The analytical method based on "Hertz theory on normal contact of elastic solids" and the numerical method based on finite element method (FEM) calculating the contact stress of face-gear drive with spur inv...The analytical method based on "Hertz theory on normal contact of elastic solids" and the numerical method based on finite element method (FEM) calculating the contact stress of face-gear drive with spur involute pinion were introduced, and their relative errors are below 10%, except edge contact, which turns out that these two methods can compute contact stress of face-gear drive correctly and effectively. An agreement of the localized bearing contact stress is gotten for these two methods, making sure that the calculation results of FEM are reliable. The loaded meshing simulations of multi-tooth FEM model were developed, and the determination of the transmission error and the maximal load distribution factor of face-gear drive under torques were given. A formula for the maximal load distribution factor was proposed. By introducing the maximal load distribution factor in multi-tooth contact zone, a method for calculating the maximal contact stress in multi-tooth contact can be given. Compared to FEM, the results of these formulae are proved to be reliable, and the relative errors are below 10%.展开更多
A calculation method of contact problem of plastic gears based on three parameter model of viscoelasticity material is presented. In this calculation method, the influence of temperature upon the property of plastics ...A calculation method of contact problem of plastic gears based on three parameter model of viscoelasticity material is presented. In this calculation method, the influence of temperature upon the property of plastics is considered and an iteration process of temperature-elasticity module-friction coefficient is proposed. From the rolling contact problem of two viscoelastic cylinders with parallel axis, a set of normal-tangential contact coupled integral equations is obtained. Through numerical treatment and normal-tangential iteration, the normal contact stress,tangential stress and contact width of plastic gears are acquired.展开更多
In network-connected UAV(NCUAV) communication systems, user authentication is replaced by platform identity authentication and integrity check because many NC-UAVs are operated without human intervention. Direct anony...In network-connected UAV(NCUAV) communication systems, user authentication is replaced by platform identity authentication and integrity check because many NC-UAVs are operated without human intervention. Direct anonymous attestation(DAA) is an attractive cryptographic scheme that provides an elegant balance between platform authentication and anonymity. However, because of the low-level computing capability and limited transmission bandwidth in UAV, the existing DAA schemes are not suitable for NC-UAV communication systems. In this paper, we propose an enhanced DAA scheme with mutual authentication(MA-DAA scheme), which meets the security requirements of NC-UAV communication systems. The proposed MA-DAA scheme, which is based on asymmetric pairings, bundles the identities of trusted platform module(TPM) and Host to solve the malicious module changing attacks. Credential randomization, batch proof and verification, and mutual authentication are realized in the MA-DAA scheme. The computational workload in TPM and Host is reduced in order to meet the low computation and resource requirements in TPM and Host.The entire scheme and protocols are presented,and the security and efficiency of the proposed MA-DAA scheme are proved and analyzed.Our experiment results also confirm the high efficiency of the proposed scheme.展开更多
A two-dimensioual stress analysis was developed to evaluate the failure of composite joints using characteristic length method. In this study, the accuracy of characteristic length method on the prediction of failure ...A two-dimensioual stress analysis was developed to evaluate the failure of composite joints using characteristic length method. In this study, the accuracy of characteristic length method on the prediction of failure strength and failure mode using different failure criteria was investigated. The stresses required for evaluating the joints were computed from stress functions obtained from displacement expressions that satisfy boundary conditions of the hole. The available experimental data for joint strength in literature were compared with the predicted failure loads and modes of failure for different composite pinned joints. No single failure criterion utilized to evaluate the failure gave a universally best fit across the three joints evaluated. However, the accuracy of characterizing the joints failure varies with joint laminate and choice of failure criterions.展开更多
A distribution grid is generally characterized by a high R/X （resistance/reactance） ratio and it is radial in nature. By design, a distribution grid system is not an active network, and it is normally designed in su...A distribution grid is generally characterized by a high R/X （resistance/reactance） ratio and it is radial in nature. By design, a distribution grid system is not an active network, and it is normally designed in such a way that power flows from transmission system via distribution system to consumers. But in a situation when wind turbines are connected to the distribution grid, the power source will change from one source to two sources, in this case, network is said to be active. This may probably have an impact on the distribution grid to whenever the wind turbine is connected. The best way to know the impact of wind turbine on the distribution grid in question is by carrying out load flow analysis on that system with and without the connection of wind turbines. Two major fundamental calculations： the steady-state voltage variation at the PCC （point of common coupling） and the calculation of short-circuit power of the grid system at the POC （point of connection） are necessary before carrying out the load flow study on the distribution grid. This paper, therefore, considers these pre-load flow calculations that are necessary before carrying out load flow study on the test distribution grid. These calculations are carded out on a test distribution system.展开更多
