It is usually a time-consuming process to real-time set up 3D digital surface model(DSM) of an object with complex surface.On the basis of the architectural survey project of"Chilin Nunnery Reconstruction",t...It is usually a time-consuming process to real-time set up 3D digital surface model(DSM) of an object with complex surface.On the basis of the architectural survey project of"Chilin Nunnery Reconstruction",this paper investigates an easy and feasible way,that is,on project site,applying digital close range photogrammetry and CAD technique to establish the DSM for simulating ancient architectures with complex surface.The method has been proved very effective in practice.展开更多
As a GIS tool,visibility analysis is used in many areas to evaluate both visible and non-visible places.Visibility analysis builds on a digital surface model describing the terrain morphology,including the position an...As a GIS tool,visibility analysis is used in many areas to evaluate both visible and non-visible places.Visibility analysis builds on a digital surface model describing the terrain morphology,including the position and shapes of all objects that can sometimes act as visibility barriers.However,some barriers,for example vegetation,may be permeable to a certain degree.Despite extensive research and use of visibility analysis in different areas,standard GIS tools do not take permeability into account.This article presents a new method to calculate visibility through partly permeable obstacles.The method is based on a quasi-Monte Carlo simulation with 100 iterations of visibility calculation.Each iteration result represents 1%of vegetation permeability,which can thus range from 1%to 100%visibility behind vegetation obstacles.The main advantage of the method is greater accuracy of visibility results and easy implementation on any GIS software.The incorporation of the proposed method in GIS software would facilitate work in many fields,such as architecture,archaeology,radio communication,and the military.展开更多
The accuracy of Digital Surface Models(DSMs)generated using stereo matching methods varies due to the varying acquisition conditions and configuration parameters of stereo images.It has been a good practice to fuse th...The accuracy of Digital Surface Models(DSMs)generated using stereo matching methods varies due to the varying acquisition conditions and configuration parameters of stereo images.It has been a good practice to fuse these DSMs generated from various stereo pairs to achieve enhanced,in which multiple DSMs are combined through computational approaches into a single,more accurate,and complete DSM.However,accurately characterizing detailed objects and their boundaries still present a challenge since most boundary-ware fusion methods still struggle to achieve sharpened depth discontinuities due to the averaging effects of different DSMs.Therefore,we propose a simple and efficient adaptive image-guided DSM fusion method that applies k-means clustering on small patches of the orthophoto to guide the pixel-level fusion adapted to the most consistent and relevant elevation points.The experiment results show that our proposed method has outperformed comparing methods in accuracy and the ability to preserve sharpened depth edges.展开更多
A difficult problem in forestry is tree inventory.In this study, a GoProHero attached to a small unmanned aerial vehicle was used to capture images of a small area covered by pinus pinea trees. Then, a digital surface...A difficult problem in forestry is tree inventory.In this study, a GoProHero attached to a small unmanned aerial vehicle was used to capture images of a small area covered by pinus pinea trees. Then, a digital surface model was generated with image matching. The elevation model representing the terrain surface, a ‘digital terrain model’,was extracted from the digital surface model using morphological filtering. Individual trees were extracted by analyzing elevation flow on the digital elevation model because the elevation reached the highest value on the tree peaks compared to the neighborhood elevation pixels. The quality of the results was assessed by comparison with reference data for correctness of the estimated number of trees. The tree heights were calculated and evaluated with ground truth dataset. The results showed 80% correctness and 90% completeness.展开更多
Because a ship model surface (SMS) is a large double-curved 3-D surface,the machining efficiency of the cur- rent handcraft manufacturing method are very low,and the precision is difficult to control also.In order to ...Because a ship model surface (SMS) is a large double-curved 3-D surface,the machining efficiency of the cur- rent handcraft manufacturing method are very low,and the precision is difficult to control also.In order to greatly improve the machining efficiency and precision of SMS,based on the CAD/CAM/CNC technology,this paper proposed a model of SMS digi- tal manufacturing system,which is composed of five functional modules (preprocess module,CAD module,CAM module,post- process module and CNC module),and a twin-skeg SMS as an example,the key technologies & design principle of the nodtules were investigated also Based on the above research works,the first set of 4-axis SMS Digital Manufacturing System in China has been successfully developed,which can reduce the machining time of the twin-skeg SMS from 30 working days needed for the cur- rent handcrafting manufacturing method to 8 hours now,and which can control more effectively the precision of SMS also.展开更多
