The retrogression kinetics for grain boundary precipitate （GBP） of 7A55 aluminum alloy was investigated by transmission electron microscopy （TEM） observation. The results reveal that the coarsening behavior of GBP...The retrogression kinetics for grain boundary precipitate （GBP） of 7A55 aluminum alloy was investigated by transmission electron microscopy （TEM） observation. The results reveal that the coarsening behavior of GBP obeys “LSW” theory, namely, the cube of GBP average size has a linear dependence relation to retrogression time, and the coarsening rate accelerates at the elevated retrogression temperature. The GBP coarsening activation energy Qo of （115.2±1.3） kJ/mol is obtained subsequently. Taking the retrogression treatment schedule of 190℃, 45 min derived from AA7055 thin plate as reference, the non-isothermal retrogression model for GBP coarsening behavior is established based on “LSW”theory and “iso-kinetics” solution, which includes an Arrhenius form equation. After that, the average size of GBP r（t） is predicted successfully at any non-isothermal process T（t） when the initial size of GBP r0 is given. Finally, the universal characterization method for the microstructure homogeneity along the thickness direction of TA55 aluminum alloy thick plate is also set up.展开更多
The morphology and formation mechanism of the substructure of martensite in TC21 alloy was investigated by XRD and TEM. The results showed that the martensitic transformation from β to α＂ occurs upon quenching afte...The morphology and formation mechanism of the substructure of martensite in TC21 alloy was investigated by XRD and TEM. The results showed that the martensitic transformation from β to α＂ occurs upon quenching after solution treatment between 960-1000 ℃. The antiphase boundary （APB）-like structure was observed clearly in the α＂ martensite plates. The APB-like contrasts exist along the （001） and （020） planes of α＂ martensite. This APB-like structure of α＂ martensite was identified as a kind of stacking fault with an APB-like morphology induced by martensitic transformation and not by order/disorder transition. During martensitic transformation, martensitic domains nucleate and grow, eventually encounter each other, resulting in the formation of the APBdike contrast.展开更多
Based on the Karma model and the Eggleston regularization technique of the strong interfacial energy anisotropy, a phase-field model was established for HCP materials. An explicit finite difference numerical method wa...Based on the Karma model and the Eggleston regularization technique of the strong interfacial energy anisotropy, a phase-field model was established for HCP materials. An explicit finite difference numerical method was used to solve phase field model and simulate the dendrite growth behaviors of HCP materials. Results indicate that the dendrite morphology presents obvious six-fold symmetry, and discontinuity in the variation of interface orientation occurs, resulting in a fact that the corners were formed at the tips of the main stem and side branches. When the interfacial energy anisotropy strength is lower than the critical value（1/35）, the steady-state tip velocity of dendrite increases with anisotropy as expected. As the anisotropy strength crosses the critical value, the steady-state tip velocity drops down by about 0.89%. With further increase in anisotropy strength, the steady-state tip velocity increases and reaches the maximum value at anisotropy strength of 0.04, then decreases.展开更多
An important step for achieving the knowledge-based design freedom on nano-and interfacial materials is attained by elucidating the related surface and interface thermodynamics from the first principles so as to allow...An important step for achieving the knowledge-based design freedom on nano-and interfacial materials is attained by elucidating the related surface and interface thermodynamics from the first principles so as to allow engineering the microstructures for desired properties through smartly designing fabrication processing parameters.This is demonstrated for SnO2 nano-particle surfaces and also a technologically important Ag-SnO2 interface fabricated by in-situ internal oxidation.Based on defect thermodynamics,we first modeled and calculated the equilibrium surface and interface structures,and as well corresponding properties,as a function of the ambient temperature and oxygen partial pressure.A series of first principles energetics calculations were then performed to construct the equilibrium surface and interface phase diagrams,to describe the environment dependence of the microstructures and properties of the surfaces and interfaces during fabrication and service conditions.The use and potential application of these phase diagrams as a process design tool were suggested and discussed.展开更多
