An ultrasonic sensitivity-improved fiber-optic Fabry-Perot interferometer （FPI） is proposed and employed for ultra- sonic imaging of seismic physical models （SPMs）. The FPI comprises a flexible ultra-thin gold fil...An ultrasonic sensitivity-improved fiber-optic Fabry-Perot interferometer （FPI） is proposed and employed for ultra- sonic imaging of seismic physical models （SPMs）. The FPI comprises a flexible ultra-thin gold film and the end face of a graded-index multimode fiber （MMF）, both of which are enclosed in a ceramic tube. The MMF in a specified length can collimate the diverged light beam and compensate for the light loss inside the air cavity, leading to an increased spectral fringe visibility and thus a steeper spectral slope. By using the spectral sideband filtering technique, the collimated FP1 shows an improved ultrasonic response. Moreover, two-dimensional images of two SPMs are achieved in air by recon- structing the pulse-echo signals through using the time-of-flight approach. The proposed sensor with easy fabrication and compact size can be a good candidate for high-sensitivity and high-precision nondestructive testing of SPMs.展开更多
The paper presents a number of signal processing approaches for the spectral interferometric interrogation of extrinsic Fabry-Perot interferometers(EFPIs). The analysis of attainable microdisplacement resolution is pe...The paper presents a number of signal processing approaches for the spectral interferometric interrogation of extrinsic Fabry-Perot interferometers(EFPIs). The analysis of attainable microdisplacement resolution is performed and the analytical equations describing the dependence of resolution on parameters of the interrogation setup are derived. The efficiency of the proposed signal processing approaches and the validity of analytical derivations are supported by experiments. The proposed approaches allow the interrogation of up to four multiplexed sensors with attained resolution between 30 pm and 80 pm, up to three times improvement of microdisplacement resolution of a single sensor by means of using the reference interferometer and noisecompensating approach, and ability to register signals with frequencies up to 1 kHz in the case of 1 Hz spectrum acquisition rate. The proposed approaches can be used for various applications, including biomedical, industrial inspection, and others, amongst the microdisplacement measurement.展开更多
The fiber Fabry-Perot interferometer used to measure the refractive index modulation of polymer-dispersed liquid crystal is introduced.From measuring the quantity of the interference fringe shift with a CCD based on t...The fiber Fabry-Perot interferometer used to measure the refractive index modulation of polymer-dispersed liquid crystal is introduced.From measuring the quantity of the interference fringe shift with a CCD based on the theory of isoclinal interference fringes formatting,the maximal refractive index modulation versus different external voltages,3.899×10-3 in the external voltage of 57.4 V/μm,and the dynamic refractive index modulation versus response time in the external voltage of 8 V/μm are found in our prepared 1.250 mm-thick PMMA/E49/TNF/ECZ polymer-dispersed liquid crystals.The experimental results will be helpful to understand the photoinduced reaction mechanism of the material and optimize the mixture ratio of each component.展开更多
Periodic resistance oscillations in Fabry-Perot quantum Hall interferometers are observed at integer filling factors of the constrictions, fc=1, 2, 3, 4, 5 and 6. Rather than the Aharonov-Bohm interference, these osci...Periodic resistance oscillations in Fabry-Perot quantum Hall interferometers are observed at integer filling factors of the constrictions, fc=1, 2, 3, 4, 5 and 6. Rather than the Aharonov-Bohm interference, these oscillations are attributed to the Coulomb interactions between interfering edge states and localized states in the central island of an interferometer, as confirmed by the observation of a positive slope for the lines of constant oscillation phase in the image plot of resistance in the 13 Vs plane. Similar resistance oscillations are also observed when the area A of the center regime and the backseattering probability of interfering edge states are varied, by changing the side-gate voltages and the configuration of the quantum point contacts, respectively. The oscillation amplitudes decay exponentially with temperature in the ramge of 40mK〈 T ≤ 130 mK, with a characteristic temperature T0 -25 mK, consistent with recent theoretical and experimental works.展开更多
