Three kinds of coplanar waveguides （CPWs） are designed and fabricated on different silicon substrates---common low-resistivity silicon substrate （LRS）, LRS with a 3μm-thick silicon oxide interlayer, and high-resi...Three kinds of coplanar waveguides （CPWs） are designed and fabricated on different silicon substrates---common low-resistivity silicon substrate （LRS）, LRS with a 3μm-thick silicon oxide interlayer, and high-resistivity silicon （HRS） substrate. The results show that the microwave loss of a CPW on LRS is too high to be used, but it can be greatly reduced by adding a thick interlayer of silicon oxide between the CPW transmission lines and the LRS.A CPW directly on HRS shows a loss lower than 2dB/cm in the range of 0-26GHz and the process is simple,so HRS is a more suitable CPW substrate.展开更多
In order to broaden the bandwidth of a tapered slot- line antenna （TSA）, a bilateral tapered slot-line antenna （BTSA） with a new feeding structure of coplanar waveguide （CPW） is developed. Based on the fact that...In order to broaden the bandwidth of a tapered slot- line antenna （TSA）, a bilateral tapered slot-line antenna （BTSA） with a new feeding structure of coplanar waveguide （CPW） is developed. Based on the fact that the bandwidth limitation of TSA mainly depends on its feeding structure, an improved CPW-based feed structure etched on the backboard of the BTSA is adopted to perform traveling-wave transition. Both the simulation results and measurement data verify that the proposed feeding structure results in ＂high-pass＂ frequency response for antenna impedance matching. The voltage standing wave ratio （VSWR） is less than 2：1 when the frequency is higher than 3 GHz. The antenna gain exceeds 7 dBi with good radiation patterns when the bandwidth is from 4 to 16 GHz. This ultra wideband （UWB） antenna with a compact size is specially available for the electronic systems of counter-measure and microwave imaging.展开更多
We discuss the characterization and modeling of coplanar waveguides （CPW） realized in TSMC 0. 13μm CMOS process. EM-field simulations with momentum are performed to estimate the important parameters of the transmis...We discuss the characterization and modeling of coplanar waveguides （CPW） realized in TSMC 0. 13μm CMOS process. EM-field simulations with momentum are performed to estimate the important parameters of the transmission lines, such as characteristic impedance and propagation loss. Coplanar waveguide libraries are designed with Z values of 30,50,70, and 100Ω. Finally, the propagation constant and the characteristic impedance are measured in a frequency range from 0. 1 to 40GHz with a vector-network analyzer,using the short-open-loadthru （SOLT） de-embedding technique. The distributed parameters of the CPWs are extracted from the measured S-parameters.展开更多
In this paper, the authors present an analytical model for coplanar waveguide on silicon-on-insulator substrate. The four-element topological network and the conformal mapping technique are used to analyse the capacit...In this paper, the authors present an analytical model for coplanar waveguide on silicon-on-insulator substrate. The four-element topological network and the conformal mapping technique are used to analyse the capacitance and the conductance of the sandwich substrate. The validity of the model is verified by the full-wave method and the experimental data. It is found that the inductance, the resistance, the capacitance and the conductance from the analytical model show they are in good agreement with the corresponding values extracted from experimental Sparameter until 10 GHz.展开更多
The characteristics of a conventional LiNbO3 intensity modulator made up of a Mach-Zehnder(MZ) type annealed proton exchange(APE) waveguide and coplanar waveguide(CPW) modulation electrode are presented. The APE waveg...The characteristics of a conventional LiNbO3 intensity modulator made up of a Mach-Zehnder(MZ) type annealed proton exchange(APE) waveguide and coplanar waveguide(CPW) modulation electrode are presented. The APE waveguide characteristics and their relations with process parameters are analyzed. At the same time, the electrical characteristics of modulation electrode, such as modulation voltage, microwave effective index associated with modulation bandwidth, characteristics impedance, are also investigated in detail.展开更多
This paper proposes an antenna design concept to achieve a multi-reconfigurable band-notch antenna by using a set of microswitches. The proposed idea was proved by the design of the coplanar waveguide(CPW)-fed slot an...This paper proposes an antenna design concept to achieve a multi-reconfigurable band-notch antenna by using a set of microswitches. The proposed idea was proved by the design of the coplanar waveguide(CPW)-fed slot antenna. The sample design gives a wideband antenna the impedance bandwidth of which covers the frequency ranged from 1.9 GHz to 6.55 GHz.The antenna could be configured to work either in single-band mode or in one of the defined dual-band modes.展开更多
In this paper we propose a two-pole varactor-tuned superconducting filter using coplanar waveguide （CPW） spiralin-spiral-out （SISO） resonators. Novel internal and external coupling structures are introduced to mee...In this paper we propose a two-pole varactor-tuned superconducting filter using coplanar waveguide （CPW） spiralin-spiral-out （SISO） resonators. Novel internal and external coupling structures are introduced to meet the requirements for a tunable filter with a constant absolute bandwidth. The fabricated device has a frequency tuning range of 14.4% at frequencies ranging from 274.1 MHz to 317.7 MHz, a 3-dB bandwidth of 5.14±0.06 MHz, and an insertion loss of 0.08 dB-0.70 dB. The simulated and measured results are in excellent agreement with each other.展开更多
