The non-isothermal oxidation behavior and oxide scale microstructure of Ti-Cr alloy （0≤w（Cr）≤25%） were studied from room temperature to 1723 K by thermogravimetric analysis （TGA）, X-ray diffraction （XRD） and...The non-isothermal oxidation behavior and oxide scale microstructure of Ti-Cr alloy （0≤w（Cr）≤25%） were studied from room temperature to 1723 K by thermogravimetric analysis （TGA）, X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The influencing mechanism of chromium on the oxidation resistance of Ti-Cr alloys was discussed. The results show that the oxidation resistance of the alloys decreases with Cr below a critical chromium content wC and increases above wC; above 1000 K, the oxidation kinetics obeys parabolic rule and titanium dominates the oxidation process; after oxidation, the oxygen-diffusing layer is present in the alloy matrix, the oxide scale is mainly composed of rutile whose internal layer is rich in chromium, and chromium oxides separated out from TiO2 near the alloy-oxide interface improve the oxidation resistance. Ignition of metals and alloys is a fast non-isothermal oxidation process and the oxidation mechanism of Ti-Cr alloys during ignition is predicted.展开更多
Carbon/carbon composites modified by NiAl alloy were prepared using vacuum reactive melt infiltration methods with NiAl and titanium mixed powders as raw materials. The microstructures were investigated by scanning el...Carbon/carbon composites modified by NiAl alloy were prepared using vacuum reactive melt infiltration methods with NiAl and titanium mixed powders as raw materials. The microstructures were investigated by scanning electron microscopy. The fracture behavior, infiltration and oxidation mechanism were further discussed. The results indicated that NiAl alloy exhibited good wettability on the C/C preform because a TiC reaction layer formed at the interface. Multi-layer（PyC/TiC/NiAl＋TiC） coating evenly and compactly distributed on the surface of the carbon fiber in tubular form. The penetration depth of molten NiAl alloys depended on the reaction between the PyC and titanium. The impact fracture was inclined to along the interface between the NiAl permeability layer and C/C matrix. Al_2TiO_5 and TiO_2 formed on the surface, while the interior multi-layer tubular structure partially remained after oxidation at 1773 K for 30 min.展开更多
Plasma electrolytic oxidation (PEO) ceramic coatings were fabricated in a silicate-based electrolyte with the addition of potassium fluorozirconate (K2ZrF6) on 6063 aluminum alloy, and the effects of current density o...Plasma electrolytic oxidation (PEO) ceramic coatings were fabricated in a silicate-based electrolyte with the addition of potassium fluorozirconate (K2ZrF6) on 6063 aluminum alloy, and the effects of current density on microstructure and properties of the PEO coatings were studied. It was found that pore density of the coatings decreased with increasing the current density. The tribological and hardness tests suggested that the ceramic coating produced under the current density of 15 A/dm2showed the best mechanical property, which matched well with the phase analysis. Electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization curves proved that the coating obtained under 15 A/dm2 displayed the best anti-corrosion property, which was directly connected with morphologies of coatings.展开更多
The saturation behavior of stress current is studied.The three types of precursor sites for trap generation are also introduced by fitting method based on first order rate equation.A further investigation by statistic...The saturation behavior of stress current is studied.The three types of precursor sites for trap generation are also introduced by fitting method based on first order rate equation.A further investigation by statistics experiments shows that there are definite relationships among time constant of trap generation,the time to breakdown,and stress voltage.It also means that the time constant of trap generation can be used to predict oxide lifetime.This method is faster for TDDB study compared with usual breakdown experiments.展开更多
The hierarchical BiOClxBr1–x was synthesized by a simple solvothermal method. The samples were characterized by X-ray diffraction （XRD）, field emission scanning electron microscopy （FESEM）, UV-visible diffuse ref...The hierarchical BiOClxBr1–x was synthesized by a simple solvothermal method. The samples were characterized by X-ray diffraction （XRD）, field emission scanning electron microscopy （FESEM）, UV-visible diffuse reflectance spectroscopy （UV-vis DRS） and Brunauer-Emmett-Teller adsorption method. Compared to pure BiOCl or BiOBr, the BiOClxBr1–x solid solution has enhanced photocatalytic degradation activity for rhodamine B. This phenomenon can be explained to the hierarchical structure, lager specific surface area and appropriate energy gap of the obtained BiOClxBr1–x solid solution. The renewability and stability of photocatalyst were determinated and a possible mechanism of photocatalytic degradation was also proposed.展开更多
A new improved technique,based on the direct current current voltage and charge pumping methods,is proposed for measurements of interface traps density in the channel and the drain region for LDD n MOSFET.This tech...A new improved technique,based on the direct current current voltage and charge pumping methods,is proposed for measurements of interface traps density in the channel and the drain region for LDD n MOSFET.This technique can be applied to virgin samples and those subjected to hot carrier stress,and the latter are known to cause the interface damage in the drain region and the channel region.The generation of interface traps density in the channel region and in the drain region can be clearly distinguished by using this technique.展开更多
The formation of metastable alumina phases due to the oxidation of commercial FeCralloy（R） rods （0.5 mm thickness） at various temperatures and time periods has been examined. This structured layer acts as an ancho...The formation of metastable alumina phases due to the oxidation of commercial FeCralloy（R） rods （0.5 mm thickness） at various temperatures and time periods has been examined. This structured layer acts as an anchor to bind additional coatings of alumina via wash-coat techniques, thereby improving the layer thickness and increasing adhesion of the catalytic surface. Optimisation of the layer thickness and catalytic properties were conducted, using a range of analytical systems [scanning electron microscope （SEM）, energy dispersive X-ray （EDX） and X-ray diffraction （XRD）]. The modified FeCralloy（R） rods were tested in a fixed bed reactor rig to assess the impact on yield for the dehydrogenation of methylcyclohexane.展开更多
基金supported by the National Natural Science Foundation of China (No.51901018)the Young Elite Scientists Sponsorship Program by China Association for Science and Technology (Nos.YESS,2019QNRC001)+2 种基金the Fundamental Research Funds for the Central Universities,China (Nos.FRF-AT-20-07,06500119)the Natural Science Foundation of Beijing Municipality,China (No.2212037)the National Science and Technology Resources Investigation Program of China (No.2019FY101400).
