For the two newly launched satellites(PRN number 27 and 28) of the future global BeiDou navigation satellite system(BDS-3), there is no available broadcast ephemeris data and other initial orbit information, but the i...For the two newly launched satellites(PRN number 27 and 28) of the future global BeiDou navigation satellite system(BDS-3), there is no available broadcast ephemeris data and other initial orbit information, but the initial orbit is the fundamental of the comprehensive analysis of the satellites and their signals. Precise orbit determination(POD) also requires determination of a priori initial value with a certain precision in order to avoid problems such as filter divergence during POD. Compared with the Newton iteration method, which relies on the initial value, this study utilizes the Bancroft algorithm to directly solve the nonlinear equations with the advantage of numerical stability. The initial orbits of these two satellites are calculated based on new code signals, and their results are analyzed and discussed. The experimental results show that, with the exception of very few epochs, when the new code signal is utilized, the median and robust variance factor of the observed residuals computed using pseudo-range observations and the solved initial orbits are less than 4 and 2 m, respectively. It also shows that this solution can be used for rapid initial orbit recovery after maneuvers of the new BeiDou satellites.展开更多
The HY-2 satellite carrying a satellite-borne GPS receiver is the first Chinese radar altimeter satellite, whose radial orbit determination precision must reach the centimeter level. Now HY-2 is in the test phase so t...The HY-2 satellite carrying a satellite-borne GPS receiver is the first Chinese radar altimeter satellite, whose radial orbit determination precision must reach the centimeter level. Now HY-2 is in the test phase so that the observations are not openly released. In order to study the precise orbit determination precision and procedure for HY-2 based on the satellite- borne GPS technique, the satellite-borne GPS data are simulated in this paper. The HY-2 satellite-borne GPS antenna can receive at least seven GPS satellites each epoch, which can validate the GPS receiver and antenna design. What＇s more, the precise orbit determination processing flow is given and precise orbit determination experiments are conducted using the HY-2-borne GPS data with both the reduced-dynamic method and the kinematic geometry method. With the 1 and 3 mm phase data random errors, the radial orbit determination precision can achieve the centimeter level using these two methods and the kinematic orbit accuracy is slightly lower than that of the reduced-dynamic orbit. The earth gravity field model is an important factor which seriously affects the precise orbit determination of altimeter satellites. The reduced-dynamic orbit determination experiments are made with different earth gravity field models, such as EIGEN2, EGM96, TEG4, and GEMT3. Using a large number of high precision satellite-bome GPS data, the HY-2 precise orbit determination can reach the centimeter level with commonly used earth gravity field models up to above 50 degrees and orders.展开更多
The precision orbit determination of challenging minisatellite payload(CHAMP) satellite was done based on position and navigation data analyst(PANDA) software which is developed in Wuhan University, using the onboard ...The precision orbit determination of challenging minisatellite payload(CHAMP) satellite was done based on position and navigation data analyst(PANDA) software which is developed in Wuhan University, using the onboard GPS data of year 2002 from day 126 to 131. The orbit accuracy was assessed by analyzing the difference from GFZ post-processed science orbits (PSO), the GPS carrier and pseudo-range data residuals and the satellite laser ranging (SLR) residuals.展开更多
The fuzzy integration evaluation method （FIEM） is studied in order to select the best orbital elements from the multi-group initial orbits determined by a satellite TT＆C （Tracking, Telemetry and Control） center w...The fuzzy integration evaluation method （FIEM） is studied in order to select the best orbital elements from the multi-group initial orbits determined by a satellite TT＆C （Tracking, Telemetry and Control） center with all kinds of data sources. By employing FIEM together with the experience of TT＆C experts, the index system to evaluate the selection of the best initial orbits is established after the data sources and orbit determination theories are studied. Besides, the concrete steps in employing the method are presented. Moreover, by taking the objects to be evaluated as evaluation experts, the problem of how to generate evaluation matrices is solved. Through practical application, the method to select the best initial orbital elements has been proved to be flexible and effective The originality of the method is to find a new evaluation criterion （comparing the actually tracked orbits） replacing the traditional one （comparing the nominal orbits） for selecting the best orbital elements.展开更多
Autonomous navigation of navigation satellite is discussed. The method of auto-orbit determination using the erosslink range and orientation parameters constraining is put forward. On the basis of the analysis of its ...Autonomous navigation of navigation satellite is discussed. The method of auto-orbit determination using the erosslink range and orientation parameters constraining is put forward. On the basis of the analysis of its feasibility, some useful conclusions are given.展开更多