The phase field method was applied to study the microstructure evolution of Ni4Ti3 precipitates during stress-free and stress-assisted aging of bi-crystalline NiTi shape memory alloys （SAMs） with two different initi...The phase field method was applied to study the microstructure evolution of Ni4Ti3 precipitates during stress-free and stress-assisted aging of bi-crystalline NiTi shape memory alloys （SAMs） with two different initial Ni-contents of 51.5% and 52.5% （mole fraction）, respectively. The simulation results show that, during stress-free aging of the NiTi alloy with a low supersaturation of Ni （i.e., Ti-51.5%Ni）, the Ni4Ti3 precipitates exhibit a heterogeneous distribution with a high number density of particles at the grain boundary, leaving most of the grain interiors free of precipitates; while for the NiTi alloy with a high supersaturation of Ni （i.e., Ti-52.5%Ni）, the Ni4Ti3 precipitates show a homogeneous distribution across the entire simulation system. The stress-assisted aging can give rise to homogeneous distribution of the precipitates, regardless of the initial Ni-content; however, the distribution of variant type within the two grains is heterogeneous.展开更多
Deformation twinning, i.e., twin nucleation and twin growth （or twin boundary migration, TBM） activated by impinged basal slip at a symmetrical tilt grain boundary in HCP Mg, was examined with molecular dynamics （M...Deformation twinning, i.e., twin nucleation and twin growth （or twin boundary migration, TBM） activated by impinged basal slip at a symmetrical tilt grain boundary in HCP Mg, was examined with molecular dynamics （MD） simulations. The results show that the {1^-1^-21}-type twinning acts as the most preferential mode of twinning. Once such twins are formed, they are almost ready to grow. The TBM of such twins is led by pure atomic shuffling events. A secondary mode of twinning can also occur in our simulations. The {112^-2} twinning is observed at 10 K as the secondary twin. This secondary mode of twinning shows different energy barriers for nucleation as well as for growth compared with the {1^-1^-21}-type twining. In particular, TBMs in this case is triggered intrinsically by pyramidal slip at its twin boundary.展开更多
Effect of isothermal holding treatment in the solidification process on the microstructure of Ti-6Al-4V alloy was studied by temperature controlled induced melting apparatus. The result shows that with isothermal hold...Effect of isothermal holding treatment in the solidification process on the microstructure of Ti-6Al-4V alloy was studied by temperature controlled induced melting apparatus. The result shows that with isothermal holding treatment above the β transus temperature during solidification, the colony structure consisting of parallel lamellae was obtained. While the isothermal holding treatment was set at 960 °C, a unique bi-modal microstructure consisting of coarse primary α and fine secondary lamellar α was obtained. The primary lamellar α tended to break into several pieces, globularize and present equiaxed morphology. The formation mechanism of the equiaxed α can be explained with the atom immigration, high density dislocations, combined action with the interface tension of formed α phase during the isothermal holding treatment. After the isothermal holding, the retained β matrix transformed into fine lamellar α, thus, bi-modal microstructure was acquired. Compared with the lamellar structure, the grain boundary α presented discontinuously and cannot be distinguished from the primary α lamellae easily. The size of colonies α was greatly decreased. The microstructure tended to be much more homogeneous in the whole section of the samples.展开更多
The effects of sub-grain boundaries on the quenching sensitivity and the precipitation behavior in Al-7.01Zn-1.26Mg- 1.43Cu alloy were investigated by an end-quenching test. Specimens were solution treated at 440 ℃ a...The effects of sub-grain boundaries on the quenching sensitivity and the precipitation behavior in Al-7.01Zn-1.26Mg- 1.43Cu alloy were investigated by an end-quenching test. Specimens were solution treated at 440 ℃ and 480 ℃ to get different recrystallization fractions, respectively. The results show that the maximum hardness value of the Al-Zn-Mg-Cu alloy can be improved by the sub-grain boundaries, but the depth of age-hardening layer decreases significantly. The precipitation temperature and the activation energy are reduced by the changes of surface energy, which is induced by sub-grain boundaries. So, the precipitation process from η phase to η phase becomes much easier. In this way, an increase in the number of sub-grain boundaries promotes the precipitation of MgZn2 particles, especially η＇-MgZn2.展开更多
The Zn,Cu,and Sc contents of 7xxx Al alloys were adjusted according to the chemical composition of a 7085 Al alloy,and the effects of Zn and Cu contents and Sc addition on the microstructures,hardness,and quench sensi...The Zn,Cu,and Sc contents of 7xxx Al alloys were adjusted according to the chemical composition of a 7085 Al alloy,and the effects of Zn and Cu contents and Sc addition on the microstructures,hardness,and quench sensitivity of the 7xxx Al alloys were studied.The alloys with high Zn content and Sc addition exhibited higher hardness than the 7085 alloy at the position 3 mm away from the quenching end.The density ofηand T phases increased with the increase in Zn and Cu contents,and the Sc addition led to the formation of the Y phase and moreηphases at the position 120 mm away from the quenching end.Compared with the 7085 alloy,the high Zn−high Cu and Sc-added alloys exhibited higher quench sensitivity,while the simultaneous increase in Zn content and decrease in Cu content could enhance the hardness and reduce the quench sensitivity of the 7085 alloy.展开更多