Based on dual-differential comparing principle, an experimental system of optical fiber F-P interferometric micro-displacement measurement is introduced. It is capable of achieving the absolute displacement measuremen...Based on dual-differential comparing principle, an experimental system of optical fiber F-P interferometric micro-displacement measurement is introduced. It is capable of achieving the absolute displacement measurement, and wavelet transforms is adopted as theory fundament to extract the optical F-P interferometric characteristic signal and remove the noise, so its resolution can reach 0. 01 μm in the dynamic range of 0～ 1 mm.展开更多
In this paper,a theoretical analysis of how the excitation conditions affect the sapphire fiber Fabry-Perot interferometer(SFPI)visibility was performed.The conditions were considered,in which an SFPI was excited by a...In this paper,a theoretical analysis of how the excitation conditions affect the sapphire fiber Fabry-Perot interferometer(SFPI)visibility was performed.The conditions were considered,in which an SFPI was excited by a single-mode fiber(SMF),a multimode fiber(MMF),and a fiber collimator.The finite difference method(FDM)was used to realize the numerical solution of the modal electric fields,and then,the modal excited distributions in the sapphire fiber and the SFPI visibility were calculated.The results showed that different numbers of modes were excited in sapphire fibers under different excitation conditions and finally affected the fringe visibility of the SFPI.The fiber collimator excited the fewest modes and the visibility remained at the highest level.Finally,an experiment was performed,and the experimental results agreed well with the theoretical results.展开更多
An improved denoising method and its application in pulse beat signal denoising are studied.The proposed denoising algorithm takes the advantages of local mean decomposition(LMD)and time-frequency peak filtering(TFPF)...An improved denoising method and its application in pulse beat signal denoising are studied.The proposed denoising algorithm takes the advantages of local mean decomposition(LMD)and time-frequency peak filtering(TFPF),called L-T algorithm.As a classical time-frequency filtering method,TFPF can effectively suppress random noise with signal amplitude retained when selecting a longer window length,while the signal amplitude will be seriously attenuated when selecting a shorter window length.In order to maintain effective signal amplitude and suppress random noise,LMD and TFPF are improved.Firstly,the original signal is decomposed into progression-free survival(PFS)by LMD,and then the standard error of mean(SEM)of each product function is calculated to classify many PFSs into useful component,mixed component and noise component.Secondly,by using the shorter window TFPF for useful component and the longer window TFPF for mixed component,noise component is removed and the final signal is obtained after reconstruction.Finally,the proposed algorithm is used for noise reduction of an Fabry-Perot(F-P)pressure sensor.Experimental results show that compared with traditional wavelet,L-T algorithm has better denoising effect on sampled data.展开更多
Pressure sensors based on fiber-optic extrinsic Fabry-Perot interferometer(EFPI)have been extensively applied in various industrial and biomedical fields.In this paper,some key improvements of EFPI-based pressure sens...Pressure sensors based on fiber-optic extrinsic Fabry-Perot interferometer(EFPI)have been extensively applied in various industrial and biomedical fields.In this paper,some key improvements of EFPI-based pressure sensors such as the controlled thermal bonding technique,diaphragm-based EFPI sensors,and white light interference technology have been reviewed.Recent progress on signal demodulation method and applications of EFPI-based pressure sensors has been introduced.Signal demodulation algorithms based on the cross correlation and mean square error(MSE)estimation have been proposed for retrieving the cavity length of EFPI.Absolute measurement with a resolution of 0.08 nm over large dynamic range has been carried out.For downhole monitoring,an EFPI and a fiber Bragg grating(FBG)cascade multiplexing fiber-optic sensor system has been developed,which can operate in temperature 300℃with a good long-term stability and extremely low temperature cross-sensitivity.Diaphragm-based EFPI pressure sensors have been successfully used for low pressure and acoustic wave detection.Experimental results show that a sensitivity of 31 mV/Pa in the frequency range of 100 Hz to 12.7 kHz for aeroacoustic wave detection has been obtained.展开更多
