Currently,the carbothermal reduction-nitridation(CRN)process is the predominant method for preparing aluminum nitride(AlN)powder.Although AlN powder prepared by CRN process exhibits high purity and excellent sintering...Currently,the carbothermal reduction-nitridation(CRN)process is the predominant method for preparing aluminum nitride(AlN)powder.Although AlN powder prepared by CRN process exhibits high purity and excellent sintering activity,it also presents challenges such as the necessity for high reaction temperatures and difficulties in achieving uniform mixing of its raw materials.This study presents a comprehensive investigation into preparation process of AlN nanopowders using a combination of hydrothermal synthesis and CRN.In the hydrothermal reaction,a homogeneous composite precursor consisting of carbon and boehmite(γ-AlOOH)is synthesized at 200℃using aluminum nitrate as the aluminum source,sucrose as the carbon source,and urea as the precipitant.During the hydrothermal process,the precursor develops a core-shell structure,with boehmite tightly coated with carbon(γ-AlOOH@C)due to electrostatic attraction.Compared with conventional precursor,the hydrothermal hybrid offers many advantages,such as ultrafine particles,uniform particle size distribution,good dispersion,high reactivity,and environmental friendliness.The carbon shell enhances thermodynamic stability of γ-Al_(2)O_(3) compared to the corundum phase(α-Al_(2)O_(3))by preventing the loss of the surface area in alumina.This stability enables γ-Al_(2)O_(3) to maintain high reactivity during CRN process,which initiates at 1300℃,and concludes at 1400℃.The underlying mechanisms are substantiated through experiments and thermodynamic calculations.This research provides a robust theoretical and experimental foundation for the hydrothermal combined carbothermal preparation of non-oxide ceramic nanopowders.展开更多
β-Sialon/ZrN/ZrON composites were successfully fabricated by an in-situ carbothermal reduction？nitridation process with fly ash, zircon and active carbon as raw materials. The effects of raw materials composition an...β-Sialon/ZrN/ZrON composites were successfully fabricated by an in-situ carbothermal reduction？nitridation process with fly ash, zircon and active carbon as raw materials. The effects of raw materials composition and holding time on synthesis process were investigated, and the formation process of the composites was also discussed. The phase composition and microstructure of the composites were characterized by means of XRD and SEM. It was found that increasing carbon content in a sample and holding time could promote the formation of β-Sialon, ZrN and ZrON. The proper processing parameters to synthesize β-Sialon/ZrN/ZrON composites were mass ratio of zircon to fly ash to active carbon of 49：100：100, synthesis temperature of 1550 °C and holding time of 15 h. The average grain size ofβ-Sialon and ZrN（ZrON） synthesized at 1550 °C for 15 h reached about 2 and 1μm, respectively. The fabrication process ofβ-Sialon/ZrN/ZrON composites included the formation ofβ-Sialon and ZrO2 as well as the conversion of ZrO2 to ZrN and ZrON.展开更多
β-Sialon based composites were successfully prepared from fly ash and carbon black under nitrogen atmosphere by carbothermal reduction-nitridation process. Effects of heating temperature and raw materials composition...β-Sialon based composites were successfully prepared from fly ash and carbon black under nitrogen atmosphere by carbothermal reduction-nitridation process. Effects of heating temperature and raw materials composition on synthesis process were investigated, and the formation process of the composites was also discussed. The phase composition and microstructure of the composites were characterized by X-ray diffraction and scanning electronic microscopy. The results show that increasing heating temperature or mass ratio of carbon black to fly ash can promote the formation of β-Sialon. The β-Sialon based composites can be synthesized at 1723 K for 6 h while heating the sample with mass ratio of carbon black to fly ash of 0.56. The as-received β-Sialon in the composites exists as granular with an average particle size of 2-3 μm. The preparation process of β-Sialon based composites includes the formation of O′-Sialon, X-Sialon and β-Sialon as well as the conversion processes of O′-Sialon and X-Sialon to β-Sialon.展开更多
The preparation of fine TiC powders by carbothermal reduction of TiO2 in vacuum was investigated by XRD,SEM,XRF and laser particle sizer.Thermodynamic analysis indicates that it is easy to prepare TiC in vacuum and th...The preparation of fine TiC powders by carbothermal reduction of TiO2 in vacuum was investigated by XRD,SEM,XRF and laser particle sizer.Thermodynamic analysis indicates that it is easy to prepare TiC in vacuum and the formation sequence of products are Ti4O7（Magneli phase）,Ti3O5,Ti2O3,TiCxO1-x and TiC with the increase of reaction temperature.Experimental results demonstrate that TiC powders with single phase are obtained with molar ratio of TiO2 to C ranging from 1：3.2 to 1：6 at 1 550 ℃ for 4 h when the system pressure is 50 Pa,and TiC1.0 is gained when the molar ratio of TiO2 to C is 1：4 and 1：5.In addition,fine TiC1.0 powders（D50 equals 3.04 μm） with single phase and low impurities are obtained when the molar ratio of TiO2 to C is 1：4.SEM observation shows that uniform shape,low agglomeration,and loose structure are observed on the surface of block product.展开更多