The 12 mm-thick Ti−6Al−4V(TC4)titanium alloy plates were welded using keyhole tungsten inert gas(K-TIG)welding at various heat inputs.The microstructure,grain boundary(GB)characteristics and mechanical properties of t...The 12 mm-thick Ti−6Al−4V(TC4)titanium alloy plates were welded using keyhole tungsten inert gas(K-TIG)welding at various heat inputs.The microstructure,grain boundary(GB)characteristics and mechanical properties of the weld metal zone(WMZ)were analyzed.The test results show that the K-TIG welds are well formed,and no obvious defects are observed when the heat input is 2.30−2.62 kJ/mm.When the heat input gradually increases,αlaths increase in length,andα′phase and residualβphase are reduced.The electron backscatter diffraction(EBSD)test results indicate that the high-angle GB proportion in the WMZ increases with the increase of heat input.The tensile strength of the WMZ gradually decreases and the elongation of the WMZ increases when the heat input increases from 2.30 to 2.62 kJ/mm.The impact toughness of the WMZ increases as the heat input increases.展开更多
The diffusion-multiple method was used to determine the composition of Ti−6Al−4V−xMo−yZr alloy(0.45<x<12,0.5<y<14,wt.%),which can obtain an ultrafine α phase.Results show that Ti−6Al−4V−5Mo−7Zr alloy can ...The diffusion-multiple method was used to determine the composition of Ti−6Al−4V−xMo−yZr alloy(0.45<x<12,0.5<y<14,wt.%),which can obtain an ultrafine α phase.Results show that Ti−6Al−4V−5Mo−7Zr alloy can obtain an ultrafineαphase by using the α″phase assisted nucleation.The bimodal microstructure obtained with the heat-treatment process can confer the alloy with a good balance between the strength and plasticity.The deformation mechanism is the dislocation slip and the{1101}twinning in the primary α phase.The strengthening mechanism is α/β interface strengthening.The interface of(0001)α/(110)β has a platform−step structure,whereas(1120)α/(111)βinterface is flat with no steps.展开更多
Numerical simulations based on a new regularized phase-field model were presented, to simulate the solidification of hexagonal close-packed materials with strong interfacial energy anisotropies. Results show that the ...Numerical simulations based on a new regularized phase-field model were presented, to simulate the solidification of hexagonal close-packed materials with strong interfacial energy anisotropies. Results show that the crystal grows into facet dendrites,displaying six-fold symmetry. The size of initial crystals has an effect on the branching-off of the principal branch tip along the<100> direction, which is eliminated by setting the b/a(a and b are the semi-major and semi-minor sizes in the initial elliptical crystals, respectively) value to be less than or equal to 1. With an increase in the undercooling value, the equilibrium morphology of the crystal changes from a star-like shape to facet dendrites without side branches. The steady-state tip velocity increases exponentially when the dimensionless undercooling is below the critical value. With a further increase in the undercooling value, the equilibrium morphology of the crystal grows into a developed side-branch structure, and the steady-state tip velocity of the facet dendrites increases linearly. The facet dendrite growth has controlled diffusion and kinetics.展开更多
Trace amount of Sr(0.05 wt.%)was added into the hypoeutectic Al−Si(3−12 wt.%Si)alloys to modify their microstructure and improve thermal conductivity.The results showed that the thermal conductivity of hypoeutectic Al...Trace amount of Sr(0.05 wt.%)was added into the hypoeutectic Al−Si(3−12 wt.%Si)alloys to modify their microstructure and improve thermal conductivity.The results showed that the thermal conductivity of hypoeutectic Al−Si alloys was improved by Sr modification,and the increment and increasing rate of the thermal conductivity gradually increased with Si content increasing.The improvement of thermal conductivity was primarily related to the morphology variation of eutectic Si phases.In Sr-modified Al−Si alloys,the morphology of eutectic Si phases was a mixed morphology of fiber structure and fine flaky structure,and the proportion of the fine flaky eutectic Si phases gradually decreased with Si content increasing.Under the Si content reaching 9 wt.%,the proportion of fine flaky eutectic Si phases was nearly negligible in Sr-modified alloys.Correspondingly,the increment and increasing rate of thermal conductivity of Sr-modified alloys reached the maximum and tended to be stable.展开更多
For 7475 Al alloy,there were micrographs showing filaments or whiskers formation during the separation stage of superplastic elongation.This indicates the presence of liquid phase which accommodates grain boundary sli...For 7475 Al alloy,there were micrographs showing filaments or whiskers formation during the separation stage of superplastic elongation.This indicates the presence of liquid phase which accommodates grain boundary sliding to reach superplasticity.On the other hand,there is no such phenomenon reported regarding Mg alloy in literatures.Scanning electron microscopic(SEM)fractography exceptionally exhibits a mark of grain boundary sliding and its accommodating mechanism of inter-granular liquid phase.Under the testing conditions of 350℃ and 1×10- 4s -1,the initially fine-grained structure(3.7μm)yields 642%superplastic elongation and exhibits fluffy appearance on the fractured surface.For other specimens showing less superplasticity,their fractured surfaces exhibit partial fluffy appearance.展开更多