A novel scheme is proposed to transform a Gaussian optical pulse to a millimeter-wave （mm-wave） frequency modulation pulse by using a Fabry-Perot interferometer （FPI） for radio-over-fiber （ROF） system. It is sho...A novel scheme is proposed to transform a Gaussian optical pulse to a millimeter-wave （mm-wave） frequency modulation pulse by using a Fabry-Perot interferometer （FPI） for radio-over-fiber （ROF） system. It is shown that modulation frequency of mm-wave is determined by the optical path of the Fabry-Perot （F-P） cavity, and amplitude decay time and energy transfer efficiency axe related to the reflectivity of the F-P cavity mirror. The effect of pulse train extension on inter-symbol interference is also discussed.展开更多
A versatile fiber interferometer was proposed for high precision measurement. The sensor exploited a double-cavity within the unique sensing arm of an extrinsic-type fiber Fabry-Perot interferometer to produce the qua...A versatile fiber interferometer was proposed for high precision measurement. The sensor exploited a double-cavity within the unique sensing arm of an extrinsic-type fiber Fabry-Perot interferometer to produce the quadrature phase-shifted interference fringes. Interference signal processing was carried out using a modified zero-crossing （fringe） counting technique to demodulate two sets of fringes. The fiber interferometer has been successfully employed for dynamic displacement measurement under different displacement profiles over a range of 0.7 p.m to 140 p.m. A dedicated computer incorporating the demodulation algorithm was next used to interpret these detected data as well as plot the displacement information with a resolution of 2/64. A commercial displacement sensor was employed for comparison purposes with the experimental data obtained from the fiber interferometer as well as to gauge its performance, resulting in the maximum error of 2.8% over the entire displacement range studied.展开更多
A curvature sensor based on an Fabry-Perot （FP） interferometer was proposed. A capillary silica tube was fusion spliced between two single mode fibers, producing an FP cavity. Two FP sensors with different cavity le...A curvature sensor based on an Fabry-Perot （FP） interferometer was proposed. A capillary silica tube was fusion spliced between two single mode fibers, producing an FP cavity. Two FP sensors with different cavity lengths were developed and subjected to curvature and temperature. The FP sensor with longer cavity showed three distinct operating regions for the curvature measurement. Namely, a linear response was shown for an intermediate curvature radius range, presenting a maximum sensitivity of 68.52 pm/m-1. When subjected to temperature, the sensing head produced a similar response for different curvature radii, with a sensitivity varying from 0.84 pm/℃ to 0.89 pm/℃, which resulted in a small cross-sensitivity to temperature when the FP sensor was subjected to curvature. The FP cavity with shorter length presented low sensitivity to curvature.展开更多
A displacement sensor based on the fiber Fabry-Perot (F-P) cavity was proposed in this paper. Theoretical and experimental analyses were presented. Displacement resolution was demonstrated by spectrum-domain experimen...A displacement sensor based on the fiber Fabry-Perot (F-P) cavity was proposed in this paper. Theoretical and experimental analyses were presented. Displacement resolution was demonstrated by spectrum-domain experiments to obtain the dynamic range of the F-P sensor, and a piezoelectric crystal unit (PZT) was used as the driver. The output signal was modulated by a piezoelectric ceramic ring and demodulated by a phase-locked oscillator. The experimental results show that the displacement resolution of the F-P sensor is less than 5 nm and the dynamic range is more than 100 μm. As acceleration is the second-order differential of displacement, an accelerometer model was proposed using the finite element method (FEM) nd ANSYS software.展开更多
