Vertical hot ring rolling(VHRR) process has the characteristics of nonlinearity,time-variation and being susceptible to disturbance.Furthermore,the ring's growth is quite fast within a short time,and the rolled ri...Vertical hot ring rolling(VHRR) process has the characteristics of nonlinearity,time-variation and being susceptible to disturbance.Furthermore,the ring's growth is quite fast within a short time,and the rolled ring's position is asymmetrical.All of these cause that the ring's dimensions cannot be measured directly.Through analyzing the relationships among the dimensions of ring blanks,the positions of rolls and the ring's inner and outer diameter,the soft measurement model of ring's dimensions is established based on the radial basis function neural network(RBFNN).A mass of data samples are obtained from VHRR finite element(FE) simulations to train and test the soft measurement NN model,and the model's structure parameters are deduced and optimized by genetic algorithm(GA).Finally,the soft measurement system of ring's dimensions is established and validated by the VHRR experiments.The ring's dimensions were measured artificially and calculated by the soft measurement NN model.The results show that the calculation values of GA-RBFNN model are close to the artificial measurement data.In addition,the calculation accuracy of GA-RBFNN model is higher than that of RBFNN model.The research results suggest that the soft measurement NN model has high precision and flexibility.The research can provide practical methods and theoretical guidance for the accurate measurement of VHRR process.展开更多
Due to the increasing variety of information and services carried by optical networks, the survivability of network becomes an important problem in current research. The fault location of OTN is of great significance ...Due to the increasing variety of information and services carried by optical networks, the survivability of network becomes an important problem in current research. The fault location of OTN is of great significance for studying the survivability of optical networks. Firstly, a three-channel network model is established and analyzing common alarm data, the fault monitoring points and common fault points are carried out. The artificial neural network is introduced into the fault location field of OTN and it is used to judge whether the possible fault point exists or not. But one of the obvious limitations of general neural networks is that they receive a fixedsize vector as input and produce a fixed-size vector as the output. Not only that, these models is even fixed for mapping operations (for example, the number of layers in the model). The difference between the recurrent neural network and general neural networks is that it can operate on the sequence. In spite of the fact that the gradient disappears and the gradient explodes still exist in the neural network, the method of gradient shearing or weight regularization is adopted to solve this problem, and choose the LSTM (long-short term memory networks) to locate the fault. The output uses the concept of membership degree of fuzzy theory to express the possible fault point with the probability from 0 to 1. Priority is given to the treatment of fault points with high probability. The concept of F-Measure is also introduced, and the positioning effect is measured by using location time, MSE and F-Measure. The experiment shows that both LSTM and BP neural network can locate the fault of optical transport network well, but the overall effect of LSTM is better. The localization time of LSTM is shorter than that of BP neural network, and the F1-score of LSTM can reach 0.961566888396156 after 45 iterations, which meets the accuracy and real-time requirements of fault location. Therefore, it has good application prospect and practical value to introduce neural network into the fault location field of optical transport network.展开更多
Data evaluation strategies for the novel coupled MCC-IMS sensory system are developed. Mayor attention to the plausibility of applied procedures and the feasibility of automation was paid. Three stages of extraction l...Data evaluation strategies for the novel coupled MCC-IMS sensory system are developed. Mayor attention to the plausibility of applied procedures and the feasibility of automation was paid. Three stages of extraction levels with increasing data reduction are presented for several fields of application. According to suitable extraction levels, real data were tested on various structures of artificial neural networks (ANN) with the result, that the computational levels must still be chosen by expertise, but subsequent processing and training can be fully automated. For the training of larger net- works a method of automated generation of secondary training data is presented which exceeds the quality of previous noise models by far. It is concluded that the combination of MCC-IMS as measuring instrument and ANNs as evalua- tion technique have high potential for industrial use in process monitoring.展开更多
