城市热岛效应是人类活动对大气系统影响的最主要体现之一。本文利用(Space and Time Multiscale Analysis System,STMAS)时空多尺度分析系统,融合了地面自动站、雷达、卫星等多源高时空分辨率观测资料,建立了城市热岛三维数据集。并在...城市热岛效应是人类活动对大气系统影响的最主要体现之一。本文利用(Space and Time Multiscale Analysis System,STMAS)时空多尺度分析系统,融合了地面自动站、雷达、卫星等多源高时空分辨率观测资料,建立了城市热岛三维数据集。并在此基础上统计了2021年北京夏季的城市热岛强度变化特征,选取其中一次超强城市热岛个例(2021年6月11—12日)详细分析了其三维精细化结构特征。结果表明:(1)本个例中,夜间郊区近地面迅速降温,形成逆温层;而城市近地面降温缓慢,使得近地面城郊温差不断增大。(2)本次超强城市热岛三维温度场暖心结构在地面和990 hPa以下低空等压面清晰可见,风场距平呈现气旋性环流特征并在低空从郊区向城区辐合,引起可到达中高空的上升运动,说明城市热岛效应有增强垂直环流的作用。展开更多
The stigmas of five species, Populus euphratica Oliv., P. alba L., P. simonii Carr., P. lasiocarpa Oliv. and P. nigra L. have been studied. Scanning electron microscopy re veals that exudates are present in the ...The stigmas of five species, Populus euphratica Oliv., P. alba L., P. simonii Carr., P. lasiocarpa Oliv. and P. nigra L. have been studied. Scanning electron microscopy re veals that exudates are present in the intercellular spaces, in the clefts between the multicel lular papillae and on the receptive surface. Release and movement of exudates can be visual ized when the fresh stigmas are stained with sudan Ⅲ and auramine O. Paraffin and semi thin resin sections of stigmas after glutaraldehyde osmium fixation evidence the lipidic nature of the exudates. Transmission electron microscopy reveals the glandular features of the stigmatic papillae cells, such as abundance of rough and smooth endoplasmic reticulum, polyribosomes, and well developed dictyosomes with secretory vesicles. Pellicle and epicuticular lamellate layers which have been considered as typical features of the dry type stigmas are also present in the species where stigmas appear extremely wet. It is concluded that stigmas in all of the five species are secretory at the receptive stage. Well developed generative and sperm cells were observed in the pollen tubes penetrating through the deep layers of the stigmatic tissue in the reciprocal crosses between P. euphratica and P. simonii, which indicated that there is no significant barrier in the stigma.展开更多
Because the difference between the acceleration curve of traditional projectile structure and the measured accelera- tion curve is large, refining projectile structure is proposed. After setting up multi-storey concre...Because the difference between the acceleration curve of traditional projectile structure and the measured accelera- tion curve is large, refining projectile structure is proposed. After setting up multi-storey concrete target board penetrated by the projectiles with different structures, the simulations with traditional projectile structure and refining projectile structure are conducted using ANSYS/LS-DYNA, and two acceleration curves are obtained, respectively. And then the target experi- ment that the projectile penetrates eight-storey concrete board is conducted and the measured acceleration curves are ob- tained. By comparing the simulation acceleration curves with the measured acceleration curves, it can be concluded that the acceleration curve with refined projectile structure is closer to the measured curve. Therefore, the simulation curve with re- fined projectile structure is of higher reference value for simulation research.展开更多
Commercial purity and high purity titanium sheets were initially strained by a new technique, named as friction roll surface processing （FRSP）. Severe strain was imposed into the surface layer and strain gradient wa...Commercial purity and high purity titanium sheets were initially strained by a new technique, named as friction roll surface processing （FRSP）. Severe strain was imposed into the surface layer and strain gradient was formed through the thickness of the sheet. The microstructure and texture in as-strained state were investigated by optical microscopy and X-ray diffraction technique On the surface of the sheets, ultra-fine grains were found to have a sharp texture with a preferred orientation strongly related to the FRSP direction. The evolution of microstructure and crystallographic texture of FRSPed samples during recrystallization were also studied by electron back-scattered diffraction （EBSD） technique after being annealed at selected temperatures and time. The results indicated that the preferred orientations resulting from FRSP and annealing in the surface layer were formed during rolling and its recrystallization textures were reduced by FRSP. In addition, the texture evolved stably without change in main components during the annealing.展开更多
