The estimation of oil spill coverage is an important part of monitoring of oil spills at sea.The spatial resolution of images collected by airborne hyper-spectral remote sensing limits both the detection of oil spills...The estimation of oil spill coverage is an important part of monitoring of oil spills at sea.The spatial resolution of images collected by airborne hyper-spectral remote sensing limits both the detection of oil spills and the accuracy of estimates of their size.We consider at-sea oil spills with zonal distribution in this paper and improve the traditional independent component analysis algorithm.For each independent component we added two constraint conditions:non-negativity and constant sum.We use priority weighting by higher-order statistics,and then the spectral angle match method to overcome the order nondeterminacy.By these steps,endmembers can be extracted and abundance quantified simultaneously.To examine the coverage of a real oil spill and correct our estimate,a simulation experiment and a real experiment were designed using the algorithm described above.The result indicated that,for the simulation data,the abundance estimation error is 2.52% and minimum root mean square error of the reconstructed image is 0.030 6.We estimated the oil spill rate and area based on eight hyper-spectral remote sensing images collected by an airborne survey of Shandong Changdao in 2011.The total oil spill area was 0.224 km^2,and the oil spill rate was 22.89%.The method we demonstrate in this paper can be used for the automatic monitoring of oil spill coverage rates.It also allows the accurate estimation of the oil spill area.展开更多
Independent component analysis （ICA） is the primary statistical method for solving the problems of blind source separation. The fast ICA is a famous and excellent algorithm and its contrast function is optimized by ...Independent component analysis （ICA） is the primary statistical method for solving the problems of blind source separation. The fast ICA is a famous and excellent algorithm and its contrast function is optimized by the quadratic convergence of Newton iteration method. In order to improve the convergence speed and the separation precision of the fast ICA, an improved fast ICA algorithm is presented. The algorithm introduces an efficient Newton＇s iterative method with fifth-order convergence for optimizing the contrast function and gives the detail derivation process and the corresponding condition. The experimental results demonstrate that the convergence speed and the separation precision of the improved algorithm are better than that of the fast ICA.展开更多
One important application of independent component analysis （ICA） is in image processing. A two dimensional （2-D） composite ICA algorithm framework for 2-D image independent component analysis （2-D ICA） is propo...One important application of independent component analysis （ICA） is in image processing. A two dimensional （2-D） composite ICA algorithm framework for 2-D image independent component analysis （2-D ICA） is proposed. The 2-D nature of the algorithm provides it an advantage of circumventing the roundabout transforming procedures between two dimensional （2-D） image deta and one-dimensional （l-D） signal. Moreover the combination of the Newton （fixed-point algorithm） and natural gradient algorithms in this composite algorithm increases its efficiency and robustness. The convincing results of a successful example in functional magnetic resonance imaging （fMRI） show the potential application of composite 2-D ICA in the brain activity detection.展开更多
It is an important precondition for machine fault diagnosis that vibrationsignal can be extracted effectively. Based on the characteristic of noise interfused during thecourse of sampling vibration signal, independent...It is an important precondition for machine fault diagnosis that vibrationsignal can be extracted effectively. Based on the characteristic of noise interfused during thecourse of sampling vibration signal, independent component analysis (ICA) method is combined withwavelet to de-noise. Firstly, The sampled signal can be separated with ICA, then the function offrequency band chosen with multi-resolution wavelet transform can be used to judge whether thestochastic disturbance singular signal is interfused. By these ways, the vibration signals can beextracted effectively, which provides favorable condition for subsequent feature detection ofvibration signal and fault diagnosis.展开更多
A statistical signal processing technique was proposed and verified as independent component analysis(ICA) for fault detection and diagnosis of industrial systems without exact and detailed model.Actually,the aim is t...A statistical signal processing technique was proposed and verified as independent component analysis(ICA) for fault detection and diagnosis of industrial systems without exact and detailed model.Actually,the aim is to utilize system as a black box.The system studied is condenser system of one of MAPNA's power plants.At first,principal component analysis(PCA) approach was applied to reduce the dimensionality of the real acquired data set and to identify the essential and useful ones.Then,the fault sources were diagnosed by ICA technique.The results show that ICA approach is valid and effective for faults detection and diagnosis even in noisy states,and it can distinguish main factors of abnormality among many diverse parts of a power plant's condenser system.This selectivity problem is left unsolved in many plants,because the main factors often become unnoticed by fault expansion through other parts of the plants.展开更多