Fast and stable phase control is essential for many applications in optics. Here, we propose an all-fiber all-optical phase modulation scheme based on a Fabry–Perot interferometer(FPI) and an Er/Yb co-doped fiber(EYD...Fast and stable phase control is essential for many applications in optics. Here, we propose an all-fiber all-optical phase modulation scheme based on a Fabry–Perot interferometer(FPI) and an Er/Yb co-doped fiber(EYDF). By using the EYDF as an F-P cavity via rational design, a phase shift with a modulation sensitivity of 0.0312π/mW is introduced to the modulator.The phase shifts in the EYDF consist of a thermal phase shift and a nonlinear phase shift with a ratio of 19:1, and the corresponding temporal responses of the modulation are 204 ms and 2.5 ms, respectively. In addition, the compact FPI is encapsulated to provide excellent stability for the modulator.展开更多
A novel zeolite-coated fiber sensors for detection of volatile organic compounds （VOCs） based on the Fabry-Perot interferometer was proposed and demonstrated. The sensor comprised a polycrystalline silicalite thin f...A novel zeolite-coated fiber sensors for detection of volatile organic compounds （VOCs） based on the Fabry-Perot interferometer was proposed and demonstrated. The sensor comprised a polycrystalline silicalite thin film grown up on the cleaved end face of a standard single-mode fiber. The inline Fabry-Perot cavity was composed by the end face of the single-mode fiber and the thin film. The sensor device operated by measuring the interference signal, which was a function of the amount of chemical vapor adsorption in its crystalline micro porous structure. Experimental results showed that the proposed VOC sensor worked well and the sensitivities were 2.78×10^-3dB/ppm when the concentration ranged from 350ppm to 2100ppm and 1.23×10^-3 dB/ppm when the concentration ranged from 2100ppm to 5250 ppm.展开更多
In this paper, a sinusoidal phase-modulating Fabry-Perot interferometer is proposed to measure angular displacement. The usefulness of the interferometer is demonstrated by simulations and experiments.
The sensing characteristics of irradiated fiber Bragg gratings(FBGs)and Fabry-Perot interferometers(FPIs)were investigated under a 2MGy dose of gamma radiation.The study found that the pressure sensitivity of FP senso...The sensing characteristics of irradiated fiber Bragg gratings(FBGs)and Fabry-Perot interferometers(FPIs)were investigated under a 2MGy dose of gamma radiation.The study found that the pressure sensitivity of FP sensors after irradiation was stable,while the temperature sensitivity of FBG sensors was unstable,and both wavelengths displayed a shift.These findings offer the possibility for the application of FP pressure sensors in the gamma radiation environments,and FBG sensors require further research to be suitable for application in the nuclear radiation environments.展开更多
A simple nanostrain direct current （DC） measurement system based on a chirped Bragg grating Fabry-Perot （FP） structure is presented. The FP cavity, formed between the chirped fiber Bragg grating （CFBG） and the f...A simple nanostrain direct current （DC） measurement system based on a chirped Bragg grating Fabry-Perot （FP） structure is presented. The FP cavity, formed between the chirped fiber Bragg grating （CFBG） and the fiber end face, presents an aperiodic behavior due to the CFBG. A laser located in the fringe pattern slope is used to interrogate the sensing head. The optical power parameter is analyzed when strain is applied, for long and short period fringe pattern wavelengths, and sensitivities of-2.87 μW/με and-5.48μW/με are respectively obtained. This configuration presents a resolution of 70 ε.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61735014,61327012,and 61275088)the Scientific Research Program Funded by Shaanxi Provincial Education Department,China(Grant No.08JZ58)the Northwest University Graduate Innovation and Creativity Funds,China(Grant No.YZZ17088)
文摘An ultrasonic sensitivity-improved fiber-optic Fabry-Perot interferometer （FPI） is proposed and employed for ultra- sonic imaging of seismic physical models （SPMs）. The FPI comprises a flexible ultra-thin gold film and the end face of a graded-index multimode fiber （MMF）, both of which are enclosed in a ceramic tube. The MMF in a specified length can collimate the diverged light beam and compensate for the light loss inside the air cavity, leading to an increased spectral fringe visibility and thus a steeper spectral slope. By using the spectral sideband filtering technique, the collimated FP1 shows an improved ultrasonic response. Moreover, two-dimensional images of two SPMs are achieved in air by recon- structing the pulse-echo signals through using the time-of-flight approach. The proposed sensor with easy fabrication and compact size can be a good candidate for high-sensitivity and high-precision nondestructive testing of SPMs.
