Besides opening geometry, in situ stress and material properties, opening support also has significant effects on stress redistribution around a roadway. To investigate these effects of rock bolts on the stress redist...Besides opening geometry, in situ stress and material properties, opening support also has significant effects on stress redistribution around a roadway. To investigate these effects of rock bolts on the stress redistribution around a roadway, a series of numerical studies were carried out using the finite difference method. Since the stress changes around a roadway caused by rock bolting is small relative to the in situ stress, they cannot obviously be observed in stress contour plots. To overcome this difficulty, a new result processing methodology was developed using the contouring program Surfer. With this methodology, the effects of rock bolts on stress redistribution can obviously be analyzed. Numerical results show that in the three patterns of rock bolts installed in the roof, in the roof and the two lateral sides, and in all the four sides of the rectangular roadway, the maximum stress magnitude of the increase is 0.931 MPa, 2.46 MPa,and 6.5 MPa, respectively; the bolt number of 5 can form an integrated ground arch; the appropriate length and pre-tensioned force of the rock bolt is 2.0 m and 60 k N, respectively. What is more, the ground arch action under the function of rock bolting is able to be effectively examined. The rock bolts dramatically increase the minor principal stress around a roadway which results in significant increase in material strength. Consequently, the major principal stress that the material can carry will greatly increase.With adequate supports, an integrated ground arch which is critical for the stability of roadway will be formed around the roadway.展开更多
In order to study the safety factor and instability process of cohesive soil slope, the discrete element method(DEM) was applied. DEM software PFC2 D was used to simulate the triaxial test to study the influence of th...In order to study the safety factor and instability process of cohesive soil slope, the discrete element method(DEM) was applied. DEM software PFC2 D was used to simulate the triaxial test to study the influence of the particle micro parameters on the macroscopic characteristics of cohesive soil and calibrate the micro parameters of DEM model on this basis. Embankment slope stability analysis was carried out by strength reduction and gravity increase method, it is shown that the safety factor obtained by strength reduction method is more conservative, and the arc-shaped feature of the sliding surface under the gravity increase method is more obvious. Throughout the progressive failure process, the failure trends, maximum displacements, and velocity changes obtained by the two methods were consistent. When slope was destroyed, the upper part was cracked, the middle part was sheared, and the lower part was destroyed by extrusion. The conclusions of this paper can be applied to the safety factor calculation of cohesive soil slopes and the analysis of the instability process.展开更多
Standard finite element approaches are still ineffective in handling extreme material deformation, such as cases of large deformations and moving discontinuities due to severe mesh distortion. Among meshfree methods d...Standard finite element approaches are still ineffective in handling extreme material deformation, such as cases of large deformations and moving discontinuities due to severe mesh distortion. Among meshfree methods developed to overcome the ineffectiveness, Reproducing Kernel Particle Method (RKPM) has demonstrated its great suitability for structural analysis.This paper presents applications of RKPM in elasto-plastic problems after a review of meshfree methods and an introduction to RKPM. A slope stability problem in geotechnical engineering is analyzed as an illustrative case. The corresponding numerical simulations are carried out on an SGI Onyx3900 supercomputer. Comparison of the RKPM and the FEM under identical conditions showed that the RKPM is more suitable for problems where there exists extremely large strain such as in the case of slope sliding.展开更多
How to use the oven to bake delicious food is the most concerned problem of the designers and users of the oven.For this intent,this paper analyzed the heat distribution in the oven based on the basic operation princi...How to use the oven to bake delicious food is the most concerned problem of the designers and users of the oven.For this intent,this paper analyzed the heat distribution in the oven based on the basic operation principles and proceeded the data simulation of the temperature distribution on the rack section.Constructing the differential equation model of the temperature distribution changes in the pan when the oven works based on the heat radiation and heat transmission,based on the idea of utilizing cellular automation to simulate heat transfer process,used ANSYS software to proceed the numerical simulation analysis to the rectangular,round-cornered rectangular,elliptical and circular pans and giving out the instantaneous temperature distribution of the corresponding shapes of the pans.The temperature distribution of the rectangular and circular pans proves that the product gets overcooked easily at the corners and edges of rectangular pans but not of a round pan.展开更多