In the study, position and velocity values of a geostationary satellite are found. When performing this, a MATLAB algorithm is used for Runge-Kutta Fehlberg orbit integration method to solve spacecraft’s position and...In the study, position and velocity values of a geostationary satellite are found. When performing this, a MATLAB algorithm is used for Runge-Kutta Fehlberg orbit integration method to solve spacecraft’s position and velocity. Integrated method is the solution for the systems which mainly work with a single station. Method provides calculation of azimuth, elevation and range data by using the position simulation results found by RKF. Errors of orbit determination are analysed. Variances of orbit parameters are chosen as the accuracy criteria. Analysis results are the indicator of the method’s展开更多
Global navigation satellite system occultation sounder (GNOS) Fengyun-3C was launched successfully on September 23, 2013, which carried GPS/BDS receiver for the first time. This provides the convenience to study the e...Global navigation satellite system occultation sounder (GNOS) Fengyun-3C was launched successfully on September 23, 2013, which carried GPS/BDS receiver for the first time. This provides the convenience to study the enhancement results of low earth orbiter satellite (LEO) to BDS precise orbit determination (POD). First the data characteristic and code observation noise of GNOS are analyzed. Then the enhancement experiments in the case of global and regional ground observation stations layout are processed with four POD schemes: BDS single system, GPS/BDS double system, BDS single system with GNOS observations, GPS/BDS double system with GNOS observations. The precision of BDS orbits and clocks are compared via overlapping arcs. Results show that in the case of global station layout the along directional precision of GEO satellite has the biggest improvement, with the improvement percentage 60%. Then the precision of cross direction and the along direction of remaining satellites shows the second biggest improvement. The orbit precision of BDS-only POD in part of observation arcs some satellite even suffers a slight decline. The root mean square (RMS) of overlapping clock difference of visible arcs in GPS/BDS POD experiments improves by 0.1 ns level. As to the experiments of regional station layout with 7 ground stations, the orbit and clock overlapping precision and orbit predicting precision are analyzed. Results show that the predicting precision of BDS GEO satellites in the along direction improves by 85%. The remaining also has a substantial improvement, with the average percentage 21.7%. RMS of overlapping clock difference of visible arcs improves by 0.5 ns level.展开更多
The analysis centers of the Multi-GNSS Pilot Project of the International GNSS Service provide orbit and clock products for the global navigation satellite systems(GNSSs)Global Positioning System(GPS),GLONASS,Galileo,...The analysis centers of the Multi-GNSS Pilot Project of the International GNSS Service provide orbit and clock products for the global navigation satellite systems(GNSSs)Global Positioning System(GPS),GLONASS,Galileo,and BeiDou,as well as for the Japanese regional Quasi-Zenith Satellite System(QZSS).Due to improved solar radiation pressure modeling and other more sophisticated models,the consistency of these products has improved in recent years.The current orbit consistency between different analysis centers is on the level of a few centimeters for GPS,around one decimeter for GLONASS and Galileo,a few decimeters for BeiDou-2,and several decimeters for QZSS.The clock consistency is about 2 cm for GPS,5 cm for GLONASS and Galileo,and 10 cm for BeiDou-2.In terms of carrier phase modeling error for precise point positioning,the various products exhibit consistencies of 2–3 cm for GPS,6–14 cm for GLONASS,3–10 cm for Galileo,and 10–17 cm for BeiDou-2.展开更多
Spaceborne global navigation satellite system(GNSS)has significantly revolutionized the development of autonomous orbit determination techniques for low Earth orbit satellites for decades.Using a state-of-the-art comb...Spaceborne global navigation satellite system(GNSS)has significantly revolutionized the development of autonomous orbit determination techniques for low Earth orbit satellites for decades.Using a state-of-the-art combination of GNSS observations and satellite dynamics,the absolute orbit determination for a single satellite reached a precision of 1 cm.Relative orbit determination(i.e.,precise baseline determination)for the dual satellites reached a precision of 1 mm.This paper reviews the recent advancements in GNSS products,observation processing,satellite gravitational and non-gravitational force modeling,and precise orbit determination methods.These key aspects have increased the precision of the orbit determination to fulfill the requirements of various scientific objectives.Finally,recommendations are made to further investigate multi-GNSS combinations,satellite high-fidelity geometric models,geometric offset calibration,and comprehensive orbit determination strategies for satellite constellations.展开更多
An algorithm for robust initial orbit determination (IOD) under perturbed orbital dynamics is presented. By leveraging map inversion techniques defined in the algebra of Taylor polynomials, this tool returns a highly ...An algorithm for robust initial orbit determination (IOD) under perturbed orbital dynamics is presented. By leveraging map inversion techniques defined in the algebra of Taylor polynomials, this tool returns a highly accurate solution to the IOD problem and estimates a range centered on the aforementioned solution in which the true orbit should lie. To meet the specified accuracy requirements, automatic domain splitting is used to wrap the IOD routines and ensure that the local truncation error, introduced by a polynomial representation of the state estimate, remains below a predefined threshold. The algorithm is presented for three types of ground-based sensors, namely range radars, Doppler-only radars, and optical telescopes, by considering their different constraints in terms of available measurements and sensor noise. Finally, the improvement in performance with respect to a Keplerian-based IOD solution is demonstrated using large-scale numerical simulations over a subset of tracked objects in low Earth orbit.展开更多
