期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
高压涡轮冷却叶片叶顶结构气动与传热 被引量:13
1
作者 虞跨海 杨茜 岳珠峰 《推进技术》 EI CAS CSCD 北大核心 2012年第2期174-178,共5页
开展了叶顶结构及间隙变化对高压涡轮冷却叶片气动与传热性能影响的研究,建立了四种不同叶顶结构的涡轮冷却叶片几何与数值分析模型,进行了高精度流热固耦合分析,得到了不同叶顶结构及间隙对涡轮冷却叶片气动与传热性能影响的数值分析... 开展了叶顶结构及间隙变化对高压涡轮冷却叶片气动与传热性能影响的研究,建立了四种不同叶顶结构的涡轮冷却叶片几何与数值分析模型,进行了高精度流热固耦合分析,得到了不同叶顶结构及间隙对涡轮冷却叶片气动与传热性能影响的数值分析结果。结果表明:不带射流孔叶片随着叶顶间隙的增大,总压损失增加;由于近壁面处存在的涡流,凹槽叶顶结构能够减少叶顶燃气泄漏,阻碍叶顶平面高温燃气的流动与热交换;叶顶射流孔冷却效果明显,能够大幅度降低叶顶平面温度。在相同叶顶间隙下,凹槽射流叶片具有最高的气动性能。 展开更多
关键词 涡轮冷却叶片 叶顶结构 凹槽叶顶 射流冷却 气动与传热
在线阅读 下载PDF
动叶叶顶结构对1.5级涡轮气动性能影响的数值研究 被引量:3
2
作者 张敏 刘艳 贺缨 《工程热物理学报》 EI CAS CSCD 北大核心 2018年第6期1235-1243,共9页
基于Lisa 1.5级涡轮,构造全围带、全周小翼及翼型围带动叶叶顶结构模型,并应用数值计算方法,分析不同动叶叶顶结构对涡轮气动性能的影响规律。结果表明,0.97%叶片高度叶顶间隙值下,全围带叶栅气动损失最小,翼型围带次之,2 mm全周小翼控... 基于Lisa 1.5级涡轮,构造全围带、全周小翼及翼型围带动叶叶顶结构模型,并应用数值计算方法,分析不同动叶叶顶结构对涡轮气动性能的影响规律。结果表明,0.97%叶片高度叶顶间隙值下,全围带叶栅气动损失最小,翼型围带次之,2 mm全周小翼控制损失的能力并不明显。此规律与涡轮平面叶栅研究中所得的结论相同。间隙增至1.38%叶片高度值时,间隙泄漏损失与总损失呈现等比例增加,表明此1.5级涡轮中气动损失主要来自于泄漏流动。最后,基于"Scaling"方法,分析不同叶顶结构对涡轮整级机械效率的影响。结果发现,三种叶顶结构均使效率得以提升。这进一步为翼型围带等叶顶结构的实际应用提供理论依据。 展开更多
关键词 间隙泄漏 叶顶结构 1.5级涡轮 气动性能 翼型围带
原文传递
燃气透平动叶不同叶顶结构对顶部泄漏流动和换热的影响 被引量:2
3
作者 李鹏 张超 刘建军 《热能动力工程》 CAS CSCD 北大核心 2012年第5期535-539,621,共5页
以某重型燃机透平第一级动叶为研究对象,数值模拟了平叶顶、凹槽、压力面肩壁和吸力面肩壁等4种不同叶顶结构对顶部泄漏流动和换热的影响。模拟结果表明,不同叶顶结构对叶顶间隙泄漏流动和叶顶附近吸力面侧压力分布影响较大。相比平叶... 以某重型燃机透平第一级动叶为研究对象,数值模拟了平叶顶、凹槽、压力面肩壁和吸力面肩壁等4种不同叶顶结构对顶部泄漏流动和换热的影响。模拟结果表明,不同叶顶结构对叶顶间隙泄漏流动和叶顶附近吸力面侧压力分布影响较大。相比平叶顶结构,凹槽结构和压力面肩壁结构减小了泄漏涡引起的总压损失,吸力面肩壁结构则使该损失增加。平叶顶结构具有最高的平均换热系数,吸力面肩壁结构的平均换热系数最低,约为平叶顶结构的70%。 展开更多
关键词 燃气透平 叶顶结构 泄漏流 顶部换热
原文传递
The Structure of Oryza Embryos and Their Dimorphic Cotyledons 被引量:2
4
作者 徐雪宾 刘向东 +2 位作者 章崇玲 吴万春 韩惠珍 《Acta Botanica Sinica》 CSCD 2002年第1期15-21,共7页
It has been generally held in botany that Oryza sativa L. is a monocotyledon. Based on studies of rice embryo development we confirmed that rice embryo has two dimorphic cotyledons rather than just one cotyledo... It has been generally held in botany that Oryza sativa L. is a monocotyledon. Based on studies of rice embryo development we confirmed that rice embryo has two dimorphic cotyledons rather than just one cotyledon. In the present study we attempt to know if the morphology of embryos in other species of Oryza differs from O. sativa and if these embryos have dimorphic cotyledon. Two types of embryo structures were observed in 22 species and/or subspecies of genus Oryza under the scanning electron microscope. Type 1, the O.sativa type, which is characterized by ventral scale and lateral scales, was found in 16 species. Type 2, the O. meyeriana (Zoll. et Mor. ex Steud.) Baill. ssp. tuberculata W. C. Wu et Y. G. Lu, G. C. Wang type, with no ventral scale and lateral scales, was found in 6 species and subspecies. The embryogenic process of O.sativa and O.meyeriana sub. tuberculata showed that the scutellum primordium, coleorhiza primordium, coleoptile primordium and shoot apical meristem directly differentiate from proembryo. The former two later develop into the embryo envelope, which is the outside cotyledon; the coleoptile primordium develops into the coleoptile with the shape of inverted empty cone surrounding and covering the growth cone, which is the apical cotyledon. Both types of rice embryos have dimorphic cotyledons. The structural difference between them is that the scutellum primordium of the young embryo in type 2 does not differentiate ventral scale and lateral scales while the embryo of type 1 does. The dimorphic cotyledons of embryo of Oryza plants originate from the dorsiventrality of proembryo. 展开更多
关键词 genus Oryza EMBRYOGENESIS dimorphic cotyledon dorsiventrality embryonic envelope (outside cotyledon) scutellum and coleoptile (apical cotyledon)
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部