To obtain the refined electrodeposited nickel layer on AZ91D magnesium alloy,ultrasonic technology was applied in the processes of pre-treatment and electrodeposition.The phases of pre-treatment layer and the nickel c...To obtain the refined electrodeposited nickel layer on AZ91D magnesium alloy,ultrasonic technology was applied in the processes of pre-treatment and electrodeposition.The phases of pre-treatment layer and the nickel coating were analyzed by X-ray diffractometry(XRD)and X-ray photoelectron spectroscopy(XPS),and the microstructure was observed by scanning electron microscopy(SEM).Then,the effects of ultrasonic dispersion on the microstructure of pre-treatment layer and the grain refinement of electrodeposited nickel layer were discussed.The results showed that the pre-treatment electrodeposited Cu-Sn layer with compact microstructure could be synthesized in alkaline copper-tin liquid with ultrasonic agitation,as a result,smooth and refined nickel coating formed on AZ91D magnesium alloy.On the other hand,preferred orientation in the coating decreased because of the refined grains.展开更多
In order to promote the tolerance and controllability of the multi-degree-of-freedom(M-DOF) ultrasonic motor, a novel two-degree-of-freedom(2-DOF) spherical ultrasonic motor using three traveling-wave type annular sta...In order to promote the tolerance and controllability of the multi-degree-of-freedom(M-DOF) ultrasonic motor, a novel two-degree-of-freedom(2-DOF) spherical ultrasonic motor using three traveling-wave type annular stators was put forward. Firstly,the structure and working principle of this motor were introduced, especially a spiral spring as the preload applied component was designed for adaptive adjustment. Then, the friction drive model of 2-DOF spherical motor was built up from spatial geometric relation between three annular stators and the spherical rotor which was used to analyze the mechanical characteristics of the motor.The optimal control strategy for minimum norm solution of three stators' angular velocity was proposed, using Moore-Penrose generalized inverse matrix. Finally, a 2-DOF prototype was fabricated and tested, which ran stably and controllably. The maximum no-load velocity and stall torque are 92 r/min and 90 m N·m, respectively. The 2-DOF spherical ultrasonic motor has compact structure, easy assembly, good performance and stable operation.展开更多
The modulational instability of ion-acoustic wave in a collisionless, unmagnetized plasma consisting of warm ions, hot isothermal electrons, and relativistic electron beam is studied. A modified nonlinear Schr?dinger ...The modulational instability of ion-acoustic wave in a collisionless, unmagnetized plasma consisting of warm ions, hot isothermal electrons, and relativistic electron beam is studied. A modified nonlinear Schr?dinger equation including one additional term that comes from the effect of relativistic electron beam is derived. It is found that the inclusion of a relativistic electron beam would modify the modulational instability of the wave packet and could not admit any stationary soliton waves.展开更多
The driving voltage and current signals of piezoceramic transducer (PZT) were measured directly by designing circuits from ultrasonic generator and using a data acquisition software system. The input impedance and pow...The driving voltage and current signals of piezoceramic transducer (PZT) were measured directly by designing circuits from ultrasonic generator and using a data acquisition software system. The input impedance and power of PZT were investigated by using root mean square (RMS) calculation. The vibration driven by high frequency was tested by laser Doppler vibrometer (PSV-400-M2). And the thermosonic bonding features were observed by scanning electron microscope (JSM-6360LV). The results show that the input power of bonding is lower than that of no load. The input impedance of bonding is greater than that of no load. Nonlinear phase, plastic flow and expansion period, and strengthening bonding process are shown in the impedance and power curves. The ultrasonic power is in direct proportion to the vibration displacement driven by the power, and greater displacements driven by high power (>5 W) result in welding failure phenomena, such as crack, break, and peeling off in wedge bonding. For thermosonic flip chip bonding, the high power decreases position precision of bonding or results in slippage and rotation phenomena of bumps. To improve reliability and precision of thermosonic bonding, the low ultrasonic power (about 1-5 W) should be chosen.展开更多
In this paper, （2＋1）-dimensional electron acoustic waves （EAW） in an unmagnetized collisionless plasma have been studied by the linearized method and the reductive perturbation technique, respectively. The disper...In this paper, （2＋1）-dimensional electron acoustic waves （EAW） in an unmagnetized collisionless plasma have been studied by the linearized method and the reductive perturbation technique, respectively. The dispersion relation and a modified Kadomtsev-Petviashvili （KP） equation have been obtained for the EAW in the plasma considering a cold electron fluid and a vortex-like hot electrons. It is found from some numerical results that the parameter β（the ratio of the free hot electron temperature to the hot trapped electron temperature） effects on the amplitude and the Width of the electron acoustic solitary waves （EASW）. It can be indicated that the free hot electron temperature and the hot trapped electron temperature have very important effect on the characters of the propagation for the EASW.展开更多