In modern terrain-following guidance it is an important index for flight vehicle to cruise about safely and normally. On the basis of a constructing method of digital surface model (DSM), the definition, classificatio...In modern terrain-following guidance it is an important index for flight vehicle to cruise about safely and normally. On the basis of a constructing method of digital surface model (DSM), the definition, classification and scale analysis of an isolated obstacle threatening flight safety of terrain-following guidance are made. When the interval of vertical-and cross-sections on DSM is 12. 5 m, the proportion of isolated obstacles to the data amount of DSM model to be loaded is optimal. The main factors influencing the lowest flying height in terrain-following guidance are analyzed, and a primary safe criterion of the lowest flying height over DSM model is proposed. According to their test errors, the lowest flying height over 1:10 000 DSM model can reach 40. 5 m^45. 0 m in terrain-following guidance. It is shown from the simulation results of a typical urban district that the proposed models and methods are reasonable and feasible.展开更多
In our previous studies, we demonstrated the usefulness of TanDEM-X interferometric bistatic mode with single polarization to obtain forest heights for the purposes of large area mapping. A key feature of our approach...In our previous studies, we demonstrated the usefulness of TanDEM-X interferometric bistatic mode with single polarization to obtain forest heights for the purposes of large area mapping. A key feature of our approach has been the use of a simplified Random Volume Over Ground(RVOG) model that locally estimates forest height. The model takes TanDEM-X interferometric coherence amplitude as an input and uses an external Digital Surface Model(DSM) to account for local slope variations due to terrain topography in order to achieve accurate forest height estimation. The selection of DSM for use as a local slope reference is essential, as an inaccurate DSM will result in less accurate terrain-correction and forest height estimation. In this paper, we assessed TanDEM-X height estimates associated with scale variations in different DSMs used in the model over a remote sensing supersite in Petawawa, Canada. The DSMs used for assessments and comparisons included ASTER GDEM, ALOS GDSM, airborne DRAPE DSM, Canadian DSM and TanDEM-X DSM. Airborne Laser Scanning(ALS) data were used as reference for terrain slope and forest height comparisons. The results showed that, with the exception of the ASTER GDEM, all DSMs were sufficiently accurate for the simplified RVOG model to provide a satisfactory estimate of stand-level forest height. When compared to the ALS 95th height percentile, the modeled forest heights had R2 values greater than 80% and Root-Mean-Square Errors(RMSE)less than 2 m. For a close similarity in slope estimation with the ALS reference, coverage across Canada and open data access, the 0.75 arc-second(20 m) resolution Canadian DSM was selected as a preferred choice for the simplified RVOG model to provide TanDEM-X height estimation in Canada.展开更多
The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrai...The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrain surface modeling, a new algorithm for the automatic generation of three dimensional triangulated irregular network from a point cloud is pro- posed. Based on the local topological consistency test, a combined algorithm of constrained 3D Delaunay triangulation and region-growing is extended to ensure topologically correct reconstruction. This paper also introduced an efficient neighbor- ing triangle location method by making full use of the surface normal information. Experimental results prove that this algo- rithm can efficiently obtain the most reasonable reconstructed mesh surface with arbitrary topology, wherein the automati- cally reconstructed surface has only small topological difference from the true surface. This algorithm has potential applica- tions to virtual environments, computer vision, and so on.展开更多
Prediction of channel dredging volume is critical for project cost estimation. However, many proposed approximate methods are not accurate. This paper presents a novel numerical method to accurately calculate the dred...Prediction of channel dredging volume is critical for project cost estimation. However, many proposed approximate methods are not accurate. This paper presents a novel numerical method to accurately calculate the dredg- ing volume using a 3D stratum model (DSM) and a channel surface model. First, the 3D DSM is constructed rapidly yet accurately from non-uniform rational B-splines (NURBS) surfaces through Boolean operation between a physical terrain model and a stratum surfaces model. Then, a parametric channel surface model is built from cross-section data and a channel center line using code implemented in the VC++ programming language. Finally, the volumes of different types of physical stratums can be calculated automatically and hierarchically to determine the dredging volume. Practical application shows that the DSM method is more precise and faster compared to the section method, and that the implementation of the developed software provides an interactive graphical user interface and visual presentation.展开更多
This paper investigates the differences that result from applying different approaches to uncertainty modeling and reports an experimental examining error estimation and propagation in elevation and slope, with the la...This paper investigates the differences that result from applying different approaches to uncertainty modeling and reports an experimental examining error estimation and propagation in elevation and slope, with the latter derived from the former. It is confirmed that significant differences exist between uncertainty descriptors, and propagation of uncertainty to end products is immensely affected by the specification of source uncertainty.展开更多
文摘It is usually a time-consuming process to real-time set up 3D digital surface model(DSM) of an object with complex surface.On the basis of the architectural survey project of"Chilin Nunnery Reconstruction",this paper investigates an easy and feasible way,that is,on project site,applying digital close range photogrammetry and CAD technique to establish the DSM for simulating ancient architectures with complex surface.The method has been proved very effective in practice.
