Over the past decade, ultraviolet(UV) detection has been a subject of major interest for both research scientists and engineers because of its important applications in both the civil and military fields. The rapid de...Over the past decade, ultraviolet(UV) detection has been a subject of major interest for both research scientists and engineers because of its important applications in both the civil and military fields. The rapid development of interdisciplinary research has enabled the realization of UV detectors based on a variety of principles. Among these devices, UV detectors based on surface acoustic wave(SAW) technology offer unique advantages of remote wireless operation capability and zero power consumption. This article provides a comprehensive review of the working principles, important parameters, and the acoustic wave and materials types used in SAW-based UV detectors. The research and development status of these detectors are discussed and the most commonly used methods to optimize device performance are also summarized. Novel types of acoustic UV detectors based on thin film bulk acoustic resonators(FBARs)and Lamb wave resonators(LMRs) are briefly introduced. Finally, future development challenges are proposed and suggestions for future directions are provided to aid the development of this important research field.展开更多
To improve the working and living environment of submarine crews, an integrated system of CO2 removal and O2 regeneration was designed to work under experimental conditions for 50 people in a submarine cabin during pr...To improve the working and living environment of submarine crews, an integrated system of CO2 removal and O2 regeneration was designed to work under experimental conditions for 50 people in a submarine cabin during prolonged voyages. The integrated system comprises a solid amine water desorption （SAWD） unit for CO2 collection and concentration, a Sabatier reactor for CO2 reduction and a solid polymer electrolyte （SPE） unit for O2 regeneration by electrolysis. The performances of the SAWD-Sabatier-SPE integrated system were investigated. The experimental results from the SAWD unit showed that the average CO2 concentration in the CO2 storage tank was more than 96% and the outlet CO2 concentration was nearly zero in the first 45 min, and less than 1/10 of inlet CO2 after 60 min when input CO2 was 0.5% （1000 L）. About 950 L of CO2 was recovered with a recovery rate of 92%-97%. The output CO2 concentration was less than 0.2%, which showed that the adsorption-desorption performance of this unit was excellent. In the CO2 reduction unit we investigated mainly the start-up and reaction performance of the Sabatier reactor. The start-up time of the Sabatier reactor was 6, 8 and 10 rain when the start-up temperature was 187.3, 179.5 and 168 ℃, respectively. The product water was colorless, transparent, and had a pH of 6.9-7.5, and an electrical conductivity of 80μs/cm. The sum of the concentration of metal ions （Ru^3＋, Al^3＋, Pb^2＋） was 0.028% and that of nonmetal ions （Cl^-, SO4^2-） was 0.05%. In the O2 regeneration unit, the O2 generation rate was 0.48 m^3/d and the quantity was 2400 L, sufficient to meet the submariners＇ basic oxygen demands. These results may be useful as a basis for establishing CO2-1evel limits and O2 regeneration systems in submarines or similar enclosed compartments during prolonged voyages.展开更多
Metamaterials with higher-order topological band gaps that exhibit topological physics beyond the bulkedge correspondence provide unique application values due to their ability of integrating topological boundary stat...Metamaterials with higher-order topological band gaps that exhibit topological physics beyond the bulkedge correspondence provide unique application values due to their ability of integrating topological boundary states at multiple dimensions in a single chip.On the other hand,in the past decade,micromechanical metamaterials are developing rapidly for various applications such as micro-piezoelectricgenerators,intelligent micro-systems,on-chip sensing and self-powered micro-systems.To empower these cutting-edge applications with topological manipulations of elastic waves,higher-order topological mechanical systems working at high frequencies(MHz)with high quality-factors are demanded.The current realizations of higher-order topological mechanical systems,however,are still limited to systems with large scales(centimetres)and low frequencies(k Hz).Here,we report the first experimental realization of an on-chip micromechanical metamaterial as the higher-order topological insulator for elastic waves at MHz.The higher-order topological phononic band gap is induced by the band inversion at the Brillouin zone corner which is achieved by configuring the orientations of the elliptic pillars etched on the silicon chip.With consistent experiments,theory and simulations,we demonstrate the emergence of coexisting topological edge and corner states in a single silicon chip as induced by the higher-order band topology.The experimental realization of on-chip micromechanical metamaterials with higherorder topology opens a new regime for materials and applications based on topological elastic waves.展开更多
