过冷大水滴(supercooled large droplet, SLD)云雾环境不同于常规粒径范围的过冷水滴,具有更大的粒径范围和复杂的水滴粒径分布形式,使得结冰的冰型异常复杂,从而给飞行器的飞行安全带来了前所未有的挑战。现有结冰数值模拟方法仅能模...过冷大水滴(supercooled large droplet, SLD)云雾环境不同于常规粒径范围的过冷水滴,具有更大的粒径范围和复杂的水滴粒径分布形式,使得结冰的冰型异常复杂,从而给飞行器的飞行安全带来了前所未有的挑战。现有结冰数值模拟方法仅能模拟单一粒径的水滴,无法准确模拟真实SLD云雾环境“双峰分布”的粒径分布特性和相应的冰型。为了准确高效模拟SLD这种粒径分布特性,提出了一种基于Rosin-Rammler分布函数进行欧拉-拉格朗日混合抽样的水滴轨迹模拟算法。通过所提方法收集水滴,再利用结冰模型与水膜模型计算表面溢流传热和冰高,从而实现了准确高效的SLD粒径分布的结冰数值模拟,并通过2.5维算例研究了SLD粒径分布对机翼结冰的冰型特征以及冰型空间随机性的影响。结果表明:SLD的粒径分布对冰型有较大的影响,冰型特征和冰型随机性与中值体积直径(median volume diameter, MVD)和粒径分布方差紧密关联。展开更多
The roughness effect based on the wall function method is introduced into the numerical simulation of the rime ice accretion and the resulting effect on the aerodynamic performance of the airfoil. Incorporating the tw...The roughness effect based on the wall function method is introduced into the numerical simulation of the rime ice accretion and the resulting effect on the aerodynamic performance of the airfoil. Incorporating the two-phase model of air/super-cooled droplets in the Eulerian coordinate system, this paper presents the simulation of the rime ice accretion on the NACA 0012 airfoil. The predicted rime ice shape is compared with those results of measurements and simulations by other icing codes. Also the resulting effects of rime ice on airfoil aerodynamic performance are discussed. Results indicate that the rime ice accretion leads to the loss of the maximum lift coefficient by 26%, the decrease of the stall angle by about 3° and the considerable increase of the drag coefficient.展开更多
In the jet engine, icing phenomena occur primarily on the fan blades, the FEGVs （fan exit guide vanes）, the splitter, and the low-pressure compressor. Accreted ice disturbs the inlet flow and causes large energy los...In the jet engine, icing phenomena occur primarily on the fan blades, the FEGVs （fan exit guide vanes）, the splitter, and the low-pressure compressor. Accreted ice disturbs the inlet flow and causes large energy losses. In addition, ice accreted on a fan rotor can be shed from the blade surface due to centrifugal force and can damage compressor components. This phenomenon, which is typical in turbomachinery, is referred to as ice shedding. Although existing icing models can simulate ice growth, these models do not have the capability to reproduce ice shedding. In the present study, we develop an icing model that takes into account both ice growth and ice shedding. Furthermore, we have validated the proposed ice shedding model through the comparison of numerical results and experimental data, which include the flow rate loss due to ice growth and the flow rate recovery due to ice shedding. The simulation results for the time at which ice shedding occurred and what were obtained using the proposed ice shedding model were in good agreement with the experimental results.展开更多
Icing(or ice accretion) is a phenomenon in which super-cooled water droplets impinge and accrete on a body.It is well known that ice accretion on blades and vanes leads to performance degradation and has caused severe...Icing(or ice accretion) is a phenomenon in which super-cooled water droplets impinge and accrete on a body.It is well known that ice accretion on blades and vanes leads to performance degradation and has caused severe accidents.Although various anti-icing and deicing systems have been developed,such accidents still occur.Therefore,it is important to clarify the phenomenon of ice accretion on an aircraft and in a jet engine.However,flight tests for ice accretion are very expensive,and in the wind tunnel it is difficult to reproduce all climate conditions where ice accretion can occur.Therefore,it is expected that computational fluid dynamics(CFD),which can estimate ice accretion in various climate conditions,will be a useful way to predict and understand the ice accretion phenomenon.On the other hand,although the icing caused by super-cooled large droplets(SLD) is very dangerous,the numerical method has not been established yet.This is why SLD icing is characterized by splash and bounce phenomena of droplets and they are very complex in nature.In the present study,we develop an ice accretion code considering the splash and bounce phenomena to predict SLD icing,and the code is applied to a fan rotor blade.The numerical results with and without the SLD icing model are compared.Through this study,the influence of the SLD icing model is numerically clarified.展开更多
文摘The roughness effect based on the wall function method is introduced into the numerical simulation of the rime ice accretion and the resulting effect on the aerodynamic performance of the airfoil. Incorporating the two-phase model of air/super-cooled droplets in the Eulerian coordinate system, this paper presents the simulation of the rime ice accretion on the NACA 0012 airfoil. The predicted rime ice shape is compared with those results of measurements and simulations by other icing codes. Also the resulting effects of rime ice on airfoil aerodynamic performance are discussed. Results indicate that the rime ice accretion leads to the loss of the maximum lift coefficient by 26%, the decrease of the stall angle by about 3° and the considerable increase of the drag coefficient.
文摘In the jet engine, icing phenomena occur primarily on the fan blades, the FEGVs （fan exit guide vanes）, the splitter, and the low-pressure compressor. Accreted ice disturbs the inlet flow and causes large energy losses. In addition, ice accreted on a fan rotor can be shed from the blade surface due to centrifugal force and can damage compressor components. This phenomenon, which is typical in turbomachinery, is referred to as ice shedding. Although existing icing models can simulate ice growth, these models do not have the capability to reproduce ice shedding. In the present study, we develop an icing model that takes into account both ice growth and ice shedding. Furthermore, we have validated the proposed ice shedding model through the comparison of numerical results and experimental data, which include the flow rate loss due to ice growth and the flow rate recovery due to ice shedding. The simulation results for the time at which ice shedding occurred and what were obtained using the proposed ice shedding model were in good agreement with the experimental results.
文摘Icing(or ice accretion) is a phenomenon in which super-cooled water droplets impinge and accrete on a body.It is well known that ice accretion on blades and vanes leads to performance degradation and has caused severe accidents.Although various anti-icing and deicing systems have been developed,such accidents still occur.Therefore,it is important to clarify the phenomenon of ice accretion on an aircraft and in a jet engine.However,flight tests for ice accretion are very expensive,and in the wind tunnel it is difficult to reproduce all climate conditions where ice accretion can occur.Therefore,it is expected that computational fluid dynamics(CFD),which can estimate ice accretion in various climate conditions,will be a useful way to predict and understand the ice accretion phenomenon.On the other hand,although the icing caused by super-cooled large droplets(SLD) is very dangerous,the numerical method has not been established yet.This is why SLD icing is characterized by splash and bounce phenomena of droplets and they are very complex in nature.In the present study,we develop an ice accretion code considering the splash and bounce phenomena to predict SLD icing,and the code is applied to a fan rotor blade.The numerical results with and without the SLD icing model are compared.Through this study,the influence of the SLD icing model is numerically clarified.