基金This work was financially supported by project 133/2016/RPP-TO-1/b“Teaching of advanced techniques for geodata processing for follow-up study of geoinformatics”.
文摘As a GIS tool,visibility analysis is used in many areas to evaluate both visible and non-visible places.Visibility analysis builds on a digital surface model describing the terrain morphology,including the position and shapes of all objects that can sometimes act as visibility barriers.However,some barriers,for example vegetation,may be permeable to a certain degree.Despite extensive research and use of visibility analysis in different areas,standard GIS tools do not take permeability into account.This article presents a new method to calculate visibility through partly permeable obstacles.The method is based on a quasi-Monte Carlo simulation with 100 iterations of visibility calculation.Each iteration result represents 1%of vegetation permeability,which can thus range from 1%to 100%visibility behind vegetation obstacles.The main advantage of the method is greater accuracy of visibility results and easy implementation on any GIS software.The incorporation of the proposed method in GIS software would facilitate work in many fields,such as architecture,archaeology,radio communication,and the military.
基金John Hopkins University Applied Physics Lab to support the Imagery of the 2019 DFC datasets
文摘The accuracy of Digital Surface Models(DSMs)generated using stereo matching methods varies due to the varying acquisition conditions and configuration parameters of stereo images.It has been a good practice to fuse these DSMs generated from various stereo pairs to achieve enhanced,in which multiple DSMs are combined through computational approaches into a single,more accurate,and complete DSM.However,accurately characterizing detailed objects and their boundaries still present a challenge since most boundary-ware fusion methods still struggle to achieve sharpened depth discontinuities due to the averaging effects of different DSMs.Therefore,we propose a simple and efficient adaptive image-guided DSM fusion method that applies k-means clustering on small patches of the orthophoto to guide the pixel-level fusion adapted to the most consistent and relevant elevation points.The experiment results show that our proposed method has outperformed comparing methods in accuracy and the ability to preserve sharpened depth edges.
基金financially supported by the scientific research projects coordination unit of Akdeniz University,Project No.FBA-2015-446
文摘A difficult problem in forestry is tree inventory.In this study, a GoProHero attached to a small unmanned aerial vehicle was used to capture images of a small area covered by pinus pinea trees. Then, a digital surface model was generated with image matching. The elevation model representing the terrain surface, a ‘digital terrain model’,was extracted from the digital surface model using morphological filtering. Individual trees were extracted by analyzing elevation flow on the digital elevation model because the elevation reached the highest value on the tree peaks compared to the neighborhood elevation pixels. The quality of the results was assessed by comparison with reference data for correctness of the estimated number of trees. The tree heights were calculated and evaluated with ground truth dataset. The results showed 80% correctness and 90% completeness.
文摘Because a ship model surface (SMS) is a large double-curved 3-D surface,the machining efficiency of the cur- rent handcraft manufacturing method are very low,and the precision is difficult to control also.In order to greatly improve the machining efficiency and precision of SMS,based on the CAD/CAM/CNC technology,this paper proposed a model of SMS digi- tal manufacturing system,which is composed of five functional modules (preprocess module,CAD module,CAM module,post- process module and CNC module),and a twin-skeg SMS as an example,the key technologies & design principle of the nodtules were investigated also Based on the above research works,the first set of 4-axis SMS Digital Manufacturing System in China has been successfully developed,which can reduce the machining time of the twin-skeg SMS from 30 working days needed for the cur- rent handcrafting manufacturing method to 8 hours now,and which can control more effectively the precision of SMS also.
基金This project was supported by the National Natural Science Foundation of China (60072009).