When a surface acoustic wave （SAW） propagates on the surface of a GaAs semiconductor, coupling between electrons in the two-dimensional electron gas beneath the interface and the elastic host crystal through piezoel...When a surface acoustic wave （SAW） propagates on the surface of a GaAs semiconductor, coupling between electrons in the two-dimensional electron gas beneath the interface and the elastic host crystal through piezoelectric interaction will attenuate the SAW. The coupling coemcient is ~alculated for the SAW propagating along an arbitrary direction. It is found that the coupling strength is strongly dependent on the propagating direction. When the SAW propagates along the [011] direction, the coupling becomes quite weak.展开更多
he effects of porous hydroxyapatite blocks（PHABs） and an adjunct low-intensity pulsed ultrasound stimulation（LIPUS） on the fusion rate in a rabbit spinal posterolateral fusion（PLF） model were evaluated.Twenty ra...he effects of porous hydroxyapatite blocks（PHABs） and an adjunct low-intensity pulsed ultrasound stimulation（LIPUS） on the fusion rate in a rabbit spinal posterolateral fusion（PLF） model were evaluated.Twenty rabbits underwent PLF with autograft and PHABs were randomly assigned to two groups：treated group with 20 min LIPUS daily and untreated control group for 4 weeks until euthanasia.The fused motion segments were subjected to manual palpation,gross observation,and radiographic investigation before histomorphologic and scanning electron microscopic analyses.Statistical differences between the LIPUS group and the control group are found in the fusion rate,bone density gray scale,trabecular bone formation,osteoblast-like cells,chondrocytes and positive expression of BMP-2 and TGF-β1 in the junction zone（significance level p〈0.05）.The results suggest that LIPUS can increase fusion rates and accelerate bone in-growth into PHAB.Hence,PHAB and LIPUS may be used together to increase fusion rates in a rabbit spinal fusion model with a promising extension to human application.展开更多
By using the quantum magnetohydrodynamic model, the electrostatic waves in weakly magnetized quantum plasmas are investigated. The electrons are treated as a quantum and magnetized species, while the ions are classica...By using the quantum magnetohydrodynamic model, the electrostatic waves in weakly magnetized quantum plasmas are investigated. The electrons are treated as a quantum and magnetized species, while the ions are classical unmagnetized ones. The general dispersion relations are derived. It is shown that, both the high frequency electron waves （Langmuire wave and upper-hybrid wave） and the low frequency ion acoustic wave can propagate when the plasmas are cold.展开更多
文摘To obtain the refined electrodeposited nickel layer on AZ91D magnesium alloy,ultrasonic technology was applied in the processes of pre-treatment and electrodeposition.The phases of pre-treatment layer and the nickel coating were analyzed by X-ray diffractometry(XRD)and X-ray photoelectron spectroscopy(XPS),and the microstructure was observed by scanning electron microscopy(SEM).Then,the effects of ultrasonic dispersion on the microstructure of pre-treatment layer and the grain refinement of electrodeposited nickel layer were discussed.The results showed that the pre-treatment electrodeposited Cu-Sn layer with compact microstructure could be synthesized in alkaline copper-tin liquid with ultrasonic agitation,as a result,smooth and refined nickel coating formed on AZ91D magnesium alloy.On the other hand,preferred orientation in the coating decreased because of the refined grains.
基金Project(51107111)supported by the National Natural Science Foundation of China
文摘In order to promote the tolerance and controllability of the multi-degree-of-freedom(M-DOF) ultrasonic motor, a novel two-degree-of-freedom(2-DOF) spherical ultrasonic motor using three traveling-wave type annular stators was put forward. Firstly,the structure and working principle of this motor were introduced, especially a spiral spring as the preload applied component was designed for adaptive adjustment. Then, the friction drive model of 2-DOF spherical motor was built up from spatial geometric relation between three annular stators and the spherical rotor which was used to analyze the mechanical characteristics of the motor.The optimal control strategy for minimum norm solution of three stators' angular velocity was proposed, using Moore-Penrose generalized inverse matrix. Finally, a 2-DOF prototype was fabricated and tested, which ran stably and controllably. The maximum no-load velocity and stall torque are 92 r/min and 90 m N·m, respectively. The 2-DOF spherical ultrasonic motor has compact structure, easy assembly, good performance and stable operation.