High-precision Global Navigation Satellite System(GNSS)orbit and clock products are crucial for precise applications.An evenly distributed global network enables continuous tracking for GNSS satellites,while a regiona...High-precision Global Navigation Satellite System(GNSS)orbit and clock products are crucial for precise applications.An evenly distributed global network enables continuous tracking for GNSS satellites,while a regional network may result in tracking gaps in the areas where monitoring stations are not deployed.This also means that the orbit determination accuracy based on a regional network is not comparable to that with a global network.Integrating the measurements from regional ground stations and Low Earth Orbit(LEO)satellites onboard receivers is a potential approach for generating GNSS orbit and clock products with centimeter-level accuracy,which is particularly important for BDS and the local commercial providers relying on a regional network.In the integrated Precise Orbit Determination(POD),LEO satellites are used to compensate for the drawback of regional ground stations in the precise orbit and clock determination of GNSS satellites.To validate the role of LEO satellites in the orbit determination with a regional network,6 International GNSS Service stations around China and 13 LEO satellites from January 20 to 26,2019,including GRACE-C/D,SWARM-A/B/C,Jason-3,Sentinel-3A/B,and SAT-A/B/C/D/E are selected in this study to perform the integrated POD.The orbit and clock accuracies of GPS and LEO satellites are evaluated by comparison with precise products.The average Root Mean Square(RMS)of GPS orbit errors in the radial(R),along-track(T)and cross-track(N)directions are 2.27 cm,3.45 cm,and 3.08 cm,respectively,and the clock accuracy is better than 0.15 ns based on a comparison with the final products provided by Center for Orbit Determination in Europe(CODE).The LEO orbit accuracy is better than 2 cm in the R direction,and the position errors are mostly within 4 cm.The results indicate that the integrated POD can generate high-precision orbit and clock products for GPS and LEO satellites based on regional network stations.Finally,the integrated POD products are assessed for Precise Point Positioning(PPP).Simulated kinematic PPP has a comparable performance in terms of the convergence time and positioning accuracy.With more LEO satellites available,the orbit and clock determination accuracy and PPP positioning accuracy can be improved.展开更多
The quality of the satellite orbit determination is rested on the knowledge of per-turbing forces acting on the satellite and stochastic properties of the observations, and the ability of controlling various kinds of ...The quality of the satellite orbit determination is rested on the knowledge of per-turbing forces acting on the satellite and stochastic properties of the observations, and the ability of controlling various kinds of errors. After a brief discussion on the dynamic and geometric orbit determinations, Sage adaptive filtering and robust filtering are reviewed. A new synthetically adaptive robust filtering based on a combination of robust filtering and Sage filtering is devel-oped.It is shown, by derivations and calculations, that the synthetically adaptive robust filtering for orbit determination is not only robust but also simple in calculation. It controls the effects of the outliers of tracking observations and the satellite dynamical disturbance on the parameter esti-mates of the satellite orbit.展开更多
The original idea of a new method for determination of satellite orbits by transfer is from Two-Way Satellite Time and Frequency Transfer (TWSTFT). The original method is called "determination of satellite orbit ...The original idea of a new method for determination of satellite orbits by transfer is from Two-Way Satellite Time and Frequency Transfer (TWSTFT). The original method is called "determination of satellite orbit by transfer". The method is not only for determination of satellite orbit but also for the time transfer with high accuracy and precision. The advantage is that the accuracy and the precision for determination of satellite orbit are very high and the new method is favorable for various applications. The combination of various signals disseminated and received forms various modes of satellite orbit determinations. If receivers at stations receive the own station-disseminated signals via a satellite transponder, it forms an orbit determination mode called "receiving the own station-disseminated signals mode". If receivers at all stations receive the signals disseminated from the master station via satellite transponders, it forms an orbit determination mode called "receiving the master station-disseminated signals mode". If all of receivers at stations receive all stations-disseminated signals via satellite transponders, it forms an orbit determination mode called "receiving all stations-disseminated signals mode". Also there are other combinations of signals for satellite orbit determination. For dif- ferent orbit determination modes with different signal combinations, their rigorous formulae of proc- essing are hereby presented in this paper. The accurate and the precise satellite orbit determination for both of the modes, "receiving the own station-disseminated signals mode" and "receiving the master station-disseminated signals mode" is attempted. It shows that the accuracy and precision for both of modes are nearly the same, the ranging accuracy is better than 1 cm, and the observation residuals of satellite orbit determination are better than 9 cm in the observation duration of 1 day.展开更多