文摘In modern terrain-following guidance it is an important index for flight vehicle to cruise about safely and normally. On the basis of a constructing method of digital surface model (DSM), the definition, classification and scale analysis of an isolated obstacle threatening flight safety of terrain-following guidance are made. When the interval of vertical-and cross-sections on DSM is 12. 5 m, the proportion of isolated obstacles to the data amount of DSM model to be loaded is optimal. The main factors influencing the lowest flying height in terrain-following guidance are analyzed, and a primary safe criterion of the lowest flying height over DSM model is proposed. According to their test errors, the lowest flying height over 1:10 000 DSM model can reach 40. 5 m^45. 0 m in terrain-following guidance. It is shown from the simulation results of a typical urban district that the proposed models and methods are reasonable and feasible.
基金This work was supported by Natural Resources Canada and the Canadian Space Agency under Multisource Biomass GRIP and by the German Aerospace Centre for provision of TanDEM-X data。
文摘In our previous studies, we demonstrated the usefulness of TanDEM-X interferometric bistatic mode with single polarization to obtain forest heights for the purposes of large area mapping. A key feature of our approach has been the use of a simplified Random Volume Over Ground(RVOG) model that locally estimates forest height. The model takes TanDEM-X interferometric coherence amplitude as an input and uses an external Digital Surface Model(DSM) to account for local slope variations due to terrain topography in order to achieve accurate forest height estimation. The selection of DSM for use as a local slope reference is essential, as an inaccurate DSM will result in less accurate terrain-correction and forest height estimation. In this paper, we assessed TanDEM-X height estimates associated with scale variations in different DSMs used in the model over a remote sensing supersite in Petawawa, Canada. The DSMs used for assessments and comparisons included ASTER GDEM, ALOS GDSM, airborne DRAPE DSM, Canadian DSM and TanDEM-X DSM. Airborne Laser Scanning(ALS) data were used as reference for terrain slope and forest height comparisons. The results showed that, with the exception of the ASTER GDEM, all DSMs were sufficiently accurate for the simplified RVOG model to provide a satisfactory estimate of stand-level forest height. When compared to the ALS 95th height percentile, the modeled forest heights had R2 values greater than 80% and Root-Mean-Square Errors(RMSE)less than 2 m. For a close similarity in slope estimation with the ALS reference, coverage across Canada and open data access, the 0.75 arc-second(20 m) resolution Canadian DSM was selected as a preferred choice for the simplified RVOG model to provide TanDEM-X height estimation in Canada.
基金Supported by the National Natural Science Foundation of China （No.40671158）, the National 863 Program of China（No.2006AA12Z224） and the Program for New Century Excellent Talents in University （No.NCET-05-0626）.
文摘The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrain surface modeling, a new algorithm for the automatic generation of three dimensional triangulated irregular network from a point cloud is pro- posed. Based on the local topological consistency test, a combined algorithm of constrained 3D Delaunay triangulation and region-growing is extended to ensure topologically correct reconstruction. This paper also introduced an efficient neighbor- ing triangle location method by making full use of the surface normal information. Experimental results prove that this algo- rithm can efficiently obtain the most reasonable reconstructed mesh surface with arbitrary topology, wherein the automati- cally reconstructed surface has only small topological difference from the true surface. This algorithm has potential applica- tions to virtual environments, computer vision, and so on.
基金Supported by the Science Fund for Creative Research Groups of the National Natural Science Foundation of China (No. 51021004)National Natural Science Foundation of China(No. 50879056)National Key Technologies R&D Program in the 12th Five-Year Plan of China(No. 2011BAB10B06)
文摘Prediction of channel dredging volume is critical for project cost estimation. However, many proposed approximate methods are not accurate. This paper presents a novel numerical method to accurately calculate the dredg- ing volume using a 3D stratum model (DSM) and a channel surface model. First, the 3D DSM is constructed rapidly yet accurately from non-uniform rational B-splines (NURBS) surfaces through Boolean operation between a physical terrain model and a stratum surfaces model. Then, a parametric channel surface model is built from cross-section data and a channel center line using code implemented in the VC++ programming language. Finally, the volumes of different types of physical stratums can be calculated automatically and hierarchically to determine the dredging volume. Practical application shows that the DSM method is more precise and faster compared to the section method, and that the implementation of the developed software provides an interactive graphical user interface and visual presentation.
文摘This paper investigates the differences that result from applying different approaches to uncertainty modeling and reports an experimental examining error estimation and propagation in elevation and slope, with the latter derived from the former. It is confirmed that significant differences exist between uncertainty descriptors, and propagation of uncertainty to end products is immensely affected by the specification of source uncertainty.