The microstructure of steels treated by Q&P(quenching and partitioning) process was characterized,a method of controlling retained austenite fraction based on inhomogeneous martensitic transformation was proposed,...The microstructure of steels treated by Q&P(quenching and partitioning) process was characterized,a method of controlling retained austenite fraction based on inhomogeneous martensitic transformation was proposed,and the mechanical properties of steels treated by Q&P process were measured.The results show that the microstructure of the studied steels is mainly composed of initial martensite,fresh martensite and retained austenite.The initial marteniste formed at the first quenching step is easily etched;the fresh martensite formed at the final quenching step looks like 'blocky' type phase,and the retained austenite is mainly located on the packet boundary and initial austenite grain boundary.The inhomogeneous microstructure causes the experimental optimum quenching temperature corresponding to maximum retained austenite fraction to be higher than the calculation based on CPE(constrained paraequilibrium) model.The product of tensile strength and total tensile elongation is 47.5 GPa%,and tensile strength of 1760 MPa was obtained for the steel with carbon content of 0.51 wt%.The TRIP(transformation induced plasticity) effects of the large fractioned metastable austenite make a main contribution to the high ductility improvement,and the martensitic matrix provides high strength.展开更多
Liquid ternary Fe47.5Cu47.5Sn5 alloy displayed dual solidification mechanisms when it was undercooled by up to 329 K （0.19TL）. Below a critical undercooling of about 196 K, it solidified just like a normal peritecti...Liquid ternary Fe47.5Cu47.5Sn5 alloy displayed dual solidification mechanisms when it was undercooled by up to 329 K （0.19TL）. Below a critical undercooling of about 196 K, it solidified just like a normal peritectic alloy, even though metastable phase separation occurred to a microscopic extent. Once bulk undercooling exceeds 196 K, macroscopic segregation played a domi- nant role in solidification. In both cases, the solidification process was always characterized by two successive peritectic trans- formations： firstly primary yFe dendrites reacted with liquid phase to form （Cu） phase, and subsequently the （Cu） phase reacted with residual liquid phase to yield β-Cu5.6Sn intermetallic compound. The primary yFe dendrites achieved a maximum growth velocity of 400 mm/s and experienced a growth kinetics transition as a result of macrosegregation. Since the （Cu） phase was both the product phase of the first peritectic transformation and also the reactant phase for the second peritectic transformation, it appeared as two layers in solidification microstructures due to the microsegregation of Sn solute. The boundary continuity between the macroscopically separated Fe-rich and Cu-ricb zones was enhanced with the increase of undercooling.展开更多
Vapor-liquid phase transition occurs via a nucleation process, and depending on the role of foreign objects, nucleation can be either homogeneous or heterogeneous. In this review, we focus on the recently developed co...Vapor-liquid phase transition occurs via a nucleation process, and depending on the role of foreign objects, nucleation can be either homogeneous or heterogeneous. In this review, we focus on the recently developed constrained lattice density functional theory （CLDFT） and its applications on vapor-liquid nucleation. We also review the recent theoretical advance on the stability of nanobubbles. Based on CLDFT, a pinning and supersaturation mechanism has proposed to interpret the surprising stability of surface nanobubbles. The mechanism can interpret most characteristics of nanobubbles. More importantly, the mechanism suggests that the critical nucleus can be stabilized under the condition of contact line pinning. Thus, CLDFT studies provide an alternative way to measure the critical nucleus that is difficult to measure experimentally in the bulk solution, through stabilizing it with surface roughness or heterogeneities.展开更多
基金Project(2012CB619505)supported by the National Basic Research Program of China
文摘The retrogression kinetics for grain boundary precipitate （GBP） of 7A55 aluminum alloy was investigated by transmission electron microscopy （TEM） observation. The results reveal that the coarsening behavior of GBP obeys “LSW” theory, namely, the cube of GBP average size has a linear dependence relation to retrogression time, and the coarsening rate accelerates at the elevated retrogression temperature. The GBP coarsening activation energy Qo of （115.2±1.3） kJ/mol is obtained subsequently. Taking the retrogression treatment schedule of 190℃, 45 min derived from AA7055 thin plate as reference, the non-isothermal retrogression model for GBP coarsening behavior is established based on “LSW”theory and “iso-kinetics” solution, which includes an Arrhenius form equation. After that, the average size of GBP r（t） is predicted successfully at any non-isothermal process T（t） when the initial size of GBP r0 is given. Finally, the universal characterization method for the microstructure homogeneity along the thickness direction of TA55 aluminum alloy thick plate is also set up.
