Based on the characteristic of deep rock layers and the theory of key strata,we analysed elastic mechanical characteristics of key strata by using elastic plate theory.The results show that the deformation and distrib...Based on the characteristic of deep rock layers and the theory of key strata,we analysed elastic mechanical characteristics of key strata by using elastic plate theory.The results show that the deformation and distribution of internal forces of key strata vary with different mine boundary conditions.The boundary values of key strata with three point boundaries and one fixed boundary is greater than that with four fixed boundaries.Considering the rheology of key strata under low stress conditions,we selected a generalized Kelvin model to analyse the rheology characteristics of the key strata and discovered their instantaneous elastic phases.The rate of deformation decreased over time to the point where the key strata reached stability.But over this time,the effect on deformation became very clear. For high stress conditions,we chose a Burgers model and found deformation of key strata in the form of attenuation and steady-state creep and although the rate of deformation remained constant,secondary creep was obvious,causing instability in the system.As well,we analysed the effect of creep buckling and derived a relation between buckling force and time.展开更多
A new finite element model for single-layered strand was investigated for accurate and efficient mechanical behavior analysis.Mathematical model was created by sectional path-nodes sweeping and dynamic node-beam mappi...A new finite element model for single-layered strand was investigated for accurate and efficient mechanical behavior analysis.Mathematical model was created by sectional path-nodes sweeping and dynamic node-beam mapping.Geometric relations between nodes in center core wire and helical wires were deduced in tension and bending incorporating material elasticity theory and deformation geometrical compatibility.Based on Timoshenko beam theory,strand of a pitch length was modeled with specific material,geometric parameters and synthesized constraint equations defined in ANSYS software,and predetermined load cases were performed.The obtained results show that discrepancies between suggested method and Costello theory do not exceed 1.51% in tension and 6.21% in bending,which verifies the correctness and accuracy of the suggested finite element model in predicting mechanical behavior of single-layered wire strand.展开更多
A new finite element modeling method has been developed using laminate theory in a virtual work principle for active constraining layer damping plate. The frequency dependent modulus of viscoelastic material is descri...A new finite element modeling method has been developed using laminate theory in a virtual work principle for active constraining layer damping plate. The frequency dependent modulus of viscoelastic material is described by introducing a few dissipation coordinates, known as GHM (Golla-Hughes-McTavish) method, a standard linear system with constant coefficient. The effectiveness of this method is validated by experimental model. Compared with conventional methods, this method can reduce a number of degrees of freedom and improve accuracy, provides a good model for analogous configurations.展开更多
Cyber security lacks comprehensive theoretical guidance. General security theory, as a set of basic security theory concepts, is intended to guide cyber security and all the other security work. The general theory of ...Cyber security lacks comprehensive theoretical guidance. General security theory, as a set of basic security theory concepts, is intended to guide cyber security and all the other security work. The general theory of security aims to unify the main branches of cyber security and establish a unified basic theory. This paper proposal an overview on the general theory of security, which is devoted to constructing a comprehensive model of network security. The hierarchical structure of the meridian-collateral tree is described. Shannon information theory is employed to build a cyberspace security model. Some central concepts of security, i.e., the attack and defense, are discussed and several general theorems on security are presented.展开更多
Uncertainties in some key parameters in land surface models severely restrict the improvement of model capacity for successful simulation of surface-atmosphere interaction. These key parameters are related to soil moi...Uncertainties in some key parameters in land surface models severely restrict the improvement of model capacity for successful simulation of surface-atmosphere interaction. These key parameters are related to soil moisture and heat transfer and phy- sical processes in the vegetation canopy as well as other important aerodynamic processes. In the present study, measurements of surface-atmosphere interaction at two observation stations that are located in the typical semi-arid region of China, Tongyu Station in Jilin Province and Yuzhong Station in Gansu Province, are combined with the planetary boundary layer theory to estimate the value of two key aerodynamic parameters, i.e., surface roughness length zorn and excess resistance κB-1. Multiple parameterization schemes have been used in the study to obtain values for surface roughness length and excess resistance κB-1 at the two stations. Results indicate that Zorn has distinct seasonal and inter-annual variability. For the type of surface with low-height vegetation, there is a large difference between the default value of Zorn in the land surface model and that obtained from this study, κB-1 demonstrates a significant diurnal variation and seasonal variability. Using the modified scheme for the estimation of Zom and κB-1 in the land surface model, it is found that simulations of sensible heat flux over the semi-arid region have been greatly improved. These results suggest that it is necessary to further evaluate the default values of various parameters used in land surface models based on field measurements. The approach to combine field measurements with atmospheric boundary layer theory to retrieve realistic values for key parameters in land surface models presents a great potential in the improvement of modeling studies of surface-atmosphere interaction.展开更多
First of all, the definition of integrated industry is given from the perspective of complex systems; secondly, the factors of integrated industry are identified by the application of the hierarchical structure model ...First of all, the definition of integrated industry is given from the perspective of complex systems; secondly, the factors of integrated industry are identified by the application of the hierarchical structure model of the complex systems theory; thirdly, the characteristics of integrated industry are analyzed; finally, the problems which should be paid attention to in the process of integrated industry enumerated.展开更多
基金supported by the National Natural Science Foundation of China(No.50904065)the Program for New Century Excellent Talents in University(No.NCET-09-0728)
文摘Based on the characteristic of deep rock layers and the theory of key strata,we analysed elastic mechanical characteristics of key strata by using elastic plate theory.The results show that the deformation and distribution of internal forces of key strata vary with different mine boundary conditions.The boundary values of key strata with three point boundaries and one fixed boundary is greater than that with four fixed boundaries.Considering the rheology of key strata under low stress conditions,we selected a generalized Kelvin model to analyse the rheology characteristics of the key strata and discovered their instantaneous elastic phases.The rate of deformation decreased over time to the point where the key strata reached stability.But over this time,the effect on deformation became very clear. For high stress conditions,we chose a Burgers model and found deformation of key strata in the form of attenuation and steady-state creep and although the rate of deformation remained constant,secondary creep was obvious,causing instability in the system.As well,we analysed the effect of creep buckling and derived a relation between buckling force and time.