A novel catalyst for CO2 electroreduction based on nanostructured SnO2 was synthesized using a facile hydrothermal self-assembly method. The electrochemical activity showed that the catalyst gave outstanding catalytic...A novel catalyst for CO2 electroreduction based on nanostructured SnO2 was synthesized using a facile hydrothermal self-assembly method. The electrochemical activity showed that the catalyst gave outstanding catalytic activity and selectivity in CO2 electroreduction. The catalytic activity and formate selectivity depended strongly on the electrolyte conditions. A high faradaic efficiency, i.e., 56%, was achieved for formate formation in KHCO3 （0.5 mol/L）. This is attributed to control of formate production by mass and charge transfer processes. Electrolysis experiments using SnO2-50/GDE （an SnOz-based gas-diffusion electrode, where 50 indicates the 50% ethanol content of the electrolyte） as the catalyst, showed that the electrolyte pH also affected CO2 reduction. The optimum electrolyte pH for obtaining a high faradaic efficiency for formate production was 8.3. This is mainly because a neutral or mildly alkaline environment maintains the oxide stability. The fara- daic efficiency for formate production declined with time. X-ray photoelectron spectroscopy showed that this is the result of deposition of trace amounts of fluoride ions on the SnO2-50/GDE surface, which hinders reduction of CO2 to formate.展开更多
Pure Ca-SiAlON:Eu2+ was synthesized by microwave sintering method at a relatively low temperature of 1550℃.Photoluminescence intensity of the resultant phosphor was higher than those of the samples synthesized by con...Pure Ca-SiAlON:Eu2+ was synthesized by microwave sintering method at a relatively low temperature of 1550℃.Photoluminescence intensity of the resultant phosphor was higher than those of the samples synthesized by conventional gas-pressure sintering technique at 1750℃.When it was excited at 450 nm,the as-prepared yellow Ca-SiAlON:Eu2+ sample had an external quantum efficiency of 42%,comparable to the sample synthesized at 1750℃ under 0.5 MPaN2 gas pressure by the GPS method reported in reference.The experimental results demonstrated that the microwave sintering method was also an interesting approach for synthesizing nitride phosphors,which promises lower firing temperature than those by carbothermal reduction and nitridation (CRN) methods,higher heating rate and shorter duration time compared with those by gas-pressure sintering.展开更多
基金National Key Research and Development Program of China(2022YFB3708500,2023YFB3611000)Fujian Science&Technology Innovation Laboratory for Optoelectronic Information of China(2020ZZ109)。
文摘Currently,the carbothermal reduction-nitridation(CRN)process is the predominant method for preparing aluminum nitride(AlN)powder.Although AlN powder prepared by CRN process exhibits high purity and excellent sintering activity,it also presents challenges such as the necessity for high reaction temperatures and difficulties in achieving uniform mixing of its raw materials.This study presents a comprehensive investigation into preparation process of AlN nanopowders using a combination of hydrothermal synthesis and CRN.In the hydrothermal reaction,a homogeneous composite precursor consisting of carbon and boehmite(γ-AlOOH)is synthesized at 200℃using aluminum nitrate as the aluminum source,sucrose as the carbon source,and urea as the precipitant.During the hydrothermal process,the precursor develops a core-shell structure,with boehmite tightly coated with carbon(γ-AlOOH@C)due to electrostatic attraction.Compared with conventional precursor,the hydrothermal hybrid offers many advantages,such as ultrafine particles,uniform particle size distribution,good dispersion,high reactivity,and environmental friendliness.The carbon shell enhances thermodynamic stability of γ-Al_(2)O_(3) compared to the corundum phase(α-Al_(2)O_(3))by preventing the loss of the surface area in alumina.This stability enables γ-Al_(2)O_(3) to maintain high reactivity during CRN process,which initiates at 1300℃,and concludes at 1400℃.The underlying mechanisms are substantiated through experiments and thermodynamic calculations.This research provides a robust theoretical and experimental foundation for the hydrothermal combined carbothermal preparation of non-oxide ceramic nanopowders.
基金Project(2013AA030902)supported by the National High-tech Research and Development Program of ChinaProjects(51074038,51274057)supported by the National Natural Science Foundation of China+2 种基金Projects(N120402006,N100302002)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(L2012079)supported by the Educational Commission of Liaoning Province of ChinaProject(110215)supported by the Training Program on National College Students Innovation Experiment
文摘β-Sialon/ZrN/ZrON composites were successfully fabricated by an in-situ carbothermal reduction？nitridation process with fly ash, zircon and active carbon as raw materials. The effects of raw materials composition and holding time on synthesis process were investigated, and the formation process of the composites was also discussed. The phase composition and microstructure of the composites were characterized by means of XRD and SEM. It was found that increasing carbon content in a sample and holding time could promote the formation of β-Sialon, ZrN and ZrON. The proper processing parameters to synthesize β-Sialon/ZrN/ZrON composites were mass ratio of zircon to fly ash to active carbon of 49：100：100, synthesis temperature of 1550 °C and holding time of 15 h. The average grain size ofβ-Sialon and ZrN（ZrON） synthesized at 1550 °C for 15 h reached about 2 and 1μm, respectively. The fabrication process ofβ-Sialon/ZrN/ZrON composites included the formation ofβ-Sialon and ZrO2 as well as the conversion of ZrO2 to ZrN and ZrON.
