There exist different response characteristics in the resistivity measurements of dual laterolog （DLL） and logging while drilling （LWD） electromagnetic wave propagation logging in highly deviated and horizontal we...There exist different response characteristics in the resistivity measurements of dual laterolog （DLL） and logging while drilling （LWD） electromagnetic wave propagation logging in highly deviated and horizontal wells due to the difference in their measuring principles. In this study, we first use the integral equation method simulated the response characteristics of LWD resistivity and use the three dimensional finite element method （3D-FEM） simulated the response characteristics of DLL resistivity in horizontal wells, and then analyzed the response differences between the DLL and LWD resistivity. The comparative analysis indicated that the response differences may be caused by different factors such as differences in the angle of instrument inclination, anisotropy, formation interface, and mud intrusion. In the interface, the curves of the LWD resistivity become sharp with increases in the deviation while those of the DLL resistivity gradually become smooth. Both curves are affected by the anisotropy although the effect on DLL resistivity is lower than the LWD resistivity. These differences aid in providing a reasonable explanation in the horizontal well. However, this can also simultaneously lead to false results. At the end of the study, we explain the effects of the differences in the interpretation of the horizontal well based on the results and actual data analysis.展开更多
In this work, Green-Naghdi （GN） equations with general weight functions were derived in a simple way. A wave-absorbing beach was also considered in the general GN equations. A numerical solution for a level higher t...In this work, Green-Naghdi （GN） equations with general weight functions were derived in a simple way. A wave-absorbing beach was also considered in the general GN equations. A numerical solution for a level higher than 4 was not feasible in the past with the original GN equations. The GN equations for shallow water waves were simplified here, which make the application of high level （higher than 4） equations feasible. The linear dispersion relationships of the first seven levels were presented. The accuracy of dispersion relationships increased as the level increased. Level 7 GN equations are capable of simulating waves out to wave number times depth kd 〈 26. Numerical simulation of nonlinear water waves was performed by use of Level 5 and 7 GN equations, which will be presented in the next paper.展开更多
The reflection and transmission of the level step to the water waves in the linear and continuous layer liquid were studied in this paper. Based on the matching method of the eigenfunction and a Boussinesq approximati...The reflection and transmission of the level step to the water waves in the linear and continuous layer liquid were studied in this paper. Based on the matching method of the eigenfunction and a Boussinesq approximation, the analytical expression of the diffraction was obtained and the computing methods of the reflection and transmission en- ergy of the level step were proposed. For the incident wave with a frequency greater than that of the flotage, there is only one mode of plane traveling wave in the flow field. In the range of this greater frequency, the linear and continuous delamination effect will affect the reflection and transmission energy of the floating rectangular box. When the fre- quency of the incident wave is less than the flotage frequency, the energy of the plane traveling wave with infinite modes in the flow field will change into the energy of different modes for each incident wave of different modes.展开更多
The exothermic efficiency of microwave heating an electrolyte/water solution is remarkably high due to the dielectric heating by orientation polarization of water and resistance heating by the Joule process occurred s...The exothermic efficiency of microwave heating an electrolyte/water solution is remarkably high due to the dielectric heating by orientation polarization of water and resistance heating by the Joule process occurred simultaneously compared with pure water.A three-dimensional finite element numerical model of multi-feed microwave heating industrial liquids continuously flowing in a meter-scale circular tube is presented.The temperature field inside the applicator tube in the cavity is solved by COMSOL Multiphysics and professional programming to describe the momentum,energy and Maxwell's equations.The evaluations of the electromagnetic field,the temperature distribution and the velocity field are simulated for the fluids dynamically heated by singleand multi-feed microwave system,respectively.Both the pilot experimental investigations and numerical results of microwave with single-feed heating for fluids with different effective permittivity and flow rates show that the presented numerical modeling makes it possible to analyze dynamic process of multi-feed microwave heating the industrial liquid.The study aids in enhancing the understanding and optimizing of dynamic process in the use of multi-feed microwave heating industrial continuous flow for a variety of material properties and technical parameters.展开更多