文摘The modulational instability of ion-acoustic wave in a collisionless, unmagnetized plasma consisting of warm ions, hot isothermal electrons, and relativistic electron beam is studied. A modified nonlinear Schr?dinger equation including one additional term that comes from the effect of relativistic electron beam is derived. It is found that the inclusion of a relativistic electron beam would modify the modulational instability of the wave packet and could not admit any stationary soliton waves.
基金Project(50675227) supported by the National Natural Science Foundation of ChinaProject(07JJ3091) supported by Natural Science Foundation of Hunan Province, China+1 种基金Project(2007001) supported by the State Key Laboratory of Digital Manufacturing Equipment and TechnologyProject(2009CB724203) supported by the Major State Basic Research Development Program of China
文摘The driving voltage and current signals of piezoceramic transducer (PZT) were measured directly by designing circuits from ultrasonic generator and using a data acquisition software system. The input impedance and power of PZT were investigated by using root mean square (RMS) calculation. The vibration driven by high frequency was tested by laser Doppler vibrometer (PSV-400-M2). And the thermosonic bonding features were observed by scanning electron microscope (JSM-6360LV). The results show that the input power of bonding is lower than that of no load. The input impedance of bonding is greater than that of no load. Nonlinear phase, plastic flow and expansion period, and strengthening bonding process are shown in the impedance and power curves. The ultrasonic power is in direct proportion to the vibration displacement driven by the power, and greater displacements driven by high power (>5 W) result in welding failure phenomena, such as crack, break, and peeling off in wedge bonding. For thermosonic flip chip bonding, the high power decreases position precision of bonding or results in slippage and rotation phenomena of bumps. To improve reliability and precision of thermosonic bonding, the low ultrasonic power (about 1-5 W) should be chosen.
基金The project supported by National Natural Science Foundation of China under Grant No. 10575082
文摘In this paper, （2＋1）-dimensional electron acoustic waves （EAW） in an unmagnetized collisionless plasma have been studied by the linearized method and the reductive perturbation technique, respectively. The dispersion relation and a modified Kadomtsev-Petviashvili （KP） equation have been obtained for the EAW in the plasma considering a cold electron fluid and a vortex-like hot electrons. It is found from some numerical results that the parameter β（the ratio of the free hot electron temperature to the hot trapped electron temperature） effects on the amplitude and the Width of the electron acoustic solitary waves （EASW）. It can be indicated that the free hot electron temperature and the hot trapped electron temperature have very important effect on the characters of the propagation for the EASW.
基金the National Natural Science Foundation of China under
文摘When a surface acoustic wave （SAW） propagates on the surface of a GaAs semiconductor, coupling between electrons in the two-dimensional electron gas beneath the interface and the elastic host crystal through piezoelectric interaction will attenuate the SAW. The coupling coemcient is ~alculated for the SAW propagating along an arbitrary direction. It is found that the coupling strength is strongly dependent on the propagating direction. When the SAW propagates along the [011] direction, the coupling becomes quite weak.
文摘he effects of porous hydroxyapatite blocks（PHABs） and an adjunct low-intensity pulsed ultrasound stimulation（LIPUS） on the fusion rate in a rabbit spinal posterolateral fusion（PLF） model were evaluated.Twenty rabbits underwent PLF with autograft and PHABs were randomly assigned to two groups：treated group with 20 min LIPUS daily and untreated control group for 4 weeks until euthanasia.The fused motion segments were subjected to manual palpation,gross observation,and radiographic investigation before histomorphologic and scanning electron microscopic analyses.Statistical differences between the LIPUS group and the control group are found in the fusion rate,bone density gray scale,trabecular bone formation,osteoblast-like cells,chondrocytes and positive expression of BMP-2 and TGF-β1 in the junction zone（significance level p〈0.05）.The results suggest that LIPUS can increase fusion rates and accelerate bone in-growth into PHAB.Hence,PHAB and LIPUS may be used together to increase fusion rates in a rabbit spinal fusion model with a promising extension to human application.
基金Supported by the National Natural Science Foundation of China under Grant Nos. 10905015 and 10747122the Foundation of Anhui Educational Committee under Grant No. 2009SQRZ010
文摘By using the quantum magnetohydrodynamic model, the electrostatic waves in weakly magnetized quantum plasmas are investigated. The electrons are treated as a quantum and magnetized species, while the ions are classical unmagnetized ones. The general dispersion relations are derived. It is shown that, both the high frequency electron waves （Langmuire wave and upper-hybrid wave） and the low frequency ion acoustic wave can propagate when the plasmas are cold.