The Al-9Zn-2.8Mg-2.5Cu-xZr-ySc alloys （x=0, 0.15%, 0.15%; y=0, 0.05%, 0.15%）, produced by low-frequent electromagnetic casting technology, were subjected to homogenization treatment, hot extrusion, solution and agin...The Al-9Zn-2.8Mg-2.5Cu-xZr-ySc alloys （x=0, 0.15%, 0.15%; y=0, 0.05%, 0.15%）, produced by low-frequent electromagnetic casting technology, were subjected to homogenization treatment, hot extrusion, solution and aging treatment. The effects of minor Sc and Zr addition on microstructure, recrystallization and properties of alloys were studied by optical microscopy （OM）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The results show that Sc and Zr addition can refine grains of the as-cast alloy by precipitation of primary Al3（Sc,Zr） particles formed during solidification as heterogeneous nuclei. Secondary Al3（Sc,Zr） precipitates formed during homogenization treatment strongly pin the movement of dislocation and subgrain boundaries, which can effectively inhibit the alloys recrystallization. Compared with the alloy without Sc and Zr addition, the Al-Zn-Mg-Cu-Zr alloy with 0.05%Sc and 0.15%Zr shows the increase in tensile strength and yield strength by 172 MPa and 218 MPa, respectively. Strengthening comes from the contributions of precipitation, substructure and grain refining.展开更多
Wood is the product of cambial activity in trees, and the seasonal activity style of cambium directly influences wood biomass production, structures and properties. The seasonal changes in the ultrastructure of the va...Wood is the product of cambial activity in trees, and the seasonal activity style of cambium directly influences wood biomass production, structures and properties. The seasonal changes in the ultrastructure of the vascular cambium activity of Populus tonientosa Carr. planted in Beijing area were examined in shoot tissues collected during 15 months by means of transmission electron microscopy. Before xylem mother cells reactivated completely, the dividing fusiform cells in cambium and new phloem cells had appeared at the same time. The initiation of cambial activity may be related to the bud sprouting and the young leaf growth in shoots. More details about the ultrastructural changes of cambial cells at the onset of cambial activity have been gained. When the large vacuole in active cambial cells divided into smaller ones during the dormant phase, proteinaceous material that disappeared in active cambial cells refilled many of these small vactioles. In addition, lipid droplets and starch granules had the same cycles as proteinaceous material. The plasmalemma invaginations of fusiform cells were observed not only in active phase but also in dormancy. The endomembrane system consisting of nuclear membrane, endoplasmic reticulum (ER), dictyosomes and their secretory vesicles, changed in form and distribution at different phases during a cycle and performed important roles at the onset of active cambium and during the wall formation process of secondary xylem cells. The tangential walls remained relatively thin throughout the year but the radial walls thickened markedly when the cambium was dormant. During the transition from dormancy to activity, a partial autolysis occurred in the radial walls of the cambial cells, especially at the cell wall junctions. A notable feature of the cells at the onset of cambial activity was the thinning of the radial walls.展开更多
The developmental process of oil cells in the shoot of Litsea pungens Hemsl. has been studied with transmission electron microscopy. According to the development of the three layers of cell wall, the developmental pro...The developmental process of oil cells in the shoot of Litsea pungens Hemsl. has been studied with transmission electron microscopy. According to the development of the three layers of cell wall, the developmental process could be divided into 4 stages. In stage 1, the cell wall consisted only of a primary (the outmost) cellulose layer, which might further be divided into two substages, the oil cell initial, and the vacuolizing oil cell. During this stage, there were some small electron