基金Project (2011AA030101) supported by the High-tech Research and Development Program of China
文摘The morphology and formation mechanism of the substructure of martensite in TC21 alloy was investigated by XRD and TEM. The results showed that the martensitic transformation from β to α＂ occurs upon quenching after solution treatment between 960-1000 ℃. The antiphase boundary （APB）-like structure was observed clearly in the α＂ martensite plates. The APB-like contrasts exist along the （001） and （020） planes of α＂ martensite. This APB-like structure of α＂ martensite was identified as a kind of stacking fault with an APB-like morphology induced by martensitic transformation and not by order/disorder transition. During martensitic transformation, martensitic domains nucleate and grow, eventually encounter each other, resulting in the formation of the APBdike contrast.
基金Project(10834015)supported by the National Natural Science Foundation of ChinaProject(12SKY01-1)supported by the Doctoral Fund of Shangluo University,China
文摘Based on the Karma model and the Eggleston regularization technique of the strong interfacial energy anisotropy, a phase-field model was established for HCP materials. An explicit finite difference numerical method was used to solve phase field model and simulate the dendrite growth behaviors of HCP materials. Results indicate that the dendrite morphology presents obvious six-fold symmetry, and discontinuity in the variation of interface orientation occurs, resulting in a fact that the corners were formed at the tips of the main stem and side branches. When the interfacial energy anisotropy strength is lower than the critical value（1/35）, the steady-state tip velocity of dendrite increases with anisotropy as expected. As the anisotropy strength crosses the critical value, the steady-state tip velocity drops down by about 0.89%. With further increase in anisotropy strength, the steady-state tip velocity increases and reaches the maximum value at anisotropy strength of 0.04, then decreases.
基金Project(51171211) supported by the National Natural Science Foundation of ChinaProject(NCET-10-0837) supported by the Chinese Ministry of Education's Supportive Program for New Century Excellent Talents in UniversitiesProject(2006BAE03B03) supported by the Chinese National Science and Technology Supportive Program
文摘An important step for achieving the knowledge-based design freedom on nano-and interfacial materials is attained by elucidating the related surface and interface thermodynamics from the first principles so as to allow engineering the microstructures for desired properties through smartly designing fabrication processing parameters.This is demonstrated for SnO2 nano-particle surfaces and also a technologically important Ag-SnO2 interface fabricated by in-situ internal oxidation.Based on defect thermodynamics,we first modeled and calculated the equilibrium surface and interface structures,and as well corresponding properties,as a function of the ambient temperature and oxygen partial pressure.A series of first principles energetics calculations were then performed to construct the equilibrium surface and interface phase diagrams,to describe the environment dependence of the microstructures and properties of the surfaces and interfaces during fabrication and service conditions.The use and potential application of these phase diagrams as a process design tool were suggested and discussed.