This article proposed an angle measurement method based on second harmonic generation(SHG)using an artifcial neural network(ANN).The method comprises three sequential parts:SHG spectrum collection,data preprocessing,a...This article proposed an angle measurement method based on second harmonic generation(SHG)using an artifcial neural network(ANN).The method comprises three sequential parts:SHG spectrum collection,data preprocessing,and neural network training.First,the referenced angles and SHG spectrums are collected by the autocollimator and SHG-based angle sensor,respectively,for training.The mapping is learned by the trained ANN after completing the training process,which solves the inverse problem of obtaining the angle from the SHG spectrum.Then,the feasibility of the proposed method is verifed in multiple-peak Maker fringe and single-peak phase-matching areas,with an overall angle measurement range exceeding 20,000 arcseconds.The predicted angles by ANN are compared with the autocollimator to evaluate the measure-ment performance in all the angular ranges.Particularly,a sub-arcsecond level of accuracy and resolution is achieved in the phase-matching area.展开更多
The establishment of a quantitative gait analysis system holds paramount importance,particularly in the context of functional rehabilitation of the lower limbs.Clinicians emphasize the imperative for sensors to be por...The establishment of a quantitative gait analysis system holds paramount importance,particularly in the context of functional rehabilitation of the lower limbs.Clinicians emphasize the imperative for sensors to be portable,compact,integrated,and non-intrusive,crucial characteristics in the rehabilitation field to facilitate their use and ensure optimal integration into care protocols.This study investigates an innovative approach aimed at reducing the reliance on body-fixed sensors by harnessing their data within a neural network,thus concentrating on the joint kinematics of the lower limbs.The primary objective is to estimate the flexion-extension angles of the hip,knee,and ankle during walking,utilizing data collected by two sensors positioned on the subject's legs.Initially,the neural network undergoes training with calculated data(leg tilt angles and angular velocities)sourced from the OpenSim database,followed by further refinement with experimental data obtained from a subject walking on a treadmill,wherein leg tilt angles and angular velocities are measured.The significance of this research is underscored by the demonstrated capability,through conducted tests,of the implemented networks to efficiently fuse data from a minimal set of sensors.Consequently,the proposed approach emerges as both practical and minimally intrusive,facilitating a robust evaluation of gait kinematic parameters.展开更多
In recent years, immune genetic algorithm (IGA) is gaining popularity for finding the optimal solution for non-linear optimization problems in many engineering applications. However, IGA with deterministic mutation fa...In recent years, immune genetic algorithm (IGA) is gaining popularity for finding the optimal solution for non-linear optimization problems in many engineering applications. However, IGA with deterministic mutation factor suffers from the problem of premature convergence. In this study, a modified self-adaptive immune genetic algorithm (MSIGA) with two memory bases, in which immune concepts are applied to determine the mutation parameters, is proposed to improve the searching ability of the algorithm and maintain population diversity. Performance comparisons with other well-known population-based iterative algorithms show that the proposed method converges quickly to the global optimum and overcomes premature problem. This algorithm is applied to optimize a feed forward neural network to measure the content of products in the combustion side reaction of p-xylene oxidation, and satisfactory results are obtained.展开更多
