To investigate the workpiece curvature influence on groove deformation,numerical studies with curvature varying from negative to positive were conducted on copper material.Groove deformations were analyzed,including g...To investigate the workpiece curvature influence on groove deformation,numerical studies with curvature varying from negative to positive were conducted on copper material.Groove deformations were analyzed,including groove geometry,effective stress distribution and plough force.The curled groove shape whose workpiece curvature was 0.133 mm-1 was validated by experiments.Moreover,a series of geometry models with various curvatures were introduced to analyze the change of groove deformation.The results show that positive curvatures influence groove deformation more intensively than negative or zero curvature.It is mainly due to the action of the tool forming face during plough process.展开更多
Spinel LiMn2O4 microspheres with durable high rate capability were synthesized by a facile route using spherical MnCO3 precursors as the self-supported templates, combined with the calcinations of LiNO3 at 700 °C...Spinel LiMn2O4 microspheres with durable high rate capability were synthesized by a facile route using spherical MnCO3 precursors as the self-supported templates, combined with the calcinations of LiNO3 at 700 °C for 8 h. The spherical MnCO3 precursors were obtained from the control of the crystallizing process of Mn2＋ ions and NH4HCO3 in aqueous solution. The effects of the mole ratio of the raw materials, reaction time, and reaction temperature on the morphology and yield of the MnCO3 were investigated. The as-synthesized MnCO3 and LiMn2O4 microspheres were characterized by powder X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. Galvanostatic charge/discharge tests indicate that the spinel LiMn2O4 microspheres deliver a discharge capacity of 90 mA-h/g at 10C rate show good capacity retention capability （75% of their initial capacity after 800 cycles at 10C rate）. The durable high rate capability suggests that the as-synthesized LiMn2O4 microspheres are promising cathode materials for high power lithium ion batteries.展开更多
Isothermal microcalorimetry provides thermodynamic and kinetic information on various reactions and processes and is thereby a powerful tool to elucidate their mechanisms. Certain improvement in isothermal microcalori...Isothermal microcalorimetry provides thermodynamic and kinetic information on various reactions and processes and is thereby a powerful tool to elucidate their mechanisms. Certain improvement in isothermal microcalorimetry with regard to the studies on soil and environmental sciences is briefly described. This review mainly focuses on the use of microcalorimetry in the determination of soil microbial activity, monitoring the toxicity and biodegradation of soil organic pollutants, the risk evaluation of metals and metalloids, the heat effect of ion exchange and adsorption in soil, and environmental researches. Promising prospects for the applications of the technique in the field are also discussed.展开更多
The sensitive second derivative waves of Cu(Ⅱ),Pb(Ⅱ),Cd(Ⅱ),Ni(Ⅱ),Zn(Ⅱ),Fe(Ⅱ)and Mn(Ⅱ),forming in the substrate solution(pH=9.26)consisting of ammonia,ammonium chlorid,gelatin and ascorbic acid were researched.T...The sensitive second derivative waves of Cu(Ⅱ),Pb(Ⅱ),Cd(Ⅱ),Ni(Ⅱ),Zn(Ⅱ),Fe(Ⅱ)and Mn(Ⅱ),forming in the substrate solution(pH=9.26)consisting of ammonia,ammonium chlorid,gelatin and ascorbic acid were researched.The peak potentials of the polarographic waves of the seven ions are at about 0.48,0.63,0.79,1.04,1.28,1.44 and 1.60 V respectively.Combining with microwave technique,a new method for the simultaneous determination of the seven trace elements in Chinese traditional medicine was developed.The method is easy to operate,rapid,simple and convenient.When the signal-to-noise rate equals 3,the detection limits of Cu,Pb,Cd,Ni,Zn,Fe and Mn are 4.2×10 3,5.3×10 3,2.1×10 3,5.8×10 4,3.0×10 3,7.7×10 4 and 1.1×10 3 μg/mL respectively.Well linear relationships exist between the concentrations and the peak currents when Cu,Pb,Cd,Ni,Zn,Fe and Mn concentrations are within 8.5×10 3 10,9.7×10 3 10,4.5×10 3 10,1.2×10 3 10,6.4×10 3 10,1.5×10 3 10 and 2.8×10 3 10 μg/mL,respectively.The method has been used to the simultaneous determination of the seven trace elements in Salvia Miltiorrhiza Root and compound Salvia Miltiorrhiza Root injection,the relative standard deviations(RSDs)of the Cu,Pb,Cd,Ni,Zn,Fe and Mn in the two medicines are 3.9% and 5.8%,4.0% and 4.1%,4.3% and 5.7%,4.9% and 5.3%,4.4% and 4.7%,3.5% and 4.0%,0.51% and 2.8%,respectively;the comparisons of the determination results with the values obtained by the standard method indicate that the presented method has very well veracity.展开更多