Wheel-off-loadings and orbital maneuvers of the GEO satellite result in additional accelerations to the satellite itself. Complex and difficult to model, these time varying accelerations are an important error source ...Wheel-off-loadings and orbital maneuvers of the GEO satellite result in additional accelerations to the satellite itself. Complex and difficult to model, these time varying accelerations are an important error source of precise orbit determination (POD). In most POD practices, only non-maneuver orbital arcs are treated. However, for some applications such as satellite navigation RDSS services, uninterrupted orbital ephemeris is demanded, requiring the development of POD strategies to be processed both during and after an orbital maneuver. We in this paper study the POD for a maneuvered GEO satellite, using high precision and high sampling rate ranging data obtained with Chinese Area Positioning System (CAPS). The strategy of long arc POD including maneuver arcs is studied by using telemetry data to model the maneuver thrust process. Combining the thrust and other orbital perturbations, a long arc of 6 days’ CAPS ranging data is analyzed. If the telemetry data are not available or contain significant errors, attempts are made to estimate thrusting parameters using CAPS ranging data in the POD as an alternative to properly account for the maneuver. Two strategies achieve reasonably good data fitting level in the tested arc with the maximal position difference being about 20 m.展开更多
Geostationary satellites(GEOs) play a significant role in the regional satellite navigation system.Simulation experiments show that the clock corrections could be mitigated through a single strategy or double differen...Geostationary satellites(GEOs) play a significant role in the regional satellite navigation system.Simulation experiments show that the clock corrections could be mitigated through a single strategy or double differencing strategies for a navigation constellation,but for the mode of individual GEO orbit determination,high precision orbit and clock correction could not be obtained in the orbit determination based on the pseudorange data.A new GEO combined precise orbit determination(POD) strategy is studied in this paper,which combines pseudorange data and C-band transfer ranging data.This strategy overcomes the deficiency of C-band transfer ranging caused by limited stations and tracking time available.With the combination of transfer ranging and pseudorange data,clock corrections between the GEO and the stations can be estimated simultaneously along with orbital parameters,maintaining self-consistency between the satellite ephemeris and clock correction parameters.The error covariance analysis is conducted to illuminate the contributions from the transfer ranging data and the psudoranging data.Using data collected for a Chinese GEO satellite with 3 C-band transfer ranging stations and 4 L-band pseudorange tracking stations,POD experiments indicate that a meter-level accuracy is achievable.The root-mean-square(RMS) of the post-fit C-band ranging data is about 0.203 m,and the RMS of the post-fit pseudorange is 0.408 m.Radial component errors of the POD experiments are independently evaluated with the satellite laser ranging(SLR) data from a station in Beijing,with the residual RMS of 0.076 m.The SLR evaluation also suggests that for 2-h orbital predication,the predicted radial error is about 0.404 m,and the clock correction error is about 1.38 ns.Even for the combination of one C-band transfer ranging station and 4 pseudorange stations,POD is able to achieve a reasonable accuracy with the radial error of 0.280 m and the 2-h predicted radial error of 0.888 m.Clock synchronization between the GEO and tracking stations is achieved with an estimated accuracy of about 1.55 ns,meeting the navigation service requirements.展开更多
China’s COMPASS satellite navigation system consists of five or more geostationary (GEO) satellites.The roles of GEO satellites are to improve the regional user’s positioning accuracy and provide the continuous Radi...China’s COMPASS satellite navigation system consists of five or more geostationary (GEO) satellites.The roles of GEO satellites are to improve the regional user’s positioning accuracy and provide the continuous Radio Determination Satellite Service.The motion of GEO satellites relative to a ground tracking station is almost fixed,and regular orbit maneuvers are necessary to maintain the satellites’ allocated positions above the equator.These features present difficulties in precise orbit determination (POD).C-band ranging via onboard transponders and the L-band pseudo-ranging technique have been used in the COMPASS system.This paper introduces VLBI tracking,which has been successfully employed in the Chinese lunar exploration programs Chang’E-1 and Chang’E-2,to the POD of GEO satellites.In contrast to ranging,which measures distances between a GEO satellite and an observer,VLBI is an angular measurement technique that constrains the satellite’s position errors perpendicular to the satellite-to-observer direction.As a demonstration,the Chinese VLBI Network organized a tracking and orbit-determination experiment for a GEO navigation satellite lasting 24 h.This paper uses the VLBI delay and delay-rate data,in combination with C-band ranging data,to determine the GEO satellite’s orbit.The accuracies of the VLBI delay and delay rate data are about 3.6 ns and 0.4 ps/s,respectively.Data analysis shows that the VLBI data are able to calibrate systematic errors of the C-band ranging data,and the combination of the two observations improves orbit prediction accuracy with short-arc data,which is important for orbital recovery after maneuvers of GEO satellites.With the implementation of VLBI2010,it is possible for VLBI to be applied in the COMPASS satellite navigation system.展开更多