Independent component analysis was applied to analyze the acoustic signals from diesel engine. First the basic prin-ciple of independent component analysis (ICA) was reviewed. Diesel engine acoustic signal was decompo...Independent component analysis was applied to analyze the acoustic signals from diesel engine. First the basic prin-ciple of independent component analysis (ICA) was reviewed. Diesel engine acoustic signal was decomposed into several inde-pendent components (ICs); Fourier transform and continuous wavelet transform (CWT) were applied to analyze the independent components. Different noise sources of the diesel engine were separated, based on the characteristics of different component in time-frequency domain.展开更多
A small target detection approach based on independent component analysis for hyperspectral data is put forward. In this algorithm, firstly the fast independent component analysis(FICA) is used to collect target infor...A small target detection approach based on independent component analysis for hyperspectral data is put forward. In this algorithm, firstly the fast independent component analysis(FICA) is used to collect target information hided in high-dimensional data and projects them into low-dimensional space.Secondly, the feature images are selected with kurtosis .At last, small targets are extracted with histogram image segmentation which has been labeled by skewness.展开更多
To overcome the inter-carrier interference （ICI） of orthogonal frequency division multiplexing （OFDM） systems subject to unknown carrier frequency offset （CFO） and multipath, this paper develops a blind adaptive...To overcome the inter-carrier interference （ICI） of orthogonal frequency division multiplexing （OFDM） systems subject to unknown carrier frequency offset （CFO） and multipath, this paper develops a blind adaptive interference suppression scheme based on independent component analysis （ICA）. Taking into account statistical independence of subcarriers＇ signals of OFDM, the signal recovery mechanism is investigated to achieve the goal of blind equalization. The received OFDM signals can be considered as the mixed observation signals. The effect of CFO and multipath corresponds to the mixing matrix in the problem of blind source separation （BSS） framework. In this paper, the ICA- based OFDM system model is built, and the proposed ICA-based detector is exploited to extract source signals from the observation of a received mixture based on the assumption of statistical independence between the sources. The blind separation technique can increase spectral efficiency and provide robustness performance against erroneous parameter estimation problem. Theoretical analysis and simulation results show that compared with the conventional pilot-based scheme, the improved performance of OFDM systems is obtained by the proposed ICA-based detection technique.展开更多
A new method was developed for batch process monitoring in this paper. In the devdopad method, just-in-time learning （ JITL ） and independent component analysis （ICA） were integrated to build JITL-ICA monitoring s...A new method was developed for batch process monitoring in this paper. In the devdopad method, just-in-time learning （ JITL ） and independent component analysis （ICA） were integrated to build JITL-ICA monitoring scheme. JITL was employed to tackle with the characteristics of batch process such as inherent time- varying dynamics, multiple operating phases, and especially the case of uneven length stage. According to new coming test data, the most correlated segmentation was obtained from batch-wise unfolded training data by JITL. Then, ICA served as the principal components extraction approach. Therefore, the non.Gaussian distributed data can also be addressed under this modeling framework. The effectiveness and superiority of JITL-ICA based monitoring method was demonstrated by fed-batch penicillin fermentation.展开更多
The vibration signals of an aeroengine are a very important information source for fault diagnosis and condition monitoring. Considering the nonstationarity and low repeatability of the vibration signals, it is necess...The vibration signals of an aeroengine are a very important information source for fault diagnosis and condition monitoring. Considering the nonstationarity and low repeatability of the vibration signals, it is necessary to find a corresponding method for feature extraction and fault recognition. In this paper, based on Independent Component Analysis （ICA） and the Discrete Hidden Markov Model （DHMM）, a new fault diagnosis approach named ICA-DHMM is proposed. In this method, ICA separates the source signals from the mixed vibration signals and then extracts features from them, DHMM works as a classifier to recognize the conditions of the aeroengine. Compared with the DHMM, which use the amplitude spectrum of mixed signals as feature parameters, experimental results show this method has higher diagnosis accuracy.展开更多