The aim of this paper is to obtain numerical solutions of the one-dimensional,two-dimensional and coupled Burgers' equations through the generalized differential quadrature method(GDQM).The polynomial-based differ...The aim of this paper is to obtain numerical solutions of the one-dimensional,two-dimensional and coupled Burgers' equations through the generalized differential quadrature method(GDQM).The polynomial-based differential quadrature(PDQ) method is employed and the obtained system of ordinary differential equations is solved via the total variation diminishing Runge-Kutta(TVD-RK) method.The numerical solutions are satisfactorily coincident with the exact solutions.The method can compete against the methods applied in the literature.展开更多
A series of die casting heat-resistant magnesium alloys based on Mg-Al system were developed for automotive application by adding Y and various amounts of Ca. The mechanical properties and microstructures of die casti...A series of die casting heat-resistant magnesium alloys based on Mg-Al system were developed for automotive application by adding Y and various amounts of Ca. The mechanical properties and microstructures of die casting AZ91 alloy with combined addition of Y and Ca were investigated by optical microscopy, scanning electronic microscopy, X-ray diffractometry and mechanical property test. The results show that the combined addition of Y and Ca can refine the as-die-cast microstructure, result in the formation of Al2Ca phase and Al2Y phase, and inhibit the precipitation of Mg17Al12 phase. The combined addition of Y and small amount of Ca has little influence on the ambient temperature tensile properties, but increasing the content of Ca can improve significantly the tensile strength at both ambient and elevated temperatures. It is found that for AZ91-1Y-xCa alloy, the hardness and the elevated temperature tensile strength increase, while the elongation decreases with increasing the addition of Ca. The mechanism of mechanical properties improvement caused by the combined addition of Y and Ca was also discussed.展开更多
Optical microscopy, and scanning electron microscopy in conjunction with energy dispersed X-ray spectrometry （SEM-EDX）, have been used to study the minerals and the concentrations of 12 trace elements in the No.14 c...Optical microscopy, and scanning electron microscopy in conjunction with energy dispersed X-ray spectrometry （SEM-EDX）, have been used to study the minerals and the concentrations of 12 trace elements in the No.14 coal from the Huolinhe mine, Inner Mongolia China. The distribution, affinity and removability of the trace elements were studied by float-sink experiments and petrological methods. A high mineral content, dominated by clay minerals, was found in the No.14 coal from the Huolinhe mine. The concentrations of As, Sb and Hg are relatively high compared to the average values for Chinese coals. As, Cr, Hg, Li, Mn, Pb are mainly associated with the minerals while Cd, Co, Ni, Sb, and Se are evenly distributed between the minerals and the organic matter. Be and Ba are mainly distributed in the minerals with a minor proportion in the organic matter. Most elements have a low organic affinity, although Sb, Se, Co, Cd, Ni are closely integrated with the organic matter. High theoretical removabilities are indicated for most trace elements. So it may be possible to lower the concentrations of trace elements during coal preparation.展开更多
This paper investigated the nonlinear vibration of functionally graded beams containing an open edge crack based on Timoshenko beam theory.The cracked section is modeled by a massless elastic rotational spring.It is a...This paper investigated the nonlinear vibration of functionally graded beams containing an open edge crack based on Timoshenko beam theory.The cracked section is modeled by a massless elastic rotational spring.It is assumed that material properties follow exponential distributions through the beam thickness.The differential quadrature(DQ) method is employed to discretize the nonlinear governing equations which are then solved by a direct iterative method to obtain the nonlinear vibration frequencies of beams with different boundary conditions.The effects of the material gradient,crack depth and boundary conditions on nonlinear free vibration characteristics of the cracked FGM beams are studied in detail.展开更多
基金Project (U0834002) supported by the Key Program of NSFC-Guangdong Joint Funds of ChinaProject (51005079) supported by the National Natural Science Foundation of China+1 种基金Project (20100172120001) supported by Specialized Research Fund for the Doctoral Program of Higher Education, ChinaProject (10451064101005146) supported by the Natural Science Foundation of Guangdong Province,China
文摘To investigate the workpiece curvature influence on groove deformation,numerical studies with curvature varying from negative to positive were conducted on copper material.Groove deformations were analyzed,including groove geometry,effective stress distribution and plough force.The curled groove shape whose workpiece curvature was 0.133 mm-1 was validated by experiments.Moreover,a series of geometry models with various curvatures were introduced to analyze the change of groove deformation.The results show that positive curvatures influence groove deformation more intensively than negative or zero curvature.It is mainly due to the action of the tool forming face during plough process.
