由于BIM(Building Information Modeling,建筑信息模型)与造价专业清单算量模型还存在一定的差异,现阶段造价人员在有BIM模型的情况下仍然需要重新翻模进行算量,效率低下。基于全字匹配、拆分匹配、常规匹配和默认匹配4种映射匹配方法...由于BIM(Building Information Modeling,建筑信息模型)与造价专业清单算量模型还存在一定的差异,现阶段造价人员在有BIM模型的情况下仍然需要重新翻模进行算量,效率低下。基于全字匹配、拆分匹配、常规匹配和默认匹配4种映射匹配方法建立模型映射库,对BIM模型转换造价三维算量模型的方法进行研究,将设计创建的BIM模型按照造价模型算量规则做转换,再在程序中嵌入造价的规则和扣减关系进行清单算量。直接利用BIM模型提高效率的同时也推动BIM技术在造价专业的应用。展开更多
Due to the diversified demands of quality of service（QoS） in volume multimedia application, QoS routings for multiservice are becoming a research hotspot in low earth orbit（LEO） satellite networks. A novel QoS sat...Due to the diversified demands of quality of service（QoS） in volume multimedia application, QoS routings for multiservice are becoming a research hotspot in low earth orbit（LEO） satellite networks. A novel QoS satellite routing algorithm for multi-class traffic is proposed. The goal of the routing algorithm is to provide the distinct QoS for different traffic classes and improve the utilization of network resources. Traffic is classified into three classes and allocated priorities based on their QoS requirements, respectively. A priority queuing mechanism guarantees the algorithm to work better for high-priority classes. In order to control the congestion, a blocking probability analysis model is built up based on the Markov process theory. Finally, according to the classification link-cost metrics, routings for different classes are calculated with the distinct QoS requirments and the status of network resource. Simulations verify the performance of the routing algorithm at different time and in different regions, and results demonstrate that the algorithm has great advantages in terms of the average delay and the blocking probability. Meanwhile, the robustness issue is also discussed.展开更多
With the development of precision agriculture, the research that applies Remote Sensing technology, especially hyperspectral remote sensing, to realize crop management, monitoring and yield estimation, has been concer...With the development of precision agriculture, the research that applies Remote Sensing technology, especially hyperspectral remote sensing, to realize crop management, monitoring and yield estimation, has been concerned. Nowadays, the growth-monitoring and yield-estimating methods in rice, wheat and other annual crops develop rapidly with some achievements having already been put into service. But the yield estimation research on perennial economic crops is few. Taking peren- nial citrus trees as the research object, using ASD spectrometer to collect citrus canopy spectral, this article studied and analyzed the citrus of veget＆tion index and its relationship on yield, synthetically considered the influence of the agriculture pa- rameters on crop yield, and finally constructed the citrus yield estimation model based on the spectral data and agronomic parameters. Through the Significance Test and Samples＇ Test, olutained that the model＇s fitting degree was R=0.631, F= 13.201, P〈0.01 and the error rate of estimating accuracy was controlled in the range 3%-16%, proving that the model has statistical signification and reliability. It concluded that hyperspectral acquired from citrus canopy has substantial potential for citrus yield estimation. This study is an application and exploration of Hyperspectral Remote Sensing technology in the citrus yield estimation.展开更多
Sentiment analysis of online reviews and other user generated content is an important research problem for its wide range of applications.In this paper,we propose a feature-based vector model and a novel weighting alg...Sentiment analysis of online reviews and other user generated content is an important research problem for its wide range of applications.In this paper,we propose a feature-based vector model and a novel weighting algorithm for sentiment analysis of Chinese product reviews.Specifically,an opinionated document is modeled by a set of feature-based vectors and corresponding weights.Different from previous work,our model considers modifying relationships between words and contains rich sentiment strength descriptions which are represented by adverbs of degree and punctuations.Dependency parsing is applied to construct the feature vectors.A novel feature weighting algorithm is proposed for supervised sentiment classification based on rich sentiment strength related information.The experimental results demonstrate the effectiveness of the proposed method compared with a state of the art method using term level weighting algorithms.展开更多
