The repeated volume variation of lithium(Li)metal anode(LMA)upon Li^(+) plating/stripping,the volatile interface between Li and the electrolyte,and the incessant growth of Li dendrites on Li metal surface have severel...The repeated volume variation of lithium(Li)metal anode(LMA)upon Li^(+) plating/stripping,the volatile interface between Li and the electrolyte,and the incessant growth of Li dendrites on Li metal surface have severely hindered the practical application of Li in constructing high energy-density Li metal batteries(LMBs).Herein,a novel Li host(3D ZnO/CNTs/Cu)featuring ordered microchannels and lithiophilic ZnO species on the inner walls of the microchannels is introduced,which induces the uniform Li^(+) deposition into the microchannels and finally suppresses the formation of Li dendrites.The stable structure of the fabricated 3D Li host can adapt to volume variations upon Li^(+) plating/stripping,thereby enhancing electrochemical performances.Symmetric cells with the 3D ZnO/CNTs/Cu@Li anode exhibited long cycle stability at areal current densities of 0.5 and 2 mA cm^(-2);Full cells maintained a reversible discharge capacity of 105 mAh g^(-1) after 400 cycles at 1C with a capacity retention of 70%.Meanwhile,ex-situ SEM observations proved that the 3D ZnO/CNTs/Cu@Li anode can keep the structural integrity during charging/discharging(or plating/stripping).This work suggested that lithiophilic nanochannels in the Li host can significantly improve the electrochemical performance and safety of LMBs.展开更多
A series of tungstate red phosphors K_(1-x)Li_(x)Eu(WO_(4))_(2-y)(SO_(4))_(y)were successfully prepared by sol-gel method,and the effects of the introduction of Li^(+)and SO_(4)^(2-)on the fluorescence intensity and t...A series of tungstate red phosphors K_(1-x)Li_(x)Eu(WO_(4))_(2-y)(SO_(4))_(y)were successfully prepared by sol-gel method,and the effects of the introduction of Li^(+)and SO_(4)^(2-)on the fluorescence intensity and thermal quenching properties of the prepared K_(1-x)Li_(x)Eu(WO_(4))_(2-y)(SO_(4))_(y)phosphors were investigated.The X-ray diffraction data show that the prepared(Li^(+)and SO_(4)^(2-))-doped KEu(WO_(4))_(2)phosphors have a monoclinic tetragonal structure.In addition,the emission intensities of all the observed emission peaks change significantly with the increase of Li~+doping concentration,especially the intensity of the emission peaks at 615 nm fluctuated significantly and reached the maximum at x=0.3 and y=0.2.The K_(1-x)Li_(x)Eu(WO_(4))_(2-y)(SO_(4))_(y)phosphors are found to have the highest fluorescence intensity at x=0.3 and y=0.2.Moreover,the K_(0.7)Li_(0.3)Eu(WO_(4))_(1.8)(SO_(4))_(0.2)phosphor has better thermal quenching properties and luminescence efficiency,and the experimental results indicates that the fluorescence intensity and thermal burst performance of KEu(WO_(4))_(2)red phosphor could be effectively improved by using low-cost bionic doping of Li^(+)and SO_(4)^(2-).展开更多
基金supported by the Science Foundation of Zhejiang Sci-Tech University(18062299-Y)。
文摘The repeated volume variation of lithium(Li)metal anode(LMA)upon Li^(+) plating/stripping,the volatile interface between Li and the electrolyte,and the incessant growth of Li dendrites on Li metal surface have severely hindered the practical application of Li in constructing high energy-density Li metal batteries(LMBs).Herein,a novel Li host(3D ZnO/CNTs/Cu)featuring ordered microchannels and lithiophilic ZnO species on the inner walls of the microchannels is introduced,which induces the uniform Li^(+) deposition into the microchannels and finally suppresses the formation of Li dendrites.The stable structure of the fabricated 3D Li host can adapt to volume variations upon Li^(+) plating/stripping,thereby enhancing electrochemical performances.Symmetric cells with the 3D ZnO/CNTs/Cu@Li anode exhibited long cycle stability at areal current densities of 0.5 and 2 mA cm^(-2);Full cells maintained a reversible discharge capacity of 105 mAh g^(-1) after 400 cycles at 1C with a capacity retention of 70%.Meanwhile,ex-situ SEM observations proved that the 3D ZnO/CNTs/Cu@Li anode can keep the structural integrity during charging/discharging(or plating/stripping).This work suggested that lithiophilic nanochannels in the Li host can significantly improve the electrochemical performance and safety of LMBs.
基金Funded by the Science and Technology Bureau of Chengdu City(No.2022-YF05-02119-SN)。
文摘A series of tungstate red phosphors K_(1-x)Li_(x)Eu(WO_(4))_(2-y)(SO_(4))_(y)were successfully prepared by sol-gel method,and the effects of the introduction of Li^(+)and SO_(4)^(2-)on the fluorescence intensity and thermal quenching properties of the prepared K_(1-x)Li_(x)Eu(WO_(4))_(2-y)(SO_(4))_(y)phosphors were investigated.The X-ray diffraction data show that the prepared(Li^(+)and SO_(4)^(2-))-doped KEu(WO_(4))_(2)phosphors have a monoclinic tetragonal structure.In addition,the emission intensities of all the observed emission peaks change significantly with the increase of Li~+doping concentration,especially the intensity of the emission peaks at 615 nm fluctuated significantly and reached the maximum at x=0.3 and y=0.2.The K_(1-x)Li_(x)Eu(WO_(4))_(2-y)(SO_(4))_(y)phosphors are found to have the highest fluorescence intensity at x=0.3 and y=0.2.Moreover,the K_(0.7)Li_(0.3)Eu(WO_(4))_(1.8)(SO_(4))_(0.2)phosphor has better thermal quenching properties and luminescence efficiency,and the experimental results indicates that the fluorescence intensity and thermal burst performance of KEu(WO_(4))_(2)red phosphor could be effectively improved by using low-cost bionic doping of Li^(+)and SO_(4)^(2-).
