By means of microstructure observation and measurement of creep properties,the high temperature creep behaviors of a single crystal nickel-based superalloy containing Re were investigated.Results show that the single ...By means of microstructure observation and measurement of creep properties,the high temperature creep behaviors of a single crystal nickel-based superalloy containing Re were investigated.Results show that the single crystal nickel-based superalloy containing 4.2% Re possesses a better creep resistance at high temperature.After being crept up to fracture,the various morphologies are displayed in the different areas of the sample,and the γ＇ phase is transformed into the rafted structure along the direction vertical to the applied stress axis in the regions far from the fracture.But the coarsening and twisting extents of the rafted γ＇ phase increase in the regions near the fracture,which is attributed to the occurrence of the larger plastic deformation.In the later stage of creep,the deformation mechanism of the alloy is that the dislocations with [01^-1]and [011] trace features shear into the rafted γ＇ phase.The main/secondary slipping dislocations are alternately activated to twist the rafted γ＇ phase up to the occurrence of creep fracture,which is thought to be the fracture mechanism of the alloy during creep.展开更多
The Mg−Al composite rods of aluminum core-reinforced magnesium alloy were prepared by the extrusion−shear(ES)process,and the microstructure,deformation mechanism,and mechanical properties of the Mg−Al composite rods w...The Mg−Al composite rods of aluminum core-reinforced magnesium alloy were prepared by the extrusion−shear(ES)process,and the microstructure,deformation mechanism,and mechanical properties of the Mg−Al composite rods were investigated at different extrusion temperatures and shear stresses.The experimental results show that the proportion of dynamic recrystallization(DRX)and texture for Al and Mg alloys are controlled by the combination of temperature and shear stress.The texture type of the Al alloys exhibits slight variations at different temperatures.With the increase of temperature,the DRX behavior of Mg alloy shifts from discontinuous DRX(DDRX),continuous DRX(CDRX),and twin-induced DRX(TDRX)dominant to CDRX,the dislocation density in Mg alloy grains decreases significantly,and the average value of Schmid factor(SF)of the basal<a>slip system increases.In particular,partial grains exhibit a distinct dominant slip system at 390℃.The hardness and thickness of the bonding layer,as well as the yield strength and elongation of the Mg alloy,reach their maximum at 360℃as a result of the intricate influence of the combined temperature and shear stress.展开更多
The effects of starting texture on he flow curves, and microstructure and texture evolutions of AZ31(Mg-3Al-1Zn-0.3Mn in wt.%) alloy during uniaxial compression at room temperature have been investigated by experiment...The effects of starting texture on he flow curves, and microstructure and texture evolutions of AZ31(Mg-3Al-1Zn-0.3Mn in wt.%) alloy during uniaxial compression at room temperature have been investigated by experiments and simulations. Two kinds of cylindrical compression samples were cut from the AZ31 extruded rod: one was cut with the compression direction parallel to the extruded direction(ED), and the other was cut with the compression axis perpendicular to the ED. The samples were termed as C//ED sample and C⊥ED sample, respectively. The results indicate that the general characteristics of flow curves and texture evolutions in both C⊥ED and C//ED samples during compression can be well explained by the relative activities of deformation mechanisms, which show a strong orientation dependence on the initial textures and the current texture. A significant yield behavior can be induced by {10-12} twinning at the starting deformation, and the lower yield stress in C⊥ED sample can be enhanced by the high activity of basal slip. The work hardening behavior is related to the activities of basal slip, pyramidal <c+a> slip, {10-12} twinning, as well as {10-11} twinning. However, the activity of prismatic slip is insensitive to the starting texture, and mostly negligible in all samples.展开更多
Coals with different deformation mechanisms(brittle deformation,brittle-ductile deformation,and ductile deformation) repre-sent different ways in macromolecular structure evolution based on the metamorphism.The evolut...Coals with different deformation mechanisms(brittle deformation,brittle-ductile deformation,and ductile deformation) repre-sent different ways in macromolecular structure evolution based on the metamorphism.The evolution of coal structure could affect the occurrence condition of coalbed methane(CBM) because the nanopore structure affected by macromolecular struc-ture is the most important reservoir for CBM.This paper analyzes the evolutions and mechanisms of structure and functional group of tectonically deformed coals(TDCs) collected from Huainan-Huaibei coalfield using X-ray diffraction(XRD),Raman spectroscopy,and Fourier Transform Infrared(FTIR) spectroscopy methods.The results show that the macromolecular struc-ture evolutions of TDC are different from the primary structure coal as a result of the different metamorphic grade and defor-mation mechanisms.The different deformation mechanisms variously affect the process of functional group and polyconden-sation of macromolecular structure.Furthermore,the tectonic deformation leads to secondary structural defects and reduces the structure stability of TDC.The coupled evolution on stacking and extension caused by the changes of secondary structural de-fects results from different deformation mechanisms.We consider that the changes of chemical structure and secondary struc-tural defects are the primary reasons for the various structure evolutions of TDC compared with primary structure coal.展开更多
基金Project(50571070) supported by the National Natural Science Foundation of China
文摘By means of microstructure observation and measurement of creep properties,the high temperature creep behaviors of a single crystal nickel-based superalloy containing Re were investigated.Results show that the single crystal nickel-based superalloy containing 4.2% Re possesses a better creep resistance at high temperature.After being crept up to fracture,the various morphologies are displayed in the different areas of the sample,and the γ＇ phase is transformed into the rafted structure along the direction vertical to the applied stress axis in the regions far from the fracture.But the coarsening and twisting extents of the rafted γ＇ phase increase in the regions near the fracture,which is attributed to the occurrence of the larger plastic deformation.In the later stage of creep,the deformation mechanism of the alloy is that the dislocations with [01^-1]and [011] trace features shear into the rafted γ＇ phase.The main/secondary slipping dislocations are alternately activated to twist the rafted γ＇ phase up to the occurrence of creep fracture,which is thought to be the fracture mechanism of the alloy during creep.