基金Project(2011M501090) upported by the China Postdoctoral Science FoundationProject(SCUT2012ZZ0042) upported by the Fundamental Research Funds for the Central Universities+1 种基金Project supported by the"SPR-2011"of South China University of TechnologyProject(NRC07/08.EG01)supprted by the Fok Ying Tung Foundation
文摘Spinel LiMn2O4 microspheres with durable high rate capability were synthesized by a facile route using spherical MnCO3 precursors as the self-supported templates, combined with the calcinations of LiNO3 at 700 °C for 8 h. The spherical MnCO3 precursors were obtained from the control of the crystallizing process of Mn2＋ ions and NH4HCO3 in aqueous solution. The effects of the mole ratio of the raw materials, reaction time, and reaction temperature on the morphology and yield of the MnCO3 were investigated. The as-synthesized MnCO3 and LiMn2O4 microspheres were characterized by powder X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. Galvanostatic charge/discharge tests indicate that the spinel LiMn2O4 microspheres deliver a discharge capacity of 90 mA-h/g at 10C rate show good capacity retention capability （75% of their initial capacity after 800 cycles at 10C rate）. The durable high rate capability suggests that the as-synthesized LiMn2O4 microspheres are promising cathode materials for high power lithium ion batteries.
基金Project supported by the National Natural Science Foundation of China (No. 40571084).
文摘Isothermal microcalorimetry provides thermodynamic and kinetic information on various reactions and processes and is thereby a powerful tool to elucidate their mechanisms. Certain improvement in isothermal microcalorimetry with regard to the studies on soil and environmental sciences is briefly described. This review mainly focuses on the use of microcalorimetry in the determination of soil microbial activity, monitoring the toxicity and biodegradation of soil organic pollutants, the risk evaluation of metals and metalloids, the heat effect of ion exchange and adsorption in soil, and environmental researches. Promising prospects for the applications of the technique in the field are also discussed.
基金Proejcr(20235020) supported by the National Natural Science Foundation of China
文摘The sensitive second derivative waves of Cu(Ⅱ),Pb(Ⅱ),Cd(Ⅱ),Ni(Ⅱ),Zn(Ⅱ),Fe(Ⅱ)and Mn(Ⅱ),forming in the substrate solution(pH=9.26)consisting of ammonia,ammonium chlorid,gelatin and ascorbic acid were researched.The peak potentials of the polarographic waves of the seven ions are at about 0.48,0.63,0.79,1.04,1.28,1.44 and 1.60 V respectively.Combining with microwave technique,a new method for the simultaneous determination of the seven trace elements in Chinese traditional medicine was developed.The method is easy to operate,rapid,simple and convenient.When the signal-to-noise rate equals 3,the detection limits of Cu,Pb,Cd,Ni,Zn,Fe and Mn are 4.2×10 3,5.3×10 3,2.1×10 3,5.8×10 4,3.0×10 3,7.7×10 4 and 1.1×10 3 μg/mL respectively.Well linear relationships exist between the concentrations and the peak currents when Cu,Pb,Cd,Ni,Zn,Fe and Mn concentrations are within 8.5×10 3 10,9.7×10 3 10,4.5×10 3 10,1.2×10 3 10,6.4×10 3 10,1.5×10 3 10 and 2.8×10 3 10 μg/mL,respectively.The method has been used to the simultaneous determination of the seven trace elements in Salvia Miltiorrhiza Root and compound Salvia Miltiorrhiza Root injection,the relative standard deviations(RSDs)of the Cu,Pb,Cd,Ni,Zn,Fe and Mn in the two medicines are 3.9% and 5.8%,4.0% and 4.1%,4.3% and 5.7%,4.9% and 5.3%,4.4% and 4.7%,3.5% and 4.0%,0.51% and 2.8%,respectively;the comparisons of the determination results with the values obtained by the standard method indicate that the presented method has very well veracity.