translucent vesicles and dark osmiophilic droplets of variant sizes in the different-shaped plastids. It was observed that some dark and gray osmiophilic materials coalesced to vacuoles in the cytoplasm. In stage 2, a lamellated suberin layer accumulated inside the primary cellulose layer. In stage 3, a thicker and looser inner cellulose wall layer was formed gradually inside the suberin layer. Some dark osmiophilic droplets have been observed in this loose inner cellulose wall layer. The plasmodesmata were blocked up and became a special structure. Then, the big vacuole, which is the oil sac, was full of osmiophilic oil. In stage 4, the oil cell became matured and the cytoplasm disintegrated. The oil sac enveloped from plasmalemma was attached to the cupule, which was formed by the protuberance of the inner cellulose wall layer into the lumen. After the maturity of oil cell, the ground cytoplasm began to disintegrate and became electron opaque or exhibited in a disordered state, and the osmiophilic oil appeared light gray.展开更多
Right before the excystment of an Euplotes encysti-cus sawtooth-like folds appeared among the pellicle plas- malemma, the inner and outer alveolar membranes were still sticking together, and were not distinguishable. ...Right before the excystment of an Euplotes encysti-cus sawtooth-like folds appeared among the pellicle plas- malemma, the inner and outer alveolar membranes were still sticking together, and were not distinguishable. Mi- crotubular layers already formed at the sites beneath the dorsal cortical pellicle corresponding to vegetative cells,but they still proceed to be organized on the ventral struc-tures. Cristae, highly-tangled with tubular-type struc-tures, appeared on the mitochondria, and were morpho-logically similar to that of vegetative cells. In the cor-tical ciliatures, such as ciliary shafts, kinetosomes, sur-rounding fibrillar cirral baskets, and attached structures of ciliatures, etc., they are different from those in rest- ing cysts which are degenerated or lost. All the cilia- ture microtubules of ciliary shafts are of the 9+2 pattern,but the microtubule-like structure aggregates at triplet - microtubule centers of many kinetosmes, are still under various stages of differentiation. Microtubules beneath the kinetosomal rows are of a developmentally elongated stage; crowded chromatins of various shapes and sizes are found in macronucleus, but there are no nuclear pores (formed by nuclear membrane as in resting cysts) on the nuclear membrane where these chromatins attached.展开更多
文摘城市热岛效应是人类活动对大气系统影响的最主要体现之一。本文利用(Space and Time Multiscale Analysis System,STMAS)时空多尺度分析系统,融合了地面自动站、雷达、卫星等多源高时空分辨率观测资料,建立了城市热岛三维数据集。并在此基础上统计了2021年北京夏季的城市热岛强度变化特征,选取其中一次超强城市热岛个例(2021年6月11—12日)详细分析了其三维精细化结构特征。结果表明:(1)本个例中,夜间郊区近地面迅速降温,形成逆温层;而城市近地面降温缓慢,使得近地面城郊温差不断增大。(2)本次超强城市热岛三维温度场暖心结构在地面和990 hPa以下低空等压面清晰可见,风场距平呈现气旋性环流特征并在低空从郊区向城区辐合,引起可到达中高空的上升运动,说明城市热岛效应有增强垂直环流的作用。
基金the NationalNaturalScience Foundation ofChina (NNSFC)
文摘The stigmas of five species, Populus euphratica Oliv., P. alba L., P. simonii Carr., P. lasiocarpa Oliv. and P. nigra L. have been studied. Scanning electron microscopy re veals that exudates are present in the intercellular spaces, in the clefts between the multicel lular papillae and on the receptive surface. Release and movement of exudates can be visual ized when the fresh stigmas are stained with sudan Ⅲ and auramine O. Paraffin and semi thin resin sections of stigmas after glutaraldehyde osmium fixation evidence the lipidic nature of the exudates. Transmission electron microscopy reveals the glandular features of the stigmatic papillae cells, such as abundance of rough and smooth endoplasmic reticulum, polyribosomes, and well developed dictyosomes with secretory vesicles. Pellicle and epicuticular lamellate layers which have been considered as typical features of the dry type stigmas are also present in the species where stigmas appear extremely wet. It is concluded that stigmas in all of the five species are secretory at the receptive stage. Well developed generative and sperm cells were observed in the pollen tubes penetrating through the deep layers of the stigmatic tissue in the reciprocal crosses between P. euphratica and P. simonii, which indicated that there is no significant barrier in the stigma.
