The development of a high performance wideband radio frequency （RF） transceiver used in the next generation mobile communication system is presented. The developed RF transceiver operates in the 6 to 6.3 GHz band an...The development of a high performance wideband radio frequency （RF） transceiver used in the next generation mobile communication system is presented. The developed RF transceiver operates in the 6 to 6.3 GHz band and the channel bandwidth is up to 100 MHz. It operates in the time division duplex （TDD） mode and supports the multiple-input multipleoutput （MIMO） technique for the international mobile telecommunications （IMT）-advanced systems. The classical superheterodyne scheme is employed to achieve optimal performance. Design issues of the essential components such as low noise amplifier, power amplifier and local oscillators are described in detail. Measurement results show that the maximum linear output power of the RF transceiver is above 23 dBm, and the gain and noise figure of the low noise amplifier is around 24 dB and below 1 dB, respectively. Furthermore, the error vector magnitude （EVM） measurement shows that the performance of the developed RF transceiver is well beyond the requirements of the long term evolution （LTE）-advanced system. With up to 8 x 8 MIMO configuration, the RF transceiver supports more than a 1 Gbit/s data rate in field tests.展开更多
Aimed at that only one form of channel statistic information is utilized in traditional robust precoder schemes: either the channel mean or the transmit antenna correlation in multiple-input multiple-output (MIMO) wir...Aimed at that only one form of channel statistic information is utilized in traditional robust precoder schemes: either the channel mean or the transmit antenna correlation in multiple-input multiple-output (MIMO) wireless system, this paper proposes robust precoder designs which exploit both of statistic information to minimize the equalization mean-square error (MSE) with power constraint. Two different power constraints are studied. Besides the usual sum power constraint over all antennas, the per-antenna power constraint is imposed at transmitter in this paper. Since each antenna has its own amplifier, individual power constraint on each antenna is more realistic. Especially in MIMO-OFDM systems, the Peak-to-Average Ratio (PAR) is one of main practical problems. Simulations show that the proposed schemes have better performance than traditional normalized zero forcing schemes for imperfectly known correlated channel. Moreover, per-antenna power constraint can efficiently decrease the demand of dynamic range of power amplifier on each transmit antenna, especially in MIMO-OFDM systems.展开更多
For digital channelized frequency division multiple access based satellite communication(SATCOM) systems,it is a challenging but critical issue to improve the transponder power and spectrum efficiency simultaneously u...For digital channelized frequency division multiple access based satellite communication(SATCOM) systems,it is a challenging but critical issue to improve the transponder power and spectrum efficiency simultaneously under limited and non-linear high-power amplifier conditions.In this paper,different from the traditional link supportability designs aiming at minimizing the total transponder output power,a maximal sum Shannon capacity optimization objective is firstly raised subject to link supportability constraints.Furthermore,an efficient multilevel optimization(MO) algorithm is proposed to solve the considered optimization problem in the case of single link for each terminal.Moreover,in the case of multiple links for one terminal,an improved MO algorithm involving Golden section and discrete gradient searching procedures is proposed to optimize power allocation over all links.Finally,several numerical results are provided to demonstrate the effectiveness of our proposals.Comparison results show that,by the MO algorithm,not only all links' supportability can be guaranteed but also a larger sum capacity can be achieved with lower complexity.展开更多
In this paper,a portable 2.42 GHz transmitter for wireless communication systems,with 8dBm output power and small size is proposed.Several novel features exist in this transmitter.First,power consumption and output ar...In this paper,a portable 2.42 GHz transmitter for wireless communication systems,with 8dBm output power and small size is proposed.Several novel features exist in this transmitter.First,power consumption and output are balanced by introducing a differential oscillator with input signal controlled biasing,which acts as both a carrier generator and an OOK modulator.Then,power consumption of the transmitter is reduced by the OOK modulated signal via switching the oscillator and the power amplifier at the same time.Furthermore,the area size is also reduced by a class-AB power amplifier,which uses the PCB antenna as the resonance inductance.With these features,the total chip area is reduced to 670μm×740μm(In a 0.18μm CMOS process).展开更多
For a single-relay amplify-and-forward (AF) non-cooperative system,an optimal power proportionbetween source and relay is considered.Aiming to minimize end-to-end bit error rate (BER) and maximizeattainable rate,both ...For a single-relay amplify-and-forward (AF) non-cooperative system,an optimal power proportionbetween source and relay is considered.Aiming to minimize end-to-end bit error rate (BER) and maximizeattainable rate,both large-scale path loss and small-scale Rayleigh fading are taken into account.Aclosed form expression to allocate power in optimal proportion at source is obtained.Simulation resultsshow that the proposed scheme to distribute power can minimize BER under any channel conditions.展开更多
基金The National Natural Science Foundation of China (No.60702027,60921063)the National Basic Research Program of China(973 Program)(No.2010CB327400)the National Science and Technology Major Project of Ministry of Science and Technology of China(No.2010ZX03007-001-01,2011ZX03004-001)
文摘The development of a high performance wideband radio frequency （RF） transceiver used in the next generation mobile communication system is presented. The developed RF transceiver operates in the 6 to 6.3 GHz band and the channel bandwidth is up to 100 MHz. It operates in the time division duplex （TDD） mode and supports the multiple-input multipleoutput （MIMO） technique for the international mobile telecommunications （IMT）-advanced systems. The classical superheterodyne scheme is employed to achieve optimal performance. Design issues of the essential components such as low noise amplifier, power amplifier and local oscillators are described in detail. Measurement results show that the maximum linear output power of the RF transceiver is above 23 dBm, and the gain and noise figure of the low noise amplifier is around 24 dB and below 1 dB, respectively. Furthermore, the error vector magnitude （EVM） measurement shows that the performance of the developed RF transceiver is well beyond the requirements of the long term evolution （LTE）-advanced system. With up to 8 x 8 MIMO configuration, the RF transceiver supports more than a 1 Gbit/s data rate in field tests.
