Porous sol-gel glass of CaO-SiO2-P2O5 system with macropores larger than 100 μm was prepared by adding stearic acid as pore former when the sintering was carried out at 700 ℃ for 3h.The sol-gel porous glass shows an...Porous sol-gel glass of CaO-SiO2-P2O5 system with macropores larger than 100 μm was prepared by adding stearic acid as pore former when the sintering was carried out at 700 ℃ for 3h.The sol-gel porous glass shows an amorphous structure. The diameter of the pore created by pore former varies from 100 to 300 μm, and macroporous glass has a narrow and small pore size distribution in mesoporous scale. The porosity and pore size of macroporous bioactive glass can be controlled.展开更多
A set of evaluation indicators based on corrosion ratio in theory for assessing the extent of pitting corrosion and performance reduction are proposed. In order to quantify the morphology of pitting corrosion and extr...A set of evaluation indicators based on corrosion ratio in theory for assessing the extent of pitting corrosion and performance reduction are proposed. In order to quantify the morphology of pitting corrosion and extract the evaluation indicators,the 3D profile data obtained by pitting morphology measurement are imported into a special written program to automatically determine the location of each corrosion pit and distill any desired data pertinent to the pitting morphology. The results show that this method seems to be effective to analyze the corroded surface and characterize the pitting morphology.展开更多
Magnesium and its alloys offer lightweight advantage and have extensive development prospects,particularly in aerospace.However,their flammability poses a significant barrier on the development of Mg alloys.The igniti...Magnesium and its alloys offer lightweight advantage and have extensive development prospects,particularly in aerospace.However,their flammability poses a significant barrier on the development of Mg alloys.The ignition resistance of these alloys often depends on the protectiveness of the oxide film formed on the surface.This paper elucidates the formation mechanism of oxide film from thermodynamics and kinetics,classifying oxide films based on their layered structure to assess their protective properties.Furthermore,it comprehensively reviews the impact of characteristics on the protective effectiveness such as compactness,continuity,thickness,and mechanical properties.The paper also introduces various characterization methods for the microstructure and properties of oxide film.The primary objective of this paper is to enhance the comprehension of oxide film concerning the ignition resistance of Mg alloys and to furnish references for future advancements and research in Mg alloys with heightened ignition resistance.展开更多
A multiple monopole （or multipole） method based on the generalized mul- tipole technique （GMT） is proposed to calculate the band structures of scalar waves in two-dimensional phononic crystals which are composed o...A multiple monopole （or multipole） method based on the generalized mul- tipole technique （GMT） is proposed to calculate the band structures of scalar waves in two-dimensional phononic crystals which are composed of arbitrarily shaped cylinders embedded in a host medium. In order to find the eigenvalues of the problem, besides the sources used to expand the wave field, an extra monopole source is introduced which acts as the external excitation. By varying the frequency of the excitation, the eigenvalues can be localized as the extreme points of an appropriately chosen function. By sweeping the frequency range of interest and sweeping the boundary of the irreducible first Brillouin zone, the band structure is obtained. Some numerical examples are presented to validate the proposed method.展开更多
The development and utilization of renewable clean energy can effectively solve the two major problems of energy and environment. As an efficient power generation device that converts hydrogen energy into electric ene...The development and utilization of renewable clean energy can effectively solve the two major problems of energy and environment. As an efficient power generation device that converts hydrogen energy into electric energy, fuel cell has attracted more and more attention. For fuel cells, the oxygen reduction reaction(ORR) at the cathode is the core reaction, and the design and development of high-performance ORR catalysts remain quite challenging. Since the microenvironment of the active center of single atom catalysts(SACs) has an important influence on its catalytic performance, it has been a research focus to improve the ORR activity and stability of electrocatalysts by adjusting the structure of the active center through reasonable structural regulation methods. In this review, we reviewed the preparation and structure–activity relationship of SACs for ORR. Then, the structural precision regulation methods for improving the activity and stability of ORR electrocatalysts are discussed. And the advanced in-situ characterization techniques for revealing the changes of active sites in the electrocatalytic ORR process are summarized. Finally, the challenges and future design directions of SACs for ORR are discussed. This work will provide important reference value for the design and synthesis of SACs with high activity and stability for ORR.展开更多