A tunable superconducting half-wavelength coplanar waveguide resonator （CPWR） with Nb parallel nanowires - 300 nm in width embedded in the center conductor was designed, fabricated, and measured. The frequency shift...A tunable superconducting half-wavelength coplanar waveguide resonator （CPWR） with Nb parallel nanowires - 300 nm in width embedded in the center conductor was designed, fabricated, and measured. The frequency shift and the amplitude attenuation of the resonance peak under irradiation of 404-nm pulse laser were observed with different light powers at 4.2 K. The RF power supplied to such a CPWR can serve as current bias, which will affect the light response of the resonator.展开更多
Superconducting coplanar waveguide（CPW） can be widely used as two-dimensional（2 D） resonator, transmission line or feedline, providing an important component for superconducting quantum circuit which is a promisin...Superconducting coplanar waveguide（CPW） can be widely used as two-dimensional（2 D） resonator, transmission line or feedline, providing an important component for superconducting quantum circuit which is a promising candidate for quantum information processing. Due to the discontinuities and asymmetries in the ground planes, CPW usually exhibits the spurious resonance, which is a common source of decoherence in circuit quantum electrodynamics experiments. To mitigate the spurious resonance, we fabricated superconducting aluminum air-bridges on Nb CPW. The fabricated airbridges are approximately 3 m high and up to 120 m long. Compared with other methods, the fabrication procedures of our air-bridges are simpler, and the air-bridge can withstand strong ultrasound.展开更多
In this paper, a novel and simple CPW-fed planar monopole antenna is presented for UWB application. The antenna is fabricated on inexpensive FR4 substrate and fed by 50Ω CPW on the same layer, Measured data show that...In this paper, a novel and simple CPW-fed planar monopole antenna is presented for UWB application. The antenna is fabricated on inexpensive FR4 substrate and fed by 50Ω CPW on the same layer, Measured data show that the antenna provides an impedance bandwidth of about 8GHz for the return loss less than 10dB. It is also observed that the radiation pattems are nearly omni-directional over the entire frequency range. Details of the proposed antenna are presented, and simulated results are presented and discussed.展开更多
In this study, we constructed a 4-element linear array antenna using four 20 GHz band microstrip patch antennas with a structure such that the signal is fed to the patch antennas from open-end coplanar waveguides with...In this study, we constructed a 4-element linear array antenna using four 20 GHz band microstrip patch antennas with a structure such that the signal is fed to the patch antennas from open-end coplanar waveguides without contact. We investigated factors related to the design of linear array patch antennas. To adjust the maximum radiation direction and reduce return loss, we optimized the spacing between the elements and their shape. With an element spacing of 11.50 mm, patch width of 3.90 mm, and patch length of 4.15 mm, we obtained a resonance frequency of 20.05 GHz and a return loss of -29.59 dB at the resonance frequency. However, in the case of a 4-element linear array antenna structure, undesired resonances occurred in frequency bands other than the design resonance frequency band of 20 GHz. To suppress these undesired resonances and obtaining stable operation at the design frequency, we propose a new structure in which the feed line is loaded with a short stub, and show through computer simulations that the occurrence of undesired resonances can be sufficiently suppressed. Furthermore, we demonstrate the problem of radiation gain reduction caused by introducing a short stub, propose a design method for a new structure in which the feed line has slits between the stubs, and show improvement of the antenna gain by 0.5 dBi.展开更多
Addressed is the calculation of millimeter wave attenuation on coplanar waveguide(CPW). A novel conformal wavelet finite-difference time-domain(CWFDTD) algorithm is proposed with emphasis on its application in calcula...Addressed is the calculation of millimeter wave attenuation on coplanar waveguide(CPW). A novel conformal wavelet finite-difference time-domain(CWFDTD) algorithm is proposed with emphasis on its application in calculation of millimeter wave attenuation on CPW, which is the combination of conformal algorithm dealing with the deformed cell with Wavelet-FDTD using multi-resolution analysis(MRA). Derived is the difference formulation for multi-resolution time domain(MRTD) based on Daubechies wavelets, and also given is the stability conditions for wavelet-FDTD algorithm. To validate its accuracy and efficiency, this novel method is applied to calculate the millimeter wave attenuation on lithium niobate CPW. Numerical results demonstrate that this new CWFDTD algorithm has the same accuracy with the conformal finite-difference time-domain(CFDTD) and conformal finite-difference time-domain based on alternating-direction implicit method(ADI-CFDTD), but saves computational time and computer memory.展开更多
文摘Three kinds of coplanar waveguides （CPWs） are designed and fabricated on different silicon substrates---common low-resistivity silicon substrate （LRS）, LRS with a 3μm-thick silicon oxide interlayer, and high-resistivity silicon （HRS） substrate. The results show that the microwave loss of a CPW on LRS is too high to be used, but it can be greatly reduced by adding a thick interlayer of silicon oxide between the CPW transmission lines and the LRS.A CPW directly on HRS shows a loss lower than 2dB/cm in the range of 0-26GHz and the process is simple,so HRS is a more suitable CPW substrate.