In this paper, the heat transfer enhancement in a solar parabolic trough receiver tube with porous insert and non-uniform heat flux condition was investigated. A new optimization method, which couples genetic algorith...In this paper, the heat transfer enhancement in a solar parabolic trough receiver tube with porous insert and non-uniform heat flux condition was investigated. A new optimization method, which couples genetic algorithm(GA) and computational fluid dynamics(CFD) based on Socket communication, was proposed to optimize the configuration of porous insert. After the acquisition of the optimal porous inserts, some performance evaluation criterions such as synergy angle, entransy dissipation and exergy loss were introduced to discuss the heat transfer performance of the enhanced receiver tubes(ERTs) with optimal and referenced porous inserts. The results showed that, for a large range of properties of porous insert(including porosity and thermal conductivity) and Reynolds number, the heat-transfer performance of ERT with porous insert optimized by GA is always higher than that of the referenced ERTs. Better heat-transfer performance can further improve the solar-to-thermal energy conversion efficiency and mechanical property of the solar parabolic trough receiver. When some porous materials with high thermal conductivity are adopted, ERT can simultaneously obtain perfect thermal and thermo-hydraulic performance by using the same optimized porous insert, which cannot be achieved by using the referenced porous insert. In the view of those introduced evaluation criterions, using the optimized porous insert can obtain better synergy performance and lesser irreversibility of heat transfer than using the referenced porous insert. Entransy dissipation per unit energy transferred and exergy loss rate have equivalent effects on the evaluation of irreversibility of heat transfer process. These evaluation criterions can be used as optimization goals for enhancing the comprehensive performance of the solar parabolic trough receiver.展开更多
The evolution of electronic states in molecule has two origins: dynamical one produced by Schr¨odinger equation and kinematical one caused by base transformation due to nuclear motion.In current theories,the form...The evolution of electronic states in molecule has two origins: dynamical one produced by Schr¨odinger equation and kinematical one caused by base transformation due to nuclear motion.In current theories,the former gets analytic expression; the latter depends on heavy numerical calculation,which contains uncertainty.By using connection of fiber bundles,this paper establishes an analytic formula for the latter,and the numerical work is simplified.It shows the mathematical structure of molecule is fiber bundle.展开更多
The conventional bypass design is to implant a graft on the stenosed host artery allowing blood to flow bypass the stenotic artery. However, restenosis is a challenging problem which finally results in reoperation. Th...The conventional bypass design is to implant a graft on the stenosed host artery allowing blood to flow bypass the stenotic artery. However, restenosis is a challenging problem which finally results in reoperation. The purpose of this paper is to propose a new bypass graft design of coronary artery with an assistant graft for the treatment of coronary artery stenosis. An additional assistant graft was employed in the new design compared with the conventional ETS anastomosis. Numerical simulations were performed by means of finite volume method using computational fluid dynamics(CFD) solver. Results demonstrated that the new anastomoses model provided a more smooth flow at the distal ETS anastomosis without any stagnation point on anastomotic bed and vortex formation in the heel region. Oscillatory shear index(OSI) and time-averaged wall shear stress gradient(TAWSSG) at the artery bed of the distal ETS anastomosis were reduced. The coronary artery bypass graft with an assistant graft is feasible to improve the local hemodynamics and diminish the probability of restenosis in the treatment of coronary artery stenosis.展开更多
基金Project(50875263) supported by the National Natural Science Foundation of ChinaProject(2011CB706800) supported by the National Basic Research Program of ChinaProject(2010ssxt172) supported by the Natural Science Foundation of Hunan Province,China
文摘The analytical method based on "Hertz theory on normal contact of elastic solids" and the numerical method based on finite element method (FEM) calculating the contact stress of face-gear drive with spur involute pinion were introduced, and their relative errors are below 10%, except edge contact, which turns out that these two methods can compute contact stress of face-gear drive correctly and effectively. An agreement of the localized bearing contact stress is gotten for these two methods, making sure that the calculation results of FEM are reliable. The loaded meshing simulations of multi-tooth FEM model were developed, and the determination of the transmission error and the maximal load distribution factor of face-gear drive under torques were given. A formula for the maximal load distribution factor was proposed. By introducing the maximal load distribution factor in multi-tooth contact zone, a method for calculating the maximal contact stress in multi-tooth contact can be given. Compared to FEM, the results of these formulae are proved to be reliable, and the relative errors are below 10%.
文摘A calculation method of contact problem of plastic gears based on three parameter model of viscoelasticity material is presented. In this calculation method, the influence of temperature upon the property of plastics is considered and an iteration process of temperature-elasticity module-friction coefficient is proposed. From the rolling contact problem of two viscoelastic cylinders with parallel axis, a set of normal-tangential contact coupled integral equations is obtained. Through numerical treatment and normal-tangential iteration, the normal contact stress,tangential stress and contact width of plastic gears are acquired.