A numerical approach was performed to predict the propagation and transformation of nonlinear water waves. A numerical wave flume was developed based on the non-periodic high-order spectral (HOS) method. The flume was...A numerical approach was performed to predict the propagation and transformation of nonlinear water waves. A numerical wave flume was developed based on the non-periodic high-order spectral (HOS) method. The flume was applied to analyze the effect of wave steepness and wavelength on the propagation of nonlinear waves. The results show that for waves of low steepness, the wave profile and the wave energy spectrum are stable, and that the propagation can be predicted by the linear wave theory. For waves of moderate steepness and steep waves, the effects associated with the interactions between waves in a wave group become significant and a train of initially sinusoidal waves may drastically change its form within a short distance from its original position.展开更多
The inflow angle of tropical cyclones （TC） is generally neglected in numerical studies of ocean surface waves induced by TC. In this study, the impacts of TC inflow angle on ocean surface waves were investigated usi...The inflow angle of tropical cyclones （TC） is generally neglected in numerical studies of ocean surface waves induced by TC. In this study, the impacts of TC inflow angle on ocean surface waves were investigated using a high-resolution wave model. Six numerical experiments were conducted to examine, in detail, thc effects of inflow angle on mean wave parameters and the spectrum of wave directions. A comparison of the waves simulated in these experiments shows that inflow angle significantly modifies TC-induced ocean surface waves. As the inflow angle increases, the asymmetric axis of the significant wave height （SWH） field shifts 30° clockwise, and the maximum SWH moves from the front-right to the rear-right quadrant. Inflow angle also affects other mean wave parameters, especially in the rear-left quadrant, such as the mean wave direction, the mean wavelength, and the peak direction. Inflow angle is a key factor in wave models for the reproduction of double-peak or multi-peak patterns in the spectrum of wave directions. Sensitivity experiments also show that the simulation with a 40° inflow angle is the closest to that of the NOAA statistical SLOSH inflow angle. This suggests that 40° can be used as the inflow angle in future TC-induced ocean surface wave simulations when SLOSH or observed inflow angles are not available.展开更多
Turbulent control and drag reduction in a channel flow via a bidirectional traveling wave induced by spanwise oscillating Lorentz force have been investigated in the paper.The results based on the direct numerical sim...Turbulent control and drag reduction in a channel flow via a bidirectional traveling wave induced by spanwise oscillating Lorentz force have been investigated in the paper.The results based on the direct numerical simulation(DNS)indicate that the bidirectional wavy Lorentz force with appropriate control parameters can result in a regular decline of near-wall streaks and vortex structures with respect to the flow direction,leading to the effective suppression of turbulence generation and significant reduction in skin-friction drag.In addition,experiments are carried out in a water tunnel via electro-magnetic(EM)actuators designed to produce the bidirectional traveling wave excitation as described in calculations.As a result,the actual substantial drag reduction is realized successfully in these experiments.展开更多
Numerical simulations of the flow in the draft tube of a Francis turbine are carried out in order to elucidate the effects of tangential velocity on flow stability.Influence of the location of the maximum tangential v...Numerical simulations of the flow in the draft tube of a Francis turbine are carried out in order to elucidate the effects of tangential velocity on flow stability.Influence of the location of the maximum tangential velocity is explored considering the equality of the total energy at the inlet of the draft tube.It is found that the amplitude of the pressure fluctuation decreases when the location of the maximum of the tangential velocity moves from the centre to the wall on the cross section.Thus,the stability of the flow in the draft tube increases with the moving of the location of the maximum tangential velocity.However,the relative hydraulic loss increases and the recovery coefficient of the draft tube decreases slightly.展开更多
基金supported by the National Science and Technology Major Project of China(Nos.2016ZX05014-002-001,2016ZX05002-005-001,and 2017ZX05005-005-005)
文摘There exist different response characteristics in the resistivity measurements of dual laterolog （DLL） and logging while drilling （LWD） electromagnetic wave propagation logging in highly deviated and horizontal wells due to the difference in their measuring principles. In this study, we first use the integral equation method simulated the response characteristics of LWD resistivity and use the three dimensional finite element method （3D-FEM） simulated the response characteristics of DLL resistivity in horizontal wells, and then analyzed the response differences between the DLL and LWD resistivity. The comparative analysis indicated that the response differences may be caused by different factors such as differences in the angle of instrument inclination, anisotropy, formation interface, and mud intrusion. In the interface, the curves of the LWD resistivity become sharp with increases in the deviation while those of the DLL resistivity gradually become smooth. Both curves are affected by the anisotropy although the effect on DLL resistivity is lower than the LWD resistivity. These differences aid in providing a reasonable explanation in the horizontal well. However, this can also simultaneously lead to false results. At the end of the study, we explain the effects of the differences in the interpretation of the horizontal well based on the results and actual data analysis.