基金Project(2009J007)supported by Science and Technology Department of Railway Ministry of ChinaProject(U1134203)supported by Joint Fund of High-speed Railway Fundamental Research,China
文摘A new finite element model for single-layered strand was investigated for accurate and efficient mechanical behavior analysis.Mathematical model was created by sectional path-nodes sweeping and dynamic node-beam mapping.Geometric relations between nodes in center core wire and helical wires were deduced in tension and bending incorporating material elasticity theory and deformation geometrical compatibility.Based on Timoshenko beam theory,strand of a pitch length was modeled with specific material,geometric parameters and synthesized constraint equations defined in ANSYS software,and predetermined load cases were performed.The obtained results show that discrepancies between suggested method and Costello theory do not exceed 1.51% in tension and 6.21% in bending,which verifies the correctness and accuracy of the suggested finite element model in predicting mechanical behavior of single-layered wire strand.
文摘A new finite element modeling method has been developed using laminate theory in a virtual work principle for active constraining layer damping plate. The frequency dependent modulus of viscoelastic material is described by introducing a few dissipation coordinates, known as GHM (Golla-Hughes-McTavish) method, a standard linear system with constant coefficient. The effectiveness of this method is validated by experimental model. Compared with conventional methods, this method can reduce a number of degrees of freedom and improve accuracy, provides a good model for analogous configurations.
基金supported by the National Key R&D Program of China (2016YFF0204001)the National Key Technology Support Program (2015BAH08F02)+3 种基金the CCF-Venustech Hongyan Research Initiative (2016-009)the PAPD fundthe CICAEET fundthe Guizhou Provincial Key Laboratory of Public Big Data Program
文摘Cyber security lacks comprehensive theoretical guidance. General security theory, as a set of basic security theory concepts, is intended to guide cyber security and all the other security work. The general theory of security aims to unify the main branches of cyber security and establish a unified basic theory. This paper proposal an overview on the general theory of security, which is devoted to constructing a comprehensive model of network security. The hierarchical structure of the meridian-collateral tree is described. Shannon information theory is employed to build a cyberspace security model. Some central concepts of security, i.e., the attack and defense, are discussed and several general theorems on security are presented.
基金supported by the National Basic Research Program of China(Grant No.2011CB952002)the National Natural Science Foundation of China(Grant Nos.41475063+1 种基金41005047)Program for New Century Excellent Talents in University,and the Jiangsu Collaborative Innovation Center for Climate Change
文摘Uncertainties in some key parameters in land surface models severely restrict the improvement of model capacity for successful simulation of surface-atmosphere interaction. These key parameters are related to soil moisture and heat transfer and phy- sical processes in the vegetation canopy as well as other important aerodynamic processes. In the present study, measurements of surface-atmosphere interaction at two observation stations that are located in the typical semi-arid region of China, Tongyu Station in Jilin Province and Yuzhong Station in Gansu Province, are combined with the planetary boundary layer theory to estimate the value of two key aerodynamic parameters, i.e., surface roughness length zorn and excess resistance κB-1. Multiple parameterization schemes have been used in the study to obtain values for surface roughness length and excess resistance κB-1 at the two stations. Results indicate that Zorn has distinct seasonal and inter-annual variability. For the type of surface with low-height vegetation, there is a large difference between the default value of Zorn in the land surface model and that obtained from this study, κB-1 demonstrates a significant diurnal variation and seasonal variability. Using the modified scheme for the estimation of Zom and κB-1 in the land surface model, it is found that simulations of sensible heat flux over the semi-arid region have been greatly improved. These results suggest that it is necessary to further evaluate the default values of various parameters used in land surface models based on field measurements. The approach to combine field measurements with atmospheric boundary layer theory to retrieve realistic values for key parameters in land surface models presents a great potential in the improvement of modeling studies of surface-atmosphere interaction.
基金This project is supported by National Natural Science Foundation of China（70773016）
文摘First of all, the definition of integrated industry is given from the perspective of complex systems; secondly, the factors of integrated industry are identified by the application of the hierarchical structure model of the complex systems theory; thirdly, the characteristics of integrated industry are analyzed; finally, the problems which should be paid attention to in the process of integrated industry enumerated.