文摘The aim of this paper is to obtain numerical solutions of the one-dimensional,two-dimensional and coupled Burgers' equations through the generalized differential quadrature method(GDQM).The polynomial-based differential quadrature(PDQ) method is employed and the obtained system of ordinary differential equations is solved via the total variation diminishing Runge-Kutta(TVD-RK) method.The numerical solutions are satisfactorily coincident with the exact solutions.The method can compete against the methods applied in the literature.
基金Project(2008T142) supported by the Innovation Team Program of Liaoning Provincial Department of Education of China
文摘A series of die casting heat-resistant magnesium alloys based on Mg-Al system were developed for automotive application by adding Y and various amounts of Ca. The mechanical properties and microstructures of die casting AZ91 alloy with combined addition of Y and Ca were investigated by optical microscopy, scanning electronic microscopy, X-ray diffractometry and mechanical property test. The results show that the combined addition of Y and Ca can refine the as-die-cast microstructure, result in the formation of Al2Ca phase and Al2Y phase, and inhibit the precipitation of Mg17Al12 phase. The combined addition of Y and small amount of Ca has little influence on the ambient temperature tensile properties, but increasing the content of Ca can improve significantly the tensile strength at both ambient and elevated temperatures. It is found that for AZ91-1Y-xCa alloy, the hardness and the elevated temperature tensile strength increase, while the elongation decreases with increasing the addition of Ca. The mechanism of mechanical properties improvement caused by the combined addition of Y and Ca was also discussed.
文摘Optical microscopy, and scanning electron microscopy in conjunction with energy dispersed X-ray spectrometry （SEM-EDX）, have been used to study the minerals and the concentrations of 12 trace elements in the No.14 coal from the Huolinhe mine, Inner Mongolia China. The distribution, affinity and removability of the trace elements were studied by float-sink experiments and petrological methods. A high mineral content, dominated by clay minerals, was found in the No.14 coal from the Huolinhe mine. The concentrations of As, Sb and Hg are relatively high compared to the average values for Chinese coals. As, Cr, Hg, Li, Mn, Pb are mainly associated with the minerals while Cd, Co, Ni, Sb, and Se are evenly distributed between the minerals and the organic matter. Be and Ba are mainly distributed in the minerals with a minor proportion in the organic matter. Most elements have a low organic affinity, although Sb, Se, Co, Cd, Ni are closely integrated with the organic matter. High theoretical removabilities are indicated for most trace elements. So it may be possible to lower the concentrations of trace elements during coal preparation.
基金supported by the National Natural Science Foundation of China (Grant No. 11002019)Ph.D. Programs Foundation of the Ministry of Education of China (Grant No. 20100009120018)the Fundamental Research Funds for the Central Universities (Grant No. 2009JBM073)
文摘This paper investigated the nonlinear vibration of functionally graded beams containing an open edge crack based on Timoshenko beam theory.The cracked section is modeled by a massless elastic rotational spring.It is assumed that material properties follow exponential distributions through the beam thickness.The differential quadrature(DQ) method is employed to discretize the nonlinear governing equations which are then solved by a direct iterative method to obtain the nonlinear vibration frequencies of beams with different boundary conditions.The effects of the material gradient,crack depth and boundary conditions on nonlinear free vibration characteristics of the cracked FGM beams are studied in detail.
