Based on the complexity and dynamic random analysis of machine noise source in mine heading face, this article established the noise pressure mathematical model of noise propagation in mine laneway of different noise ...Based on the complexity and dynamic random analysis of machine noise source in mine heading face, this article established the noise pressure mathematical model of noise propagation in mine laneway of different noise sources, carried out noise propagation numerical simulation in long space, and revealed noise propagation law of more radiated noise sources in the mine roadway. The results show that, under conditions that the total noise power is always the same, regardless of point source, surface noise source, or body noise source, the corresponding noise attenuation trend along the mine laneway and attenuation curve shape are basically the same. However, the attenuation velocity corresponding to complex stereo noise source is slower than single point source and the noise pressure value is higher than the single point source. The actual noise of measured values is close to the theoretical value or, say, there is little error for complex stereo noise source, whereas the error to single point source and surface noise is higher, respectively.展开更多
We start from a realistic half space then use to develop a mathematical asymptotic model for thermal imaging, which we analysis well suited for the design of reconstruction algorithms. We seek to reconstruct thermal a...We start from a realistic half space then use to develop a mathematical asymptotic model for thermal imaging, which we analysis well suited for the design of reconstruction algorithms. We seek to reconstruct thermal anomalies only through their rough features. With this way our proposed algorithms are stable against measurement noise and geometry perturbations. Based on rigorous asymptotic estimates, we first obtain an approximation for the temperature profile which we then use to design noniterative detection algorithms. We show on numerical simulations evidence that they are accurate and robust. Moreover, we provide a mathematical model for ultrasonic temperature imaging, which is an important technique in cancerous tissue ablation therapy.展开更多
A dual transponder carrier ranging method can be used to measure inter-satellite distance with high precision by combining the reference and the to-and-fro measurements. Based on the differential techniques, the oscil...A dual transponder carrier ranging method can be used to measure inter-satellite distance with high precision by combining the reference and the to-and-fro measurements. Based on the differential techniques, the oscillator phase noise, which is the main error source for microwave ranging systems, can be significantly attenuated. Further, since the range measurements are derived on the same satellite, the dual transponder ranging system does not need a time tagging system to synchronize the two satellites. In view of the lack of oscillator noise analysis on the dual transponder ranging model, a comprehensive analysis of oscillator noise effects on ranging accuracy is provided. First, the dual transponder ranging system is described with emphasis on the detailed analysis of oscillator noise on measurement precision. Then, a high-fidelity numerical simulation approach based on the power spectrum density of an actual ultra-stable oscillator is carried out in both frequency domain and time domain to support the presented theoretical analysis. The simulation results under different conditions are consistent with the proposed concepts, which makes the results reliable. Besides, the results demonstrate that a high level of accuracy can be achieved by using this oscillator noise cancelation-oriented ranging method.展开更多
This paper presents a detailed experimental and numerical study of aerodynamically produced noise which occurs due to turbulent structures created by the cowl cavity and side mirror. Measurements were carried out at V...This paper presents a detailed experimental and numerical study of aerodynamically produced noise which occurs due to turbulent structures created by the cowl cavity and side mirror. Measurements were carried out at Volvo aerodynamical wind tunnel on a Volvo XC60 production model. The configurations considered here are： side mirror On/Off with the cowl cavity open/closed. The results of exterior sound source mapping （with the intensity probe placed in the flow stream） have been compared with the results of the measurements inside the car. The contribution of the cowl area to overall wind noise level is measured in terms of AI% （Articulation Index） inside the compartment. It was shown that increase in AI by 2% could be attributed to the cowl generated wind noise. Transient numerical simulations of the turbulent flow around the car have been performed for all configurations. The results of the simulations show similarity to experimental results and give insight to the flow structures around the car.展开更多
In order to elucidate the broadband noise of fan,the numerical simulation of fan operating at two different rotational speeds is carried out using the three-dimensional unsteady Reynolds-averaged Navier-Stokes (URANS)...In order to elucidate the broadband noise of fan,the numerical simulation of fan operating at two different rotational speeds is carried out using the three-dimensional unsteady Reynolds-averaged Navier-Stokes (URANS) equations.The computed results are compared to experiment to estimate its accuracy and are found to show good agreement with experiment.A method is proposed to evaluate the turbulent kinetic energy in the framework of the Spalart-Allmaras one equation turbulence model.From the calculation results,the turbulent kinetic energy is visualized as the turbulence of the flow which leads to generate the broadband noise,and its noise sources are identified.展开更多
This paper aims to investigate the stochastic resonance （SR） in an FitzHugh-Nagumo （FHN） model with an additive LEvy noise numerically. The non-Gaussian LEvy noise is a kind of general random noise which is differ...This paper aims to investigate the stochastic resonance （SR） in an FitzHugh-Nagumo （FHN） model with an additive LEvy noise numerically. The non-Gaussian LEvy noise is a kind of general random noise which is different from the usual Gaussian noise, and it has small fluctuations with the unpredictable jumps to describe the random fluctuations in an FHN model. SR is determined by the signal-to-noise ratio （SNR）, and the numerical simulation results show the occurrence of the SR phenomena in the given FHN system. The influence of various parameters of the LEvy noise and the FHN model on the SR will be exam- ined, and some mechanisms of the LEvy noise-induced SR are presented which are different from those of the Gaussian noise.展开更多
