This work contributed to a detailed study on a better understanding of the Jominy test, adopted a proportion of study to create the Jominy test device, exhibited favorable conceptions for the development of a prototyp...This work contributed to a detailed study on a better understanding of the Jominy test, adopted a proportion of study to create the Jominy test device, exhibited favorable conceptions for the development of a prototype of the device, covering the four aspects of the project, being they: test device, test body heating system, test automation and instrumentation using embedded electronics and financial analysis for the elaboration of this project in Brazil. It was possible to observe in the results that the system is efficient, simple and functional, it was possible to obtain the first test carried out in the controlled environment the temperature data in degrees centigrade, the recorded data were automatically launched in Microsoft Excel by the PLX DAQ software, making the acquisition of the data. In the matter of preparing the test device, the drawings are presented in the 3D modeling software, cost tables of the materials used for assembly in Brazil. In terms of the heating system, a heating system was adopted that uses electromagnetic induction, the cost of materials related to the heating system design was also presented. Another relevant factor that contributes to the research and improvement of the prototype is the municipality, located in the Paraiba Valley region, located in the state of <span style="white-space:nowrap;">São </span>Paulo, consisting of a fertile and relevant scenario of regional, national, international and multinational statistics, thus concluding the effectiveness for the mainly metallurgical industries. The results obtained were satisfactory and consistent, when they were created for the Jominy test device with the ability to submit small pieces for testing and mainly essential in the didactic point of view for a higher education institution of engineering and technology.展开更多
The characteristics of USB data acquisition system NI cDAQ and its control software LabVIEW are briefed.The methods for controlling GDS pressure and volume controller by LabVIEW through serial port communication are p...The characteristics of USB data acquisition system NI cDAQ and its control software LabVIEW are briefed.The methods for controlling GDS pressure and volume controller by LabVIEW through serial port communication are presented.A practical data sharing method among geotechnical testing systems is illustrated.As an application case on a modified conventional soil triaxial testing system, the automatic triaxial testing system is designed by LabVIEW.Based on the control panel, the cell pressure and back pressure can be controlled independently and the testing data can be recorded automatically.展开更多
A data acquisition system for testing gas sensor array response to multi-gas is presented.The testing system is based on the character of the gas response of metal oxide semiconductor gas sensor array.The data acquisi...A data acquisition system for testing gas sensor array response to multi-gas is presented.The testing system is based on the character of the gas response of metal oxide semiconductor gas sensor array.The data acquisition is realized automatically through the real time controlling of the data acquisition card PCI1711.This system is highly attractive for electronic nose,which is a powerful tool for the discrimination of gases.展开更多
A data acquisition system （DAS） to implement high-speed, real-time and multi-channel data acquisition and store is presented. The control of the system is implemented by the combination of complex programable logic ...A data acquisition system （DAS） to implement high-speed, real-time and multi-channel data acquisition and store is presented. The control of the system is implemented by the combination of complex programable logic device （CPLD） and digital signal processing （DSP）, the bulk buffer of the system is implemented by the combination of CPLD, DSP, and synchronous dynamic random access memory （SDRAM）, and the data transfer is implemented by the combination of DSP, first in first out （FIFO）, universal serial bus （USB） and USB hub. The system could not only work independently in single-channel mode, but also implement high-speed real-time multi-channel data acquisition system （MCDAS） by the combination of multiple single-channels. The sampling rate and data storage capacity of each channel could reach up to 100 million sampiing per second and 256 MB respectively.展开更多
At present, with the rapid development of science and technology, based on the requirements of weapon test and identification tasks, the experimental data acquisition and processing space station, which is suitable fo...At present, with the rapid development of science and technology, based on the requirements of weapon test and identification tasks, the experimental data acquisition and processing space station, which is suitable for a variety of extreme natural environments such as alpine, plateau, mountain, jungle, desert, island and reef, has been studied theoretically and in practice. The space station is a dome-shaped structure with scale-shaped modules and basalt reinforced fiber composite materials, providing thermal insulation, ventilation and continuous power supply. It can provide support and guarantee for the real-time monitoring, recovery and information transmission of test data, and meet the basic work and life needs of test personnel.展开更多
This article reports the latest development of a wireless sensing system,named Martlet,on high-g shock acceleration measurement.The Martlet sensing node design is based on a Texas Instruments Piccolo microcontroller,w...This article reports the latest development of a wireless sensing system,named Martlet,on high-g shock acceleration measurement.The Martlet sensing node design is based on a Texas Instruments Piccolo microcontroller,with clock frequency programmable up to 90 MHz.The high clock frequency of the microcontroller enables Martlet to support high-frequency data acquisition and high-speed onboard computation.In addition,the extensible design of the Martlet node conveniently allows incorporation of multiple sensor boards.In this study,a high-g accelerometer interface board is developed to allow Martlet to work with the selected microelectromechanical system(MEMS)high-g accelerometers.Besides low-pass and highpass filters,amplification gains are also implemented on the high-g accelerometer interface board.Laboratory impact experiments are conducted to validate the performance of the Martlet wireless sensing system with the high-g accelerometer board.The results of this study show that the performance of the wireless sensing system is comparable to the cabled system.展开更多