基金Financial support for this work provided by the National Key Scientific Apparatus Development of Special Item (No.2012YQ24012705)is deeply appreciated
文摘Besides opening geometry, in situ stress and material properties, opening support also has significant effects on stress redistribution around a roadway. To investigate these effects of rock bolts on the stress redistribution around a roadway, a series of numerical studies were carried out using the finite difference method. Since the stress changes around a roadway caused by rock bolting is small relative to the in situ stress, they cannot obviously be observed in stress contour plots. To overcome this difficulty, a new result processing methodology was developed using the contouring program Surfer. With this methodology, the effects of rock bolts on stress redistribution can obviously be analyzed. Numerical results show that in the three patterns of rock bolts installed in the roof, in the roof and the two lateral sides, and in all the four sides of the rectangular roadway, the maximum stress magnitude of the increase is 0.931 MPa, 2.46 MPa,and 6.5 MPa, respectively; the bolt number of 5 can form an integrated ground arch; the appropriate length and pre-tensioned force of the rock bolt is 2.0 m and 60 k N, respectively. What is more, the ground arch action under the function of rock bolting is able to be effectively examined. The rock bolts dramatically increase the minor principal stress around a roadway which results in significant increase in material strength. Consequently, the major principal stress that the material can carry will greatly increase.With adequate supports, an integrated ground arch which is critical for the stability of roadway will be formed around the roadway.
基金Project(51808116) supported by the National Natural Science Foundation of ChinaProject(BK20180404) supported by the Natural Science Foundation of Jiangsu Province, China+1 种基金Project(KFJ170106) supported by the Changsha University of Science & Technology via Open Fund of National Engineering Laboratory of Highway Maintenance Technology,ChinaProject(242020R40133) supported by Fundamental Research Funds for the Central Universities, China。
文摘In order to study the safety factor and instability process of cohesive soil slope, the discrete element method(DEM) was applied. DEM software PFC2 D was used to simulate the triaxial test to study the influence of the particle micro parameters on the macroscopic characteristics of cohesive soil and calibrate the micro parameters of DEM model on this basis. Embankment slope stability analysis was carried out by strength reduction and gravity increase method, it is shown that the safety factor obtained by strength reduction method is more conservative, and the arc-shaped feature of the sliding surface under the gravity increase method is more obvious. Throughout the progressive failure process, the failure trends, maximum displacements, and velocity changes obtained by the two methods were consistent. When slope was destroyed, the upper part was cracked, the middle part was sheared, and the lower part was destroyed by extrusion. The conclusions of this paper can be applied to the safety factor calculation of cohesive soil slopes and the analysis of the instability process.
文摘Standard finite element approaches are still ineffective in handling extreme material deformation, such as cases of large deformations and moving discontinuities due to severe mesh distortion. Among meshfree methods developed to overcome the ineffectiveness, Reproducing Kernel Particle Method (RKPM) has demonstrated its great suitability for structural analysis.This paper presents applications of RKPM in elasto-plastic problems after a review of meshfree methods and an introduction to RKPM. A slope stability problem in geotechnical engineering is analyzed as an illustrative case. The corresponding numerical simulations are carried out on an SGI Onyx3900 supercomputer. Comparison of the RKPM and the FEM under identical conditions showed that the RKPM is more suitable for problems where there exists extremely large strain such as in the case of slope sliding.
文摘How to use the oven to bake delicious food is the most concerned problem of the designers and users of the oven.For this intent,this paper analyzed the heat distribution in the oven based on the basic operation principles and proceeded the data simulation of the temperature distribution on the rack section.Constructing the differential equation model of the temperature distribution changes in the pan when the oven works based on the heat radiation and heat transmission,based on the idea of utilizing cellular automation to simulate heat transfer process,used ANSYS software to proceed the numerical simulation analysis to the rectangular,round-cornered rectangular,elliptical and circular pans and giving out the instantaneous temperature distribution of the corresponding shapes of the pans.The temperature distribution of the rectangular and circular pans proves that the product gets overcooked easily at the corners and edges of rectangular pans but not of a round pan.
