To control the superplastic flow and fracture and examine the variation in deformation energy,the stress and grain size of Mg-7.28Li-2.19Al-0.091Y alloy were obtained using tensile testing and microstructure quantific...To control the superplastic flow and fracture and examine the variation in deformation energy,the stress and grain size of Mg-7.28Li-2.19Al-0.091Y alloy were obtained using tensile testing and microstructure quantification,and new high temperature deformation energy models were established.Results show that the grain interior deformation energy increases with increasing the strain rate and decreases with increasing the temperature.The variation in the grain boundary deformation energy is opposite to that in the grain interior deformation energy.At a given temperature,critical cavity nucleation energy decreases with increasing strain rate and cavity nucleation becomes easy,whereas at a given strain rate,critical cavity nucleation energy increases with increasing temperature and cavity nucleation becomes difficult.The newly established models of the critical cavity nucleation radius and energy provide a way for predicting the initiation of microcrack and improving the service life of the forming parts.展开更多
In this paper,we present a new method of intelligent back analysis(IBA)using grey Verhulst model(GVM)to identify geotechnical parameters of rock mass surrounding tunnel,and validate it via a test for a main openings o...In this paper,we present a new method of intelligent back analysis(IBA)using grey Verhulst model(GVM)to identify geotechnical parameters of rock mass surrounding tunnel,and validate it via a test for a main openings of−600 m level in Coal Mine“6.13”,Democratic People's Republic of Korea.The displacement components used for back analysis are the crown settlement and sidewalls convergence monitored at the end of the openings excavation,and the final closures predicted by GVM.The non-linear relation between displacements and back analysis parameters was obtained by artificial neural network(ANN)and Burger-creep viscoplastic(CVISC)model of FLAC3D.Then,the optimal parameters were determined for rock mass surrounding tunnel by genetic algorithm(GA)with both groups of measured displacements at the end of the final excavation and closures predicted by GVM.The maximum absolute error(MAE)and standard deviation(Std)between calculated displacements by numerical simulation with back analysis parameters and in situ ones were less than 6 and 2 mm,respectively.Therefore,it was found that the proposed method could be successfully applied to determining design parameters and stability for tunnels and underground cavities,as well as mine openings and stopes.展开更多
In order to describe the three-stage creep behavior of compressed asphalt mastic, a visco-elastoplastic damage constitutive model is proposed in this work. The model parameters are treated as quadratic polynomial func...In order to describe the three-stage creep behavior of compressed asphalt mastic, a visco-elastoplastic damage constitutive model is proposed in this work. The model parameters are treated as quadratic polynomial functions with respect to stress and temperature. A series of uniaxial compressive creep experiments are performed at various stress and temperature conditions in order to determine these parameter functions, and then the proposed model is validated by comparison between the predictions and experiments at the other loading conditions. It is shown that very small permanent deformation at low stress and temperature increases rapidly with elevated stress or temperature and the damage may initiate in the stationary stage but mainly develops in the accelerated stage. Compared with the visco-elastoplastic models without damage, the predictions from the proposed model is in better agreement with the experiments, and can better capture the rate-dependency in creep responses of asphalt mastic especially below its softening point of 47 ℃展开更多
The long-term stability of large-span soft rock tunnel is influenced greatly by the creep effect of surrounding rock.The development of a new type of foam concrete which has the property of high compressibility and lo...The long-term stability of large-span soft rock tunnel is influenced greatly by the creep effect of surrounding rock.The development of a new type of foam concrete which has the property of high compressibility and low ductility was introduced.And it was made as filling material of reserved deformation layer between the first lining and the second lining used in large-span soft rock tunnel.The effect of the new type of foam concrete was simulated as filling material of reserved deformation layer using numerical simulation.Through the comparison with the common large-span soft rock tunnel,the vault settlement and surrounding convergence are reduced by about 61% and 45%,respectively,after creep of 100 a.And in the second lining,the plastic zone reduces apparently and the maximum equivalent plastic strain decreases relatively.So,it can be found that the application of the new type of foam concrete as the filling material of reserved deformation layer can relieve the excessive force in second lining induced by rock creep,reduce its deformation and improve the stability of tunnel.展开更多
Tensile behaviors of an AZS0 alloy were investigated by elongation-to-failure tensile tests at 300, 350, 400 and 450 ℃, and strain rates of 10-2 and 10-3 s 1. Strain-rate-change tests from 5×10-5 s-1 to 2x10-2 s...Tensile behaviors of an AZS0 alloy were investigated by elongation-to-failure tensile tests at 300, 350, 400 and 450 ℃, and strain rates of 10-2 and 10-3 s 1. Strain-rate-change tests from 5×10-5 s-1 to 2x10-2 s-1 were applied to study deformation mechanisms. The experimental data show that the material exhibits enhanced tensile ductilities of over 100% at 400 and 450 ℃ with stress exponent of 4.29 and activation energy of 149.60 kJ/mol, and initial fine grains preserve in evenly deformed gauge based on microstructure studies. The enhanced tensile ductilities are rate controlled by a competitive mechanism of grain boundary sliding and dislocation climb creep, based on which a model can successfully simulate the deformation behavior.展开更多