文摘The paper presents a number of signal processing approaches for the spectral interferometric interrogation of extrinsic Fabry-Perot interferometers(EFPIs). The analysis of attainable microdisplacement resolution is performed and the analytical equations describing the dependence of resolution on parameters of the interrogation setup are derived. The efficiency of the proposed signal processing approaches and the validity of analytical derivations are supported by experiments. The proposed approaches allow the interrogation of up to four multiplexed sensors with attained resolution between 30 pm and 80 pm, up to three times improvement of microdisplacement resolution of a single sensor by means of using the reference interferometer and noisecompensating approach, and ability to register signals with frequencies up to 1 kHz in the case of 1 Hz spectrum acquisition rate. The proposed approaches can be used for various applications, including biomedical, industrial inspection, and others, amongst the microdisplacement measurement.
文摘The fiber Fabry-Perot interferometer used to measure the refractive index modulation of polymer-dispersed liquid crystal is introduced.From measuring the quantity of the interference fringe shift with a CCD based on the theory of isoclinal interference fringes formatting,the maximal refractive index modulation versus different external voltages,3.899×10-3 in the external voltage of 57.4 V/μm,and the dynamic refractive index modulation versus response time in the external voltage of 8 V/μm are found in our prepared 1.250 mm-thick PMMA/E49/TNF/ECZ polymer-dispersed liquid crystals.The experimental results will be helpful to understand the photoinduced reaction mechanism of the material and optimize the mixture ratio of each component.
基金Supported by the National Basic Research Program of China under Grant No 2014CB920904the National Natural Science Foundation of China under Grant No 91221203the Strategic Priority Research Program B of the Chinese Academy of Sciences under Grant No XDB07010200
文摘Periodic resistance oscillations in Fabry-Perot quantum Hall interferometers are observed at integer filling factors of the constrictions, fc=1, 2, 3, 4, 5 and 6. Rather than the Aharonov-Bohm interference, these oscillations are attributed to the Coulomb interactions between interfering edge states and localized states in the central island of an interferometer, as confirmed by the observation of a positive slope for the lines of constant oscillation phase in the image plot of resistance in the 13 Vs plane. Similar resistance oscillations are also observed when the area A of the center regime and the backseattering probability of interfering edge states are varied, by changing the side-gate voltages and the configuration of the quantum point contacts, respectively. The oscillation amplitudes decay exponentially with temperature in the ramge of 40mK〈 T ≤ 130 mK, with a characteristic temperature T0 -25 mK, consistent with recent theoretical and experimental works.
文摘Based on dual-differential comparing principle, an experimental system of optical fiber F-P interferometric micro-displacement measurement is introduced. It is capable of achieving the absolute displacement measurement, and wavelet transforms is adopted as theory fundament to extract the optical F-P interferometric characteristic signal and remove the noise, so its resolution can reach 0. 01 μm in the dynamic range of 0～ 1 mm.
基金supported by the National Natural Science Foundation of China(Grant Nos.62025505 and 62061136002).
文摘In this paper,a theoretical analysis of how the excitation conditions affect the sapphire fiber Fabry-Perot interferometer(SFPI)visibility was performed.The conditions were considered,in which an SFPI was excited by a single-mode fiber(SMF),a multimode fiber(MMF),and a fiber collimator.The finite difference method(FDM)was used to realize the numerical solution of the modal electric fields,and then,the modal excited distributions in the sapphire fiber and the SFPI visibility were calculated.The results showed that different numbers of modes were excited in sapphire fibers under different excitation conditions and finally affected the fringe visibility of the SFPI.The fiber collimator excited the fewest modes and the visibility remained at the highest level.Finally,an experiment was performed,and the experimental results agreed well with the theoretical results.
