Test results of reducing two stroke motorcycle emissions with new type carburettors and electronic fuel injection systems are presented. Analyses and comparison between different systems are discussed. The adoption o...Test results of reducing two stroke motorcycle emissions with new type carburettors and electronic fuel injection systems are presented. Analyses and comparison between different systems are discussed. The adoption of electronically controlled injection and corresponding electronic control technique is an effective measure of prolonged vitality to improve emissions from two stroke motorcycles. Suggestions about the strategic steps of China′s motorcycle emission control are proposed.展开更多
This paper presents a simulator model of a marine diesel engine based on physical, semi-physical, mathematical and thermodynamic equations, which allows fast predictive simulations The whole engine system is divided i...This paper presents a simulator model of a marine diesel engine based on physical, semi-physical, mathematical and thermodynamic equations, which allows fast predictive simulations The whole engine system is divided into several functional blocks： cooling, lubrication, air, injection, combustion and emissions. The sub-models and dynamic characteristics of individual blocks are established according to engine working principles equations and experimental data collected from a marine diesel engine test bench for SIMB Company under the reference 6M26SRP1. The overall engine system dynamics is expressed as a set of simultaneous algebraic and differential equations using sub-blocks and S-Functions of Matlab/Simulink. The simulation of this model, implemented on Matlab/Simulink has been validated and can be used to obtain engine performance, pressure, temperature, efficiency, heat release, crank angle, fuel rate, emissions at different sub-blocks. The simulator will be used, in future work, to study the engine performance in faulty conditions, and can be used to assist marine engineers in fault diagnosis and estimation （FDI） as well as designers to predict the behavior of the cooling system, lubrication system, injection system, combustion, emissions, in order to optimize the dimensions of different components. This program is a platform for fault simulator, to investigate the impact on sub-blocks engine＇s output of changing values for faults parameters such as： faulty fuel injector, leaky cylinder, worn fuel pump, broken piston rings, a dirty turbocharger, dirty air filter, dirty air cooler, air leakage, water leakage, oil leakage and contamination, fouling of heat exchanger, pumps wear, failure of injectors （and many others）.展开更多
According to the conductivity test results,it is found that oil conductivity increases with an increasing additive content,and the turbidity of engine oil is also augmented with an increasing additive content.After te...According to the conductivity test results,it is found that oil conductivity increases with an increasing additive content,and the turbidity of engine oil is also augmented with an increasing additive content.After testing the turbidity and stability of oils containing the typical conventional calcium sulfonate,the overbased calcium sulfonate and the mixture of the above two calcium sulfonates,the results show that at the same amount of additives used,the oil with a higher turbidity demonstrated a worse stability.A nonionic dispersant that was added into lube oils at a definite concentration could improve the detergent compatibility.For this reason,the sediment volume in three kinds of oils all decreased obviously,resulting in successful improvement of storage stability of marine engine oils.展开更多
Due to high price of Straight Vegetable Oil （SVO） for bio-diesel production, the use of Waste Cooking Oil （WCO） will be cost effective. Furthermore, utilization of WCO will refrain waterways pollution and endanger...Due to high price of Straight Vegetable Oil （SVO） for bio-diesel production, the use of Waste Cooking Oil （WCO） will be cost effective. Furthermore, utilization of WCO will refrain waterways pollution and endanger ecosystem. In Malaysia, more than 50-tone of WCO from various sources was produced every day. This study evaluates combustion performance and exhaust emission characteristics of several WCOs with different sources. Modification on fuel properties has been done to improve the combustion and exhaust emission of using WCO as diesel fuel. Regular diesel fuel also has been used for comparison in the test. A 0.6 liter, single-cylinder, air-cooled direct injection diesel engine was used to perform this experiment. Experiment was done at variable engine loads at constant speed.展开更多
Producer gas through gasification of biomass can be used as an alternate fuel in rural areas due to high potential of biomass resources in India.Experiments were conducted to study the performance of a diesel engine(f...Producer gas through gasification of biomass can be used as an alternate fuel in rural areas due to high potential of biomass resources in India.Experiments were conducted to study the performance of a diesel engine(four stroke,single cylinder,5.25 kW) with respect to its thermal efficiency,specific fuel consumption and diesel substitution by use of diesel alone and producer gas-cum-diesel(dual fuel mode).Three types of biomass,i.e.wood chips,pigeon pea stalks and corn cobs were used for generation of producer gas.A producer gas system consisting of a downdraft gasifier,a cooling cum cleaning unit,a filtering unit and a gas air mixing device was designed,fabricated and used to power a 5.25 kW diesel engine on dual fuel mode.Performance of the engine was reported by keeping biomass moisture contents as 8%,12%,16%,and 21%,engine speed as 1 600 r/min and with variable engine loads.The average value of thermal efficiency on dual fuel mode was found slightly lower than that of diesel mode.The specific diesel consumption was found to be 60%-64% less in dual fuel mode than that in diesel mode for the same amount of energy output.The average diesel substitution of 74% was observed with wood chips followed by corn cobs(78%) and pigeon pea stalks(82%).Based on the performance studied,the producer gas may be used as a substitute or as supplementary fuel for diesel conservation,particularly for stationary engines in agricultural operations in the farm.展开更多