Based on the uniaxial compression creep experiments conducted on bauxite sandstone obtained from Sanmenxia,typical creep experiment curves were obtained.From the characteristics of strain component of creep curves,the...Based on the uniaxial compression creep experiments conducted on bauxite sandstone obtained from Sanmenxia,typical creep experiment curves were obtained.From the characteristics of strain component of creep curves,the creep strain is composed of instantaneous elastic strain,ε（me）,instantaneous plastic strain,ε（mp）,viscoelastic strain,ε（ce）,and viscoplastic strain,ε（cp）.Based on the characteristics of instantaneous plastic strain,a new element of instantaneous plastic rheology was introduced,instantaneous plastic modulus was defined,and the modified Burgers model was established.Then identification of direct screening method in this model was completed.According to the mechanical properties of rheological elements,one- and three-dimensional creep equations in different stress levels were obtained.One-dimensional model parameters were identified by the method of least squares,and in the process of computation,Gauss-Newton iteration method was applied.Finally,by fitting the experimental curves,the correctness of direct method model was verified,then the examination of posterior exclusive method of the model was accomplished.The results showed that in the improved Burgers models,the rheological characteristics of sandstone are embodied properly,microscopic analysis of creep curves is also achieved,and the correctness of comprehensive identification method of rheological model is verified.展开更多
The influences of time on clays are discussed first,and the concept of the instant normal compression line is proposed by analyzing the existing theories and experimental results.Based on the creep law,the relationshi...The influences of time on clays are discussed first,and the concept of the instant normal compression line is proposed by analyzing the existing theories and experimental results.Based on the creep law,the relationship between the aging time and the overconsolidation parameter is built.With the reloading equation of the UH model(unified hardening model for overconsolidated clays) used to calculate the instant compression deformation,a one-dimensional stress-strain-time relationship is proposed.Furthermore,the evolution of this relationship is analyzed,and the characteristic rate that is a function of the overconsolidation parameter is defined.Then a three-dimensional elastic-viscous-plastic constitutive model is suggested by incorporating equivalent time into the current yield function of the UH model.The new model can describe not only creep,rate effect and other viscous phenomena,but also shear dilatancy,strain softening and other behaviors of overconsolidated clays.Besides,compared with the modified Cam-clay model it requires only one additional parameter(the coefficient of secondary compression) to consider the creep law.Finally,because the proposed model can be changed into the UH model under instantaneous loading,the elastic-plastic and elastic-viscous-plastic frameworks are unified.展开更多
Conventional consolidation tests on reconstituted specimens of numerous natural soft clays show a decreasing of creep index Cae with increasing soil density. Based on all selected and conducted experimental results, a...Conventional consolidation tests on reconstituted specimens of numerous natural soft clays show a decreasing of creep index Cae with increasing soil density. Based on all selected and conducted experimental results, a modified creep index Cae＊ defined in double logarithmic plane lge-lgt, was plotted for various clays, from which Cae＊ can be assumed as a constant for different soil densities. Then, the modified creep index was applied to a newly developed elastic viscoplastic model. In this way, the modified creep index Ca＊ can naturally take into account the nonlinear Cae revealing the influence of soil density in the soil assemblies without additional parameters. Finally, the enhanced model was incorporated into the finite element code ABAQUS and used to simulate a consolidation test and a test embankment. The improvement of simulations by the modified creep index was highlighted by comparing simulations using the conventional creep index Cae.展开更多
基金Project(51334006)supported by the National Natural Science Foundation of China
文摘To control the superplastic flow and fracture and examine the variation in deformation energy,the stress and grain size of Mg-7.28Li-2.19Al-0.091Y alloy were obtained using tensile testing and microstructure quantification,and new high temperature deformation energy models were established.Results show that the grain interior deformation energy increases with increasing the strain rate and decreases with increasing the temperature.The variation in the grain boundary deformation energy is opposite to that in the grain interior deformation energy.At a given temperature,critical cavity nucleation energy decreases with increasing strain rate and cavity nucleation becomes easy,whereas at a given strain rate,critical cavity nucleation energy increases with increasing temperature and cavity nucleation becomes difficult.The newly established models of the critical cavity nucleation radius and energy provide a way for predicting the initiation of microcrack and improving the service life of the forming parts.