基金supported by the Collaborative Precision Positioning Project funded by the Ministry of Science and Technology of China (No.2016YFB0501900)China Natural Science Funds (No.41231064,41674022,41574015)
文摘For the two newly launched satellites(PRN number 27 and 28) of the future global BeiDou navigation satellite system(BDS-3), there is no available broadcast ephemeris data and other initial orbit information, but the initial orbit is the fundamental of the comprehensive analysis of the satellites and their signals. Precise orbit determination(POD) also requires determination of a priori initial value with a certain precision in order to avoid problems such as filter divergence during POD. Compared with the Newton iteration method, which relies on the initial value, this study utilizes the Bancroft algorithm to directly solve the nonlinear equations with the advantage of numerical stability. The initial orbits of these two satellites are calculated based on new code signals, and their results are analyzed and discussed. The experimental results show that, with the exception of very few epochs, when the new code signal is utilized, the median and robust variance factor of the observed residuals computed using pseudo-range observations and the solved initial orbits are less than 4 and 2 m, respectively. It also shows that this solution can be used for rapid initial orbit recovery after maneuvers of the new BeiDou satellites.
基金supported partially by the National Natural Science Foundation of China (Nos. 40974004 and 40974016)Key Laboratory of Dynamic Geodesy of CAS, China (No. L09-01) R&I Team Support Program and the Graduate Science and Technology Foundation of SDUST, China (No. YCA110403)
文摘The HY-2 satellite carrying a satellite-borne GPS receiver is the first Chinese radar altimeter satellite, whose radial orbit determination precision must reach the centimeter level. Now HY-2 is in the test phase so that the observations are not openly released. In order to study the precise orbit determination precision and procedure for HY-2 based on the satellite- borne GPS technique, the satellite-borne GPS data are simulated in this paper. The HY-2 satellite-borne GPS antenna can receive at least seven GPS satellites each epoch, which can validate the GPS receiver and antenna design. What＇s more, the precise orbit determination processing flow is given and precise orbit determination experiments are conducted using the HY-2-borne GPS data with both the reduced-dynamic method and the kinematic geometry method. With the 1 and 3 mm phase data random errors, the radial orbit determination precision can achieve the centimeter level using these two methods and the kinematic orbit accuracy is slightly lower than that of the reduced-dynamic orbit. The earth gravity field model is an important factor which seriously affects the precise orbit determination of altimeter satellites. The reduced-dynamic orbit determination experiments are made with different earth gravity field models, such as EIGEN2, EGM96, TEG4, and GEMT3. Using a large number of high precision satellite-bome GPS data, the HY-2 precise orbit determination can reach the centimeter level with commonly used earth gravity field models up to above 50 degrees and orders.
文摘The precision orbit determination of challenging minisatellite payload(CHAMP) satellite was done based on position and navigation data analyst(PANDA) software which is developed in Wuhan University, using the onboard GPS data of year 2002 from day 126 to 131. The orbit accuracy was assessed by analyzing the difference from GFZ post-processed science orbits (PSO), the GPS carrier and pseudo-range data residuals and the satellite laser ranging (SLR) residuals.
基金This project was supported by the Evaluate Quality of Satellite TT&C Mission(C0112)
文摘The fuzzy integration evaluation method （FIEM） is studied in order to select the best orbital elements from the multi-group initial orbits determined by a satellite TT＆C （Tracking, Telemetry and Control） center with all kinds of data sources. By employing FIEM together with the experience of TT＆C experts, the index system to evaluate the selection of the best initial orbits is established after the data sources and orbit determination theories are studied. Besides, the concrete steps in employing the method are presented. Moreover, by taking the objects to be evaluated as evaluation experts, the problem of how to generate evaluation matrices is solved. Through practical application, the method to select the best initial orbital elements has been proved to be flexible and effective The originality of the method is to find a new evaluation criterion （comparing the actually tracked orbits） replacing the traditional one （comparing the nominal orbits） for selecting the best orbital elements.
文摘Autonomous navigation of navigation satellite is discussed. The method of auto-orbit determination using the erosslink range and orientation parameters constraining is put forward. On the basis of the analysis of its feasibility, some useful conclusions are given.