基金Science and Technology Fund for Graduate Students of North University of China(NO.20131036)
文摘Because the difference between the acceleration curve of traditional projectile structure and the measured accelera- tion curve is large, refining projectile structure is proposed. After setting up multi-storey concrete target board penetrated by the projectiles with different structures, the simulations with traditional projectile structure and refining projectile structure are conducted using ANSYS/LS-DYNA, and two acceleration curves are obtained, respectively. And then the target experi- ment that the projectile penetrates eight-storey concrete board is conducted and the measured acceleration curves are ob- tained. By comparing the simulation acceleration curves with the measured acceleration curves, it can be concluded that the acceleration curve with refined projectile structure is closer to the measured curve. Therefore, the simulation curve with re- fined projectile structure is of higher reference value for simulation research.
基金support in part by Grant-in-aid for Scientific Research from the Japan Society for Promotion of Science under Contract No. 16560605
文摘Commercial purity and high purity titanium sheets were initially strained by a new technique, named as friction roll surface processing （FRSP）. Severe strain was imposed into the surface layer and strain gradient was formed through the thickness of the sheet. The microstructure and texture in as-strained state were investigated by optical microscopy and X-ray diffraction technique On the surface of the sheets, ultra-fine grains were found to have a sharp texture with a preferred orientation strongly related to the FRSP direction. The evolution of microstructure and crystallographic texture of FRSPed samples during recrystallization were also studied by electron back-scattered diffraction （EBSD） technique after being annealed at selected temperatures and time. The results indicated that the preferred orientations resulting from FRSP and annealing in the surface layer were formed during rolling and its recrystallization textures were reduced by FRSP. In addition, the texture evolved stably without change in main components during the annealing.
基金Project(0211002605132)supported by Institute of Multipurpose Utilization of Mineral Resources,Chinese Academy of Geological Sciences,ChinaProject(0211005303101)supported by the Fundamental Research Funds for the Central Universities,China+1 种基金Project(2010BB4074)supported by Natural Science Foundation Project of CQ CSTC,ChinaProject(2010ZD-02)supported by State Key Laboratory for Advanced Metals and Materials,China
文摘The Al-9Zn-2.8Mg-2.5Cu-xZr-ySc alloys （x=0, 0.15%, 0.15%; y=0, 0.05%, 0.15%）, produced by low-frequent electromagnetic casting technology, were subjected to homogenization treatment, hot extrusion, solution and aging treatment. The effects of minor Sc and Zr addition on microstructure, recrystallization and properties of alloys were studied by optical microscopy （OM）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The results show that Sc and Zr addition can refine grains of the as-cast alloy by precipitation of primary Al3（Sc,Zr） particles formed during solidification as heterogeneous nuclei. Secondary Al3（Sc,Zr） precipitates formed during homogenization treatment strongly pin the movement of dislocation and subgrain boundaries, which can effectively inhibit the alloys recrystallization. Compared with the alloy without Sc and Zr addition, the Al-Zn-Mg-Cu-Zr alloy with 0.05%Sc and 0.15%Zr shows the increase in tensile strength and yield strength by 172 MPa and 218 MPa, respectively. Strengthening comes from the contributions of precipitation, substructure and grain refining.