Motionless foreground objects are key targets in applications of home care monitoring and abandoned object detection, and pose a great challenge to foreground detection. Most algorithms incorporate the motionless fore...Motionless foreground objects are key targets in applications of home care monitoring and abandoned object detection, and pose a great challenge to foreground detection. Most algorithms incorporate the motionless foreground objects into their background models because they have to adapt to environmental changes. To overcome this challenge, a foreground detection method based on nonlinear independent component analysis （ICA） was proposed. Considering that each video frame was actually a nonlinear mixture of the background image and the foreground image, the nonlinear ICA was employed to accurately separate the independent components from each frame. Then, the entropy of grayscale image was calculated to classify which resulting independent component was the foreground image. The proposed nonlinear ICA model was trained offiine and this model was not updated online, so the method can cope with the motionless foreground objects. Experimental results demonstrate that, the method achieves remarkable results and outperforms several advanced methods in dealing with the motionless foreground objects.展开更多
Event-related potentials (ERP) is an important type of brain dynamics in human cognition research. However, ERP is often submerged by the spontaneous brain activity EEG, for its relatively tiny scale. Further more, th...Event-related potentials (ERP) is an important type of brain dynamics in human cognition research. However, ERP is often submerged by the spontaneous brain activity EEG, for its relatively tiny scale. Further more, the brain activities collected from scalp electrodes are often inevitably contaminated by several kinds of artifacts, such as blinks, eye movements, muscle noise and power line interference. A new approach to correct these disturbances is presented using independent component analysis (ICA). This technique can effectively detect and extract ERP components from the measured electrodes recordings even if they are heavily contaminated. The results compare favorably to those obtained by parametric modeling. Besides, auto-adaptive projection of decomposed results to ERP components was also given. Through experiments, ICA proves to be highly capable of ERP extraction and S/N ratio improving.展开更多
The fixed-point algorithm and infomax algorithm are two of the most popular algorithms in independent component analysis(ICA).However,it is hard to take both stability and speed into consideration in processing functi...The fixed-point algorithm and infomax algorithm are two of the most popular algorithms in independent component analysis(ICA).However,it is hard to take both stability and speed into consideration in processing functional magnetic resonance imaging(fMRI)data.In this paper,an optimization model for ICA is presented and an improved fixed-point algorithm based on the model is proposed.In the new algorithms a small step size is added to increase the stability.In order to accelerate the convergence,an improvement on Newton method is made,which makes cubic convergence for the new algorithm.Applying the algorithm and two other algorithms to invivo fMRI data,the results show that the new algorithm separates independent components stably,which has faster convergence speed and less computation than the other two algorithms.The algorithm has obvious advantage in processing fMRI signal with huge data.展开更多
Independent component analysis( ICA) has been widely applied to the monitoring of non-Gaussian processes. Despite lots of applications,there is no universally accepted criterion to select the dominant independent comp...Independent component analysis( ICA) has been widely applied to the monitoring of non-Gaussian processes. Despite lots of applications,there is no universally accepted criterion to select the dominant independent components( ICs). Moreover, how to determine the number of dominant ICs is still an open question. To further address this issue,a novel process monitoring based on IC contribution( ICC) is proposed from the perspective of information storage. Based on the ICC with each variable,the dominant ICs can be obtained and the number of dominant ICs is determined objectively. To further preserve the process information, the remaining ICs are not useless. As a result,all the ICs are regarded to be divided into dominant and residual subspaces. The monitoring models are established respectively in each subspace, and then Bayesian inference is applied to integrating monitoring results of the two subspaces. Finally, the feasibility and effectiveness of the proposed method are illustrated through a numerical example and the Tennessee Eastman process.展开更多
目的:为实现从母体腹壁混合信号中提取高信噪比和波形清晰的胎儿心电信号,提出一种融合核主成分分析(kernel principal component analysis,KPCA)、快速独立成分分析(fast independent component analysis,FastICA)及奇异值分解(singula...目的:为实现从母体腹壁混合信号中提取高信噪比和波形清晰的胎儿心电信号,提出一种融合核主成分分析(kernel principal component analysis,KPCA)、快速独立成分分析(fast independent component analysis,FastICA)及奇异值分解(singular value decomposition,SVD)的胎儿心电信号提取算法。方法:首先,采用KPCA对母体心电信号进行降维,再利用改进的基于负熵的FastICA处理降维后的数据,得到独立成分。随后,引入样本熵进行信号通道选择,挑选出包含最多母体信息的信号通道。在选中的母体通道上进行SVD,得到母体心电信号的近似估计,再用腹壁源信号减去该信号得到胎儿心电的初步估计。最后,采用改进的基于负熵的FastICA成功分离出纯净的胎儿心电信号。在腹部和直接胎儿心电图数据库(Abdominal and Direct Fetal Electrocardiogram Database,ADFECGDB)和PhysioNet 2013挑战赛数据库中对提出的算法进行验证。结果:提出的算法在主观视觉效果和客观评价指标上都表现出优越的性能。在ADFECGDB数据库中,胎儿QRS复合波检测的敏感度、阳性预测值和F1值分别为99.74%、98.85%和99.30%;在PhysioNet 2013挑战赛数据库中,胎儿QRS复合波检测的敏感度、阳性预测值和F1值分别为99.10%、97.87%和98.48%。结论:融合KPCA、FastICA及SVD的胎儿心电信号提取算法在提取胎儿心电信号的同时有效处理了附加噪声,为胎儿疾病的早期诊断提供了有力支持。展开更多
