期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
离散式智能SPS可编程控制器的驱动方式
1
作者 Jrg Wunder 《现代制造》 2003年第7期56-59,共4页
为了经济的实现局部生产过程的自动化,必须使用离散式控制技术。而且要求驱动装置在传递运动的同时更加智能化,使其能够通过可编程控制器自行解决问题,从而减轻上级主控计算机的工作负担。
关键词 离散智能SPS可编程控制 驱动方 离散式控制 电动机
在线阅读 下载PDF
风电机组叶片的无人机除冰控制系统设计与优化
2
作者 王一博 韩巧丽 +2 位作者 刘海洋 杨敏 吴成龙 《太阳能学报》 EI CAS CSCD 北大核心 2024年第7期641-647,共7页
针对内蒙古等北方高寒地区风电机组叶片覆冰问题,提出风电机组叶片的无人机除冰喷射控制系统。基于STM32F103基础,设计无人机除冰控制系统,从除冰剂喷射控制、传感器采集数据实时监测、遥控操作及装置安全控制等功能需求出发,制定系统... 针对内蒙古等北方高寒地区风电机组叶片覆冰问题,提出风电机组叶片的无人机除冰喷射控制系统。基于STM32F103基础,设计无人机除冰控制系统,从除冰剂喷射控制、传感器采集数据实时监测、遥控操作及装置安全控制等功能需求出发,制定系统方案并完成除冰控制系统总体设计,针对试验中流量控制存在的问题对除冰控制系统的PWM驱动控制部分进行软硬件优化,采用离散式PID控制算法,负反馈闭环控制系统提高流量精度和除冰效率。完成除冰控制装置整合及系统调试,搭建实验平台,选择八旋翼无人机载具并进行参数设置及飞行测试,最终完成整个除冰无人机设备整合,实现精准局部除冰。 展开更多
关键词 风电机组叶片 无人机 除冰控制系统 STM32F103 脉宽调制 离散PID控制算法
在线阅读 下载PDF
升降船低合金高强钢铰链座焊接成形控制方法
3
作者 熊咏梅 胥胜洪 +1 位作者 马要坡 谢颖涵 《焊接技术》 2023年第10期127-130,共4页
外界环境干扰会影响升降船低合金高强钢铰链座焊接成形控制效果,为提升焊接成形控制精度,文中提出升降船低合金高强钢铰链座成形控制方法。通过采集低合金高强钢铰链座焊接电信号,计算焊接成形相关参数;构建离散式PID控制器,将采集的电... 外界环境干扰会影响升降船低合金高强钢铰链座焊接成形控制效果,为提升焊接成形控制精度,文中提出升降船低合金高强钢铰链座成形控制方法。通过采集低合金高强钢铰链座焊接电信号,计算焊接成形相关参数;构建离散式PID控制器,将采集的电信号数据及铰链座焊接相关参数输入到控制器内,实现铰链座焊接成形控制。试验结果表明,该方法焊件的平均抗拉强度较高、同轴度及垂直度控制偏差较小,验证了该方法的有效性、可行性。 展开更多
关键词 升降船低合金高强钢 铰链座 焊接成形控制 离散PID控制
在线阅读 下载PDF
Stabilization of discrete nonholonomic chained system
4
作者 李胜 马国梁 胡维礼 《Journal of Southeast University(English Edition)》 EI CAS 2005年第4期445-448,共4页
Aimed at the stabilization of the nonholonomic chained system under fixed sample control, two control laws were proposed. The discrete model of the nonholonomic chained system under zero-hold was obtained through the ... Aimed at the stabilization of the nonholonomic chained system under fixed sample control, two control laws were proposed. The discrete model of the nonholonomic chained system under zero-hold was obtained through the integrate method to the continuous model. And the discrete model was transformed to the form with two linear subsystems through coordinate transformation. Two feedback control laws, time-invariant control law and time-varying control law, were proposed; and the local stabilization and global stabilization were realized respectively. The simulation results show the effectiveness of the proposed control laws. The discrete nonholonomic chained system can converge to zero from any initial state exponentially, and the convergence rate can be changed through changing the parameters of the control laws. 展开更多
关键词 nonholonomic chained system discrete control exponential stabilization
在线阅读 下载PDF
Modelling and Predictive Control of a Buck-Boost DC-DC Converter
5
作者 Gianluca Gatto Ignazio Marongiu +2 位作者 Aldo Perfetto Alessandro Serpi Ivan Luigi Spano 《Journal of Energy and Power Engineering》 2012年第8期1276-1283,共8页
A predictive current control algorithm for the Buck-Boost DC-DC converter is presented in this paper. The continuous time model of the system is properly introduced, then, by imposing a proper PWM modulation pattern, ... A predictive current control algorithm for the Buck-Boost DC-DC converter is presented in this paper. The continuous time model of the system is properly introduced, then, by imposing a proper PWM modulation pattern, its discrete time model is achieved. This last one is successfully employed in determining the steady state locus of the Buck-Boost converter, both in CCM (continuous conduction mode) and DCM (discontinuous conduction mode). A novel continuous time equivalent circuit of the converter is introduced too, with the aim of determining a ripple free representation of the state variables of the system, over both transient and steady state operation. Then, a predictive current control algorithm, suitable in both CCM and DCM, is developed and properly checked by means of computer simulations. The corresponding results have highlighted the effectiveness of the proposed modelling and of the predictive control algorithm, both in CCM and DCM. 展开更多
关键词 Equivalent circuits DC-DC power conversion predictive control.
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部