基金supported in part by the European Commission Marie Curie IRSES project "AdvIOT"the National Natural Science Foundation of China (NSFC) under grant No.61372103
文摘In network-connected UAV(NCUAV) communication systems, user authentication is replaced by platform identity authentication and integrity check because many NC-UAVs are operated without human intervention. Direct anonymous attestation(DAA) is an attractive cryptographic scheme that provides an elegant balance between platform authentication and anonymity. However, because of the low-level computing capability and limited transmission bandwidth in UAV, the existing DAA schemes are not suitable for NC-UAV communication systems. In this paper, we propose an enhanced DAA scheme with mutual authentication(MA-DAA scheme), which meets the security requirements of NC-UAV communication systems. The proposed MA-DAA scheme, which is based on asymmetric pairings, bundles the identities of trusted platform module(TPM) and Host to solve the malicious module changing attacks. Credential randomization, batch proof and verification, and mutual authentication are realized in the MA-DAA scheme. The computational workload in TPM and Host is reduced in order to meet the low computation and resource requirements in TPM and Host.The entire scheme and protocols are presented,and the security and efficiency of the proposed MA-DAA scheme are proved and analyzed.Our experiment results also confirm the high efficiency of the proposed scheme.
文摘A two-dimensioual stress analysis was developed to evaluate the failure of composite joints using characteristic length method. In this study, the accuracy of characteristic length method on the prediction of failure strength and failure mode using different failure criteria was investigated. The stresses required for evaluating the joints were computed from stress functions obtained from displacement expressions that satisfy boundary conditions of the hole. The available experimental data for joint strength in literature were compared with the predicted failure loads and modes of failure for different composite pinned joints. No single failure criterion utilized to evaluate the failure gave a universally best fit across the three joints evaluated. However, the accuracy of characterizing the joints failure varies with joint laminate and choice of failure criterions.
文摘A distribution grid is generally characterized by a high R/X （resistance/reactance） ratio and it is radial in nature. By design, a distribution grid system is not an active network, and it is normally designed in such a way that power flows from transmission system via distribution system to consumers. But in a situation when wind turbines are connected to the distribution grid, the power source will change from one source to two sources, in this case, network is said to be active. This may probably have an impact on the distribution grid to whenever the wind turbine is connected. The best way to know the impact of wind turbine on the distribution grid in question is by carrying out load flow analysis on that system with and without the connection of wind turbines. Two major fundamental calculations： the steady-state voltage variation at the PCC （point of common coupling） and the calculation of short-circuit power of the grid system at the POC （point of connection） are necessary before carrying out the load flow study on the distribution grid. This paper, therefore, considers these pre-load flow calculations that are necessary before carrying out load flow study on the test distribution grid. These calculations are carded out on a test distribution system.
基金supported by the Key Project of National Natural Science Foundation of China(Grant No.51436007)the Major Program of the National Natural Science Foundation of China(Grant No.51590902)
文摘In this paper, the heat transfer enhancement in a solar parabolic trough receiver tube with porous insert and non-uniform heat flux condition was investigated. A new optimization method, which couples genetic algorithm(GA) and computational fluid dynamics(CFD) based on Socket communication, was proposed to optimize the configuration of porous insert. After the acquisition of the optimal porous inserts, some performance evaluation criterions such as synergy angle, entransy dissipation and exergy loss were introduced to discuss the heat transfer performance of the enhanced receiver tubes(ERTs) with optimal and referenced porous inserts. The results showed that, for a large range of properties of porous insert(including porosity and thermal conductivity) and Reynolds number, the heat-transfer performance of ERT with porous insert optimized by GA is always higher than that of the referenced ERTs. Better heat-transfer performance can further improve the solar-to-thermal energy conversion efficiency and mechanical property of the solar parabolic trough receiver. When some porous materials with high thermal conductivity are adopted, ERT can simultaneously obtain perfect thermal and thermo-hydraulic performance by using the same optimized porous insert, which cannot be achieved by using the referenced porous insert. In the view of those introduced evaluation criterions, using the optimized porous insert can obtain better synergy performance and lesser irreversibility of heat transfer than using the referenced porous insert. Entransy dissipation per unit energy transferred and exergy loss rate have equivalent effects on the evaluation of irreversibility of heat transfer process. These evaluation criterions can be used as optimization goals for enhancing the comprehensive performance of the solar parabolic trough receiver.
文摘The evolution of electronic states in molecule has two origins: dynamical one produced by Schr¨odinger equation and kinematical one caused by base transformation due to nuclear motion.In current theories,the former gets analytic expression; the latter depends on heavy numerical calculation,which contains uncertainty.By using connection of fiber bundles,this paper establishes an analytic formula for the latter,and the numerical work is simplified.It shows the mathematical structure of molecule is fiber bundle.
文摘The conventional bypass design is to implant a graft on the stenosed host artery allowing blood to flow bypass the stenotic artery. However, restenosis is a challenging problem which finally results in reoperation. The purpose of this paper is to propose a new bypass graft design of coronary artery with an assistant graft for the treatment of coronary artery stenosis. An additional assistant graft was employed in the new design compared with the conventional ETS anastomosis. Numerical simulations were performed by means of finite volume method using computational fluid dynamics(CFD) solver. Results demonstrated that the new anastomoses model provided a more smooth flow at the distal ETS anastomosis without any stagnation point on anastomotic bed and vortex formation in the heel region. Oscillatory shear index(OSI) and time-averaged wall shear stress gradient(TAWSSG) at the artery bed of the distal ETS anastomosis were reduced. The coronary artery bypass graft with an assistant graft is feasible to improve the local hemodynamics and diminish the probability of restenosis in the treatment of coronary artery stenosis.