According to the chaotic and non-linear characters of power load data,the time series matrix is established with the theory of phase-space reconstruction,and then Lyapunov exponents with chaotic time series are comput...According to the chaotic and non-linear characters of power load data,the time series matrix is established with the theory of phase-space reconstruction,and then Lyapunov exponents with chaotic time series are computed to determine the time delay and the embedding dimension.Due to different features of the data,data mining algorithm is conducted to classify the data into different groups.Redundant information is eliminated by the advantage of data mining technology,and the historical loads that have highly similar features with the forecasting day are searched by the system.As a result,the training data can be decreased and the computing speed can also be improved when constructing support vector machine(SVM) model.Then,SVM algorithm is used to predict power load with parameters that get in pretreatment.In order to prove the effectiveness of the new model,the calculation with data mining SVM algorithm is compared with that of single SVM and back propagation network.It can be seen that the new DSVM algorithm effectively improves the forecast accuracy by 0.75%,1.10% and 1.73% compared with SVM for two random dimensions of 11-dimension,14-dimension and BP network,respectively.This indicates that the DSVM gains perfect improvement effect in the short-term power load forecasting.展开更多
Since remote sensing can provide information on the actual status of an agricultural crop, the integration between remote sensing data and crop growth simulation models has become an important trend for yield estimati...Since remote sensing can provide information on the actual status of an agricultural crop, the integration between remote sensing data and crop growth simulation models has become an important trend for yield estimation and prediction.The main objective of this research was to combine a rice growth simulation model with remote sensing data to estimate rice grain yield for different growing seasons leading to an assessment of rice yield at regional levels. Integration between NOAA (National Oceanic and Atmospheric Administration) AVHRR (Advanced Very High Resolution Radiometer) data and the rice growth simulation model ORYZA1 to develop a new software, which was named as Rice-SRS Model, resulted in accurate estimates for rice yield in Shaoxing, China, with an estimation error reduced to 1.03% and 0.79% over-estimation and 0.79% under-estimation for early, single and late season rice, respectively. Selecting suitable dates for remote sensing images was an important factor which could influence estimation accuracy. Thus, given the different growing periods for each rice season, four images were needed for early and late rice, while five images were preferable for single season rice.Estimating rice yield using two or three images was possible, however, if images were obtained during the panicle initiation and heading stages.展开更多
By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture t...By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture theory, KiniⅠC,KunⅠC, as well as the critical effective crack length and the critical crack tip opening displacement, were evaluated. Based on the double-K fracture parameters above, the calculation model of equivalent strength for induced crack was established, thus the calculation method on its initiation, stable propagation and unstable fracture was ascertained. Moreover, the finite element simulation analysis of stress field in ShaPai arch dam and the on-site observational splaying points of induced crack at different altitudes validated the reliability of the model. Finally, crack inducer′s optimal setting in RCC arch dam was studied. It improves the design level of induced crack in RCC arch dam and satisfies the necessity of engineering practice.展开更多
Shor proposed a polynomial time algorithm for computing the order of one element in a multiplicative group using a quantum computer. Based on Miller’s randomization, he then gave a factorization algorithm. But the al...Shor proposed a polynomial time algorithm for computing the order of one element in a multiplicative group using a quantum computer. Based on Miller’s randomization, he then gave a factorization algorithm. But the algorithm has two shortcomings, the order must be even and the output might be a trivial factor. Actually, these drawbacks can be overcome if the number is an RSA modulus. Applying the special structure of the RSA modulus, an algorithm is presented to overcome the two shortcomings. The new algorithm improves Shor’s algorithm for factoring RSA modulus. The cost of the factorization algorithm almost depends on the calculation of the order of 2 in the multiplication group.展开更多