The effectiveness of adsorptive treatment of waste cooking oils was assessed in terms of suitability for biodiesel production. New technologies involving standard diesel engines have been developed using biofuel produ...The effectiveness of adsorptive treatment of waste cooking oils was assessed in terms of suitability for biodiesel production. New technologies involving standard diesel engines have been developed using biofuel products from vegetable oils and waste animal fats based on environmental and economic considerations. The potential application of used rapeseed oil after treatment with a mixture of active carbon （AR） and magnesium silicate （MG） as energy source was studied. The results were compared with substrates standard in the Vogel＆Noot GmbH technology for the transesterification of oils and fats.展开更多
The article describes an electronic database of selected marine piston combustion engines created for diagnostic purposes. The database was made for vessels of the biggest Polish shipowner. It is used for archiving an...The article describes an electronic database of selected marine piston combustion engines created for diagnostic purposes. The database was made for vessels of the biggest Polish shipowner. It is used for archiving and comparing measured parameters of diagnosed engines with model parameters. To facilitate the search for and use of required data, they have been collected and catalogued. For this purpose the database has been prepared by using a computer program included in the Microsoft Office suite. The database search relies on the details concerning the type of vessel. The fields displayed include such items as the year and place of construction, the parameters of the ship, flag, etc.. For each vessel special forms are available for main and auxiliary engines, enabling easy and quick check of the necessary parameters during operation of the engine. The database contains parameters of the main propulsion and auxiliary engines, as well as model characteristics to help determine the diagnostics, prognosis and genesis.展开更多
Energy and environmental sustainability are important considerations for increased rice production. This study examined the energy utilization and sustainability of rice processing in sub-Saharan Africa. The community...Energy and environmental sustainability are important considerations for increased rice production. This study examined the energy utilization and sustainability of rice processing in sub-Saharan Africa. The community of Gadan Loko village in the song local government of Adamawa State, Nigeria was selected as the focus of study. Rice parboiling, the most energy intensive process in rice processing is carried out usually by women in small quantities of about 13.2 kg using traditional pots on tripod support stoves. The parboiled rice is sun dried on mats before it is taken to the milling stalls where it is milled using milling machines driven by single cylinder diesel engines. There were large variations in the quality of milled rice due to lack of consistency in processing parameters. Accumulation of rice husk in the community created important environmental issues. In this study, methods of improving sustainability of rice processing were investigated. The areas included： the utilization of waste heat from the diesel engines for improved drying and efficient pre-soaking; the utilization of solar energy for pre-soaking; the utilization of rice husks as alternative fuel to firewood; and the optimization and redesign of the stoves and parboiling vessels to minimize heat loss to the environment. The results showed that the utilization of rice husk as alternative fuel and the redesign of the stoves and parboiling vessels will increase the sustainability of rice processing and can be easily adopted by the community. While solar energy pre-soaking was not economical and the utilization of waste heat from the diesel engines for drying and pre-soaking would be difficult to implement at the rural scale, because most of the parboiling is done far away from the milling stalls. The study showed that research, development of appropriate technology, and education （RATE） of the rural community is an important way of increasing sustainability.展开更多
In this paper, experimental investigations are presented to assess the performance variations in a single cylinder spark ignited engine when run with three different gasoline-alcohol blends： （88% gasoline-12% methan...In this paper, experimental investigations are presented to assess the performance variations in a single cylinder spark ignited engine when run with three different gasoline-alcohol blends： （88% gasoline-12% methanol, 88% gasoline-12% ethanol and 88% gasoline-6% methanol-6% ethanol）. Additional tests are carried out with the basic gasoline fuel for comparison analysis and performance assessment. Engine performance is investigated under a variety of engine operating conditions. The results are presented in the domain of engine speed. In particular, the brake power of the engine is shown to be slightly increased. The brake thermal efficiency showed an increase compared with the basic gasoline engine. Similarly, it is shown that brake specific fuel consumption is enhanced compared with basic gasoline engine. The exhaust gas temperature showed a decrease compared with gasoline fuel which is preferable to reduce emissions. The alcohol additives are strongly recommended to enhance performance, increasing the mileage and reducing the emissions.展开更多
文摘Test results of reducing two stroke motorcycle emissions with new type carburettors and electronic fuel injection systems are presented. Analyses and comparison between different systems are discussed. The adoption of electronically controlled injection and corresponding electronic control technique is an effective measure of prolonged vitality to improve emissions from two stroke motorcycles. Suggestions about the strategic steps of China′s motorcycle emission control are proposed.