基金Project (50871039) supported by the National Natural Science Foundation of ChinaProject (2011ZB0007) supported by the Fundamental Research Funds for Central Universities of ChinaProject (201104090881) support by China Postdoctoral Science Foundation
文摘The phase field method was applied to study the microstructure evolution of Ni4Ti3 precipitates during stress-free and stress-assisted aging of bi-crystalline NiTi shape memory alloys （SAMs） with two different initial Ni-contents of 51.5% and 52.5% （mole fraction）, respectively. The simulation results show that, during stress-free aging of the NiTi alloy with a low supersaturation of Ni （i.e., Ti-51.5%Ni）, the Ni4Ti3 precipitates exhibit a heterogeneous distribution with a high number density of particles at the grain boundary, leaving most of the grain interiors free of precipitates; while for the NiTi alloy with a high supersaturation of Ni （i.e., Ti-52.5%Ni）, the Ni4Ti3 precipitates show a homogeneous distribution across the entire simulation system. The stress-assisted aging can give rise to homogeneous distribution of the precipitates, regardless of the initial Ni-content; however, the distribution of variant type within the two grains is heterogeneous.
基金Project(2012CB932202)supported by the National Basic Research Program of ChinaProjects(50890174,50971088)supported by the National Natural Science Foundation of China
文摘Deformation twinning, i.e., twin nucleation and twin growth （or twin boundary migration, TBM） activated by impinged basal slip at a symmetrical tilt grain boundary in HCP Mg, was examined with molecular dynamics （MD） simulations. The results show that the {1^-1^-21}-type twinning acts as the most preferential mode of twinning. Once such twins are formed, they are almost ready to grow. The TBM of such twins is led by pure atomic shuffling events. A secondary mode of twinning can also occur in our simulations. The {112^-2} twinning is observed at 10 K as the secondary twin. This secondary mode of twinning shows different energy barriers for nucleation as well as for growth compared with the {1^-1^-21}-type twining. In particular, TBMs in this case is triggered intrinsically by pyramidal slip at its twin boundary.
基金Project(3102014JCQ01026)supported by the Fundamental Research Fund for the Central Universities,ChinaProject(B08040)supported by the Program of Introducing Talents of Discipline to Universities,China
文摘Effect of isothermal holding treatment in the solidification process on the microstructure of Ti-6Al-4V alloy was studied by temperature controlled induced melting apparatus. The result shows that with isothermal holding treatment above the β transus temperature during solidification, the colony structure consisting of parallel lamellae was obtained. While the isothermal holding treatment was set at 960 °C, a unique bi-modal microstructure consisting of coarse primary α and fine secondary lamellar α was obtained. The primary lamellar α tended to break into several pieces, globularize and present equiaxed morphology. The formation mechanism of the equiaxed α can be explained with the atom immigration, high density dislocations, combined action with the interface tension of formed α phase during the isothermal holding treatment. After the isothermal holding, the retained β matrix transformed into fine lamellar α, thus, bi-modal microstructure was acquired. Compared with the lamellar structure, the grain boundary α presented discontinuously and cannot be distinguished from the primary α lamellae easily. The size of colonies α was greatly decreased. The microstructure tended to be much more homogeneous in the whole section of the samples.
基金Projects(2010CB731700,2012CB619500)supported by the National Basic Research Program of ChinaProject(51375503)supported by the National Natural Science Foundation of China
文摘The effects of sub-grain boundaries on the quenching sensitivity and the precipitation behavior in Al-7.01Zn-1.26Mg- 1.43Cu alloy were investigated by an end-quenching test. Specimens were solution treated at 440 ℃ and 480 ℃ to get different recrystallization fractions, respectively. The results show that the maximum hardness value of the Al-Zn-Mg-Cu alloy can be improved by the sub-grain boundaries, but the depth of age-hardening layer decreases significantly. The precipitation temperature and the activation energy are reduced by the changes of surface energy, which is induced by sub-grain boundaries. So, the precipitation process from η phase to η phase becomes much easier. In this way, an increase in the number of sub-grain boundaries promotes the precipitation of MgZn2 particles, especially η＇-MgZn2.
基金The authors are grateful for the financial supports from the Science and Technology Major Project of Guangxi,China(GKAA17202007).
文摘The Zn,Cu,and Sc contents of 7xxx Al alloys were adjusted according to the chemical composition of a 7085 Al alloy,and the effects of Zn and Cu contents and Sc addition on the microstructures,hardness,and quench sensitivity of the 7xxx Al alloys were studied.The alloys with high Zn content and Sc addition exhibited higher hardness than the 7085 alloy at the position 3 mm away from the quenching end.The density ofηand T phases increased with the increase in Zn and Cu contents,and the Sc addition led to the formation of the Y phase and moreηphases at the position 120 mm away from the quenching end.Compared with the 7085 alloy,the high Zn−high Cu and Sc-added alloys exhibited higher quench sensitivity,while the simultaneous increase in Zn content and decrease in Cu content could enhance the hardness and reduce the quench sensitivity of the 7085 alloy.
