This paper addresses the problem of selecting a route for every pair of communicating nodes in a virtual circuit data network in order to minimize the average delay encountered by messages. The problem was previously ...This paper addresses the problem of selecting a route for every pair of communicating nodes in a virtual circuit data network in order to minimize the average delay encountered by messages. The problem was previously modeled as a network of M/M/1 queues. Agenetic algorithm to solve this problem is presented. Extensive computational results across a variety of networks are reported. These results indicate that the presented solution procedure outperforms the other methods in the literature and is effective for a wide range of traffic loads.展开更多
The data-driven fault diagnosis methods can improve the reliability of analog circuits by using the data generated from it. The data have some characteristics, such as randomness and incompleteness, which lead to the ...The data-driven fault diagnosis methods can improve the reliability of analog circuits by using the data generated from it. The data have some characteristics, such as randomness and incompleteness, which lead to the diagnostic results being sensitive to the specific values and random noise. This paper presents a data-driven fault diagnosis method for analog circuits based on the robust competitive agglomeration （RCA）, which can alleviate the incompleteness of the data by clustering with the competing process. And the robustness of the diagnostic results is enhanced by using the approach of robust statistics in RCA. A series of experiments are provided to demonstrate that RCA can classify the incomplete data with a high accuracy. The experimental results show that RCA is robust for the data needed to be classified as well as the parameters needed to be adjusted. The effectiveness of RCA in practical use is demonstrated by two analog circuits.展开更多
This paper introduced the basic theory and algorithm of the surrogate data method, which proposed a rigorous way to detect the random and seemingly stochastic characteristics in a system. The Gaussian data and the Ros...This paper introduced the basic theory and algorithm of the surrogate data method, which proposed a rigorous way to detect the random and seemingly stochastic characteristics in a system. The Gaussian data and the Rossler data were used to show the availability and effectivity of this method. According to the analysis by this method based on the short-circuiting current signals under the conditions of the same voltage and different wire feed speeds, it is demonstrated that the electrical signals time series exhibit apparently randomness when the welding parameters do not match. However, the electrical signals time series are deterministic when a match is found. The stability of short-circuiting transfer process could be judged exactly by the method of surrogate data.展开更多
处于改建阶段的智能变电站采样模式复杂,继电保护装置难以发现采样回路轻微异常,导致回路隐患暴露时间严重滞后。针对上述问题,分析改建时期智能变电站的采样模式和二次设备配置情况,提出基于同源录波数据比对的继电保护采样回路异常检...处于改建阶段的智能变电站采样模式复杂,继电保护装置难以发现采样回路轻微异常,导致回路隐患暴露时间严重滞后。针对上述问题,分析改建时期智能变电站的采样模式和二次设备配置情况,提出基于同源录波数据比对的继电保护采样回路异常检测方法。首先,利用双向编码器表征(bidirectional encoder representations from transformers,BERT)语言模型与余弦相似度算法,实现同源录波数据的通道匹配。然后,利用重采样技术和曼哈顿距离完成波形的采样频率统一与时域对齐。最后,基于动态时间规整(dynamic time warping,DTW)算法提出改进算法,并结合采样点偏移量共同设置采样回路的异常判据。算例分析表明,该方法可以完成录波数据的同源通道匹配,实现波形的一致性对齐,并且相比于传统DTW算法,改进DTW算法对异常状态识别的灵敏性和准确性更高。根据异常判据能够有效检测继电保护采样回路的异常状态,确保了智能变电站的安全可靠运行。展开更多
This paper presents an analysis and validation by advanced system simulation of compact and low-cost six-port transceivers for future wireless local area networks （WLANs） operating at millimeter-wave frequencies. To...This paper presents an analysis and validation by advanced system simulation of compact and low-cost six-port transceivers for future wireless local area networks （WLANs） operating at millimeter-wave frequencies. To obtain realistic simulation results, a six-port model based on the measurement results of a fabricated V-band hybrid coupler, the core component, is used. A frequency-division multiplexing scheme is used by introducing four quadrature phase-shift keying （QPSK） channels in the wireless communication link. The data rate achieved is about 4 Gbit/s. The operating frequency is in the 60-64 GHz unlicensed band. Bit error rate （BER） results are presented, and a comparison is made between single-carrier and multicarrier architectures. The proposed wireless system can be considered an efficient candidate for millimeter-wave communication systems operating at quasi-optical data rates.展开更多
In this paper we have developed a data logging and monitoring system, we validated the system by comparing the result from it with the existing one and found that the system performs slightly better than the existing ...In this paper we have developed a data logging and monitoring system, we validated the system by comparing the result from it with the existing one and found that the system performs slightly better than the existing work in the same area. This implies that the data logger and monitoring system is good and can be used to monitor solar energy variables even at the comfort of our homes. We fitted a model to the generated data and found that the meteorological variables considered accounted for 99.88% of the power output in the rainy seasons while 0.12% of the variation was not explained due to other factors. Solar panels inclined at an angle of 5° (Tilt) and facing South Pole perform optimally.展开更多
System-on-a-chips with intellectual property cores need a large volume of data for testing. The large volume of test data requires a large testing time and test data memory. Therefore new techniques are needed to opti...System-on-a-chips with intellectual property cores need a large volume of data for testing. The large volume of test data requires a large testing time and test data memory. Therefore new techniques are needed to optimize the test data volume, decrease the testing time, and conquer the ATE memory limitation for SOC designs. This paper presents a new compression method of testing for intellectual property core-based system-on-chip. The proposed method is based on new split- data variable length (SDV) codes that are designed using the split-options along with identification bits in a string of test data. This paper analyses the reduction of test data volume, testing time, run time, size of memory required in ATE and improvement of compression ratio. Experimental results for ISCAS 85 and ISCAS 89 Benchmark circuits show that SDV codes outperform other compression methods with the best compression ratio for test data compression. The decompression architecture for SDV codes is also presented for decoding the implementations of compressed bits. The proposed scheme shows that SDV codes are accessible to any of the variations in the input test data stream.展开更多
文摘This paper addresses the problem of selecting a route for every pair of communicating nodes in a virtual circuit data network in order to minimize the average delay encountered by messages. The problem was previously modeled as a network of M/M/1 queues. Agenetic algorithm to solve this problem is presented. Extensive computational results across a variety of networks are reported. These results indicate that the presented solution procedure outperforms the other methods in the literature and is effective for a wide range of traffic loads.