基金Sponsored by the National Natural Science Foundation of China(Grant No.60572120)
文摘Aimed at that only one form of channel statistic information is utilized in traditional robust precoder schemes: either the channel mean or the transmit antenna correlation in multiple-input multiple-output (MIMO) wireless system, this paper proposes robust precoder designs which exploit both of statistic information to minimize the equalization mean-square error (MSE) with power constraint. Two different power constraints are studied. Besides the usual sum power constraint over all antennas, the per-antenna power constraint is imposed at transmitter in this paper. Since each antenna has its own amplifier, individual power constraint on each antenna is more realistic. Especially in MIMO-OFDM systems, the Peak-to-Average Ratio (PAR) is one of main practical problems. Simulations show that the proposed schemes have better performance than traditional normalized zero forcing schemes for imperfectly known correlated channel. Moreover, per-antenna power constraint can efficiently decrease the demand of dynamic range of power amplifier on each transmit antenna, especially in MIMO-OFDM systems.
基金supportedin part by Natural Science Foundation under grant No.91338108,91438206Co-innovation Laboratory of Aerospace Broadband Network Technology
文摘For digital channelized frequency division multiple access based satellite communication(SATCOM) systems,it is a challenging but critical issue to improve the transponder power and spectrum efficiency simultaneously under limited and non-linear high-power amplifier conditions.In this paper,different from the traditional link supportability designs aiming at minimizing the total transponder output power,a maximal sum Shannon capacity optimization objective is firstly raised subject to link supportability constraints.Furthermore,an efficient multilevel optimization(MO) algorithm is proposed to solve the considered optimization problem in the case of single link for each terminal.Moreover,in the case of multiple links for one terminal,an improved MO algorithm involving Golden section and discrete gradient searching procedures is proposed to optimize power allocation over all links.Finally,several numerical results are provided to demonstrate the effectiveness of our proposals.Comparison results show that,by the MO algorithm,not only all links' supportability can be guaranteed but also a larger sum capacity can be achieved with lower complexity.
基金Supported by the National Natural Science Foundation of China(No.61072010)
文摘In this paper,a portable 2.42 GHz transmitter for wireless communication systems,with 8dBm output power and small size is proposed.Several novel features exist in this transmitter.First,power consumption and output are balanced by introducing a differential oscillator with input signal controlled biasing,which acts as both a carrier generator and an OOK modulator.Then,power consumption of the transmitter is reduced by the OOK modulated signal via switching the oscillator and the power amplifier at the same time.Furthermore,the area size is also reduced by a class-AB power amplifier,which uses the PCB antenna as the resonance inductance.With these features,the total chip area is reduced to 670μm×740μm(In a 0.18μm CMOS process).
基金Supported by the National High Technology Research and Development Progranmme of China (No. 2009AA01Z246,2009AA01Z211 )
文摘For a single-relay amplify-and-forward (AF) non-cooperative system,an optimal power proportionbetween source and relay is considered.Aiming to minimize end-to-end bit error rate (BER) and maximizeattainable rate,both large-scale path loss and small-scale Rayleigh fading are taken into account.Aclosed form expression to allocate power in optimal proportion at source is obtained.Simulation resultsshow that the proposed scheme to distribute power can minimize BER under any channel conditions.