The in-medium quark condensate is studied with an equivalent-mass approach in which one does not need to make assumptions on the derivatives of model parameters with respect to the quark current mass.It is shown that ...The in-medium quark condensate is studied with an equivalent-mass approach in which one does not need to make assumptions on the derivatives of model parameters with respect to the quark current mass.It is shown that the condensate is generally a decreasing function of both the density and temperature with the decreasing speed depending on the confinement parameter.Specially,at given density,the condensate decreases on increasing temperature.The decreasing speed is comparatively small at lower temperature,and becomes very fast at higher temperature.展开更多
文摘由于BIM(Building Information Modeling,建筑信息模型)与造价专业清单算量模型还存在一定的差异,现阶段造价人员在有BIM模型的情况下仍然需要重新翻模进行算量,效率低下。基于全字匹配、拆分匹配、常规匹配和默认匹配4种映射匹配方法建立模型映射库,对BIM模型转换造价三维算量模型的方法进行研究,将设计创建的BIM模型按照造价模型算量规则做转换,再在程序中嵌入造价的规则和扣减关系进行清单算量。直接利用BIM模型提高效率的同时也推动BIM技术在造价专业的应用。
基金Supported by the National High Technology Research and Development Program of China(″863″Program)(2010AAxxx404)~~
文摘Due to the diversified demands of quality of service（QoS） in volume multimedia application, QoS routings for multiservice are becoming a research hotspot in low earth orbit（LEO） satellite networks. A novel QoS satellite routing algorithm for multi-class traffic is proposed. The goal of the routing algorithm is to provide the distinct QoS for different traffic classes and improve the utilization of network resources. Traffic is classified into three classes and allocated priorities based on their QoS requirements, respectively. A priority queuing mechanism guarantees the algorithm to work better for high-priority classes. In order to control the congestion, a blocking probability analysis model is built up based on the Markov process theory. Finally, according to the classification link-cost metrics, routings for different classes are calculated with the distinct QoS requirments and the status of network resource. Simulations verify the performance of the routing algorithm at different time and in different regions, and results demonstrate that the algorithm has great advantages in terms of the average delay and the blocking probability. Meanwhile, the robustness issue is also discussed.
基金Supported by the central university basic scientific research fund(XDJK2009C006)from Ministry of Educationthe National Youth Science Fund(41201436)from National Science Counci~~
文摘With the development of precision agriculture, the research that applies Remote Sensing technology, especially hyperspectral remote sensing, to realize crop management, monitoring and yield estimation, has been concerned. Nowadays, the growth-monitoring and yield-estimating methods in rice, wheat and other annual crops develop rapidly with some achievements having already been put into service. But the yield estimation research on perennial economic crops is few. Taking peren- nial citrus trees as the research object, using ASD spectrometer to collect citrus canopy spectral, this article studied and analyzed the citrus of veget＆tion index and its relationship on yield, synthetically considered the influence of the agriculture pa- rameters on crop yield, and finally constructed the citrus yield estimation model based on the spectral data and agronomic parameters. Through the Significance Test and Samples＇ Test, olutained that the model＇s fitting degree was R=0.631, F= 13.201, P〈0.01 and the error rate of estimating accuracy was controlled in the range 3%-16%, proving that the model has statistical signification and reliability. It concluded that hyperspectral acquired from citrus canopy has substantial potential for citrus yield estimation. This study is an application and exploration of Hyperspectral Remote Sensing technology in the citrus yield estimation.
基金This work was supported in part by National Natural Science Foundation of China under Grants No.60970052，the Beijing Natural Science Foundation under Grants No.4133084，the Beijing Educational Committee Science and Technology Development Planned under Grants No.KM201410028017 and the Beijing Key Disciplines of Computer Application Technology
文摘Sentiment analysis of online reviews and other user generated content is an important research problem for its wide range of applications.In this paper,we propose a feature-based vector model and a novel weighting algorithm for sentiment analysis of Chinese product reviews.Specifically,an opinionated document is modeled by a set of feature-based vectors and corresponding weights.Different from previous work,our model considers modifying relationships between words and contains rich sentiment strength descriptions which are represented by adverbs of degree and punctuations.Dependency parsing is applied to construct the feature vectors.A novel feature weighting algorithm is proposed for supervised sentiment classification based on rich sentiment strength related information.The experimental results demonstrate the effectiveness of the proposed method compared with a state of the art method using term level weighting algorithms.