To improve the aerodynamic performance of small axial flow fan, in this paper the design of a small axial flow fan with splitter blades is studied. The RNG k-e turbulence model and SIMPLE algorithm were applied to the...To improve the aerodynamic performance of small axial flow fan, in this paper the design of a small axial flow fan with splitter blades is studied. The RNG k-e turbulence model and SIMPLE algorithm were applied to the steady simulation calculation of the flow field, and its result was used as the initial field of the large eddy simulation to calculate the unsteady pressure field. The FW-H noise model was adopted to predict aerodynamic noise in the six monitoring points. Fast Fourier transform algorithm was applied to process the pressure signal. Experiment of noise testing was done to further investigate the aerodynamic noise of fans. And then the results obtained from the numerical simulation and experiment were described and analyzed. The results show that the static characteristics of small axial fan with splitter blades are similar with the prototype fan, and the static characteristics are improved within a certain range of flux. The power spectral density at the six monitoring points of small axial flow fan with splitter blades have decreased to some extent. The experimental results show sound pressure level of new fan has reduced in most frequency bands by comparing with prototype fan. The research results will provide a proof for parameter optimization and noise prediction of small axial flow fans with high performance.展开更多
The theoretical model of spatial noise passing through a spatial filter is established in high power laser system under the small signal approximation. The transmission characteristic for a noise signal passing throug...The theoretical model of spatial noise passing through a spatial filter is established in high power laser system under the small signal approximation. The transmission characteristic for a noise signal passing through spatial filters with different magnifications is analyzed by numerical simulation, according to the actual structure of the high power laser system. The results show that the spatial modulation period of low-frequency noise getting through the pinhole will be proportional to the magnification of the spatial filter. When the magnification is less than 1, the safe low-frequency noise will be extruded into the high-frequency region, which is the fast increasing part, and finally develops into the most dangerous part which can damage the optical devices. The conclusion of this research improves the relay imaging theory of a spatial filter and provides an important theoretical basis for a general design of high power laser systems.展开更多
A direct numerical simulation of a turbulent mixing layer with the Reynolds number 500 and the convective Mach number 0.6 is performed and the results obtained are used to study the turbulent flow field and its genera...A direct numerical simulation of a turbulent mixing layer with the Reynolds number 500 and the convective Mach number 0.6 is performed and the results obtained are used to study the turbulent flow field and its generated noise.In the present simulation,the numerical techniques of absorbing buffer zones,artificial convection velocity and spatial filtering are used to achieve nonreflecting boundary conditions.The self-similarity is used to validate the present numerical simulations.The large-scale coherent structures are plotted together with the acoustic waves,which demonstrates the directivity of acoustic waves.The Lighthill's source and space-time correlations are further investigated.The main contributions to mixing noise are identified in terms of large-scale coherent structures,Lighthill's source and space-time correlations.展开更多
In order to clarify the influence of a diffuser on the charactersfics of a forward curved fan, the influence of the bare ratio and the outlet angle on the characteristics of the fan were measured through an experiment...In order to clarify the influence of a diffuser on the charactersfics of a forward curved fan, the influence of the bare ratio and the outlet angle on the characteristics of the fan were measured through an experiment performed with an actual fan as well as through a numerical simulation, respectively. The mechanism of the discrete fre- quency noise generated by the separated flow of the diffuser was analyzed. The optimized bare ratio was ap- proximately 17%. The flow separated inside of the diffuser generated discrete frequency noise owing to the inter- action between the reversed flow from the diffuser and the impeller rotating at the blade passing frequency. The diffuser outlet angle influenced the pressure ratio more than that by the bare ratio. Furthermore, it was confirmed that restraining the separation in the diffuser effectively decreases the fan noise.展开更多
基金Supported by the National Natural Science Foundation of China （50975087） the Scientific Research Starting Foundation for Returned Overseas Chinese Scholars, Ministry of Education, China （[2009] 1590） the Key Research Project of Hunan Province Office of Education （09A026）
文摘Based on the complexity and dynamic random analysis of machine noise source in mine heading face, this article established the noise pressure mathematical model of noise propagation in mine laneway of different noise sources, carried out noise propagation numerical simulation in long space, and revealed noise propagation law of more radiated noise sources in the mine roadway. The results show that, under conditions that the total noise power is always the same, regardless of point source, surface noise source, or body noise source, the corresponding noise attenuation trend along the mine laneway and attenuation curve shape are basically the same. However, the attenuation velocity corresponding to complex stereo noise source is slower than single point source and the noise pressure value is higher than the single point source. The actual noise of measured values is close to the theoretical value or, say, there is little error for complex stereo noise source, whereas the error to single point source and surface noise is higher, respectively.