基金The National High Technology Research and Development Program of China(863 Program)(No.2007AA01Z264)
文摘In order to broaden the bandwidth of a tapered slot- line antenna （TSA）, a bilateral tapered slot-line antenna （BTSA） with a new feeding structure of coplanar waveguide （CPW） is developed. Based on the fact that the bandwidth limitation of TSA mainly depends on its feeding structure, an improved CPW-based feed structure etched on the backboard of the BTSA is adopted to perform traveling-wave transition. Both the simulation results and measurement data verify that the proposed feeding structure results in ＂high-pass＂ frequency response for antenna impedance matching. The voltage standing wave ratio （VSWR） is less than 2：1 when the frequency is higher than 3 GHz. The antenna gain exceeds 7 dBi with good radiation patterns when the bandwidth is from 4 to 16 GHz. This ultra wideband （UWB） antenna with a compact size is specially available for the electronic systems of counter-measure and microwave imaging.
文摘We discuss the characterization and modeling of coplanar waveguides （CPW） realized in TSMC 0. 13μm CMOS process. EM-field simulations with momentum are performed to estimate the important parameters of the transmission lines, such as characteristic impedance and propagation loss. Coplanar waveguide libraries are designed with Z values of 30,50,70, and 100Ω. Finally, the propagation constant and the characteristic impedance are measured in a frequency range from 0. 1 to 40GHz with a vector-network analyzer,using the short-open-loadthru （SOLT） de-embedding technique. The distributed parameters of the CPWs are extracted from the measured S-parameters.
基金Project supported by the National Natural Science Foundation of China(Grant No.10775166)the Zhejiang Provincial Science Technology Foundation,China(Grant No.2008C31002)
文摘In this paper, the authors present an analytical model for coplanar waveguide on silicon-on-insulator substrate. The four-element topological network and the conformal mapping technique are used to analyse the capacitance and the conductance of the sandwich substrate. The validity of the model is verified by the full-wave method and the experimental data. It is found that the inductance, the resistance, the capacitance and the conductance from the analytical model show they are in good agreement with the corresponding values extracted from experimental Sparameter until 10 GHz.
文摘The characteristics of a conventional LiNbO3 intensity modulator made up of a Mach-Zehnder(MZ) type annealed proton exchange(APE) waveguide and coplanar waveguide(CPW) modulation electrode are presented. The APE waveguide characteristics and their relations with process parameters are analyzed. At the same time, the electrical characteristics of modulation electrode, such as modulation voltage, microwave effective index associated with modulation bandwidth, characteristics impedance, are also investigated in detail.
文摘This paper proposes an antenna design concept to achieve a multi-reconfigurable band-notch antenna by using a set of microswitches. The proposed idea was proved by the design of the coplanar waveguide(CPW)-fed slot antenna. The sample design gives a wideband antenna the impedance bandwidth of which covers the frequency ranged from 1.9 GHz to 6.55 GHz.The antenna could be configured to work either in single-band mode or in one of the defined dual-band modes.