The purpose of this study is to present the numerical performancesand interpretations of the SEIR nonlinear system based on the Zika virusspreading by using the stochastic neural networks based intelligent computingso...The purpose of this study is to present the numerical performancesand interpretations of the SEIR nonlinear system based on the Zika virusspreading by using the stochastic neural networks based intelligent computingsolver. The epidemic form of the nonlinear system represents the four dynamicsof the patients, susceptible patients S(y), exposed patients hospitalized inhospital E(y), infected patients I(y), and recovered patients R(y), i.e., SEIRmodel. The computing numerical outcomes and performances of the systemare examined by using the artificial neural networks (ANNs) and the scaledconjugate gradient (SCG) for the training of the networks, i.e., ANNs-SCG.The correctness of the ANNs-SCG scheme is observed by comparing theproposed and reference solutions for three cases of the SEIR model to solvethe nonlinear system based on the Zika virus spreading dynamics throughthe knacks of ANNs-SCG procedure based on exhaustive experimentations.The outcomes of the ANNs-SCG algorithm are found consistently in goodagreement with standard numerical solutions with negligible errors. Moreover,the procedure’s constancy, dependability, and exactness are perceived by usingthe values of state transitions, error histogram measures, correlation, andregression analysis.展开更多
According to the test data of subdivision errors in the measuring cycle of angular measuring system, the characteristics of subdivision errors generated by this system are analyzed. It is found that the subdivision er...According to the test data of subdivision errors in the measuring cycle of angular measuring system, the characteristics of subdivision errors generated by this system are analyzed. It is found that the subdivision errors are mainly due to the rotary-type inductosyn itself. For the characteristic of cyclical change, the subdivision errors in other measuring cycles can be compensated by the subdivision error model in one measuring cycle. Using the measured error data as training samples, combining GA and BP algorithm, an ANN model of subdivision error is designed. Simulation results indicate that GA reduces the uncertainty in the training process of the ANN model, and enhances the generalization of the model. Compared with the error model based on the least-mean-squared method, the designed ANN model of subdivision errors can achieve higher compensating precision.展开更多
温度是影响材料力学性能的重要因素之一,准确测量器件温度是认识材料在应力作用下其力学性能演变以及评估设备健康状态和寿命的重要方式。面向功率器件开关过程中焊接界面快速温变测量的需求,传统方法存在时间分辨能力不足、难以测量瞬...温度是影响材料力学性能的重要因素之一,准确测量器件温度是认识材料在应力作用下其力学性能演变以及评估设备健康状态和寿命的重要方式。面向功率器件开关过程中焊接界面快速温变测量的需求,传统方法存在时间分辨能力不足、难以测量瞬态温度的问题。文中基于激光诱导元素特征谱线强度与温度的密切相关性,提出了一种微秒量级时间分辨能力的表面温度测量方法,并建立了样品表面温度与光谱特性之间的定量关系。研究结果表明,物质表面温度提升导致激光诱导等离子体光谱强度和信噪比增强,且增强效果受到光谱采集延时和门宽影响。采用反向传播-人工神经网络(back propagation-artificial neural network,BP-ANN)和偏最小二乘(partial least squares,PLS)法对表面温度与光谱特性关系定量拟合并校准,拟合模型线性相关性拟合度指标均大于0.99。BP-ANN拟合模型的拟合偏差更小,其均方根误差(root mean squared error,RMSE)为2.582,正确率为98.3%。该方法为物体瞬态温度测量提供了一种有效手段,对功率器件焊接界面健康状态的评估给予了有力支撑。展开更多
基金Project(51205299)supported by the National Natural Science Foundation of ChinaProject(2015M582643)supported by the China Postdoctoral Science Foundation+2 种基金Project(2014BAA008)supported by the Science and Technology Support Program of Hubei Province,ChinaProject(2014-IV-144)supported by the Fundamental Research Funds for the Central Universities of ChinaProject(2012AAA07-01)supported by the Major Science and Technology Achievements Transformation&Industrialization Program of Hubei Province,China
文摘Vertical hot ring rolling(VHRR) process has the characteristics of nonlinearity,time-variation and being susceptible to disturbance.Furthermore,the ring's growth is quite fast within a short time,and the rolled ring's position is asymmetrical.All of these cause that the ring's dimensions cannot be measured directly.Through analyzing the relationships among the dimensions of ring blanks,the positions of rolls and the ring's inner and outer diameter,the soft measurement model of ring's dimensions is established based on the radial basis function neural network(RBFNN).A mass of data samples are obtained from VHRR finite element(FE) simulations to train and test the soft measurement NN model,and the model's structure parameters are deduced and optimized by genetic algorithm(GA).Finally,the soft measurement system of ring's dimensions is established and validated by the VHRR experiments.The ring's dimensions were measured artificially and calculated by the soft measurement NN model.The results show that the calculation values of GA-RBFNN model are close to the artificial measurement data.In addition,the calculation accuracy of GA-RBFNN model is higher than that of RBFNN model.The research results suggest that the soft measurement NN model has high precision and flexibility.The research can provide practical methods and theoretical guidance for the accurate measurement of VHRR process.