基金The authors are grateful for the financial supports from the Key Research and Development Program of Guangdong Province,China(2020B090928003)the Natural Science Foundation of Guangdong Province,China(2020A1515011050)+1 种基金the Science and Technology Base and Talent Special Project of Guangxi Province,China(AD19245150)Guangxi University of Science and Technology Doctoral Fund,China(19Z27).
文摘The 12 mm-thick Ti−6Al−4V(TC4)titanium alloy plates were welded using keyhole tungsten inert gas(K-TIG)welding at various heat inputs.The microstructure,grain boundary(GB)characteristics and mechanical properties of the weld metal zone(WMZ)were analyzed.The test results show that the K-TIG welds are well formed,and no obvious defects are observed when the heat input is 2.30−2.62 kJ/mm.When the heat input gradually increases,αlaths increase in length,andα′phase and residualβphase are reduced.The electron backscatter diffraction(EBSD)test results indicate that the high-angle GB proportion in the WMZ increases with the increase of heat input.The tensile strength of the WMZ gradually decreases and the elongation of the WMZ increases when the heat input increases from 2.30 to 2.62 kJ/mm.The impact toughness of the WMZ increases as the heat input increases.
基金Projects(2016YFB0701301,2018YFB0704100)supported by the National Key Technologies R&D Program of ChinaProjects(51901251,51671218,51501229)supported by the National Natural Science Foundation of ChinaProject(2020JJ5750)supported by the Natural Science Foundation of Hunan Province,China。
文摘The diffusion-multiple method was used to determine the composition of Ti−6Al−4V−xMo−yZr alloy(0.45<x<12,0.5<y<14,wt.%),which can obtain an ultrafine α phase.Results show that Ti−6Al−4V−5Mo−7Zr alloy can obtain an ultrafineαphase by using the α″phase assisted nucleation.The bimodal microstructure obtained with the heat-treatment process can confer the alloy with a good balance between the strength and plasticity.The deformation mechanism is the dislocation slip and the{1101}twinning in the primary α phase.The strengthening mechanism is α/β interface strengthening.The interface of(0001)α/(110)β has a platform−step structure,whereas(1120)α/(111)βinterface is flat with no steps.
基金Project(10834015) supported by the National Natural Science Foundation of ChinaProject(12SKY01-1) supported by the Doctoral Fund of Shangluo University,ChinaProject(14JK1223) supported by the Scientific Research Program of Shaanxi Provincial Education Department,China
文摘Numerical simulations based on a new regularized phase-field model were presented, to simulate the solidification of hexagonal close-packed materials with strong interfacial energy anisotropies. Results show that the crystal grows into facet dendrites,displaying six-fold symmetry. The size of initial crystals has an effect on the branching-off of the principal branch tip along the<100> direction, which is eliminated by setting the b/a(a and b are the semi-major and semi-minor sizes in the initial elliptical crystals, respectively) value to be less than or equal to 1. With an increase in the undercooling value, the equilibrium morphology of the crystal changes from a star-like shape to facet dendrites without side branches. The steady-state tip velocity increases exponentially when the dimensionless undercooling is below the critical value. With a further increase in the undercooling value, the equilibrium morphology of the crystal grows into a developed side-branch structure, and the steady-state tip velocity of the facet dendrites increases linearly. The facet dendrite growth has controlled diffusion and kinetics.
基金Project(2013B090500091)supported by Industry-University-Research Combined Project of Guangdong Province,ChinaProject(20180358)supported by the Shenzhen Jiansheng Technology Inc.Cooperation Project,China。
文摘Trace amount of Sr(0.05 wt.%)was added into the hypoeutectic Al−Si(3−12 wt.%Si)alloys to modify their microstructure and improve thermal conductivity.The results showed that the thermal conductivity of hypoeutectic Al−Si alloys was improved by Sr modification,and the increment and increasing rate of the thermal conductivity gradually increased with Si content increasing.The improvement of thermal conductivity was primarily related to the morphology variation of eutectic Si phases.In Sr-modified Al−Si alloys,the morphology of eutectic Si phases was a mixed morphology of fiber structure and fine flaky structure,and the proportion of the fine flaky eutectic Si phases gradually decreased with Si content increasing.Under the Si content reaching 9 wt.%,the proportion of fine flaky eutectic Si phases was nearly negligible in Sr-modified alloys.Correspondingly,the increment and increasing rate of thermal conductivity of Sr-modified alloys reached the maximum and tended to be stable.