Herein we extract all the frequency-dependent coupling-of-modes （COM） parameters, which will be used to the rapid simulation and optimal design of surface acoustic wave （SAW） devices. FEM/BEM is used to calculate ...Herein we extract all the frequency-dependent coupling-of-modes （COM） parameters, which will be used to the rapid simulation and optimal design of surface acoustic wave （SAW） devices. FEM/BEM is used to calculate the exact field distributions of forward and backward surface acoustic waves within a finite-length periodic grating at every frequency. The middle compo- nent of the grating, regarded as a periodic structure, is selected to be investigated which can satisfy the presupposition of the COM model. From these field distributions, the values of P-matrix elements of one cell are calculated. The COM parameters taken as functions of frequency are accurately obtained. Specifically, the frequency-dependent relationships of reflection coefficient and propagation velocity are obtained independently. Using the resultant COM parameters, a one-port resonator on the substrate of 128°YX-LiNbO3 is simulated and the admittance curve shows good agreement with the simulating results using FEM/BEM. These results verify the validity and accuracy of this method.展开更多
In order to reduce the noises affixed to the signals when testing high frequency devices,a single-port test mode(S11) is used to test frequency response of high frequency(GHz) and dual-port surface acoustic wave devic...In order to reduce the noises affixed to the signals when testing high frequency devices,a single-port test mode(S11) is used to test frequency response of high frequency(GHz) and dual-port surface acoustic wave devices(SAWDs) in this paper.The feasibility of the test is proved by simulating the Fabry-perot model.The frequency response of the high-frequency dual-port resonant-type diamond SAWD is measured by S11 and the dual-port test mode(S21),respectively.The results show that the quality factor of the device is 51.29 and the 3 dB bandwidth is 27.8 MHz by S11-mode measurement,which is better than the S21 mode,and is consistent with the frequency response curve by simulation.展开更多
基金This work was supported by China Scholarship Council,the National Natural Science Foundation of China(61974107)Hubei Provincial Major Program of Technological Innovation(2019AAA052,2017AAA121).
文摘Over the past decade, ultraviolet(UV) detection has been a subject of major interest for both research scientists and engineers because of its important applications in both the civil and military fields. The rapid development of interdisciplinary research has enabled the realization of UV detectors based on a variety of principles. Among these devices, UV detectors based on surface acoustic wave(SAW) technology offer unique advantages of remote wireless operation capability and zero power consumption. This article provides a comprehensive review of the working principles, important parameters, and the acoustic wave and materials types used in SAW-based UV detectors. The research and development status of these detectors are discussed and the most commonly used methods to optimize device performance are also summarized. Novel types of acoustic UV detectors based on thin film bulk acoustic resonators(FBARs)and Lamb wave resonators(LMRs) are briefly introduced. Finally, future development challenges are proposed and suggestions for future directions are provided to aid the development of this important research field.
基金supported by the National Natural Science Foundation of China (No. 50908062)the State Key Lab of Urban Water Resource and Environment (No. HIT-QAK200808)the Heilongjiang Natural Science Foundation (No. E2007-04), China
文摘To improve the working and living environment of submarine crews, an integrated system of CO2 removal and O2 regeneration was designed to work under experimental conditions for 50 people in a submarine cabin during prolonged voyages. The integrated system comprises a solid amine water desorption （SAWD） unit for CO2 collection and concentration, a Sabatier reactor for CO2 reduction and a solid polymer electrolyte （SPE） unit for O2 regeneration by electrolysis. The performances of the SAWD-Sabatier-SPE integrated system were investigated. The experimental results from the SAWD unit showed that the average CO2 concentration in the CO2 storage tank was more than 96% and the outlet CO2 concentration was nearly zero in the first 45 min, and less than 1/10 of inlet CO2 after 60 min when input CO2 was 0.5% （1000 L）. About 950 L of CO2 was recovered with a recovery rate of 92%-97%. The output CO2 concentration was less than 0.2%, which showed that the adsorption-desorption performance of this unit was excellent. In the CO2 reduction unit we investigated mainly the start-up and reaction performance of the Sabatier reactor. The start-up time of the Sabatier reactor was 6, 8 and 10 rain when the start-up temperature was 187.3, 179.5 and 168 ℃, respectively. The product water was colorless, transparent, and had a pH of 6.9-7.5, and an electrical conductivity of 80μs/cm. The sum of the concentration of metal ions （Ru^3＋, Al^3＋, Pb^2＋） was 0.028% and that of nonmetal ions （Cl^-, SO4^2-） was 0.05%. In the O2 regeneration unit, the O2 generation rate was 0.48 m^3/d and the quantity was 2400 L, sufficient to meet the submariners＇ basic oxygen demands. These results may be useful as a basis for establishing CO2-1evel limits and O2 regeneration systems in submarines or similar enclosed compartments during prolonged voyages.