基金supported by the National Natural Science Foundation of China (61202078 61071139)the National High Technology Research and Development Program of China (863 Program)(SQ2011AA110101)
文摘The data-driven fault diagnosis methods can improve the reliability of analog circuits by using the data generated from it. The data have some characteristics, such as randomness and incompleteness, which lead to the diagnostic results being sensitive to the specific values and random noise. This paper presents a data-driven fault diagnosis method for analog circuits based on the robust competitive agglomeration （RCA）, which can alleviate the incompleteness of the data by clustering with the competing process. And the robustness of the diagnostic results is enhanced by using the approach of robust statistics in RCA. A series of experiments are provided to demonstrate that RCA can classify the incomplete data with a high accuracy. The experimental results show that RCA is robust for the data needed to be classified as well as the parameters needed to be adjusted. The effectiveness of RCA in practical use is demonstrated by two analog circuits.
基金supported by the Young Scientists Fund of the National Natural Science Foundation of China(Grant No.51205283)
文摘This paper introduced the basic theory and algorithm of the surrogate data method, which proposed a rigorous way to detect the random and seemingly stochastic characteristics in a system. The Gaussian data and the Rossler data were used to show the availability and effectivity of this method. According to the analysis by this method based on the short-circuiting current signals under the conditions of the same voltage and different wire feed speeds, it is demonstrated that the electrical signals time series exhibit apparently randomness when the welding parameters do not match. However, the electrical signals time series are deterministic when a match is found. The stability of short-circuiting transfer process could be judged exactly by the method of surrogate data.
文摘处于改建阶段的智能变电站采样模式复杂,继电保护装置难以发现采样回路轻微异常,导致回路隐患暴露时间严重滞后。针对上述问题,分析改建时期智能变电站的采样模式和二次设备配置情况,提出基于同源录波数据比对的继电保护采样回路异常检测方法。首先,利用双向编码器表征(bidirectional encoder representations from transformers,BERT)语言模型与余弦相似度算法,实现同源录波数据的通道匹配。然后,利用重采样技术和曼哈顿距离完成波形的采样频率统一与时域对齐。最后,基于动态时间规整(dynamic time warping,DTW)算法提出改进算法,并结合采样点偏移量共同设置采样回路的异常判据。算例分析表明,该方法可以完成录波数据的同源通道匹配,实现波形的一致性对齐,并且相比于传统DTW算法,改进DTW算法对异常状态识别的灵敏性和准确性更高。根据异常判据能够有效检测继电保护采样回路的异常状态,确保了智能变电站的安全可靠运行。
文摘This paper presents an analysis and validation by advanced system simulation of compact and low-cost six-port transceivers for future wireless local area networks （WLANs） operating at millimeter-wave frequencies. To obtain realistic simulation results, a six-port model based on the measurement results of a fabricated V-band hybrid coupler, the core component, is used. A frequency-division multiplexing scheme is used by introducing four quadrature phase-shift keying （QPSK） channels in the wireless communication link. The data rate achieved is about 4 Gbit/s. The operating frequency is in the 60-64 GHz unlicensed band. Bit error rate （BER） results are presented, and a comparison is made between single-carrier and multicarrier architectures. The proposed wireless system can be considered an efficient candidate for millimeter-wave communication systems operating at quasi-optical data rates.
文摘In this paper we have developed a data logging and monitoring system, we validated the system by comparing the result from it with the existing one and found that the system performs slightly better than the existing work in the same area. This implies that the data logger and monitoring system is good and can be used to monitor solar energy variables even at the comfort of our homes. We fitted a model to the generated data and found that the meteorological variables considered accounted for 99.88% of the power output in the rainy seasons while 0.12% of the variation was not explained due to other factors. Solar panels inclined at an angle of 5° (Tilt) and facing South Pole perform optimally.
文摘System-on-a-chips with intellectual property cores need a large volume of data for testing. The large volume of test data requires a large testing time and test data memory. Therefore new techniques are needed to optimize the test data volume, decrease the testing time, and conquer the ATE memory limitation for SOC designs. This paper presents a new compression method of testing for intellectual property core-based system-on-chip. The proposed method is based on new split- data variable length (SDV) codes that are designed using the split-options along with identification bits in a string of test data. This paper analyses the reduction of test data volume, testing time, run time, size of memory required in ATE and improvement of compression ratio. Experimental results for ISCAS 85 and ISCAS 89 Benchmark circuits show that SDV codes outperform other compression methods with the best compression ratio for test data compression. The decompression architecture for SDV codes is also presented for decoding the implementations of compressed bits. The proposed scheme shows that SDV codes are accessible to any of the variations in the input test data stream.