基金supported by the ANR project EchoScan(AN-06-Blan-0089)the NSF grant DMS 0707421.
文摘We start from a realistic half space then use to develop a mathematical asymptotic model for thermal imaging, which we analysis well suited for the design of reconstruction algorithms. We seek to reconstruct thermal anomalies only through their rough features. With this way our proposed algorithms are stable against measurement noise and geometry perturbations. Based on rigorous asymptotic estimates, we first obtain an approximation for the temperature profile which we then use to design noniterative detection algorithms. We show on numerical simulations evidence that they are accurate and robust. Moreover, we provide a mathematical model for ultrasonic temperature imaging, which is an important technique in cancerous tissue ablation therapy.
基金Project(61106113)supported by the National Natural Science Foundation of China
文摘A dual transponder carrier ranging method can be used to measure inter-satellite distance with high precision by combining the reference and the to-and-fro measurements. Based on the differential techniques, the oscillator phase noise, which is the main error source for microwave ranging systems, can be significantly attenuated. Further, since the range measurements are derived on the same satellite, the dual transponder ranging system does not need a time tagging system to synchronize the two satellites. In view of the lack of oscillator noise analysis on the dual transponder ranging model, a comprehensive analysis of oscillator noise effects on ranging accuracy is provided. First, the dual transponder ranging system is described with emphasis on the detailed analysis of oscillator noise on measurement precision. Then, a high-fidelity numerical simulation approach based on the power spectrum density of an actual ultra-stable oscillator is carried out in both frequency domain and time domain to support the presented theoretical analysis. The simulation results under different conditions are consistent with the proposed concepts, which makes the results reliable. Besides, the results demonstrate that a high level of accuracy can be achieved by using this oscillator noise cancelation-oriented ranging method.
文摘This paper presents a detailed experimental and numerical study of aerodynamically produced noise which occurs due to turbulent structures created by the cowl cavity and side mirror. Measurements were carried out at Volvo aerodynamical wind tunnel on a Volvo XC60 production model. The configurations considered here are： side mirror On/Off with the cowl cavity open/closed. The results of exterior sound source mapping （with the intensity probe placed in the flow stream） have been compared with the results of the measurements inside the car. The contribution of the cowl area to overall wind noise level is measured in terms of AI% （Articulation Index） inside the compartment. It was shown that increase in AI by 2% could be attributed to the cowl generated wind noise. Transient numerical simulations of the turbulent flow around the car have been performed for all configurations. The results of the simulations show similarity to experimental results and give insight to the flow structures around the car.
基金carried out by IHI Corporation under the financial support from New Energy and Industrial Technology Development Organization (NEDO) as a part of "Research and Development of Environmentally Compatible Engine for Small Aircraft" in the civil aircraft basic technology program of Ministry of Economy,Trade and Industry,Japan
文摘In order to elucidate the broadband noise of fan,the numerical simulation of fan operating at two different rotational speeds is carried out using the three-dimensional unsteady Reynolds-averaged Navier-Stokes (URANS) equations.The computed results are compared to experiment to estimate its accuracy and are found to show good agreement with experiment.A method is proposed to evaluate the turbulent kinetic energy in the framework of the Spalart-Allmaras one equation turbulence model.From the calculation results,the turbulent kinetic energy is visualized as the turbulence of the flow which leads to generate the broadband noise,and its noise sources are identified.