基金Project(70671039) supported by the National Natural Science Foundation of China
文摘According to the chaotic and non-linear characters of power load data,the time series matrix is established with the theory of phase-space reconstruction,and then Lyapunov exponents with chaotic time series are computed to determine the time delay and the embedding dimension.Due to different features of the data,data mining algorithm is conducted to classify the data into different groups.Redundant information is eliminated by the advantage of data mining technology,and the historical loads that have highly similar features with the forecasting day are searched by the system.As a result,the training data can be decreased and the computing speed can also be improved when constructing support vector machine(SVM) model.Then,SVM algorithm is used to predict power load with parameters that get in pretreatment.In order to prove the effectiveness of the new model,the calculation with data mining SVM algorithm is compared with that of single SVM and back propagation network.It can be seen that the new DSVM algorithm effectively improves the forecast accuracy by 0.75%,1.10% and 1.73% compared with SVM for two random dimensions of 11-dimension,14-dimension and BP network,respectively.This indicates that the DSVM gains perfect improvement effect in the short-term power load forecasting.
基金Project supported by the Commission of Science, Technology and Industry for National Defence, China (No.Y97# 14-6-2).
文摘Since remote sensing can provide information on the actual status of an agricultural crop, the integration between remote sensing data and crop growth simulation models has become an important trend for yield estimation and prediction.The main objective of this research was to combine a rice growth simulation model with remote sensing data to estimate rice grain yield for different growing seasons leading to an assessment of rice yield at regional levels. Integration between NOAA (National Oceanic and Atmospheric Administration) AVHRR (Advanced Very High Resolution Radiometer) data and the rice growth simulation model ORYZA1 to develop a new software, which was named as Rice-SRS Model, resulted in accurate estimates for rice yield in Shaoxing, China, with an estimation error reduced to 1.03% and 0.79% over-estimation and 0.79% under-estimation for early, single and late season rice, respectively. Selecting suitable dates for remote sensing images was an important factor which could influence estimation accuracy. Thus, given the different growing periods for each rice season, four images were needed for early and late rice, while five images were preferable for single season rice.Estimating rice yield using two or three images was possible, however, if images were obtained during the panicle initiation and heading stages.
文摘By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture theory, KiniⅠC,KunⅠC, as well as the critical effective crack length and the critical crack tip opening displacement, were evaluated. Based on the double-K fracture parameters above, the calculation model of equivalent strength for induced crack was established, thus the calculation method on its initiation, stable propagation and unstable fracture was ascertained. Moreover, the finite element simulation analysis of stress field in ShaPai arch dam and the on-site observational splaying points of induced crack at different altitudes validated the reliability of the model. Finally, crack inducer′s optimal setting in RCC arch dam was studied. It improves the design level of induced crack in RCC arch dam and satisfies the necessity of engineering practice.
文摘Shor proposed a polynomial time algorithm for computing the order of one element in a multiplicative group using a quantum computer. Based on Miller’s randomization, he then gave a factorization algorithm. But the algorithm has two shortcomings, the order must be even and the output might be a trivial factor. Actually, these drawbacks can be overcome if the number is an RSA modulus. Applying the special structure of the RSA modulus, an algorithm is presented to overcome the two shortcomings. The new algorithm improves Shor’s algorithm for factoring RSA modulus. The cost of the factorization algorithm almost depends on the calculation of the order of 2 in the multiplication group.
基金Supported by National Natural Science Foundation of China under Grant Nos.11045006 and 11135011the Key Project from Chinese Academy of Sciences(12A0A0012)the President Foundation by the Graduate University of Chinese Academy of Sciences
文摘The in-medium quark condensate is studied with an equivalent-mass approach in which one does not need to make assumptions on the derivatives of model parameters with respect to the quark current mass.It is shown that the condensate is generally a decreasing function of both the density and temperature with the decreasing speed depending on the confinement parameter.Specially,at given density,the condensate decreases on increasing temperature.The decreasing speed is comparatively small at lower temperature,and becomes very fast at higher temperature.