基金Supported by the National Scientific Research Fund of China(No.31201133)
文摘The estimation of oil spill coverage is an important part of monitoring of oil spills at sea.The spatial resolution of images collected by airborne hyper-spectral remote sensing limits both the detection of oil spills and the accuracy of estimates of their size.We consider at-sea oil spills with zonal distribution in this paper and improve the traditional independent component analysis algorithm.For each independent component we added two constraint conditions:non-negativity and constant sum.We use priority weighting by higher-order statistics,and then the spectral angle match method to overcome the order nondeterminacy.By these steps,endmembers can be extracted and abundance quantified simultaneously.To examine the coverage of a real oil spill and correct our estimate,a simulation experiment and a real experiment were designed using the algorithm described above.The result indicated that,for the simulation data,the abundance estimation error is 2.52% and minimum root mean square error of the reconstructed image is 0.030 6.We estimated the oil spill rate and area based on eight hyper-spectral remote sensing images collected by an airborne survey of Shandong Changdao in 2011.The total oil spill area was 0.224 km^2,and the oil spill rate was 22.89%.The method we demonstrate in this paper can be used for the automatic monitoring of oil spill coverage rates.It also allows the accurate estimation of the oil spill area.
文摘Independent component analysis （ICA） is the primary statistical method for solving the problems of blind source separation. The fast ICA is a famous and excellent algorithm and its contrast function is optimized by the quadratic convergence of Newton iteration method. In order to improve the convergence speed and the separation precision of the fast ICA, an improved fast ICA algorithm is presented. The algorithm introduces an efficient Newton＇s iterative method with fifth-order convergence for optimizing the contrast function and gives the detail derivation process and the corresponding condition. The experimental results demonstrate that the convergence speed and the separation precision of the improved algorithm are better than that of the fast ICA.
基金Supported by the 973 Project (No.2003CB716106), NSFC (No.90208003, 30200059), TRAPOYT, Doctor Training Fund of MOE, PRC, Key Research Project of Science and Technology of MOE, Fok Ying Tong Education Foundation (No.91041)
文摘One important application of independent component analysis （ICA） is in image processing. A two dimensional （2-D） composite ICA algorithm framework for 2-D image independent component analysis （2-D ICA） is proposed. The 2-D nature of the algorithm provides it an advantage of circumventing the roundabout transforming procedures between two dimensional （2-D） image deta and one-dimensional （l-D） signal. Moreover the combination of the Newton （fixed-point algorithm） and natural gradient algorithms in this composite algorithm increases its efficiency and robustness. The convincing results of a successful example in functional magnetic resonance imaging （fMRI） show the potential application of composite 2-D ICA in the brain activity detection.
基金This project is supported by National Natural Science Foundation of China (No.50275154) Municipal Natural Science Foundation of Chongqing, China (No.8773).
文摘It is an important precondition for machine fault diagnosis that vibrationsignal can be extracted effectively. Based on the characteristic of noise interfused during thecourse of sampling vibration signal, independent component analysis (ICA) method is combined withwavelet to de-noise. Firstly, The sampled signal can be separated with ICA, then the function offrequency band chosen with multi-resolution wavelet transform can be used to judge whether thestochastic disturbance singular signal is interfused. By these ways, the vibration signals can beextracted effectively, which provides favorable condition for subsequent feature detection ofvibration signal and fault diagnosis.
基金Project(217/s/458)supported by Azarbaijan Shahid Madani University,Iran
文摘A statistical signal processing technique was proposed and verified as independent component analysis(ICA) for fault detection and diagnosis of industrial systems without exact and detailed model.Actually,the aim is to utilize system as a black box.The system studied is condenser system of one of MAPNA's power plants.At first,principal component analysis(PCA) approach was applied to reduce the dimensionality of the real acquired data set and to identify the essential and useful ones.Then,the fault sources were diagnosed by ICA technique.The results show that ICA approach is valid and effective for faults detection and diagnosis even in noisy states,and it can distinguish main factors of abnormality among many diverse parts of a power plant's condenser system.This selectivity problem is left unsolved in many plants,because the main factors often become unnoticed by fault expansion through other parts of the plants.