基金supported by the the National Natural Science Foundation of China(Grant Nos.11372247&11472224)the NPU Foundation for Undergraduate Graduation Design
文摘This paper aims to investigate the stochastic resonance （SR） in an FitzHugh-Nagumo （FHN） model with an additive LEvy noise numerically. The non-Gaussian LEvy noise is a kind of general random noise which is different from the usual Gaussian noise, and it has small fluctuations with the unpredictable jumps to describe the random fluctuations in an FHN model. SR is determined by the signal-to-noise ratio （SNR）, and the numerical simulation results show the occurrence of the SR phenomena in the given FHN system. The influence of various parameters of the LEvy noise and the FHN model on the SR will be exam- ined, and some mechanisms of the LEvy noise-induced SR are presented which are different from those of the Gaussian noise.
基金supported by grants from the National Natural Science Foundation of China (No.51076144)the Major Special Project of Technology Office in Zhejiang Province (No.2011C11073, No.2011C16038)
文摘To improve the aerodynamic performance of small axial flow fan, in this paper the design of a small axial flow fan with splitter blades is studied. The RNG k-e turbulence model and SIMPLE algorithm were applied to the steady simulation calculation of the flow field, and its result was used as the initial field of the large eddy simulation to calculate the unsteady pressure field. The FW-H noise model was adopted to predict aerodynamic noise in the six monitoring points. Fast Fourier transform algorithm was applied to process the pressure signal. Experiment of noise testing was done to further investigate the aerodynamic noise of fans. And then the results obtained from the numerical simulation and experiment were described and analyzed. The results show that the static characteristics of small axial fan with splitter blades are similar with the prototype fan, and the static characteristics are improved within a certain range of flux. The power spectral density at the six monitoring points of small axial flow fan with splitter blades have decreased to some extent. The experimental results show sound pressure level of new fan has reduced in most frequency bands by comparing with prototype fan. The research results will provide a proof for parameter optimization and noise prediction of small axial flow fans with high performance.
文摘The theoretical model of spatial noise passing through a spatial filter is established in high power laser system under the small signal approximation. The transmission characteristic for a noise signal passing through spatial filters with different magnifications is analyzed by numerical simulation, according to the actual structure of the high power laser system. The results show that the spatial modulation period of low-frequency noise getting through the pinhole will be proportional to the magnification of the spatial filter. When the magnification is less than 1, the safe low-frequency noise will be extruded into the high-frequency region, which is the fast increasing part, and finally develops into the most dangerous part which can damage the optical devices. The conclusion of this research improves the relay imaging theory of a spatial filter and provides an important theoretical basis for a general design of high power laser systems.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11232011 and 11021262)the National Basic Research Program of China (Grant No. 2013CB834100)(Nonlinear science)
文摘A direct numerical simulation of a turbulent mixing layer with the Reynolds number 500 and the convective Mach number 0.6 is performed and the results obtained are used to study the turbulent flow field and its generated noise.In the present simulation,the numerical techniques of absorbing buffer zones,artificial convection velocity and spatial filtering are used to achieve nonreflecting boundary conditions.The self-similarity is used to validate the present numerical simulations.The large-scale coherent structures are plotted together with the acoustic waves,which demonstrates the directivity of acoustic waves.The Lighthill's source and space-time correlations are further investigated.The main contributions to mixing noise are identified in terms of large-scale coherent structures,Lighthill's source and space-time correlations.
文摘In order to clarify the influence of a diffuser on the charactersfics of a forward curved fan, the influence of the bare ratio and the outlet angle on the characteristics of the fan were measured through an experiment performed with an actual fan as well as through a numerical simulation, respectively. The mechanism of the discrete fre- quency noise generated by the separated flow of the diffuser was analyzed. The optimized bare ratio was ap- proximately 17%. The flow separated inside of the diffuser generated discrete frequency noise owing to the inter- action between the reversed flow from the diffuser and the impeller rotating at the blade passing frequency. The diffuser outlet angle influenced the pressure ratio more than that by the bare ratio. Furthermore, it was confirmed that restraining the separation in the diffuser effectively decreases the fan noise.
