为有效提升工程水泥基复合材料(engineered cementitious composite, ECC)强度的同时,充分发挥其优异的控裂和变形能力,本文采用极限拉应变与ECC接近且粘结性能优良的高强不锈钢绞线网(high-strength stainless steel strand mesh, HSSM...为有效提升工程水泥基复合材料(engineered cementitious composite, ECC)强度的同时,充分发挥其优异的控裂和变形能力,本文采用极限拉应变与ECC接近且粘结性能优良的高强不锈钢绞线网(high-strength stainless steel strand mesh, HSSM)增强ECC,并进行HSSM增强ECC板受弯性能的数值分析。采用ABAQUS软件,考虑钢绞线与ECC之间的粘结–滑移作用,建立有限元模型模拟ECC在弯曲过程中的非线性行为。此外,通过参数分析探明了钢绞线配筋率、板尺寸和ECC材料参数等变量对板抗弯性能的影响。结果表明:增加配筋率、板的截面高度、ECC的开裂强度和极限抗拉强度,可显著提高了板的抗弯刚度和承载能力,但延性有所降低;提高ECC的抗压强度,可有效提高板的延性,同时板的承载力和刚度也有小幅提升。In order to effectively improve the strength of engineered cementitious composite (ECC) while giving full play to its good crack control and deformation capabilities, this paper uses high-strength stainless steel strand mesh (HSSM) with ultimate tensile strain close to that of ECC and good bond performance to reinforce ECC, and conducts numerical analysis on the flexural performance of HSSM-reinforced ECC slabs. Using the ABAQUS software, a finite element model was established to simulate the nonlinear behavior of ECC under bending, considering the bond-slip interactions between the steel strands and ECC. Additionally, parametric analysis was carried out to investigate the influence of variables such as steel strand reinforcement ratio, slab dimensions, and material properties of ECC on the flexural performance of the slabs. The results indicate that increasing the reinforcement ratio, the cross-sectional height of the slab, the cracking strength and ultimate tensile strength of ECC can significantly enhance the flexural stiffness and load-bearing capacity of the slab, but its ductility is reduced. Increasing the compressive strength of ECC can effectively improve the ductility of the slab, while also slightly enhancing its load-bearing capacity and stiffness.展开更多
文摘为有效提升工程水泥基复合材料(engineered cementitious composite, ECC)强度的同时,充分发挥其优异的控裂和变形能力,本文采用极限拉应变与ECC接近且粘结性能优良的高强不锈钢绞线网(high-strength stainless steel strand mesh, HSSM)增强ECC,并进行HSSM增强ECC板受弯性能的数值分析。采用ABAQUS软件,考虑钢绞线与ECC之间的粘结–滑移作用,建立有限元模型模拟ECC在弯曲过程中的非线性行为。此外,通过参数分析探明了钢绞线配筋率、板尺寸和ECC材料参数等变量对板抗弯性能的影响。结果表明:增加配筋率、板的截面高度、ECC的开裂强度和极限抗拉强度,可显著提高了板的抗弯刚度和承载能力,但延性有所降低;提高ECC的抗压强度,可有效提高板的延性,同时板的承载力和刚度也有小幅提升。In order to effectively improve the strength of engineered cementitious composite (ECC) while giving full play to its good crack control and deformation capabilities, this paper uses high-strength stainless steel strand mesh (HSSM) with ultimate tensile strain close to that of ECC and good bond performance to reinforce ECC, and conducts numerical analysis on the flexural performance of HSSM-reinforced ECC slabs. Using the ABAQUS software, a finite element model was established to simulate the nonlinear behavior of ECC under bending, considering the bond-slip interactions between the steel strands and ECC. Additionally, parametric analysis was carried out to investigate the influence of variables such as steel strand reinforcement ratio, slab dimensions, and material properties of ECC on the flexural performance of the slabs. The results indicate that increasing the reinforcement ratio, the cross-sectional height of the slab, the cracking strength and ultimate tensile strength of ECC can significantly enhance the flexural stiffness and load-bearing capacity of the slab, but its ductility is reduced. Increasing the compressive strength of ECC can effectively improve the ductility of the slab, while also slightly enhancing its load-bearing capacity and stiffness.