基金Project (No. 50575203) supported by the National Natural ScienceFoundation of China
文摘Independent component analysis was applied to analyze the acoustic signals from diesel engine. First the basic prin-ciple of independent component analysis (ICA) was reviewed. Diesel engine acoustic signal was decomposed into several inde-pendent components (ICs); Fourier transform and continuous wavelet transform (CWT) were applied to analyze the independent components. Different noise sources of the diesel engine were separated, based on the characteristics of different component in time-frequency domain.
基金Funded by the National 863 Program of China (No.2002AA783050)
文摘A small target detection approach based on independent component analysis for hyperspectral data is put forward. In this algorithm, firstly the fast independent component analysis(FICA) is used to collect target information hided in high-dimensional data and projects them into low-dimensional space.Secondly, the feature images are selected with kurtosis .At last, small targets are extracted with histogram image segmentation which has been labeled by skewness.
基金supported by a grant from the national High Technology Research and development Program of China(863 Program)(No.2012AA01A502)National Natural Science Foundation of China(No.61179006)Science and Technology Support Program of Sichuan Province(No.2014GZX0004)
文摘To overcome the inter-carrier interference （ICI） of orthogonal frequency division multiplexing （OFDM） systems subject to unknown carrier frequency offset （CFO） and multipath, this paper develops a blind adaptive interference suppression scheme based on independent component analysis （ICA）. Taking into account statistical independence of subcarriers＇ signals of OFDM, the signal recovery mechanism is investigated to achieve the goal of blind equalization. The received OFDM signals can be considered as the mixed observation signals. The effect of CFO and multipath corresponds to the mixing matrix in the problem of blind source separation （BSS） framework. In this paper, the ICA- based OFDM system model is built, and the proposed ICA-based detector is exploited to extract source signals from the observation of a received mixture based on the assumption of statistical independence between the sources. The blind separation technique can increase spectral efficiency and provide robustness performance against erroneous parameter estimation problem. Theoretical analysis and simulation results show that compared with the conventional pilot-based scheme, the improved performance of OFDM systems is obtained by the proposed ICA-based detection technique.
基金National Natural Science Foundations of China(Nos.61403256,61374132)Special Scientific Research of Selection and Cultivation of Excellent Young Teachers in Shanghai Universities,China(No.YYY11076)
文摘A new method was developed for batch process monitoring in this paper. In the devdopad method, just-in-time learning （ JITL ） and independent component analysis （ICA） were integrated to build JITL-ICA monitoring scheme. JITL was employed to tackle with the characteristics of batch process such as inherent time- varying dynamics, multiple operating phases, and especially the case of uneven length stage. According to new coming test data, the most correlated segmentation was obtained from batch-wise unfolded training data by JITL. Then, ICA served as the principal components extraction approach. Therefore, the non.Gaussian distributed data can also be addressed under this modeling framework. The effectiveness and superiority of JITL-ICA based monitoring method was demonstrated by fed-batch penicillin fermentation.
基金supported by the National Natural Science Foundation of China under Grant No.60672184
文摘The vibration signals of an aeroengine are a very important information source for fault diagnosis and condition monitoring. Considering the nonstationarity and low repeatability of the vibration signals, it is necessary to find a corresponding method for feature extraction and fault recognition. In this paper, based on Independent Component Analysis （ICA） and the Discrete Hidden Markov Model （DHMM）, a new fault diagnosis approach named ICA-DHMM is proposed. In this method, ICA separates the source signals from the mixed vibration signals and then extracts features from them, DHMM works as a classifier to recognize the conditions of the aeroengine. Compared with the DHMM, which use the amplitude spectrum of mixed signals as feature parameters, experimental results show this method has higher diagnosis accuracy.
基金National Natural Science Foundations of China(Nos.61374097,61601108)the Fundamental Research Funds for the Central Universities,China(No.N130423006)the Foundation of Northeastern University at Qinhuangdao,China(No.XNK201403)
文摘Motionless foreground objects are key targets in applications of home care monitoring and abandoned object detection, and pose a great challenge to foreground detection. Most algorithms incorporate the motionless foreground objects into their background models because they have to adapt to environmental changes. To overcome this challenge, a foreground detection method based on nonlinear independent component analysis （ICA） was proposed. Considering that each video frame was actually a nonlinear mixture of the background image and the foreground image, the nonlinear ICA was employed to accurately separate the independent components from each frame. Then, the entropy of grayscale image was calculated to classify which resulting independent component was the foreground image. The proposed nonlinear ICA model was trained offiine and this model was not updated online, so the method can cope with the motionless foreground objects. Experimental results demonstrate that, the method achieves remarkable results and outperforms several advanced methods in dealing with the motionless foreground objects.