文摘In the study, position and velocity values of a geostationary satellite are found. When performing this, a MATLAB algorithm is used for Runge-Kutta Fehlberg orbit integration method to solve spacecraft’s position and velocity. Integrated method is the solution for the systems which mainly work with a single station. Method provides calculation of azimuth, elevation and range data by using the position simulation results found by RKF. Errors of orbit determination are analysed. Variances of orbit parameters are chosen as the accuracy criteria. Analysis results are the indicator of the method’s
基金The National Natural Science Foundation of China (41674016,41274016,41604024).
文摘Global navigation satellite system occultation sounder (GNOS) Fengyun-3C was launched successfully on September 23, 2013, which carried GPS/BDS receiver for the first time. This provides the convenience to study the enhancement results of low earth orbiter satellite (LEO) to BDS precise orbit determination (POD). First the data characteristic and code observation noise of GNOS are analyzed. Then the enhancement experiments in the case of global and regional ground observation stations layout are processed with four POD schemes: BDS single system, GPS/BDS double system, BDS single system with GNOS observations, GPS/BDS double system with GNOS observations. The precision of BDS orbits and clocks are compared via overlapping arcs. Results show that in the case of global station layout the along directional precision of GEO satellite has the biggest improvement, with the improvement percentage 60%. Then the precision of cross direction and the along direction of remaining satellites shows the second biggest improvement. The orbit precision of BDS-only POD in part of observation arcs some satellite even suffers a slight decline. The root mean square (RMS) of overlapping clock difference of visible arcs in GPS/BDS POD experiments improves by 0.1 ns level. As to the experiments of regional station layout with 7 ground stations, the orbit and clock overlapping precision and orbit predicting precision are analyzed. Results show that the predicting precision of BDS GEO satellites in the along direction improves by 85%. The remaining also has a substantial improvement, with the average percentage 21.7%. RMS of overlapping clock difference of visible arcs improves by 0.5 ns level.
基金We would like to acknowledge the efforts of the MGEX station operators,data,and analysis centers,as well as the ILRS for providing SLR normal points.
文摘The analysis centers of the Multi-GNSS Pilot Project of the International GNSS Service provide orbit and clock products for the global navigation satellite systems(GNSSs)Global Positioning System(GPS),GLONASS,Galileo,and BeiDou,as well as for the Japanese regional Quasi-Zenith Satellite System(QZSS).Due to improved solar radiation pressure modeling and other more sophisticated models,the consistency of these products has improved in recent years.The current orbit consistency between different analysis centers is on the level of a few centimeters for GPS,around one decimeter for GLONASS and Galileo,a few decimeters for BeiDou-2,and several decimeters for QZSS.The clock consistency is about 2 cm for GPS,5 cm for GLONASS and Galileo,and 10 cm for BeiDou-2.In terms of carrier phase modeling error for precise point positioning,the various products exhibit consistencies of 2–3 cm for GPS,6–14 cm for GLONASS,3–10 cm for Galileo,and 10–17 cm for BeiDou-2.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant Nos.XDA30010000 and XDA30010300).
文摘Spaceborne global navigation satellite system(GNSS)has significantly revolutionized the development of autonomous orbit determination techniques for low Earth orbit satellites for decades.Using a state-of-the-art combination of GNSS observations and satellite dynamics,the absolute orbit determination for a single satellite reached a precision of 1 cm.Relative orbit determination(i.e.,precise baseline determination)for the dual satellites reached a precision of 1 mm.This paper reviews the recent advancements in GNSS products,observation processing,satellite gravitational and non-gravitational force modeling,and precise orbit determination methods.These key aspects have increased the precision of the orbit determination to fulfill the requirements of various scientific objectives.Finally,recommendations are made to further investigate multi-GNSS combinations,satellite high-fidelity geometric models,geometric offset calibration,and comprehensive orbit determination strategies for satellite constellations.
基金co-funded by the Centre National d’Études Spatiales(CNES)through A.FossàPh.D.program and made use of the CNES orbital propagation tools,including the PACE library.
文摘An algorithm for robust initial orbit determination (IOD) under perturbed orbital dynamics is presented. By leveraging map inversion techniques defined in the algebra of Taylor polynomials, this tool returns a highly accurate solution to the IOD problem and estimates a range centered on the aforementioned solution in which the true orbit should lie. To meet the specified accuracy requirements, automatic domain splitting is used to wrap the IOD routines and ensure that the local truncation error, introduced by a polynomial representation of the state estimate, remains below a predefined threshold. The algorithm is presented for three types of ground-based sensors, namely range radars, Doppler-only radars, and optical telescopes, by considering their different constraints in terms of available measurements and sensor noise. Finally, the improvement in performance with respect to a Keplerian-based IOD solution is demonstrated using large-scale numerical simulations over a subset of tracked objects in low Earth orbit.