基金National Natural Science Foundation of China(No.51467009)Natural Science Foundation of Shanxi Province(No.51400000)。
文摘An improved denoising method and its application in pulse beat signal denoising are studied.The proposed denoising algorithm takes the advantages of local mean decomposition(LMD)and time-frequency peak filtering(TFPF),called L-T algorithm.As a classical time-frequency filtering method,TFPF can effectively suppress random noise with signal amplitude retained when selecting a longer window length,while the signal amplitude will be seriously attenuated when selecting a shorter window length.In order to maintain effective signal amplitude and suppress random noise,LMD and TFPF are improved.Firstly,the original signal is decomposed into progression-free survival(PFS)by LMD,and then the standard error of mean(SEM)of each product function is calculated to classify many PFSs into useful component,mixed component and noise component.Secondly,by using the shorter window TFPF for useful component and the longer window TFPF for mixed component,noise component is removed and the final signal is obtained after reconstruction.Finally,the proposed algorithm is used for noise reduction of an Fabry-Perot(F-P)pressure sensor.Experimental results show that compared with traditional wavelet,L-T algorithm has better denoising effect on sampled data.
文摘Pressure sensors based on fiber-optic extrinsic Fabry-Perot interferometer(EFPI)have been extensively applied in various industrial and biomedical fields.In this paper,some key improvements of EFPI-based pressure sensors such as the controlled thermal bonding technique,diaphragm-based EFPI sensors,and white light interference technology have been reviewed.Recent progress on signal demodulation method and applications of EFPI-based pressure sensors has been introduced.Signal demodulation algorithms based on the cross correlation and mean square error(MSE)estimation have been proposed for retrieving the cavity length of EFPI.Absolute measurement with a resolution of 0.08 nm over large dynamic range has been carried out.For downhole monitoring,an EFPI and a fiber Bragg grating(FBG)cascade multiplexing fiber-optic sensor system has been developed,which can operate in temperature 300℃with a good long-term stability and extremely low temperature cross-sensitivity.Diaphragm-based EFPI pressure sensors have been successfully used for low pressure and acoustic wave detection.Experimental results show that a sensitivity of 31 mV/Pa in the frequency range of 100 Hz to 12.7 kHz for aeroacoustic wave detection has been obtained.
文摘A novel scheme is proposed to transform a Gaussian optical pulse to a millimeter-wave （mm-wave） frequency modulation pulse by using a Fabry-Perot interferometer （FPI） for radio-over-fiber （ROF） system. It is shown that modulation frequency of mm-wave is determined by the optical path of the Fabry-Perot （F-P） cavity, and amplitude decay time and energy transfer efficiency axe related to the reflectivity of the F-P cavity mirror. The effect of pulse train extension on inter-symbol interference is also discussed.
文摘A versatile fiber interferometer was proposed for high precision measurement. The sensor exploited a double-cavity within the unique sensing arm of an extrinsic-type fiber Fabry-Perot interferometer to produce the quadrature phase-shifted interference fringes. Interference signal processing was carried out using a modified zero-crossing （fringe） counting technique to demodulate two sets of fringes. The fiber interferometer has been successfully employed for dynamic displacement measurement under different displacement profiles over a range of 0.7 p.m to 140 p.m. A dedicated computer incorporating the demodulation algorithm was next used to interpret these detected data as well as plot the displacement information with a resolution of 2/64. A commercial displacement sensor was employed for comparison purposes with the experimental data obtained from the fiber interferometer as well as to gauge its performance, resulting in the maximum error of 2.8% over the entire displacement range studied.
文摘A curvature sensor based on an Fabry-Perot （FP） interferometer was proposed. A capillary silica tube was fusion spliced between two single mode fibers, producing an FP cavity. Two FP sensors with different cavity lengths were developed and subjected to curvature and temperature. The FP sensor with longer cavity showed three distinct operating regions for the curvature measurement. Namely, a linear response was shown for an intermediate curvature radius range, presenting a maximum sensitivity of 68.52 pm/m-1. When subjected to temperature, the sensing head produced a similar response for different curvature radii, with a sensitivity varying from 0.84 pm/℃ to 0.89 pm/℃, which resulted in a small cross-sensitivity to temperature when the FP sensor was subjected to curvature. The FP cavity with shorter length presented low sensitivity to curvature.