基金supported by the National Natural Science Foundation of China(Grant No.61371009)the National High Technology Research and Development Program of China(Grant No.2014AA032703)
文摘In this paper we propose a two-pole varactor-tuned superconducting filter using coplanar waveguide （CPW） spiralin-spiral-out （SISO） resonators. Novel internal and external coupling structures are introduced to meet the requirements for a tunable filter with a constant absolute bandwidth. The fabricated device has a frequency tuning range of 14.4% at frequencies ranging from 274.1 MHz to 317.7 MHz, a 3-dB bandwidth of 5.14±0.06 MHz, and an insertion loss of 0.08 dB-0.70 dB. The simulated and measured results are in excellent agreement with each other.
基金Project supported by the National Basic Research Program of China(Grant Nos.2011CB922104 and 2011CBA00200)the National Natural Science Foundation of China(Grant No.11474154)+1 种基金the Jiangsu Natural Science Fund for Distinguished Young Scholars(Grant No.BK2012013)a Doctoral Program(Grant No.20120091110030)
文摘A tunable superconducting half-wavelength coplanar waveguide resonator （CPWR） with Nb parallel nanowires - 300 nm in width embedded in the center conductor was designed, fabricated, and measured. The frequency shift and the amplitude attenuation of the resonance peak under irradiation of 404-nm pulse laser were observed with different light powers at 4.2 K. The RF power supplied to such a CPWR can serve as current bias, which will affect the light response of the resonator.
基金Project supported by the National Key Research and Development Program of China(Grant No.2016YFA0301802)the National Natural Science Foundation of China(Grant Nos.11474152,11274156,11504165,and 61521001)
文摘Superconducting coplanar waveguide（CPW） can be widely used as two-dimensional（2 D） resonator, transmission line or feedline, providing an important component for superconducting quantum circuit which is a promising candidate for quantum information processing. Due to the discontinuities and asymmetries in the ground planes, CPW usually exhibits the spurious resonance, which is a common source of decoherence in circuit quantum electrodynamics experiments. To mitigate the spurious resonance, we fabricated superconducting aluminum air-bridges on Nb CPW. The fabricated airbridges are approximately 3 m high and up to 120 m long. Compared with other methods, the fabrication procedures of our air-bridges are simpler, and the air-bridge can withstand strong ultrasound.
文摘In this paper, a novel and simple CPW-fed planar monopole antenna is presented for UWB application. The antenna is fabricated on inexpensive FR4 substrate and fed by 50Ω CPW on the same layer, Measured data show that the antenna provides an impedance bandwidth of about 8GHz for the return loss less than 10dB. It is also observed that the radiation pattems are nearly omni-directional over the entire frequency range. Details of the proposed antenna are presented, and simulated results are presented and discussed.
文摘In this study, we constructed a 4-element linear array antenna using four 20 GHz band microstrip patch antennas with a structure such that the signal is fed to the patch antennas from open-end coplanar waveguides without contact. We investigated factors related to the design of linear array patch antennas. To adjust the maximum radiation direction and reduce return loss, we optimized the spacing between the elements and their shape. With an element spacing of 11.50 mm, patch width of 3.90 mm, and patch length of 4.15 mm, we obtained a resonance frequency of 20.05 GHz and a return loss of -29.59 dB at the resonance frequency. However, in the case of a 4-element linear array antenna structure, undesired resonances occurred in frequency bands other than the design resonance frequency band of 20 GHz. To suppress these undesired resonances and obtaining stable operation at the design frequency, we propose a new structure in which the feed line is loaded with a short stub, and show through computer simulations that the occurrence of undesired resonances can be sufficiently suppressed. Furthermore, we demonstrate the problem of radiation gain reduction caused by introducing a short stub, propose a design method for a new structure in which the feed line has slits between the stubs, and show improvement of the antenna gain by 0.5 dBi.
基金Natural Science Foundation of Hubei Province(2005ABA311)
文摘Addressed is the calculation of millimeter wave attenuation on coplanar waveguide(CPW). A novel conformal wavelet finite-difference time-domain(CWFDTD) algorithm is proposed with emphasis on its application in calculation of millimeter wave attenuation on CPW, which is the combination of conformal algorithm dealing with the deformed cell with Wavelet-FDTD using multi-resolution analysis(MRA). Derived is the difference formulation for multi-resolution time domain(MRTD) based on Daubechies wavelets, and also given is the stability conditions for wavelet-FDTD algorithm. To validate its accuracy and efficiency, this novel method is applied to calculate the millimeter wave attenuation on lithium niobate CPW. Numerical results demonstrate that this new CWFDTD algorithm has the same accuracy with the conformal finite-difference time-domain(CFDTD) and conformal finite-difference time-domain based on alternating-direction implicit method(ADI-CFDTD), but saves computational time and computer memory.