基金supported by the Natural Science Foundation of Guangdong Province(2020A1515010549)China Postdoctoral Science Foundation(2020M672615 and 2019M662885)+1 种基金National Postdoctoral Program for Innovative Talents(BX20190122)the Jiangsu specially-appointed professor funding。
文摘Metamaterials with higher-order topological band gaps that exhibit topological physics beyond the bulkedge correspondence provide unique application values due to their ability of integrating topological boundary states at multiple dimensions in a single chip.On the other hand,in the past decade,micromechanical metamaterials are developing rapidly for various applications such as micro-piezoelectricgenerators,intelligent micro-systems,on-chip sensing and self-powered micro-systems.To empower these cutting-edge applications with topological manipulations of elastic waves,higher-order topological mechanical systems working at high frequencies(MHz)with high quality-factors are demanded.The current realizations of higher-order topological mechanical systems,however,are still limited to systems with large scales(centimetres)and low frequencies(k Hz).Here,we report the first experimental realization of an on-chip micromechanical metamaterial as the higher-order topological insulator for elastic waves at MHz.The higher-order topological phononic band gap is induced by the band inversion at the Brillouin zone corner which is achieved by configuring the orientations of the elliptic pillars etched on the silicon chip.With consistent experiments,theory and simulations,we demonstrate the emergence of coexisting topological edge and corner states in a single silicon chip as induced by the higher-order band topology.The experimental realization of on-chip micromechanical metamaterials with higherorder topology opens a new regime for materials and applications based on topological elastic waves.
基金supported by the National Natural Science Foundation of China(Grant Nos. 10774073 and 11174143)
文摘Herein we extract all the frequency-dependent coupling-of-modes （COM） parameters, which will be used to the rapid simulation and optimal design of surface acoustic wave （SAW） devices. FEM/BEM is used to calculate the exact field distributions of forward and backward surface acoustic waves within a finite-length periodic grating at every frequency. The middle compo- nent of the grating, regarded as a periodic structure, is selected to be investigated which can satisfy the presupposition of the COM model. From these field distributions, the values of P-matrix elements of one cell are calculated. The COM parameters taken as functions of frequency are accurately obtained. Specifically, the frequency-dependent relationships of reflection coefficient and propagation velocity are obtained independently. Using the resultant COM parameters, a one-port resonator on the substrate of 128°YX-LiNbO3 is simulated and the admittance curve shows good agreement with the simulating results using FEM/BEM. These results verify the validity and accuracy of this method.
基金supported by the National Natural Science Foundation of China (Nos.50972105 and 60806030)Tianjin Natural Science Foundation (Nos.09JCZDJC16500,08JCYBJC14600 and ZD200709)
文摘In order to reduce the noises affixed to the signals when testing high frequency devices,a single-port test mode(S11) is used to test frequency response of high frequency(GHz) and dual-port surface acoustic wave devices(SAWDs) in this paper.The feasibility of the test is proved by simulating the Fabry-perot model.The frequency response of the high-frequency dual-port resonant-type diamond SAWD is measured by S11 and the dual-port test mode(S21),respectively.The results show that the quality factor of the device is 51.29 and the 3 dB bandwidth is 27.8 MHz by S11-mode measurement,which is better than the S21 mode,and is consistent with the frequency response curve by simulation.
