For the purpose of establishing and validating aerodynamic performance predictions at transonic Mach numbers, a wind tunnel test was conducted in the High-Speed Tunnel（HST） of the German-Dutch Wind Tunnels. The test...For the purpose of establishing and validating aerodynamic performance predictions at transonic Mach numbers, a wind tunnel test was conducted in the High-Speed Tunnel（HST） of the German-Dutch Wind Tunnels. The test article is the aerodynamic validation model from the Chinese Aeronautical Establishment, which is a full-span scale model representation of a business jet aircraft. The wind tunnel test comprised of parallel deployments of balance, pressures, infrared thermography, and model marker measurement techniques. Dedicated investigations with a dummy support were conducted as well, in order to derive and correct for the interference that the support system imposed on the overall model loads. This enabled the establishment of a comprehensive dataset in which the steady overall model loads, the wing load distribution, the state of the wing boundary layer, and the aeroelastic wing shape were quantified for conditions up to and beyond the cruise Mach number of 0.85.展开更多
The Chinese Aeronautical Establishment（CAE） Aerodynamic Validation Model（AVM）is a dual-purpose test geometry dedicated to verify the aerodynamic performance of a conceptual intercontinental jet aircraft and to pro...The Chinese Aeronautical Establishment（CAE） Aerodynamic Validation Model（AVM）is a dual-purpose test geometry dedicated to verify the aerodynamic performance of a conceptual intercontinental jet aircraft and to provide a dataset for CFD software validation. To this end, a scaled model of the AVM was tested in the High-Speed Tunnel（HST） of the German-Dutch Wind-tunnels（DNW） with special test consideration and instrumentation. For complementary analysis of experimental results, specific CAE-AVM geometries are analyzed using a CAE inhouse CFD code. The specific geometries consist of a baseline aircraft, an aircraft with a deformed wing shape, and an aircraft with both a deformed wing shape and a representation of the model support system used in the wind tunnel. Detailed analysis of numerical and experimental results is presented; both the combined and individual attributions of wing deformation and support system interference on wing pressure distributions and longitudinal aerodynamic characteristics are summarized.展开更多
A modern transonic computational fluid dynamics test case is described in this paper,which is the Aerodynamic Validation Model（AVM） from the Chinese Aeronautical Establishment（CAE）. The CAE-AVM is a representation...A modern transonic computational fluid dynamics test case is described in this paper,which is the Aerodynamic Validation Model（AVM） from the Chinese Aeronautical Establishment（CAE）. The CAE-AVM is a representation of a modern transonic business jet aircraft with a design Mach number of 0.85. Numerical simulations for the AVM are conducted for two geometries： one baseline geometry, and one geometry that includes the applied model support system of the wind tunnel as well as the deformed wing shape that occurred during wind tunnel testing. The combined influence of wing deformation and model support interference on local and integral aerodynamic features is presented. Comparisons between CFD and experimental results are made; reasons of discrepancy between results from considered cases are analyzed.展开更多
文摘For the purpose of establishing and validating aerodynamic performance predictions at transonic Mach numbers, a wind tunnel test was conducted in the High-Speed Tunnel（HST） of the German-Dutch Wind Tunnels. The test article is the aerodynamic validation model from the Chinese Aeronautical Establishment, which is a full-span scale model representation of a business jet aircraft. The wind tunnel test comprised of parallel deployments of balance, pressures, infrared thermography, and model marker measurement techniques. Dedicated investigations with a dummy support were conducted as well, in order to derive and correct for the interference that the support system imposed on the overall model loads. This enabled the establishment of a comprehensive dataset in which the steady overall model loads, the wing load distribution, the state of the wing boundary layer, and the aeroelastic wing shape were quantified for conditions up to and beyond the cruise Mach number of 0.85.
文摘The Chinese Aeronautical Establishment（CAE） Aerodynamic Validation Model（AVM）is a dual-purpose test geometry dedicated to verify the aerodynamic performance of a conceptual intercontinental jet aircraft and to provide a dataset for CFD software validation. To this end, a scaled model of the AVM was tested in the High-Speed Tunnel（HST） of the German-Dutch Wind-tunnels（DNW） with special test consideration and instrumentation. For complementary analysis of experimental results, specific CAE-AVM geometries are analyzed using a CAE inhouse CFD code. The specific geometries consist of a baseline aircraft, an aircraft with a deformed wing shape, and an aircraft with both a deformed wing shape and a representation of the model support system used in the wind tunnel. Detailed analysis of numerical and experimental results is presented; both the combined and individual attributions of wing deformation and support system interference on wing pressure distributions and longitudinal aerodynamic characteristics are summarized.
基金supported by the Grant Agreement(No.4.628.21.0004)with the Ministry of Education and Science of the Russian Federation(project unique identifier RFMEFI62815X0004)on the theme‘‘Development and implementation of the optimization of the aircraft power plant aerodynamics as a part of a 3rd generation multidisciplinary optimization and its application to optimization of promising new types of aircraft”
文摘A modern transonic computational fluid dynamics test case is described in this paper,which is the Aerodynamic Validation Model（AVM） from the Chinese Aeronautical Establishment（CAE）. The CAE-AVM is a representation of a modern transonic business jet aircraft with a design Mach number of 0.85. Numerical simulations for the AVM are conducted for two geometries： one baseline geometry, and one geometry that includes the applied model support system of the wind tunnel as well as the deformed wing shape that occurred during wind tunnel testing. The combined influence of wing deformation and model support interference on local and integral aerodynamic features is presented. Comparisons between CFD and experimental results are made; reasons of discrepancy between results from considered cases are analyzed.
