期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
连续气相还原法生产钛粉
1
作者 廖际常 《稀有金属快报》 CSCD 1999年第11期13-14,共2页
关键词 钛粉 生产 连续气相还原法
在线阅读 下载PDF
直接气相还原法制备金属铱及其氧还原活性
2
作者 汪广进 程凤 潘牧 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2013年第3期616-620,共5页
采用直接气相还原法制备了金属铱催化剂。通过X射线衍射(XRD)分析了金属铱的物相组成,采用循环伏安(CV)和线性电势扫描(LSV)等电化学手段评价了金属铱的电化学性能。XRD分析结果表明在氨气气氛中,氧化铱经400℃还原3h能完全转化为金属... 采用直接气相还原法制备了金属铱催化剂。通过X射线衍射(XRD)分析了金属铱的物相组成,采用循环伏安(CV)和线性电势扫描(LSV)等电化学手段评价了金属铱的电化学性能。XRD分析结果表明在氨气气氛中,氧化铱经400℃还原3h能完全转化为金属铱单质。CV和LSV结果表明金属铱具有良好的氧还原电催化活性,且其氧还原起始电压可以达到0.51V(vs.SCE)。从原子状态角度考虑,金属铱的d带空穴多于金属铂,最终导致金属铱的氧还原电催化活性低于金属铂,但金属铱具有与金属铂相似的氧还原电催化路径。 展开更多
关键词 直接气相还原法 还原反应 原子状态
原文传递
连续气相还原法生产钛粉
3
作者 马秀芳 《现代材料动态》 2000年第1期13-13,14,共2页
关键词 钛粉 连续气相还原法 生产工艺
原文传递
气-固相还原硫酸盐制备系列硫化物纳米晶 被引量:1
4
作者 柴多里 刘忠煌 杨保俊 《无机化学学报》 SCIE CAS CSCD 北大核心 2010年第1期153-156,共4页
过渡金属硫化物纳米晶因其特异的结构具有量子尺寸效应、小尺寸效应、表面效应等效应,显示出不同于体相材料的光电磁性质.因而成为近年来纳米科学研究的热点。几十年来,硫化亚铁(FeS)及二硫化亚铁(FeS2)因其电学、磁学性质及相... 过渡金属硫化物纳米晶因其特异的结构具有量子尺寸效应、小尺寸效应、表面效应等效应,显示出不同于体相材料的光电磁性质.因而成为近年来纳米科学研究的热点。几十年来,硫化亚铁(FeS)及二硫化亚铁(FeS2)因其电学、磁学性质及相转变特性.引起了材料科学家广泛的关注。MnS是一种ⅦB-ⅥA族的弱磁性半导体材料.在制备太阳能电池的窗口/缓冲材料、短波光电器件方面有着潜在的应用。纳米尺度的PbS能带从近红外蓝移到可见光区域.呈现出奇异的光学性质和电学性质, 展开更多
关键词 -固还原法 硫酸盐 金属硫化物
在线阅读 下载PDF
含NOx烟气的净化技术 被引量:7
5
作者 梁基照 《广州环境科学》 2000年第4期5-8,共4页
综述了常用烟气除硝的技术及其原理,对近年来的进展作了简要的评述。
关键词 污染 氮氧化物 除硝 净化 气相还原法
在线阅读 下载PDF
磁性氧化铁纳米粒子制备技术的最新进展 被引量:5
6
作者 曹建新 张煜 聂登攀 《现代机械》 2003年第4期80-82,30,共4页
介绍了颗粒磁记录介质的发展现状 ,着重总结 ,分析了磁性氧化铁纳米粒子制备技术最新进展 ,包括了溶胶—凝胶法、共沉淀法、微乳法 ,超临界流体干燥法等最新合成方法。这些方法是合成粒径小于 10
关键词 磁性氧化铁 纳米粒子 制备技术 微乳液法 溶胶-凝胶法 气相还原法 水热法 沉淀法 激光加热法
在线阅读 下载PDF
超细铁粉的制备及应用 被引量:14
7
作者 彭梅 《重型机械科技》 2003年第3期50-54,共5页
详细介绍了目前主要的几种超细铁粉的制备方法及其影响因素 。
关键词 超细铁粉 制备 气相还原法 还原法 微乳液法 羰基法 真空蒸发法 溅射法
在线阅读 下载PDF
具有空心结构Fe/SiO_2催化剂的制备及其性能研究
8
作者 王德玄 杜芳林 《青岛科技大学学报(自然科学版)》 CAS 2016年第5期523-527,共5页
以草酸亚铁为铁源,二氧化硅为模板,在水热条件下利用牺牲模板法制备出了Fe_(24)Si_4O_(43)(OH)_2,在650℃下利用气相还原法制备出了具有空心结构的Fe/SiO_2催化剂。利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、... 以草酸亚铁为铁源,二氧化硅为模板,在水热条件下利用牺牲模板法制备出了Fe_(24)Si_4O_(43)(OH)_2,在650℃下利用气相还原法制备出了具有空心结构的Fe/SiO_2催化剂。利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、物理吸附仪(BET)等测试手段对所得产物进行了表征和分析。以Fe/SiO_2为催化剂,研究反应时间、温度、压力等因素对硝基苯液相加氢性能的影响,确定了硝基苯液相加氢制备苯胺适宜反应条件:反应温度为100℃,反应压强为3MPa。在该条件下硝基苯的转化率达82%,苯胺的选择性为80%。 展开更多
关键词 牺牲模板法 空心结构 气相还原法 硝基苯加氢
在线阅读 下载PDF
Study on oil–source correlation by analyzing organic geochemistry characteristics: a case study of the Upper Triassic Yanchang Formation in the south of Ordos Basin, China 被引量:5
9
作者 Delu Li Rongxi Li +6 位作者 Baoping Wang Zhi Liu Xiaoli Wu Futian Liu Bangsheng Zhao Jinghua Cheng Wenbin Kang 《Acta Geochimica》 EI CAS CSCD 2016年第4期408-420,共13页
In the south of the Ordos Basin, the oil source of the Upper Triassic Yanchang Formation is confused all the time, which affects further exploration. In this study, oil sources from the oil layers of Ch6, Ch8 and Ch9 ... In the south of the Ordos Basin, the oil source of the Upper Triassic Yanchang Formation is confused all the time, which affects further exploration. In this study, oil sources from the oil layers of Ch6, Ch8 and Ch9 are all analyzed and confirmed. Through their carbon isotope value and biomarkers, characteristics of crude oils from the Yanchang Formation are analyzed. Then, the oil–source relation is discussed, with the source rocks' features.Finally, the oil–source relation is calculated through cluster analysis. It is believed that the oils from the Yanchang