基金Supported by the Special Fund for Basic Scientific Research of Central Colleges Harbin Engineering University(Harbin)the National Natural Science Foundation of China+1 种基金Doctor Subject Foundation of the Ministry of Education of Chinathe"111"project(B07019)
文摘In this work, Green-Naghdi （GN） equations with general weight functions were derived in a simple way. A wave-absorbing beach was also considered in the general GN equations. A numerical solution for a level higher than 4 was not feasible in the past with the original GN equations. The GN equations for shallow water waves were simplified here, which make the application of high level （higher than 4） equations feasible. The linear dispersion relationships of the first seven levels were presented. The accuracy of dispersion relationships increased as the level increased. Level 7 GN equations are capable of simulating waves out to wave number times depth kd 〈 26. Numerical simulation of nonlinear water waves was performed by use of Level 5 and 7 GN equations, which will be presented in the next paper.
文摘The reflection and transmission of the level step to the water waves in the linear and continuous layer liquid were studied in this paper. Based on the matching method of the eigenfunction and a Boussinesq approximation, the analytical expression of the diffraction was obtained and the computing methods of the reflection and transmission en- ergy of the level step were proposed. For the incident wave with a frequency greater than that of the flotage, there is only one mode of plane traveling wave in the flow field. In the range of this greater frequency, the linear and continuous delamination effect will affect the reflection and transmission energy of the floating rectangular box. When the fre- quency of the incident wave is less than the flotage frequency, the energy of the plane traveling wave with infinite modes in the flow field will change into the energy of different modes for each incident wave of different modes.
基金Project(KKSY201503006)supported by Scientific Research Foundation of Kunming University of Science and Technology,ChinaProject(2014FD009)supported by the Applied Basic Research Foundation(Youth Program)of ChinaProject(51090385)supported by the National Natural Science Foundation of China
文摘The exothermic efficiency of microwave heating an electrolyte/water solution is remarkably high due to the dielectric heating by orientation polarization of water and resistance heating by the Joule process occurred simultaneously compared with pure water.A three-dimensional finite element numerical model of multi-feed microwave heating industrial liquids continuously flowing in a meter-scale circular tube is presented.The temperature field inside the applicator tube in the cavity is solved by COMSOL Multiphysics and professional programming to describe the momentum,energy and Maxwell's equations.The evaluations of the electromagnetic field,the temperature distribution and the velocity field are simulated for the fluids dynamically heated by singleand multi-feed microwave system,respectively.Both the pilot experimental investigations and numerical results of microwave with single-feed heating for fluids with different effective permittivity and flow rates show that the presented numerical modeling makes it possible to analyze dynamic process of multi-feed microwave heating the industrial liquid.The study aids in enhancing the understanding and optimizing of dynamic process in the use of multi-feed microwave heating industrial continuous flow for a variety of material properties and technical parameters.