Remote data monitoring system which adopts virtual instrument usually applies data sharing, acquisition and remote transmission technology via internet. It is able to finish concurrent data acquisition and processing ...Remote data monitoring system which adopts virtual instrument usually applies data sharing, acquisition and remote transmission technology via internet. It is able to finish concurrent data acquisition and processing for multi-user and multi-task and also build a personalized virtual testing environment for more people but with fewer instruments. In this paper, we＇ 11 elaborate on the design and implementation of information sharing platform through a typical example of how to build multi-user concurrent virtual testing environment based on the virtnal software LabVIEW.展开更多
This paper presents an automated testing network system for paper laboratory based on CAN bus. The overall architecture, hardware interface and software function are discussed in detail. It is indicated through experi...This paper presents an automated testing network system for paper laboratory based on CAN bus. The overall architecture, hardware interface and software function are discussed in detail. It is indicated through experiment that the system can collect, analyze and store the test results from the various measuring instruments in the paper lab automatically. The simple, reliable, low-cost measuring automation system will have a prosperous application in the future paper industry.展开更多
A test system is developed for the BESIII ETOF/MRPC beam tests of data acquisition, environment monitoring and automatic control. The software framework is based on the CAMAC bus, VME bus and Serial Port,which are res...A test system is developed for the BESIII ETOF/MRPC beam tests of data acquisition, environment monitoring and automatic control. The software framework is based on the CAMAC bus, VME bus and Serial Port,which are responsible for communications with the detectors. The monitor system works well in the beam test.展开更多
The high energy cosmic-radiation detection(HERD)facility is planned to launch in 2027 and scheduled to be installed on the China Space Station.It serves as a dark matter particle detector,a cosmic ray instrument,and a...The high energy cosmic-radiation detection(HERD)facility is planned to launch in 2027 and scheduled to be installed on the China Space Station.It serves as a dark matter particle detector,a cosmic ray instrument,and an observatory for high-energy gamma rays.A transition radiation detector placed on one of its lateral sides serves dual purpose,(ⅰ)calibrating HERD's electromagnetic calorimeter in the TeV energy range,and(ⅱ)serving as an independent detector for high-energy gamma rays.In this paper,the prototype readout electronics design of the transition radiation detector is demonstrated,which aims to accurately measure the charge of the anodes using the SAMPA application specific integrated circuit chip.The electronic performance of the prototype system is evaluated in terms of noise,linearity,and resolution.Through the presented design,each electronic channel can achieve a dynamic range of 0–100 fC,the RMS noise level not exceeding 0.15 fC,and the integral nonlinearity was<0.2%.To further verify the readout electronic performance,a joint test with the detector was carried out,and the results show that the prototype system can satisfy the requirements of the detector's scientific goals.展开更多
文摘This work contributed to a detailed study on a better understanding of the Jominy test, adopted a proportion of study to create the Jominy test device, exhibited favorable conceptions for the development of a prototype of the device, covering the four aspects of the project, being they: test device, test body heating system, test automation and instrumentation using embedded electronics and financial analysis for the elaboration of this project in Brazil. It was possible to observe in the results that the system is efficient, simple and functional, it was possible to obtain the first test carried out in the controlled environment the temperature data in degrees centigrade, the recorded data were automatically launched in Microsoft Excel by the PLX DAQ software, making the acquisition of the data. In the matter of preparing the test device, the drawings are presented in the 3D modeling software, cost tables of the materials used for assembly in Brazil. In terms of the heating system, a heating system was adopted that uses electromagnetic induction, the cost of materials related to the heating system design was also presented. Another relevant factor that contributes to the research and improvement of the prototype is the municipality, located in the Paraiba Valley region, located in the state of <span style="white-space:nowrap;">São </span>Paulo, consisting of a fertile and relevant scenario of regional, national, international and multinational statistics, thus concluding the effectiveness for the mainly metallurgical industries. The results obtained were satisfactory and consistent, when they were created for the Jominy test device with the ability to submit small pieces for testing and mainly essential in the didactic point of view for a higher education institution of engineering and technology.
基金Laboratory and numerical modelling of unsaturated flow in fractured soil and rock (50609012)Fund Proposer: ZHANG Hua.
文摘The characteristics of USB data acquisition system NI cDAQ and its control software LabVIEW are briefed.The methods for controlling GDS pressure and volume controller by LabVIEW through serial port communication are presented.A practical data sharing method among geotechnical testing systems is illustrated.As an application case on a modified conventional soil triaxial testing system, the automatic triaxial testing system is designed by LabVIEW.Based on the control panel, the cell pressure and back pressure can be controlled independently and the testing data can be recorded automatically.