Formation deposit in a similar redox environment, with weak oxidation–weak reduction, and have all entered maturity stage. Ch9 crude oil is more mature than crude oils from Ch6 and Ch8, and has more advanced plants and fewer algae. Gas chromatography(GC) and gas chromatography–mass spectrometry(GC–MS) analysis show that crude oils from Ch6 and Ch8 may come from Ch7, and Ch9 crude oil may not. Cluster analysis displays that crude oils from Ch6 and Ch8 have closer squared Euclidean distance with Ch7 source rocks than Ch9 crude oil does,indicating crude oils from Ch6 and Ch8 stem from Ch7 source rocks. And Ch9 crude oil has rather close squared Euclidean distance with Ch9 source rocks, illustrating Ch9 crude oil may be from Ch9 source rocks. This research may provide the theoretical basis for the next exploration deploy in the south of Ordos Basin. 展开更多
关键词 Carbon isotope correlation - Cluster analysis Basin Introduction Biomarker Oil-source Yanchang Formation - Ordos
在线阅读 下载PDF
Thermodynamic behaviors of SiCl_2 in silicon deposition by gas phase zinc reduction of silicon tetrachloride
10
作者 侯彦青 聂陟枫 +3 位作者 谢刚 李荣兴 俞小花 Plant A Ramachandran 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2015年第3期552-558,共7页
The modified Siemens process,which is the major process of producing polycrystalline silicon through current technologies,is a high temperature,slow,semi-batch process and the product is expensive primarily due to the... The modified Siemens process,which is the major process of producing polycrystalline silicon through current technologies,is a high temperature,slow,semi-batch process and the product is expensive primarily due to the large energy consumption.Therefore,the zinc reduction process,which can produce solar-grade silicon in a cost effective manner,should be redeveloped for these conditions.The SiCl2 generation ratio,which stands for the degree of the side reactions,can be decomposed to SiCl4 and ZnCl2 in gas phase zinc atmosphere in the exit where the temperature is very low.Therefore,the lower SiCl2 generation ratio is profitable with lower power consumption.Based on the thermodynamic data for the related pure substances,the relations of the SiCl2 generation ratio and pressure,temperature and the feed molar ratio(n(Zn)/n(SiCl4) are investigated and the graphs thereof are plotted.And the diagrams of Kpθ-T at standard atmosphere pressure have been plotted to account for the influence of temperature on the SiCl2 generation ratio.Furthermore,the diagram of Kpθ-T at different pressures have also been plotted to give an interpretation of the influence of pressure on the SiCl2 generation ratio.The results show that SiCl2 generation ratio increases with increasing temperature,and the higher pressure and excess gas phase zinc can restrict SiCl2 generation ratio.Finally,suitable operational conditions in the practical process of polycrystalline silicon manufacture by gas phase zinc reduction of SiCl4 have been established with 1200 K,0.2 MPa and the feed molar ratio(n(Zn) /n(SiCl4)) of 4 at the entrance.Under these conditions,SiCl2 generation ratio is very low,which indicates that the side reactions can be restricted and the energy consumption is reasonable. 展开更多
关键词 Polycrystalline silicon Thermodynamics Gas phase zinc reduction process SiCl2 generation ratio
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部