基金Project (No. 111303-8112D2) supported by the National DefenseResearch Foundation of Zhejiang University, China
文摘A displacement sensor based on the fiber Fabry-Perot (F-P) cavity was proposed in this paper. Theoretical and experimental analyses were presented. Displacement resolution was demonstrated by spectrum-domain experiments to obtain the dynamic range of the F-P sensor, and a piezoelectric crystal unit (PZT) was used as the driver. The output signal was modulated by a piezoelectric ceramic ring and demodulated by a phase-locked oscillator. The experimental results show that the displacement resolution of the F-P sensor is less than 5 nm and the dynamic range is more than 100 μm. As acceleration is the second-order differential of displacement, an accelerometer model was proposed using the finite element method (FEM) nd ANSYS software.
基金supported by the National Key Research and Development Program of China (No. 2018YFC1503703)the Shanghai Academy of Spaceflight Technology(No. SAST2019-127)。
文摘Fast and stable phase control is essential for many applications in optics. Here, we propose an all-fiber all-optical phase modulation scheme based on a Fabry–Perot interferometer(FPI) and an Er/Yb co-doped fiber(EYDF). By using the EYDF as an F-P cavity via rational design, a phase shift with a modulation sensitivity of 0.0312π/mW is introduced to the modulator.The phase shifts in the EYDF consist of a thermal phase shift and a nonlinear phase shift with a ratio of 19:1, and the corresponding temporal responses of the modulation are 204 ms and 2.5 ms, respectively. In addition, the compact FPI is encapsulated to provide excellent stability for the modulator.
文摘A novel zeolite-coated fiber sensors for detection of volatile organic compounds （VOCs） based on the Fabry-Perot interferometer was proposed and demonstrated. The sensor comprised a polycrystalline silicalite thin film grown up on the cleaved end face of a standard single-mode fiber. The inline Fabry-Perot cavity was composed by the end face of the single-mode fiber and the thin film. The sensor device operated by measuring the interference signal, which was a function of the amount of chemical vapor adsorption in its crystalline micro porous structure. Experimental results showed that the proposed VOC sensor worked well and the sensitivities were 2.78×10^-3dB/ppm when the concentration ranged from 350ppm to 2100ppm and 1.23×10^-3 dB/ppm when the concentration ranged from 2100ppm to 5250 ppm.
文摘In this paper, a sinusoidal phase-modulating Fabry-Perot interferometer is proposed to measure angular displacement. The usefulness of the interferometer is demonstrated by simulations and experiments.
基金This work was funded by the National Science Foundation of China(NCSF)(Grant No.51875091)the Study and Application of Full-model Impact Dynamic Fretting Damage Test System in the Extreme Environment(Grant No.51627806)+3 种基金Research on Application of Optical Fiber Sensing in Nuclear Power(Grant No.180046)Optical Fiber Sensing and Processing Prototype for Nuclear Field Key Parameter Measurement(Grant No.191091)Data Acquisition and Post-processing Software Development for Integrated Fiber Optic Sensors(Grant No.190167)the State 111 Project(Grant No.B14039).
文摘The sensing characteristics of irradiated fiber Bragg gratings(FBGs)and Fabry-Perot interferometers(FPIs)were investigated under a 2MGy dose of gamma radiation.The study found that the pressure sensitivity of FP sensors after irradiation was stable,while the temperature sensitivity of FBG sensors was unstable,and both wavelengths displayed a shift.These findings offer the possibility for the application of FP pressure sensors in the gamma radiation environments,and FBG sensors require further research to be suitable for application in the nuclear radiation environments.
文摘A simple nanostrain direct current （DC） measurement system based on a chirped Bragg grating Fabry-Perot （FP） structure is presented. The FP cavity, formed between the chirped fiber Bragg grating （CFBG） and the fiber end face, presents an aperiodic behavior due to the CFBG. A laser located in the fringe pattern slope is used to interrogate the sensing head. The optical power parameter is analyzed when strain is applied, for long and short period fringe pattern wavelengths, and sensitivities of-2.87 μW/με and-5.48μW/με are respectively obtained. This configuration presents a resolution of 70 ε.
