By analyzing the target's motion pattern, in terms of the requirement for the performance indexes of the follow up system, the structure changing control and time optimal theory is proposed. The system's co...By analyzing the target's motion pattern, in terms of the requirement for the performance indexes of the follow up system, the structure changing control and time optimal theory is proposed. The system's control scheme from three different aspects(the dynamic response simulation, compound control simulation and dynamic tracking simulation) is also studied. And all the results proved the feasibility of the synthetical utilization of the open loop control, speed decreased control and position closed loop control.展开更多
Zirconium-titanium-steel composite plate with the size of 2500 mm×7800 mm×(3+0.7+22)mm was prepared by explosive welding+rolling method,and its properties were analyzed by ultrasonic nondestructive testing,p...Zirconium-titanium-steel composite plate with the size of 2500 mm×7800 mm×(3+0.7+22)mm was prepared by explosive welding+rolling method,and its properties were analyzed by ultrasonic nondestructive testing,phased array waveform shape,interface structure shape,electronic scanning,and mechanical property testing.Results show that the rolling temperature of zirconiumtitanium complex should be controlled at 760°C,and the rolling reduction of each pass should be controlled at 10%–25%.The explosive velocity to prepare zirconium-titanium-steel composite plates should be controlled at 2450–2500 m/s,the density should be 0.78 g/cm3,the stand-off height should be 12 mm,and the explosive height of Zone A and Zone B should be 45–50 mm.Explosive welding combined with rolling method reduces the impact of explosive welding and multiple heat treatment on material properties.Meanwhile,the problems of surface wrinkling and cracking,which occur during the preparation process of large-sized zirconiumtitanium-steel composite plate,can be solved.展开更多
The smart magneto-rheological visco-elastomer (MRVE) has a promising application to vibration control.Its dynamic characteristics are described by complex moduli which are applicable to linear dynamics.However,experim...The smart magneto-rheological visco-elastomer (MRVE) has a promising application to vibration control.Its dynamic characteristics are described by complex moduli which are applicable to linear dynamics.However,experimental results show remarkable nonlinear relations between force and deformation for certain large deformations,and the nonlinear dynamic modeling needs to be developed.The present study focuses on the nonlinear dynamic characteristics of MRVE.The MRVE was fabricated and specimens were tested to show nonlinear mechanical properties and dynamic behaviors.The nonlinear effect induced by applied magnetic fields was investigated.A phenomenological model for the dynamic behaviors of MRVE was proposed to describe the nonlinear elasticity,linear damping and hysteretic effect,and the corresponding equivalent linear model in the frequency domain was also given for small deformations.The proposed model is applicable to the dynamics and control analysis of composite structures with MRVE.展开更多
Last two decades have witnessed significant progress in thermoelectric research, to which materials processing has crucial contributions. Compared with traditional zone-melting method used for fabricating bismuth tell...Last two decades have witnessed significant progress in thermoelectric research, to which materials processing has crucial contributions. Compared with traditional zone-melting method used for fabricating bismuth telluride alloys, new powder-based processes have more freedom for manipulating nanostructnres and nanocomposites. Thermoelectric performance enhancement is realized in most thermoelectric materials by introducing fine-grained and nano-composite structures with accurately controlled compositions. This review gives a comprehensive summary on the processing aspects of thermoelectric materials with three focuses on the powder synthesis, advanced sintering process and the formation of nanostructures in bulk materials.展开更多
文摘By analyzing the target's motion pattern, in terms of the requirement for the performance indexes of the follow up system, the structure changing control and time optimal theory is proposed. The system's control scheme from three different aspects(the dynamic response simulation, compound control simulation and dynamic tracking simulation) is also studied. And all the results proved the feasibility of the synthetical utilization of the open loop control, speed decreased control and position closed loop control.
基金Key R&D Plan of Shaanxi Province(2021LLRH-05-09)Shaanxi Province Youth Talent Support Program Project(CLGC202234)Sponsored by Innovative Pilot Platform for Layered Metal Composite Materials(2024CX-GXPT-20)。
文摘Zirconium-titanium-steel composite plate with the size of 2500 mm×7800 mm×(3+0.7+22)mm was prepared by explosive welding+rolling method,and its properties were analyzed by ultrasonic nondestructive testing,phased array waveform shape,interface structure shape,electronic scanning,and mechanical property testing.Results show that the rolling temperature of zirconiumtitanium complex should be controlled at 760°C,and the rolling reduction of each pass should be controlled at 10%–25%.The explosive velocity to prepare zirconium-titanium-steel composite plates should be controlled at 2450–2500 m/s,the density should be 0.78 g/cm3,the stand-off height should be 12 mm,and the explosive height of Zone A and Zone B should be 45–50 mm.Explosive welding combined with rolling method reduces the impact of explosive welding and multiple heat treatment on material properties.Meanwhile,the problems of surface wrinkling and cracking,which occur during the preparation process of large-sized zirconiumtitanium-steel composite plate,can be solved.
基金supported by the National Natural Science Foundation of China (Grant No. 11072215)the Fundamental Research Funds for the Central Universitiesthe Hong Kong Polytechnic University through the Development of Niche Areas Programme (Grant No. 1-BB95)
文摘The smart magneto-rheological visco-elastomer (MRVE) has a promising application to vibration control.Its dynamic characteristics are described by complex moduli which are applicable to linear dynamics.However,experimental results show remarkable nonlinear relations between force and deformation for certain large deformations,and the nonlinear dynamic modeling needs to be developed.The present study focuses on the nonlinear dynamic characteristics of MRVE.The MRVE was fabricated and specimens were tested to show nonlinear mechanical properties and dynamic behaviors.The nonlinear effect induced by applied magnetic fields was investigated.A phenomenological model for the dynamic behaviors of MRVE was proposed to describe the nonlinear elasticity,linear damping and hysteretic effect,and the corresponding equivalent linear model in the frequency domain was also given for small deformations.The proposed model is applicable to the dynamics and control analysis of composite structures with MRVE.
基金supported by the National Natural Science Foundation of China(Grant No.11474176)the Ministry of Science and Technology of China(Grant No.2013CB632503)
文摘Last two decades have witnessed significant progress in thermoelectric research, to which materials processing has crucial contributions. Compared with traditional zone-melting method used for fabricating bismuth telluride alloys, new powder-based processes have more freedom for manipulating nanostructnres and nanocomposites. Thermoelectric performance enhancement is realized in most thermoelectric materials by introducing fine-grained and nano-composite structures with accurately controlled compositions. This review gives a comprehensive summary on the processing aspects of thermoelectric materials with three focuses on the powder synthesis, advanced sintering process and the formation of nanostructures in bulk materials.