文摘This paper presents a simulator model of a marine diesel engine based on physical, semi-physical, mathematical and thermodynamic equations, which allows fast predictive simulations The whole engine system is divided into several functional blocks： cooling, lubrication, air, injection, combustion and emissions. The sub-models and dynamic characteristics of individual blocks are established according to engine working principles equations and experimental data collected from a marine diesel engine test bench for SIMB Company under the reference 6M26SRP1. The overall engine system dynamics is expressed as a set of simultaneous algebraic and differential equations using sub-blocks and S-Functions of Matlab/Simulink. The simulation of this model, implemented on Matlab/Simulink has been validated and can be used to obtain engine performance, pressure, temperature, efficiency, heat release, crank angle, fuel rate, emissions at different sub-blocks. The simulator will be used, in future work, to study the engine performance in faulty conditions, and can be used to assist marine engineers in fault diagnosis and estimation （FDI） as well as designers to predict the behavior of the cooling system, lubrication system, injection system, combustion, emissions, in order to optimize the dimensions of different components. This program is a platform for fault simulator, to investigate the impact on sub-blocks engine＇s output of changing values for faults parameters such as： faulty fuel injector, leaky cylinder, worn fuel pump, broken piston rings, a dirty turbocharger, dirty air filter, dirty air cooler, air leakage, water leakage, oil leakage and contamination, fouling of heat exchanger, pumps wear, failure of injectors （and many others）.
文摘According to the conductivity test results,it is found that oil conductivity increases with an increasing additive content,and the turbidity of engine oil is also augmented with an increasing additive content.After testing the turbidity and stability of oils containing the typical conventional calcium sulfonate,the overbased calcium sulfonate and the mixture of the above two calcium sulfonates,the results show that at the same amount of additives used,the oil with a higher turbidity demonstrated a worse stability.A nonionic dispersant that was added into lube oils at a definite concentration could improve the detergent compatibility.For this reason,the sediment volume in three kinds of oils all decreased obviously,resulting in successful improvement of storage stability of marine engine oils.
文摘Due to high price of Straight Vegetable Oil （SVO） for bio-diesel production, the use of Waste Cooking Oil （WCO） will be cost effective. Furthermore, utilization of WCO will refrain waterways pollution and endanger ecosystem. In Malaysia, more than 50-tone of WCO from various sources was produced every day. This study evaluates combustion performance and exhaust emission characteristics of several WCOs with different sources. Modification on fuel properties has been done to improve the combustion and exhaust emission of using WCO as diesel fuel. Regular diesel fuel also has been used for comparison in the test. A 0.6 liter, single-cylinder, air-cooled direct injection diesel engine was used to perform this experiment. Experiment was done at variable engine loads at constant speed.