基金Project(32-41)supported by the National Science and Technical Development Foundation of DPR of Korea。
文摘In this paper,we present a new method of intelligent back analysis(IBA)using grey Verhulst model(GVM)to identify geotechnical parameters of rock mass surrounding tunnel,and validate it via a test for a main openings of−600 m level in Coal Mine“6.13”,Democratic People's Republic of Korea.The displacement components used for back analysis are the crown settlement and sidewalls convergence monitored at the end of the openings excavation,and the final closures predicted by GVM.The non-linear relation between displacements and back analysis parameters was obtained by artificial neural network(ANN)and Burger-creep viscoplastic(CVISC)model of FLAC3D.Then,the optimal parameters were determined for rock mass surrounding tunnel by genetic algorithm(GA)with both groups of measured displacements at the end of the final excavation and closures predicted by GVM.The maximum absolute error(MAE)and standard deviation(Std)between calculated displacements by numerical simulation with back analysis parameters and in situ ones were less than 6 and 2 mm,respectively.Therefore,it was found that the proposed method could be successfully applied to determining design parameters and stability for tunnels and underground cavities,as well as mine openings and stopes.
基金Project(2011CB013800)supported by the National Basic Research Program of ChinaProject(10672063)supported by the National Natural Science Foundation of ChinaProject(Y201119)supported by the Hubei Province Key Laboratory of Systems Science in Metallurgical Process,China
文摘In order to describe the three-stage creep behavior of compressed asphalt mastic, a visco-elastoplastic damage constitutive model is proposed in this work. The model parameters are treated as quadratic polynomial functions with respect to stress and temperature. A series of uniaxial compressive creep experiments are performed at various stress and temperature conditions in order to determine these parameter functions, and then the proposed model is validated by comparison between the predictions and experiments at the other loading conditions. It is shown that very small permanent deformation at low stress and temperature increases rapidly with elevated stress or temperature and the damage may initiate in the stationary stage but mainly develops in the accelerated stage. Compared with the visco-elastoplastic models without damage, the predictions from the proposed model is in better agreement with the experiments, and can better capture the rate-dependency in creep responses of asphalt mastic especially below its softening point of 47 ℃
基金Projects(41072238,51009133)supported by the National Natural Science Foundation of China
文摘The long-term stability of large-span soft rock tunnel is influenced greatly by the creep effect of surrounding rock.The development of a new type of foam concrete which has the property of high compressibility and low ductility was introduced.And it was made as filling material of reserved deformation layer between the first lining and the second lining used in large-span soft rock tunnel.The effect of the new type of foam concrete was simulated as filling material of reserved deformation layer using numerical simulation.Through the comparison with the common large-span soft rock tunnel,the vault settlement and surrounding convergence are reduced by about 61% and 45%,respectively,after creep of 100 a.And in the second lining,the plastic zone reduces apparently and the maximum equivalent plastic strain decreases relatively.So,it can be found that the application of the new type of foam concrete as the filling material of reserved deformation layer can relieve the excessive force in second lining induced by rock creep,reduce its deformation and improve the stability of tunnel.