基金This research is sponsored by the National Natural Science Foundation of China (Grant No.12103077Grant No.12173072).
文摘High-precision Global Navigation Satellite System(GNSS)orbit and clock products are crucial for precise applications.An evenly distributed global network enables continuous tracking for GNSS satellites,while a regional network may result in tracking gaps in the areas where monitoring stations are not deployed.This also means that the orbit determination accuracy based on a regional network is not comparable to that with a global network.Integrating the measurements from regional ground stations and Low Earth Orbit(LEO)satellites onboard receivers is a potential approach for generating GNSS orbit and clock products with centimeter-level accuracy,which is particularly important for BDS and the local commercial providers relying on a regional network.In the integrated Precise Orbit Determination(POD),LEO satellites are used to compensate for the drawback of regional ground stations in the precise orbit and clock determination of GNSS satellites.To validate the role of LEO satellites in the orbit determination with a regional network,6 International GNSS Service stations around China and 13 LEO satellites from January 20 to 26,2019,including GRACE-C/D,SWARM-A/B/C,Jason-3,Sentinel-3A/B,and SAT-A/B/C/D/E are selected in this study to perform the integrated POD.The orbit and clock accuracies of GPS and LEO satellites are evaluated by comparison with precise products.The average Root Mean Square(RMS)of GPS orbit errors in the radial(R),along-track(T)and cross-track(N)directions are 2.27 cm,3.45 cm,and 3.08 cm,respectively,and the clock accuracy is better than 0.15 ns based on a comparison with the final products provided by Center for Orbit Determination in Europe(CODE).The LEO orbit accuracy is better than 2 cm in the R direction,and the position errors are mostly within 4 cm.The results indicate that the integrated POD can generate high-precision orbit and clock products for GPS and LEO satellites based on regional network stations.Finally,the integrated POD products are assessed for Precise Point Positioning(PPP).Simulated kinematic PPP has a comparable performance in terms of the convergence time and positioning accuracy.With more LEO satellites available,the orbit and clock determination accuracy and PPP positioning accuracy can be improved.
基金This work was supported by the National Natural Science Foundation of China (Grant Nos. 40274002 and 40174009) the National Science Foundation for the Outstanding Youth in China (Grant No. 49825107).
文摘The quality of the satellite orbit determination is rested on the knowledge of per-turbing forces acting on the satellite and stochastic properties of the observations, and the ability of controlling various kinds of errors. After a brief discussion on the dynamic and geometric orbit determinations, Sage adaptive filtering and robust filtering are reviewed. A new synthetically adaptive robust filtering based on a combination of robust filtering and Sage filtering is devel-oped.It is shown, by derivations and calculations, that the synthetically adaptive robust filtering for orbit determination is not only robust but also simple in calculation. It controls the effects of the outliers of tracking observations and the satellite dynamical disturbance on the parameter esti-mates of the satellite orbit.
基金Supported by the National Basic Research and Development Program of China (Grant No. 2007CB815503100453001)
文摘The original idea of a new method for determination of satellite orbits by transfer is from Two-Way Satellite Time and Frequency Transfer (TWSTFT). The original method is called "determination of satellite orbit by transfer". The method is not only for determination of satellite orbit but also for the time transfer with high accuracy and precision. The advantage is that the accuracy and the precision for determination of satellite orbit are very high and the new method is favorable for various applications. The combination of various signals disseminated and received forms various modes of satellite orbit determinations. If receivers at stations receive the own station-disseminated signals via a satellite transponder, it forms an orbit determination mode called "receiving the own station-disseminated signals mode". If receivers at all stations receive the signals disseminated from the master station via satellite transponders, it forms an orbit determination mode called "receiving the master station-disseminated signals mode". If all of receivers at stations receive all stations-disseminated signals via satellite transponders, it forms an orbit determination mode called "receiving all stations-disseminated signals mode". Also there are other combinations of signals for satellite orbit determination. For dif- ferent orbit determination modes with different signal combinations, their rigorous formulae of proc- essing are hereby presented in this paper. The accurate and the precise satellite orbit determination for both of the modes, "receiving the own station-disseminated signals mode" and "receiving the master station-disseminated signals mode" is attempted. It shows that the accuracy and precision for both of modes are nearly the same, the ranging accuracy is better than 1 cm, and the observation residuals of satellite orbit determination are better than 9 cm in the observation duration of 1 day.
