with a displacement discontinuity method.The 2D general solution is obtained based on the potential theory.An analogy method is proposed based on the relationship between the general solutions for 2D decagonal and one-dimensional(1D)hexagonal QCs.According to the analogy method,the fundamental solutions of concentrated point phonon displacement discontinuities are obtained on the interface.By using the superposition principle,the hypersingular boundary integral-differential equations in terms of displacement discontinuities are determined for a line interface crack.Further,Green’s functions are found for uniform displacement discontinuities on a line element.The oscillatory singularity near a crack tip is eliminated by adopting the Gaussian distribution to approximate the delta function.The stress intensity factors(SIFs)with ordinary singularity and the energy release rate(ERR)are derived.Finally,a boundary element method is put forward to investigate the effects of different factors on the fracture.
基金This work is supported by the National Natural Science Foundation of China(11661058,11761053)the Natural Science Foundation of Inner Mongolia(2017MS0107)the Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region(NJYT-17-A07).
文摘In this article,some high-order local discontinuous Galerkin(LDG)schemes based on some second-order θ approximation formulas in time are presented to solve a two-dimen-sional nonlinear fractional diffusion equation.The unconditional stability of the LDG scheme is proved,and an a priori error estimate with O(h^(k+1)+At^(2))is derived,where k≥0 denotes the index of the basis function.Extensive numerical results with Q^(k)(k=0,1,2,3)elements are provided to confirm our theoretical results,which also show that the second-order convergence rate in time is not impacted by the changed parameter θ.
文摘In this paper, we consider the initial-boundary value problem of two-dimensional first-order linear hyperbolic equation with variable coefficients. By using the upwind difference method to discretize the spatial derivative term and the forward and backward Euler method to discretize the time derivative term, the explicit and implicit upwind difference schemes are obtained respectively. It is proved that the explicit upwind scheme is conditionally stable and the implicit upwind scheme is unconditionally stable. Then the convergence of the schemes is derived. Numerical examples verify the results of theoretical analysis.
文摘Compressible miscible displacement of one fluid by another in porous media is modelled by a nonlinear parabolic system. A finite element procedure is introduced to approximate the concentration of one fluid and the pressure of the mixture. The concentration is treated by a Galerkin method while the pressure is treated by a parabolic mixed finite element method. The effect of dispersion, which is neglected in [1], is considered. Optimal order estimates in L2 are derived for the errors in the approximate solutions.
基金Foundationitem Project (49904001) supported by the National Natural Science Foundation of China .
文摘To guarantee the safety and the quality of the deep pit construction of a high building, it is necessary to monitor the deformation of the supporting structure of the pit. At present, there are mainly two methods to monitor the geometric deformation of the supporting structure of the pit. One is to monitor the displacements of the tops of the piles; the other is to monitor the deep displacements of the piles. Based on the analysis of the characteristics of both the top monitoring data and the deep monitoring data, a united data processing method was put forward. A model of conicoid fitting model was chosen to describe the deformation surface of the pit, and then the robust estimation was adopted to avoid the influence of the gross errors existing in the observations. It was proved effective and accurate to analyze the deformation of the monitoring surface with this method. The steps of the method were concluded in detail.
基金supported by the Major State Basic Research Development Program of China(No.G19990328)the National Key Technologies R&D Program of China (No.20050200069)+1 种基金the National Natural Science Foundation of China (Nos.10771124 and 10372052)the Ph. D. Pro-grams Foundation of Ministry of Education of China (No.20030422047)
文摘The research of the miscible oil and water displacement problem with moving boundary values is of great value to the history of oil-gas transport and accumulation in the basin evolution as well as to the rational evaluation in prospecting and exploiting oil-gas resources. The mathematical model can be described as a coupled system of nonlinear partial differential equations with moving boundary values. For the twodimensional bounded region, the upwind finite difference schemes are proposed. Some techniques, such as the calculus of variations, the change of variables, and the theory of a priori estimates, are used. The optimal orderl2-norm estimates are derived for the errors in the approximate solutions. The research is important both theoretically and practically for the model analysis in the field, the model numerical method, and the software development.
基金Supported by the National Natural Science Foundation of China.
文摘A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation for the model is carried out with methane-air-5A molecularsieve in a bed under the condition of step injection of tracer from a point on the main axis of thebed by the curve fitting method in the time domain.
基金the Major State Basic Research Program of China(19990328)NNSF of China(19871051,19972039) the Doctorate Foundation of the State Education Commission
文摘For compressible two-phase displacement problem, a kind of upwind operator splitting finite difference schemes is put forward and make use of operator splitting, of calculus of variations, multiplicative commutation rule of difference operators, decomposition of high order difference operators and prior estimates are adopted. Optimal order estimates in L 2 norm are derived to determine the error, in the approximate solution.
基金supported by the Natural Sciences and Engineering Research Council of Canada through their Research Tools and Instruments and Fellowship programsthe Graduate Fellowship program by the University of California, Los Angeles。
文摘In post-earthquake surveys,it is difficult(and often infeasible)to observe and quantify displacements beyond line-of-sight(LOS),given seismic force-resisting and gravity systems exist completely or partially within a building′s enclosure.To overcome this limitation,we develop a novel framework that generalizes graph-based state estimation towards structural joint localization via engineered landmarks.These landmarks provide an indirect means to estimate residual displacements where direct LOS is unavailable.Within our framework,engineered landmarks define topologies of uniquely identifiable landmarks that are either visible or non-visible to a robot performing simultaneous localization and mapping(SLAM).Within the SLAM approach,factors encoding robot odometry and robot-to-visible landmark measurements are formulated for the cases of wireless sensing and fiducial object detection and tracking.Visible landmarks are rigidly attached to non-visible landmark subsets for each engineered landmark,where the complete set of non-visible landmarks form globally rigid and localizable connectivity graphs via range-based factors.Complimentary subsets of non-visible landmarks are embedded within the base structure and uniquely define joint pose via geometric factors.All factors are unified within a common graph to solve for the maximum a posteriori estimate of robot,landmark,and joint states via nonlinear least squares optimization.To demonstrate the applicability of our approach,we apply the Monte Carlo method over a parameterization of system noise to calculate residual joint pose error distributions,maximum average inter-story drift ratios,and related summary statistics for a 19-story nonlinear structural model.By performing nonlinear time history analyses over sets of service-level and maximum considered earthquakes,our parametric study gives insight into our method′s application towards post-earthquake building evaluation in non-LOS conditions.
基金Project supported by the National Natural Science Foundation of China (Nos. 10871075 and 10926101)the Natural Science Foundation of Guangdong Province of China(Nos. 9451064201003736 and 9151064201000040)
文摘A class of periodic initial value problems for two-dimensional Newton- Boussinesq equations are investigated in this paper. The Newton-Boussinesq equations are turned into the equivalent integral equations. With iteration methods, the local existence of the solutions is obtained. Using the method of a priori estimates, the global existence of the solution is proved.