基金Project(50801034)supported by the National Natural Science Foundation of ChinaProject(LJQ 2011026)supported by Development Foundation for Excellent Young Scholars in Universities of Liaoning Province,ChinaProject(2006207)supported by Foundation for "Ten-Hundred-Thousand" High-end Talent Introduction Project in Liaoning Province,China
文摘Tensile behaviors of an AZS0 alloy were investigated by elongation-to-failure tensile tests at 300, 350, 400 and 450 ℃, and strain rates of 10-2 and 10-3 s 1. Strain-rate-change tests from 5×10-5 s-1 to 2x10-2 s-1 were applied to study deformation mechanisms. The experimental data show that the material exhibits enhanced tensile ductilities of over 100% at 400 and 450 ℃ with stress exponent of 4.29 and activation energy of 149.60 kJ/mol, and initial fine grains preserve in evenly deformed gauge based on microstructure studies. The enhanced tensile ductilities are rate controlled by a competitive mechanism of grain boundary sliding and dislocation climb creep, based on which a model can successfully simulate the deformation behavior.
基金Projects (51174228,51274249) supported by the National Natural Science Foundation of China
文摘Based on the uniaxial compression creep experiments conducted on bauxite sandstone obtained from Sanmenxia,typical creep experiment curves were obtained.From the characteristics of strain component of creep curves,the creep strain is composed of instantaneous elastic strain,ε（me）,instantaneous plastic strain,ε（mp）,viscoelastic strain,ε（ce）,and viscoplastic strain,ε（cp）.Based on the characteristics of instantaneous plastic strain,a new element of instantaneous plastic rheology was introduced,instantaneous plastic modulus was defined,and the modified Burgers model was established.Then identification of direct screening method in this model was completed.According to the mechanical properties of rheological elements,one- and three-dimensional creep equations in different stress levels were obtained.One-dimensional model parameters were identified by the method of least squares,and in the process of computation,Gauss-Newton iteration method was applied.Finally,by fitting the experimental curves,the correctness of direct method model was verified,then the examination of posterior exclusive method of the model was accomplished.The results showed that in the improved Burgers models,the rheological characteristics of sandstone are embodied properly,microscopic analysis of creep curves is also achieved,and the correctness of comprehensive identification method of rheological model is verified.
基金supported by the National Natural Science Foundation of China (Grant Nos. 51179003,11072016,11272031)the Specialized Research Fund for the Doctoral Program of Higher Education (Grant No.20091102110030)
文摘The influences of time on clays are discussed first,and the concept of the instant normal compression line is proposed by analyzing the existing theories and experimental results.Based on the creep law,the relationship between the aging time and the overconsolidation parameter is built.With the reloading equation of the UH model(unified hardening model for overconsolidated clays) used to calculate the instant compression deformation,a one-dimensional stress-strain-time relationship is proposed.Furthermore,the evolution of this relationship is analyzed,and the characteristic rate that is a function of the overconsolidation parameter is defined.Then a three-dimensional elastic-viscous-plastic constitutive model is suggested by incorporating equivalent time into the current yield function of the UH model.The new model can describe not only creep,rate effect and other viscous phenomena,but also shear dilatancy,strain softening and other behaviors of overconsolidated clays.Besides,compared with the modified Cam-clay model it requires only one additional parameter(the coefficient of secondary compression) to consider the creep law.Finally,because the proposed model can be changed into the UH model under instantaneous loading,the elastic-plastic and elastic-viscous-plastic frameworks are unified.
基金Project supported by the National Natural Science Foundation of China （Nos. 41240024, 41372285, 41272317, 51278449, and 51238009）, the Research Fund for the Doctoral Program of Higher Education of China （No. 20110073120012）, and the European Project CREEP （PIAPP-GA-2011-286397）
文摘Conventional consolidation tests on reconstituted specimens of numerous natural soft clays show a decreasing of creep index Cae with increasing soil density. Based on all selected and conducted experimental results, a modified creep index Cae＊ defined in double logarithmic plane lge-lgt, was plotted for various clays, from which Cae＊ can be assumed as a constant for different soil densities. Then, the modified creep index was applied to a newly developed elastic viscoplastic model. In this way, the modified creep index Ca＊ can naturally take into account the nonlinear Cae revealing the influence of soil density in the soil assemblies without additional parameters. Finally, the enhanced model was incorporated into the finite element code ABAQUS and used to simulate a consolidation test and a test embankment. The improvement of simulations by the modified creep index was highlighted by comparing simulations using the conventional creep index Cae.