基金Supported by the National Natural Science Foundation of China (Grant No. 10703011)the Science & Technology Commission of Shanghai Municipality of China (Grant No. 06DZ22101)
文摘Wheel-off-loadings and orbital maneuvers of the GEO satellite result in additional accelerations to the satellite itself. Complex and difficult to model, these time varying accelerations are an important error source of precise orbit determination (POD). In most POD practices, only non-maneuver orbital arcs are treated. However, for some applications such as satellite navigation RDSS services, uninterrupted orbital ephemeris is demanded, requiring the development of POD strategies to be processed both during and after an orbital maneuver. We in this paper study the POD for a maneuvered GEO satellite, using high precision and high sampling rate ranging data obtained with Chinese Area Positioning System (CAPS). The strategy of long arc POD including maneuver arcs is studied by using telemetry data to model the maneuver thrust process. Combining the thrust and other orbital perturbations, a long arc of 6 days’ CAPS ranging data is analyzed. If the telemetry data are not available or contain significant errors, attempts are made to estimate thrusting parameters using CAPS ranging data in the POD as an alternative to properly account for the maneuver. Two strategies achieve reasonably good data fitting level in the tested arc with the maximal position difference being about 20 m.
基金supported by the National High-Tech Research and Development Program of China (Grant No 2007AA12Z345)Space Navigation and Positioning Technique, Laboratory of Shanghai Municipality (Grant No 06ZD22101)Wuhan University Satellite Navigation and Positioning, Laboratory of the Ministry of Education (Grant No GRC-2009004)
文摘Geostationary satellites(GEOs) play a significant role in the regional satellite navigation system.Simulation experiments show that the clock corrections could be mitigated through a single strategy or double differencing strategies for a navigation constellation,but for the mode of individual GEO orbit determination,high precision orbit and clock correction could not be obtained in the orbit determination based on the pseudorange data.A new GEO combined precise orbit determination(POD) strategy is studied in this paper,which combines pseudorange data and C-band transfer ranging data.This strategy overcomes the deficiency of C-band transfer ranging caused by limited stations and tracking time available.With the combination of transfer ranging and pseudorange data,clock corrections between the GEO and the stations can be estimated simultaneously along with orbital parameters,maintaining self-consistency between the satellite ephemeris and clock correction parameters.The error covariance analysis is conducted to illuminate the contributions from the transfer ranging data and the psudoranging data.Using data collected for a Chinese GEO satellite with 3 C-band transfer ranging stations and 4 L-band pseudorange tracking stations,POD experiments indicate that a meter-level accuracy is achievable.The root-mean-square(RMS) of the post-fit C-band ranging data is about 0.203 m,and the RMS of the post-fit pseudorange is 0.408 m.Radial component errors of the POD experiments are independently evaluated with the satellite laser ranging(SLR) data from a station in Beijing,with the residual RMS of 0.076 m.The SLR evaluation also suggests that for 2-h orbital predication,the predicted radial error is about 0.404 m,and the clock correction error is about 1.38 ns.Even for the combination of one C-band transfer ranging station and 4 pseudorange stations,POD is able to achieve a reasonable accuracy with the radial error of 0.280 m and the 2-h predicted radial error of 0.888 m.Clock synchronization between the GEO and tracking stations is achieved with an estimated accuracy of about 1.55 ns,meeting the navigation service requirements.
基金supported by the National Natural Science Foundation of China (10703011,11073047,11033004)the National High-Tech Research and Development Program of China (2008AA12A209,2008AA12A210)the Science and Technology Commission of Shanghai (06DZ22101)
文摘China’s COMPASS satellite navigation system consists of five or more geostationary (GEO) satellites.The roles of GEO satellites are to improve the regional user’s positioning accuracy and provide the continuous Radio Determination Satellite Service.The motion of GEO satellites relative to a ground tracking station is almost fixed,and regular orbit maneuvers are necessary to maintain the satellites’ allocated positions above the equator.These features present difficulties in precise orbit determination (POD).C-band ranging via onboard transponders and the L-band pseudo-ranging technique have been used in the COMPASS system.This paper introduces VLBI tracking,which has been successfully employed in the Chinese lunar exploration programs Chang’E-1 and Chang’E-2,to the POD of GEO satellites.In contrast to ranging,which measures distances between a GEO satellite and an observer,VLBI is an angular measurement technique that constrains the satellite’s position errors perpendicular to the satellite-to-observer direction.As a demonstration,the Chinese VLBI Network organized a tracking and orbit-determination experiment for a GEO navigation satellite lasting 24 h.This paper uses the VLBI delay and delay-rate data,in combination with C-band ranging data,to determine the GEO satellite’s orbit.The accuracies of the VLBI delay and delay rate data are about 3.6 ns and 0.4 ps/s,respectively.Data analysis shows that the VLBI data are able to calibrate systematic errors of the C-band ranging data,and the combination of the two observations improves orbit prediction accuracy with short-arc data,which is important for orbital recovery after maneuvers of GEO satellites.With the implementation of VLBI2010,it is possible for VLBI to be applied in the COMPASS satellite navigation system.