文摘Due to the increasing variety of information and services carried by optical networks, the survivability of network becomes an important problem in current research. The fault location of OTN is of great significance for studying the survivability of optical networks. Firstly, a three-channel network model is established and analyzing common alarm data, the fault monitoring points and common fault points are carried out. The artificial neural network is introduced into the fault location field of OTN and it is used to judge whether the possible fault point exists or not. But one of the obvious limitations of general neural networks is that they receive a fixedsize vector as input and produce a fixed-size vector as the output. Not only that, these models is even fixed for mapping operations (for example, the number of layers in the model). The difference between the recurrent neural network and general neural networks is that it can operate on the sequence. In spite of the fact that the gradient disappears and the gradient explodes still exist in the neural network, the method of gradient shearing or weight regularization is adopted to solve this problem, and choose the LSTM (long-short term memory networks) to locate the fault. The output uses the concept of membership degree of fuzzy theory to express the possible fault point with the probability from 0 to 1. Priority is given to the treatment of fault points with high probability. The concept of F-Measure is also introduced, and the positioning effect is measured by using location time, MSE and F-Measure. The experiment shows that both LSTM and BP neural network can locate the fault of optical transport network well, but the overall effect of LSTM is better. The localization time of LSTM is shorter than that of BP neural network, and the F1-score of LSTM can reach 0.961566888396156 after 45 iterations, which meets the accuracy and real-time requirements of fault location. Therefore, it has good application prospect and practical value to introduce neural network into the fault location field of optical transport network.
文摘Data evaluation strategies for the novel coupled MCC-IMS sensory system are developed. Mayor attention to the plausibility of applied procedures and the feasibility of automation was paid. Three stages of extraction levels with increasing data reduction are presented for several fields of application. According to suitable extraction levels, real data were tested on various structures of artificial neural networks (ANN) with the result, that the computational levels must still be chosen by expertise, but subsequent processing and training can be fully automated. For the training of larger net- works a method of automated generation of secondary training data is presented which exceeds the quality of previous noise models by far. It is concluded that the combination of MCC-IMS as measuring instrument and ANNs as evalua- tion technique have high potential for industrial use in process monitoring.
基金supported by the Japan Society for the Promo-tion of Science(20H00211).
文摘This article proposed an angle measurement method based on second harmonic generation(SHG)using an artifcial neural network(ANN).The method comprises three sequential parts:SHG spectrum collection,data preprocessing,and neural network training.First,the referenced angles and SHG spectrums are collected by the autocollimator and SHG-based angle sensor,respectively,for training.The mapping is learned by the trained ANN after completing the training process,which solves the inverse problem of obtaining the angle from the SHG spectrum.Then,the feasibility of the proposed method is verifed in multiple-peak Maker fringe and single-peak phase-matching areas,with an overall angle measurement range exceeding 20,000 arcseconds.The predicted angles by ANN are compared with the autocollimator to evaluate the measure-ment performance in all the angular ranges.Particularly,a sub-arcsecond level of accuracy and resolution is achieved in the phase-matching area.
文摘The establishment of a quantitative gait analysis system holds paramount importance,particularly in the context of functional rehabilitation of the lower limbs.Clinicians emphasize the imperative for sensors to be portable,compact,integrated,and non-intrusive,crucial characteristics in the rehabilitation field to facilitate their use and ensure optimal integration into care protocols.This study investigates an innovative approach aimed at reducing the reliance on body-fixed sensors by harnessing their data within a neural network,thus concentrating on the joint kinematics of the lower limbs.The primary objective is to estimate the flexion-extension angles of the hip,knee,and ankle during walking,utilizing data collected by two sensors positioned on the subject's legs.Initially,the neural network undergoes training with calculated data(leg tilt angles and angular velocities)sourced from the OpenSim database,followed by further refinement with experimental data obtained from a subject walking on a treadmill,wherein leg tilt angles and angular velocities are measured.The significance of this research is underscored by the demonstrated capability,through conducted tests,of the implemented networks to efficiently fuse data from a minimal set of sensors.Consequently,the proposed approach emerges as both practical and minimally intrusive,facilitating a robust evaluation of gait kinematic parameters.