文摘The non-isothermal oxidation behavior and oxide scale microstructure of Ti-Cr alloy （0≤w（Cr）≤25%） were studied from room temperature to 1723 K by thermogravimetric analysis （TGA）, X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The influencing mechanism of chromium on the oxidation resistance of Ti-Cr alloys was discussed. The results show that the oxidation resistance of the alloys decreases with Cr below a critical chromium content wC and increases above wC; above 1000 K, the oxidation kinetics obeys parabolic rule and titanium dominates the oxidation process; after oxidation, the oxygen-diffusing layer is present in the alloy matrix, the oxide scale is mainly composed of rutile whose internal layer is rich in chromium, and chromium oxides separated out from TiO2 near the alloy-oxide interface improve the oxidation resistance. Ignition of metals and alloys is a fast non-isothermal oxidation process and the oxidation mechanism of Ti-Cr alloys during ignition is predicted.
基金Project(2011CB605804) supported by the National Basic Research Development Program of ChinaProject(2015JJ3167) supported by the Natural Science Foundation of Hunan Province,ChinaProject(2013M531810) supported by the Postdoctoral Science Foundation of China
文摘Carbon/carbon composites modified by NiAl alloy were prepared using vacuum reactive melt infiltration methods with NiAl and titanium mixed powders as raw materials. The microstructures were investigated by scanning electron microscopy. The fracture behavior, infiltration and oxidation mechanism were further discussed. The results indicated that NiAl alloy exhibited good wettability on the C/C preform because a TiC reaction layer formed at the interface. Multi-layer（PyC/TiC/NiAl＋TiC） coating evenly and compactly distributed on the surface of the carbon fiber in tubular form. The penetration depth of molten NiAl alloys depended on the reaction between the PyC and titanium. The impact fracture was inclined to along the interface between the NiAl permeability layer and C/C matrix. Al_2TiO_5 and TiO_2 formed on the surface, while the interior multi-layer tubular structure partially remained after oxidation at 1773 K for 30 min.
基金Project(51371039)supported by the National Natural Science Foundation of China
文摘Plasma electrolytic oxidation (PEO) ceramic coatings were fabricated in a silicate-based electrolyte with the addition of potassium fluorozirconate (K2ZrF6) on 6063 aluminum alloy, and the effects of current density on microstructure and properties of the PEO coatings were studied. It was found that pore density of the coatings decreased with increasing the current density. The tribological and hardness tests suggested that the ceramic coating produced under the current density of 15 A/dm2showed the best mechanical property, which matched well with the phase analysis. Electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization curves proved that the coating obtained under 15 A/dm2 displayed the best anti-corrosion property, which was directly connected with morphologies of coatings.
文摘The saturation behavior of stress current is studied.The three types of precursor sites for trap generation are also introduced by fitting method based on first order rate equation.A further investigation by statistics experiments shows that there are definite relationships among time constant of trap generation,the time to breakdown,and stress voltage.It also means that the time constant of trap generation can be used to predict oxide lifetime.This method is faster for TDDB study compared with usual breakdown experiments.
基金Project(2016TP1007)supported by the Hunan Provincial Science and Technology Plan Project,China
文摘The hierarchical BiOClxBr1–x was synthesized by a simple solvothermal method. The samples were characterized by X-ray diffraction （XRD）, field emission scanning electron microscopy （FESEM）, UV-visible diffuse reflectance spectroscopy （UV-vis DRS） and Brunauer-Emmett-Teller adsorption method. Compared to pure BiOCl or BiOBr, the BiOClxBr1–x solid solution has enhanced photocatalytic degradation activity for rhodamine B. This phenomenon can be explained to the hierarchical structure, lager specific surface area and appropriate energy gap of the obtained BiOClxBr1–x solid solution. The renewability and stability of photocatalyst were determinated and a possible mechanism of photocatalytic degradation was also proposed.
文摘A new improved technique,based on the direct current current voltage and charge pumping methods,is proposed for measurements of interface traps density in the channel and the drain region for LDD n MOSFET.This technique can be applied to virgin samples and those subjected to hot carrier stress,and the latter are known to cause the interface damage in the drain region and the channel region.The generation of interface traps density in the channel region and in the drain region can be clearly distinguished by using this technique.
文摘The formation of metastable alumina phases due to the oxidation of commercial FeCralloy（R） rods （0.5 mm thickness） at various temperatures and time periods has been examined. This structured layer acts as an anchor to bind additional coatings of alumina via wash-coat techniques, thereby improving the layer thickness and increasing adhesion of the catalytic surface. Optimisation of the layer thickness and catalytic properties were conducted, using a range of analytical systems [scanning electron microscope （SEM）, energy dispersive X-ray （EDX） and X-ray diffraction （XRD）]. The modified FeCralloy（R） rods were tested in a fixed bed reactor rig to assess the impact on yield for the dehydrogenation of methylcyclohexane.