基金Project (51074038) supported by the National Natural Science Foundation of ChinaProject (N100302002) supported by the Fundamental Research Funds for the Central Universities, China
文摘β-Sialon based composites were successfully prepared from fly ash and carbon black under nitrogen atmosphere by carbothermal reduction-nitridation process. Effects of heating temperature and raw materials composition on synthesis process were investigated, and the formation process of the composites was also discussed. The phase composition and microstructure of the composites were characterized by X-ray diffraction and scanning electronic microscopy. The results show that increasing heating temperature or mass ratio of carbon black to fly ash can promote the formation of β-Sialon. The β-Sialon based composites can be synthesized at 1723 K for 6 h while heating the sample with mass ratio of carbon black to fly ash of 0.56. The as-received β-Sialon in the composites exists as granular with an average particle size of 2-3 μm. The preparation process of β-Sialon based composites includes the formation of O′-Sialon, X-Sialon and β-Sialon as well as the conversion processes of O′-Sialon and X-Sialon to β-Sialon.
基金Project(u0837604)supported by the Natural Science Foundation of Yunnan Province,ChinaProject(51004058)supported by the National Natural Science Foundation of ChinaProject(20095314110003)supported by Specialized Research Fund for the Doctoral Program of Higher Education
文摘The preparation of fine TiC powders by carbothermal reduction of TiO2 in vacuum was investigated by XRD,SEM,XRF and laser particle sizer.Thermodynamic analysis indicates that it is easy to prepare TiC in vacuum and the formation sequence of products are Ti4O7（Magneli phase）,Ti3O5,Ti2O3,TiCxO1-x and TiC with the increase of reaction temperature.Experimental results demonstrate that TiC powders with single phase are obtained with molar ratio of TiO2 to C ranging from 1：3.2 to 1：6 at 1 550 ℃ for 4 h when the system pressure is 50 Pa,and TiC1.0 is gained when the molar ratio of TiO2 to C is 1：4 and 1：5.In addition,fine TiC1.0 powders（D50 equals 3.04 μm） with single phase and low impurities are obtained when the molar ratio of TiO2 to C is 1：4.SEM observation shows that uniform shape,low agglomeration,and loose structure are observed on the surface of block product.
基金supported by the Innovation Program of the Shanghai Municipal Education Commission(14ZZ074)the International Academic Coop-eration and Exchange Program of Shanghai Science and Technology Committee(14520721900)+1 种基金Graduate Innovation Fund of Donghua University(15D311304)the College of Environmental Science and Engineering,State Environmental Protection Engineering Center for Pollution Treatment and Control in Textile Industry,Donghua University.All the financial supports are gratefully acknowledged~~
文摘A novel catalyst for CO2 electroreduction based on nanostructured SnO2 was synthesized using a facile hydrothermal self-assembly method. The electrochemical activity showed that the catalyst gave outstanding catalytic activity and selectivity in CO2 electroreduction. The catalytic activity and formate selectivity depended strongly on the electrolyte conditions. A high faradaic efficiency, i.e., 56%, was achieved for formate formation in KHCO3 （0.5 mol/L）. This is attributed to control of formate production by mass and charge transfer processes. Electrolysis experiments using SnO2-50/GDE （an SnOz-based gas-diffusion electrode, where 50 indicates the 50% ethanol content of the electrolyte） as the catalyst, showed that the electrolyte pH also affected CO2 reduction. The optimum electrolyte pH for obtaining a high faradaic efficiency for formate production was 8.3. This is mainly because a neutral or mildly alkaline environment maintains the oxide stability. The fara- daic efficiency for formate production declined with time. X-ray photoelectron spectroscopy showed that this is the result of deposition of trace amounts of fluoride ions on the SnO2-50/GDE surface, which hinders reduction of CO2 to formate.
基金supported by the National Natural Science Foundation of China(51102252 and 51272259)the Special Foundation for Young Scientists of Zhejiang Province(R12E020005)
文摘Pure Ca-SiAlON:Eu2+ was synthesized by microwave sintering method at a relatively low temperature of 1550℃.Photoluminescence intensity of the resultant phosphor was higher than those of the samples synthesized by conventional gas-pressure sintering technique at 1750℃.When it was excited at 450 nm,the as-prepared yellow Ca-SiAlON:Eu2+ sample had an external quantum efficiency of 42%,comparable to the sample synthesized at 1750℃ under 0.5 MPaN2 gas pressure by the GPS method reported in reference.The experimental results demonstrated that the microwave sintering method was also an interesting approach for synthesizing nitride phosphors,which promises lower firing temperature than those by carbothermal reduction and nitridation (CRN) methods,higher heating rate and shorter duration time compared with those by gas-pressure sintering.