基金Supported by the Major State Basic Research Development Program of China (2012CB720500)the National Natural Science Foundation of China (Key Program: U1162202)+1 种基金the National Natural Science Foundation of China (General Program:61174118)Shanghai Leading Academic Discipline Project (B504)
文摘In recent years, immune genetic algorithm (IGA) is gaining popularity for finding the optimal solution for non-linear optimization problems in many engineering applications. However, IGA with deterministic mutation factor suffers from the problem of premature convergence. In this study, a modified self-adaptive immune genetic algorithm (MSIGA) with two memory bases, in which immune concepts are applied to determine the mutation parameters, is proposed to improve the searching ability of the algorithm and maintain population diversity. Performance comparisons with other well-known population-based iterative algorithms show that the proposed method converges quickly to the global optimum and overcomes premature problem. This algorithm is applied to optimize a feed forward neural network to measure the content of products in the combustion side reaction of p-xylene oxidation, and satisfactory results are obtained.
基金support from the NSRF via the program anagement Unit for Human Resources&Institutional Development,Research and Innovation[Grant number B05F640183]Chiang Mai University.Watcharaporn Cholamjiak would like to thank National Research Council of Thailand (N42A650334)Thailand Science Research and Innovation,the University of Phayao (Grant No.FF66-UoE).
文摘The purpose of this study is to present the numerical performancesand interpretations of the SEIR nonlinear system based on the Zika virusspreading by using the stochastic neural networks based intelligent computingsolver. The epidemic form of the nonlinear system represents the four dynamicsof the patients, susceptible patients S(y), exposed patients hospitalized inhospital E(y), infected patients I(y), and recovered patients R(y), i.e., SEIRmodel. The computing numerical outcomes and performances of the systemare examined by using the artificial neural networks (ANNs) and the scaledconjugate gradient (SCG) for the training of the networks, i.e., ANNs-SCG.The correctness of the ANNs-SCG scheme is observed by comparing theproposed and reference solutions for three cases of the SEIR model to solvethe nonlinear system based on the Zika virus spreading dynamics throughthe knacks of ANNs-SCG procedure based on exhaustive experimentations.The outcomes of the ANNs-SCG algorithm are found consistently in goodagreement with standard numerical solutions with negligible errors. Moreover,the procedure’s constancy, dependability, and exactness are perceived by usingthe values of state transitions, error histogram measures, correlation, andregression analysis.
文摘According to the test data of subdivision errors in the measuring cycle of angular measuring system, the characteristics of subdivision errors generated by this system are analyzed. It is found that the subdivision errors are mainly due to the rotary-type inductosyn itself. For the characteristic of cyclical change, the subdivision errors in other measuring cycles can be compensated by the subdivision error model in one measuring cycle. Using the measured error data as training samples, combining GA and BP algorithm, an ANN model of subdivision error is designed. Simulation results indicate that GA reduces the uncertainty in the training process of the ANN model, and enhances the generalization of the model. Compared with the error model based on the least-mean-squared method, the designed ANN model of subdivision errors can achieve higher compensating precision.
文摘温度是影响材料力学性能的重要因素之一,准确测量器件温度是认识材料在应力作用下其力学性能演变以及评估设备健康状态和寿命的重要方式。面向功率器件开关过程中焊接界面快速温变测量的需求,传统方法存在时间分辨能力不足、难以测量瞬态温度的问题。文中基于激光诱导元素特征谱线强度与温度的密切相关性,提出了一种微秒量级时间分辨能力的表面温度测量方法,并建立了样品表面温度与光谱特性之间的定量关系。研究结果表明,物质表面温度提升导致激光诱导等离子体光谱强度和信噪比增强,且增强效果受到光谱采集延时和门宽影响。采用反向传播-人工神经网络(back propagation-artificial neural network,BP-ANN)和偏最小二乘(partial least squares,PLS)法对表面温度与光谱特性关系定量拟合并校准,拟合模型线性相关性拟合度指标均大于0.99。BP-ANN拟合模型的拟合偏差更小,其均方根误差(root mean squared error,RMSE)为2.582,正确率为98.3%。该方法为物体瞬态温度测量提供了一种有效手段,对功率器件焊接界面健康状态的评估给予了有力支撑。