文摘Producer gas through gasification of biomass can be used as an alternate fuel in rural areas due to high potential of biomass resources in India.Experiments were conducted to study the performance of a diesel engine(four stroke,single cylinder,5.25 kW) with respect to its thermal efficiency,specific fuel consumption and diesel substitution by use of diesel alone and producer gas-cum-diesel(dual fuel mode).Three types of biomass,i.e.wood chips,pigeon pea stalks and corn cobs were used for generation of producer gas.A producer gas system consisting of a downdraft gasifier,a cooling cum cleaning unit,a filtering unit and a gas air mixing device was designed,fabricated and used to power a 5.25 kW diesel engine on dual fuel mode.Performance of the engine was reported by keeping biomass moisture contents as 8%,12%,16%,and 21%,engine speed as 1 600 r/min and with variable engine loads.The average value of thermal efficiency on dual fuel mode was found slightly lower than that of diesel mode.The specific diesel consumption was found to be 60%-64% less in dual fuel mode than that in diesel mode for the same amount of energy output.The average diesel substitution of 74% was observed with wood chips followed by corn cobs(78%) and pigeon pea stalks(82%).Based on the performance studied,the producer gas may be used as a substitute or as supplementary fuel for diesel conservation,particularly for stationary engines in agricultural operations in the farm.
文摘The effectiveness of adsorptive treatment of waste cooking oils was assessed in terms of suitability for biodiesel production. New technologies involving standard diesel engines have been developed using biofuel products from vegetable oils and waste animal fats based on environmental and economic considerations. The potential application of used rapeseed oil after treatment with a mixture of active carbon （AR） and magnesium silicate （MG） as energy source was studied. The results were compared with substrates standard in the Vogel＆Noot GmbH technology for the transesterification of oils and fats.
文摘The article describes an electronic database of selected marine piston combustion engines created for diagnostic purposes. The database was made for vessels of the biggest Polish shipowner. It is used for archiving and comparing measured parameters of diagnosed engines with model parameters. To facilitate the search for and use of required data, they have been collected and catalogued. For this purpose the database has been prepared by using a computer program included in the Microsoft Office suite. The database search relies on the details concerning the type of vessel. The fields displayed include such items as the year and place of construction, the parameters of the ship, flag, etc.. For each vessel special forms are available for main and auxiliary engines, enabling easy and quick check of the necessary parameters during operation of the engine. The database contains parameters of the main propulsion and auxiliary engines, as well as model characteristics to help determine the diagnostics, prognosis and genesis.
文摘Energy and environmental sustainability are important considerations for increased rice production. This study examined the energy utilization and sustainability of rice processing in sub-Saharan Africa. The community of Gadan Loko village in the song local government of Adamawa State, Nigeria was selected as the focus of study. Rice parboiling, the most energy intensive process in rice processing is carried out usually by women in small quantities of about 13.2 kg using traditional pots on tripod support stoves. The parboiled rice is sun dried on mats before it is taken to the milling stalls where it is milled using milling machines driven by single cylinder diesel engines. There were large variations in the quality of milled rice due to lack of consistency in processing parameters. Accumulation of rice husk in the community created important environmental issues. In this study, methods of improving sustainability of rice processing were investigated. The areas included： the utilization of waste heat from the diesel engines for improved drying and efficient pre-soaking; the utilization of solar energy for pre-soaking; the utilization of rice husks as alternative fuel to firewood; and the optimization and redesign of the stoves and parboiling vessels to minimize heat loss to the environment. The results showed that the utilization of rice husk as alternative fuel and the redesign of the stoves and parboiling vessels will increase the sustainability of rice processing and can be easily adopted by the community. While solar energy pre-soaking was not economical and the utilization of waste heat from the diesel engines for drying and pre-soaking would be difficult to implement at the rural scale, because most of the parboiling is done far away from the milling stalls. The study showed that research, development of appropriate technology, and education （RATE） of the rural community is an important way of increasing sustainability.
文摘In this paper, experimental investigations are presented to assess the performance variations in a single cylinder spark ignited engine when run with three different gasoline-alcohol blends： （88% gasoline-12% methanol, 88% gasoline-12% ethanol and 88% gasoline-6% methanol-6% ethanol）. Additional tests are carried out with the basic gasoline fuel for comparison analysis and performance assessment. Engine performance is investigated under a variety of engine operating conditions. The results are presented in the domain of engine speed. In particular, the brake power of the engine is shown to be slightly increased. The brake thermal efficiency showed an increase compared with the basic gasoline engine. Similarly, it is shown that brake specific fuel consumption is enhanced compared with basic gasoline engine. The exhaust gas temperature showed a decrease compared with gasoline fuel which is preferable to reduce emissions. The alcohol additives are strongly recommended to enhance performance, increasing the mileage and reducing the emissions.