文摘For 7475 Al alloy,there were micrographs showing filaments or whiskers formation during the separation stage of superplastic elongation.This indicates the presence of liquid phase which accommodates grain boundary sliding to reach superplasticity.On the other hand,there is no such phenomenon reported regarding Mg alloy in literatures.Scanning electron microscopic(SEM)fractography exceptionally exhibits a mark of grain boundary sliding and its accommodating mechanism of inter-granular liquid phase.Under the testing conditions of 350℃ and 1×10- 4s -1,the initially fine-grained structure(3.7μm)yields 642%superplastic elongation and exhibits fluffy appearance on the fractured surface.For other specimens showing less superplasticity,their fractured surfaces exhibit partial fluffy appearance.
基金supported by a grant from the National Basic Research Program of China (973 Program) (Grant No. 2010CB630803)the Youth Science Funds of China (Grant No. 51101036)
文摘The microstructure of steels treated by Q&P(quenching and partitioning) process was characterized,a method of controlling retained austenite fraction based on inhomogeneous martensitic transformation was proposed,and the mechanical properties of steels treated by Q&P process were measured.The results show that the microstructure of the studied steels is mainly composed of initial martensite,fresh martensite and retained austenite.The initial marteniste formed at the first quenching step is easily etched;the fresh martensite formed at the final quenching step looks like 'blocky' type phase,and the retained austenite is mainly located on the packet boundary and initial austenite grain boundary.The inhomogeneous microstructure causes the experimental optimum quenching temperature corresponding to maximum retained austenite fraction to be higher than the calculation based on CPE(constrained paraequilibrium) model.The product of tensile strength and total tensile elongation is 47.5 GPa%,and tensile strength of 1760 MPa was obtained for the steel with carbon content of 0.51 wt%.The TRIP(transformation induced plasticity) effects of the large fractioned metastable austenite make a main contribution to the high ductility improvement,and the martensitic matrix provides high strength.
基金supported by the National Natural Science Foundation of China (Grant Nos. 51101123 and 50971105)the Fundamental Research Fund of Northwestern Polytechnical University (GrantNo. JC201050)
文摘Liquid ternary Fe47.5Cu47.5Sn5 alloy displayed dual solidification mechanisms when it was undercooled by up to 329 K （0.19TL）. Below a critical undercooling of about 196 K, it solidified just like a normal peritectic alloy, even though metastable phase separation occurred to a microscopic extent. Once bulk undercooling exceeds 196 K, macroscopic segregation played a domi- nant role in solidification. In both cases, the solidification process was always characterized by two successive peritectic trans- formations： firstly primary yFe dendrites reacted with liquid phase to form （Cu） phase, and subsequently the （Cu） phase reacted with residual liquid phase to yield β-Cu5.6Sn intermetallic compound. The primary yFe dendrites achieved a maximum growth velocity of 400 mm/s and experienced a growth kinetics transition as a result of macrosegregation. Since the （Cu） phase was both the product phase of the first peritectic transformation and also the reactant phase for the second peritectic transformation, it appeared as two layers in solidification microstructures due to the microsegregation of Sn solute. The boundary continuity between the macroscopically separated Fe-rich and Cu-ricb zones was enhanced with the increase of undercooling.
基金supported by State Key Laboratory of Chemical Engineering (SKL-CHE-12B02)the National Natural Science Foundation of China (21276007)
文摘Vapor-liquid phase transition occurs via a nucleation process, and depending on the role of foreign objects, nucleation can be either homogeneous or heterogeneous. In this review, we focus on the recently developed constrained lattice density functional theory （CLDFT） and its applications on vapor-liquid nucleation. We also review the recent theoretical advance on the stability of nanobubbles. Based on CLDFT, a pinning and supersaturation mechanism has proposed to interpret the surprising stability of surface nanobubbles. The mechanism can interpret most characteristics of nanobubbles. More importantly, the mechanism suggests that the critical nucleus can be stabilized under the condition of contact line pinning. Thus, CLDFT studies provide an alternative way to measure the critical nucleus that is difficult to measure experimentally in the bulk solution, through stabilizing it with surface roughness or heterogeneities.