文摘Wood is the product of cambial activity in trees, and the seasonal activity style of cambium directly influences wood biomass production, structures and properties. The seasonal changes in the ultrastructure of the vascular cambium activity of Populus tonientosa Carr. planted in Beijing area were examined in shoot tissues collected during 15 months by means of transmission electron microscopy. Before xylem mother cells reactivated completely, the dividing fusiform cells in cambium and new phloem cells had appeared at the same time. The initiation of cambial activity may be related to the bud sprouting and the young leaf growth in shoots. More details about the ultrastructural changes of cambial cells at the onset of cambial activity have been gained. When the large vacuole in active cambial cells divided into smaller ones during the dormant phase, proteinaceous material that disappeared in active cambial cells refilled many of these small vactioles. In addition, lipid droplets and starch granules had the same cycles as proteinaceous material. The plasmalemma invaginations of fusiform cells were observed not only in active phase but also in dormancy. The endomembrane system consisting of nuclear membrane, endoplasmic reticulum (ER), dictyosomes and their secretory vesicles, changed in form and distribution at different phases during a cycle and performed important roles at the onset of active cambium and during the wall formation process of secondary xylem cells. The tangential walls remained relatively thin throughout the year but the radial walls thickened markedly when the cambium was dormant. During the transition from dormancy to activity, a partial autolysis occurred in the radial walls of the cambial cells, especially at the cell wall junctions. A notable feature of the cells at the onset of cambial activity was the thinning of the radial walls.
文摘The developmental process of oil cells in the shoot of Litsea pungens Hemsl. has been studied with transmission electron microscopy. According to the development of the three layers of cell wall, the developmental process could be divided into 4 stages. In stage 1, the cell wall consisted only of a primary (the outmost) cellulose layer, which might further be divided into two substages, the oil cell initial, and the vacuolizing oil cell. During this stage, there were some small electron translucent vesicles and dark osmiophilic droplets of variant sizes in the different-shaped plastids. It was observed that some dark and gray osmiophilic materials coalesced to vacuoles in the cytoplasm. In stage 2, a lamellated suberin layer accumulated inside the primary cellulose layer. In stage 3, a thicker and looser inner cellulose wall layer was formed gradually inside the suberin layer. Some dark osmiophilic droplets have been observed in this loose inner cellulose wall layer. The plasmodesmata were blocked up and became a special structure. Then, the big vacuole, which is the oil sac, was full of osmiophilic oil. In stage 4, the oil cell became matured and the cytoplasm disintegrated. The oil sac enveloped from plasmalemma was attached to the cupule, which was formed by the protuberance of the inner cellulose wall layer into the lumen. After the maturity of oil cell, the ground cytoplasm began to disintegrate and became electron opaque or exhibited in a disordered state, and the osmiophilic oil appeared light gray.
文摘Right before the excystment of an Euplotes encysti-cus sawtooth-like folds appeared among the pellicle plas- malemma, the inner and outer alveolar membranes were still sticking together, and were not distinguishable. Mi- crotubular layers already formed at the sites beneath the dorsal cortical pellicle corresponding to vegetative cells,but they still proceed to be organized on the ventral struc-tures. Cristae, highly-tangled with tubular-type struc-tures, appeared on the mitochondria, and were morpho-logically similar to that of vegetative cells. In the cor-tical ciliatures, such as ciliary shafts, kinetosomes, sur-rounding fibrillar cirral baskets, and attached structures of ciliatures, etc., they are different from those in rest- ing cysts which are degenerated or lost. All the cilia- ture microtubules of ciliary shafts are of the 9+2 pattern,but the microtubule-like structure aggregates at triplet - microtubule centers of many kinetosmes, are still under various stages of differentiation. Microtubules beneath the kinetosomal rows are of a developmentally elongated stage; crowded chromatins of various shapes and sizes are found in macronucleus, but there are no nuclear pores (formed by nuclear membrane as in resting cysts) on the nuclear membrane where these chromatins attached.