文摘Event-related potentials (ERP) is an important type of brain dynamics in human cognition research. However, ERP is often submerged by the spontaneous brain activity EEG, for its relatively tiny scale. Further more, the brain activities collected from scalp electrodes are often inevitably contaminated by several kinds of artifacts, such as blinks, eye movements, muscle noise and power line interference. A new approach to correct these disturbances is presented using independent component analysis (ICA). This technique can effectively detect and extract ERP components from the measured electrodes recordings even if they are heavily contaminated. The results compare favorably to those obtained by parametric modeling. Besides, auto-adaptive projection of decomposed results to ERP components was also given. Through experiments, ICA proves to be highly capable of ERP extraction and S/N ratio improving.
文摘The fixed-point algorithm and infomax algorithm are two of the most popular algorithms in independent component analysis(ICA).However,it is hard to take both stability and speed into consideration in processing functional magnetic resonance imaging(fMRI)data.In this paper,an optimization model for ICA is presented and an improved fixed-point algorithm based on the model is proposed.In the new algorithms a small step size is added to increase the stability.In order to accelerate the convergence,an improvement on Newton method is made,which makes cubic convergence for the new algorithm.Applying the algorithm and two other algorithms to invivo fMRI data,the results show that the new algorithm separates independent components stably,which has faster convergence speed and less computation than the other two algorithms.The algorithm has obvious advantage in processing fMRI signal with huge data.
基金National Natural Science Foundations of China(Nos.61374140,61403072,61673173)Fundamental Research Funds for the Central Universities,China(Nos.222201717006,222201714031)
文摘Independent component analysis( ICA) has been widely applied to the monitoring of non-Gaussian processes. Despite lots of applications,there is no universally accepted criterion to select the dominant independent components( ICs). Moreover, how to determine the number of dominant ICs is still an open question. To further address this issue,a novel process monitoring based on IC contribution( ICC) is proposed from the perspective of information storage. Based on the ICC with each variable,the dominant ICs can be obtained and the number of dominant ICs is determined objectively. To further preserve the process information, the remaining ICs are not useless. As a result,all the ICs are regarded to be divided into dominant and residual subspaces. The monitoring models are established respectively in each subspace, and then Bayesian inference is applied to integrating monitoring results of the two subspaces. Finally, the feasibility and effectiveness of the proposed method are illustrated through a numerical example and the Tennessee Eastman process.
文摘目的:为实现从母体腹壁混合信号中提取高信噪比和波形清晰的胎儿心电信号,提出一种融合核主成分分析(kernel principal component analysis,KPCA)、快速独立成分分析(fast independent component analysis,FastICA)及奇异值分解(singular value decomposition,SVD)的胎儿心电信号提取算法。方法:首先,采用KPCA对母体心电信号进行降维,再利用改进的基于负熵的FastICA处理降维后的数据,得到独立成分。随后,引入样本熵进行信号通道选择,挑选出包含最多母体信息的信号通道。在选中的母体通道上进行SVD,得到母体心电信号的近似估计,再用腹壁源信号减去该信号得到胎儿心电的初步估计。最后,采用改进的基于负熵的FastICA成功分离出纯净的胎儿心电信号。在腹部和直接胎儿心电图数据库(Abdominal and Direct Fetal Electrocardiogram Database,ADFECGDB)和PhysioNet 2013挑战赛数据库中对提出的算法进行验证。结果:提出的算法在主观视觉效果和客观评价指标上都表现出优越的性能。在ADFECGDB数据库中,胎儿QRS复合波检测的敏感度、阳性预测值和F1值分别为99.74%、98.85%和99.30%;在PhysioNet 2013挑战赛数据库中,胎儿QRS复合波检测的敏感度、阳性预测值和F1值分别为99.10%、97.87%和98.48%。结论:融合KPCA、FastICA及SVD的胎儿心电信号提取算法在提取胎儿心电信号的同时有效处理了附加噪声,为胎儿疾病的早期诊断提供了有力支持。