基金supported by the general project of the National Natural Science Foundation of China(No.52071042)Chongqing Natural Science Foundation Project,China(Nos.CSTB2023NSCQ-MSX0079,cstc2021ycjh-bgzxm0148)Graduate Student Innovation Program of Chongqing University of Technology,China(No.gzlcx20232008).
文摘The Mg−Al composite rods of aluminum core-reinforced magnesium alloy were prepared by the extrusion−shear(ES)process,and the microstructure,deformation mechanism,and mechanical properties of the Mg−Al composite rods were investigated at different extrusion temperatures and shear stresses.The experimental results show that the proportion of dynamic recrystallization(DRX)and texture for Al and Mg alloys are controlled by the combination of temperature and shear stress.The texture type of the Al alloys exhibits slight variations at different temperatures.With the increase of temperature,the DRX behavior of Mg alloy shifts from discontinuous DRX(DDRX),continuous DRX(CDRX),and twin-induced DRX(TDRX)dominant to CDRX,the dislocation density in Mg alloy grains decreases significantly,and the average value of Schmid factor(SF)of the basal<a>slip system increases.In particular,partial grains exhibit a distinct dominant slip system at 390℃.The hardness and thickness of the bonding layer,as well as the yield strength and elongation of the Mg alloy,reach their maximum at 360℃as a result of the intricate influence of the combined temperature and shear stress.
基金supported by the National Natural Science Foundation of China(Grant No.51301040)
文摘The effects of starting texture on he flow curves, and microstructure and texture evolutions of AZ31(Mg-3Al-1Zn-0.3Mn in wt.%) alloy during uniaxial compression at room temperature have been investigated by experiments and simulations. Two kinds of cylindrical compression samples were cut from the AZ31 extruded rod: one was cut with the compression direction parallel to the extruded direction(ED), and the other was cut with the compression axis perpendicular to the ED. The samples were termed as C//ED sample and C⊥ED sample, respectively. The results indicate that the general characteristics of flow curves and texture evolutions in both C⊥ED and C//ED samples during compression can be well explained by the relative activities of deformation mechanisms, which show a strong orientation dependence on the initial textures and the current texture. A significant yield behavior can be induced by {10-12} twinning at the starting deformation, and the lower yield stress in C⊥ED sample can be enhanced by the high activity of basal slip. The work hardening behavior is related to the activities of basal slip, pyramidal <c+a> slip, {10-12} twinning, as well as {10-11} twinning. However, the activity of prismatic slip is insensitive to the starting texture, and mostly negligible in all samples.
基金supported by National Natural Science Foundation of China (Grant Nos.40772135,40972131 and 41030422)National Basic Research Program of China (Grant Nos.2009CB219601 and 2006CB202201)Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No.XDA05030100)
文摘Coals with different deformation mechanisms(brittle deformation,brittle-ductile deformation,and ductile deformation) repre-sent different ways in macromolecular structure evolution based on the metamorphism.The evolution of coal structure could affect the occurrence condition of coalbed methane(CBM) because the nanopore structure affected by macromolecular struc-ture is the most important reservoir for CBM.This paper analyzes the evolutions and mechanisms of structure and functional group of tectonically deformed coals(TDCs) collected from Huainan-Huaibei coalfield using X-ray diffraction(XRD),Raman spectroscopy,and Fourier Transform Infrared(FTIR) spectroscopy methods.The results show that the macromolecular struc-ture evolutions of TDC are different from the primary structure coal as a result of the different metamorphic grade and defor-mation mechanisms.The different deformation mechanisms variously affect the process of functional group and polyconden-sation of macromolecular structure.Furthermore,the tectonic deformation leads to secondary structural defects and reduces the structure stability of TDC.The coupled evolution on stacking and extension caused by the changes of secondary structural de-fects results from different deformation mechanisms.We consider that the changes of chemical structure and secondary struc-tural defects are the primary reasons for the various structure evolutions of TDC compared with primary structure coal.
