In contrast to the exploration of novel photocatalytic materials,vacancy engineering of traditionalphotocatalysts comprising earth‐abundant elements represents an effective method for enhancingphotocatalytic performa...In contrast to the exploration of novel photocatalytic materials,vacancy engineering of traditionalphotocatalysts comprising earth‐abundant elements represents an effective method for enhancingphotocatalytic performance without introducing alien elements.This minireview analyzes the latestprogress in engineering vacancies in photocatalysts,remarks on state‐of‐the‐art characterizationtechniques for vacancies,and reviews the formation chemistry and fundamental benefits of anionand cation vacancies in typical photocatalysts.Although knowledge of these vacancies is increasing,challenges remain in this field,and possible further research is therefore also discussed.展开更多
In order to realize the photocatalysis of TiO2 in the sunlight and directly apply it to waste water treatment, the Gd-doped TiO2 nanofibre was synthesized using two-step synthesis method as follows: Firstly, potassium...In order to realize the photocatalysis of TiO2 in the sunlight and directly apply it to waste water treatment, the Gd-doped TiO2 nanofibre was synthesized using two-step synthesis method as follows: Firstly, potassium carbonate, titanium dioxide and proper gadolinium oxide （dopant） were calcined in the muffle at high temperature and the doped gadolinium K2Ti4O9 fibres were obtained; secondly, the fibre was heated using glycerol as solvent until Gd-doped TiO2 nanofibres were obtained. The synthesized samples were characterized using scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The results show that Gd-doped TiO2 nanofibre heat-treated by glycerol solvent can inhibit the agglomeration, so the grain diameter of the fibre is smaller than that without heat-treated with glycerol. Meanwhile, the diameter of the fibre decreases with the increase of the heating temperature and time. 97% 98% of Gd-doped TiO2 nanofibre is anatase. The photocatalysis results showed that the photocatalysis activity of Gd-doped TiO2 nanofibre is just a little lower than that of TiO2 powder.展开更多
The investigation of the performance of UV/H2O2, UV/O3 and UV/H2O2/O3 oxidation systems treating spent caustic from an ethylene plant shows that in UV/H2O2 system, with the increase of H2O2dosage, removal efficiencies...The investigation of the performance of UV/H2O2, UV/O3 and UV/H2O2/O3 oxidation systems treating spent caustic from an ethylene plant shows that in UV/H2O2 system, with the increase of H2O2dosage, removal efficiencies of COD and the ratio of biochemical oxygen demand （BOD） to chemical oxygen demand （COD） of the effluent were increased and a better performance was obtained than the H2O2system alone. In UV/H2O2 system, removal efficiency of COD reached 68% under the optimum condition, and BOD/COD ratio was significantly increased from 0.22 to 0.52. In UV/O3 system, with the increase of O3dosage, removal efficiency of COD and BOD/COD ratio were increased, and a better performance was obtained than the O3system alone. Under the optimum condition, removal efficiency of COD was 54%, and BOD/COD ratio was significantly increased from 0.22 to 0.48. In UV/H2O2/O3 system, COD removal efficiency was found to be 22.0% higher than UV/O3 system.展开更多
基金supported by the National Natural Science Foundation of China (21377084)Special Fund for Agro-scientific Research in the Public Interest (201503107)~~
文摘In contrast to the exploration of novel photocatalytic materials,vacancy engineering of traditionalphotocatalysts comprising earth‐abundant elements represents an effective method for enhancingphotocatalytic performance without introducing alien elements.This minireview analyzes the latestprogress in engineering vacancies in photocatalysts,remarks on state‐of‐the‐art characterizationtechniques for vacancies,and reviews the formation chemistry and fundamental benefits of anionand cation vacancies in typical photocatalysts.Although knowledge of these vacancies is increasing,challenges remain in this field,and possible further research is therefore also discussed.
文摘In order to realize the photocatalysis of TiO2 in the sunlight and directly apply it to waste water treatment, the Gd-doped TiO2 nanofibre was synthesized using two-step synthesis method as follows: Firstly, potassium carbonate, titanium dioxide and proper gadolinium oxide （dopant） were calcined in the muffle at high temperature and the doped gadolinium K2Ti4O9 fibres were obtained; secondly, the fibre was heated using glycerol as solvent until Gd-doped TiO2 nanofibres were obtained. The synthesized samples were characterized using scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The results show that Gd-doped TiO2 nanofibre heat-treated by glycerol solvent can inhibit the agglomeration, so the grain diameter of the fibre is smaller than that without heat-treated with glycerol. Meanwhile, the diameter of the fibre decreases with the increase of the heating temperature and time. 97% 98% of Gd-doped TiO2 nanofibre is anatase. The photocatalysis results showed that the photocatalysis activity of Gd-doped TiO2 nanofibre is just a little lower than that of TiO2 powder.
文摘The investigation of the performance of UV/H2O2, UV/O3 and UV/H2O2/O3 oxidation systems treating spent caustic from an ethylene plant shows that in UV/H2O2 system, with the increase of H2O2dosage, removal efficiencies of COD and the ratio of biochemical oxygen demand （BOD） to chemical oxygen demand （COD） of the effluent were increased and a better performance was obtained than the H2O2system alone. In UV/H2O2 system, removal efficiency of COD reached 68% under the optimum condition, and BOD/COD ratio was significantly increased from 0.22 to 0.52. In UV/O3 system, with the increase of O3dosage, removal efficiency of COD and BOD/COD ratio were increased, and a better performance was obtained than the O3system alone. Under the optimum condition, removal efficiency of COD was 54%, and BOD/COD ratio was significantly increased from 0.22 to 0.48. In UV/H2O2/O3 system, COD removal efficiency was found to be 22.0% higher than UV/O3 system.