文摘A data acquisition system for testing gas sensor array response to multi-gas is presented.The testing system is based on the character of the gas response of metal oxide semiconductor gas sensor array.The data acquisition is realized automatically through the real time controlling of the data acquisition card PCI1711.This system is highly attractive for electronic nose,which is a powerful tool for the discrimination of gases.
文摘A data acquisition system （DAS） to implement high-speed, real-time and multi-channel data acquisition and store is presented. The control of the system is implemented by the combination of complex programable logic device （CPLD） and digital signal processing （DSP）, the bulk buffer of the system is implemented by the combination of CPLD, DSP, and synchronous dynamic random access memory （SDRAM）, and the data transfer is implemented by the combination of DSP, first in first out （FIFO）, universal serial bus （USB） and USB hub. The system could not only work independently in single-channel mode, but also implement high-speed real-time multi-channel data acquisition system （MCDAS） by the combination of multiple single-channels. The sampling rate and data storage capacity of each channel could reach up to 100 million sampiing per second and 256 MB respectively.
文摘At present, with the rapid development of science and technology, based on the requirements of weapon test and identification tasks, the experimental data acquisition and processing space station, which is suitable for a variety of extreme natural environments such as alpine, plateau, mountain, jungle, desert, island and reef, has been studied theoretically and in practice. The space station is a dome-shaped structure with scale-shaped modules and basalt reinforced fiber composite materials, providing thermal insulation, ventilation and continuous power supply. It can provide support and guarantee for the real-time monitoring, recovery and information transmission of test data, and meet the basic work and life needs of test personnel.
文摘This article reports the latest development of a wireless sensing system,named Martlet,on high-g shock acceleration measurement.The Martlet sensing node design is based on a Texas Instruments Piccolo microcontroller,with clock frequency programmable up to 90 MHz.The high clock frequency of the microcontroller enables Martlet to support high-frequency data acquisition and high-speed onboard computation.In addition,the extensible design of the Martlet node conveniently allows incorporation of multiple sensor boards.In this study,a high-g accelerometer interface board is developed to allow Martlet to work with the selected microelectromechanical system(MEMS)high-g accelerometers.Besides low-pass and highpass filters,amplification gains are also implemented on the high-g accelerometer interface board.Laboratory impact experiments are conducted to validate the performance of the Martlet wireless sensing system with the high-g accelerometer board.The results of this study show that the performance of the wireless sensing system is comparable to the cabled system.
文摘Remote data monitoring system which adopts virtual instrument usually applies data sharing, acquisition and remote transmission technology via internet. It is able to finish concurrent data acquisition and processing for multi-user and multi-task and also build a personalized virtual testing environment for more people but with fewer instruments. In this paper, we＇ 11 elaborate on the design and implementation of information sharing platform through a typical example of how to build multi-user concurrent virtual testing environment based on the virtnal software LabVIEW.
文摘This paper presents an automated testing network system for paper laboratory based on CAN bus. The overall architecture, hardware interface and software function are discussed in detail. It is indicated through experiment that the system can collect, analyze and store the test results from the various measuring instruments in the paper lab automatically. The simple, reliable, low-cost measuring automation system will have a prosperous application in the future paper industry.
基金Supported by the State Key program of National Natural Science of China(No.10979003)National Natural Science Foundation of China(No.10775181)China Postdoctoral Science Foundation(No.20090460521)
文摘A test system is developed for the BESIII ETOF/MRPC beam tests of data acquisition, environment monitoring and automatic control. The software framework is based on the CAMAC bus, VME bus and Serial Port,which are responsible for communications with the detectors. The monitor system works well in the beam test.
基金supported by the National Natural Science Foundation of China(Nos.12375193,11975292,11875304)the CAS“Light of West China”Program+1 种基金the Scientific Instrument Developing Project of the Chinese Academy of Sciences(No.GJJSTD20210009)the CAS Pioneer Hundred Talent Program。
文摘The high energy cosmic-radiation detection(HERD)facility is planned to launch in 2027 and scheduled to be installed on the China Space Station.It serves as a dark matter particle detector,a cosmic ray instrument,and an observatory for high-energy gamma rays.A transition radiation detector placed on one of its lateral sides serves dual purpose,(ⅰ)calibrating HERD's electromagnetic calorimeter in the TeV energy range,and(ⅱ)serving as an independent detector for high-energy gamma rays.In this paper,the prototype readout electronics design of the transition radiation detector is demonstrated,which aims to accurately measure the charge of the anodes using the SAMPA application specific integrated circuit chip.The electronic performance of the prototype system is evaluated in terms of noise,linearity,and resolution.Through the presented design,each electronic channel can achieve a dynamic range of 0–100 fC,the RMS noise level not exceeding 0.15 fC,and the integral nonlinearity was<0.2%.To further verify the readout electronic performance,a joint test with the detector was carried out,and the results show that the prototype system can satisfy the requirements of the detector's scientific goals.