文摘A numerical approach was performed to predict the propagation and transformation of nonlinear water waves. A numerical wave flume was developed based on the non-periodic high-order spectral (HOS) method. The flume was applied to analyze the effect of wave steepness and wavelength on the propagation of nonlinear waves. The results show that for waves of low steepness, the wave profile and the wave energy spectrum are stable, and that the propagation can be predicted by the linear wave theory. For waves of moderate steepness and steep waves, the effects associated with the interactions between waves in a wave group become significant and a train of initially sinusoidal waves may drastically change its form within a short distance from its original position.
基金Supported by the National Natural Science Foundation of China(No. 40706008)the Open Research Program of the Chinese Academy Sciences Key Laboratory of Tropical Marine Environmental Dynamics (No. LED0606)+1 种基金the Shandong Province Natural Science Foundation (No. Z2008E02)the National High Technology Research and Development Program of China (863 Program) (No.2008AA09A402)
文摘The inflow angle of tropical cyclones （TC） is generally neglected in numerical studies of ocean surface waves induced by TC. In this study, the impacts of TC inflow angle on ocean surface waves were investigated using a high-resolution wave model. Six numerical experiments were conducted to examine, in detail, thc effects of inflow angle on mean wave parameters and the spectrum of wave directions. A comparison of the waves simulated in these experiments shows that inflow angle significantly modifies TC-induced ocean surface waves. As the inflow angle increases, the asymmetric axis of the significant wave height （SWH） field shifts 30° clockwise, and the maximum SWH moves from the front-right to the rear-right quadrant. Inflow angle also affects other mean wave parameters, especially in the rear-left quadrant, such as the mean wave direction, the mean wavelength, and the peak direction. Inflow angle is a key factor in wave models for the reproduction of double-peak or multi-peak patterns in the spectrum of wave directions. Sensitivity experiments also show that the simulation with a 40° inflow angle is the closest to that of the NOAA statistical SLOSH inflow angle. This suggests that 40° can be used as the inflow angle in future TC-induced ocean surface wave simulations when SLOSH or observed inflow angles are not available.
基金supported by the National Natural Science Foundation of China(Grant Nos.11172140 and 11202102)the Specialized Research Fund for Doctoral Program of Higher Education(Grant No.20123219120050)the EU FP6 Framework Program AVERT and the Faculty of Engineering,University of Nottingham
文摘Turbulent control and drag reduction in a channel flow via a bidirectional traveling wave induced by spanwise oscillating Lorentz force have been investigated in the paper.The results based on the direct numerical simulation(DNS)indicate that the bidirectional wavy Lorentz force with appropriate control parameters can result in a regular decline of near-wall streaks and vortex structures with respect to the flow direction,leading to the effective suppression of turbulence generation and significant reduction in skin-friction drag.In addition,experiments are carried out in a water tunnel via electro-magnetic(EM)actuators designed to produce the bidirectional traveling wave excitation as described in calculations.As a result,the actual substantial drag reduction is realized successfully in these experiments.
基金supported by the open fund of State Key Laboratory of Hydroscience and Engineer of Tsinghua University(No.sklhse-2013-E-02)the Special Major Project of Science and Technology of Zhejiang province(No.2013C 01139)
文摘Numerical simulations of the flow in the draft tube of a Francis turbine are carried out in order to elucidate the effects of tangential velocity on flow stability.Influence of the location of the maximum tangential velocity is explored considering the equality of the total energy at the inlet of the draft tube.It is found that the amplitude of the pressure fluctuation decreases when the location of the maximum of the tangential velocity moves from the centre to the wall on the cross section.Thus,the stability of the flow in the draft tube increases with the moving of the location of the maximum tangential velocity.However,the relative hydraulic loss increases and the recovery coefficient of the draft tube decreases slightly.