The virtual laminated element method (VLEM) can resolve structural shap e optimization problems with a new method. According to the characteristics of V LEM , only some characterized layer thickness values need be def...The virtual laminated element method (VLEM) can resolve structural shap e optimization problems with a new method. According to the characteristics of V LEM , only some characterized layer thickness values need be defined as design v ariables instead of boundary node coordinates or some other parameters determini ng the system boundary. One of the important features of this method is that it is not necessary to regenerate the FE(finite element) grid during the optimizati on process so as to avoid optimization failures resulting from some distortion grid elements. Th e thickness distribution in thin plate optimization problems in other studies be fore is of stepped shape. However, in this paper, a continuous thickness distrib ution can be obtained after optimization using VLEM, and is more reasonable. Fur thermore, an approximate reanalysis method named ″behavior model technique″ ca n be used to reduce the amount of structural reanalysis. Some typical examples are offered to prove the effectiveness and practicality of the proposed method.展开更多
The perturbation method and finite strip method are combined to solve the large deflection bending problems of rectangular plates. Perturbation method is used to reduce the nonlinear differential equations into a seri...The perturbation method and finite strip method are combined to solve the large deflection bending problems of rectangular plates. Perturbation method is used to reduce the nonlinear differential equations into a series of linear differential equations. The finite strip method is then employed to tackle these linear equations. Some calculation examples are compared with those got by other methods.展开更多
Considering that copper mine tailings(CMTs)are commonly mixed with ordinary Portland cement,fly ash(FA),and kaolin to produce geopolymers,to make full use of CMTs,the properties of geopolymers manufactured under diffe...Considering that copper mine tailings(CMTs)are commonly mixed with ordinary Portland cement,fly ash(FA),and kaolin to produce geopolymers,to make full use of CMTs,the properties of geopolymers manufactured under different material mass ratios and curing methods(standard curing,water bath curing,and 60℃curing)are evaluated with significantly increased dosage of CMTs.Porosity and unconfined compressive strength tests,X-ray diffraction,field emission scanning electron microscopy,and energy dispersive spectroscopy are used to determine the physical and mechanical properties,microstructure,and mineral composition of geopolymers.Finally,costs and CO 2 emissions of specimens with different material mass ratios during the preparation processes are compared.The results show that during the geopolymerization of low-calcium materials,various geopolymer gels,including calcium silicate,calcium silicoaluminate,and mainly sodium silicoaluminate gels,coexist.The solid waste,cost,and carbon dioxide emission reductions can reach 100%,166.3 yuan/t,and 73.3 kg/t,respectively.Under a curing condition of 60℃,the sample with a CMTs mass fraction of 70%and an FA mass fraction of 30%meets the requirements of porosity,compressive strength.The resource utilization of CMT and FA is realized in a more economical way.展开更多
This thorough review explores the complexities of geotechnical engineering, emphasizing soil-structure interaction (SSI). The investigation centers on sheet pile design, examining two primary methodologies: Limit Equi...This thorough review explores the complexities of geotechnical engineering, emphasizing soil-structure interaction (SSI). The investigation centers on sheet pile design, examining two primary methodologies: Limit Equilibrium Methods (LEM) and Soil-Structure Interaction Methods (SSIM). While LEM methods, grounded in classical principles, provide valuable insights for preliminary design considerations, they may encounter limitations in addressing real-world complexities. In contrast, SSIM methods, including the SSI-SR approach, introduce precision and depth to the field. By employing numerical techniques such as Finite Element (FE) and Finite Difference (FD) analyses, these methods enable engineers to navigate the dynamics of soil-structure interaction. The exploration extends to SSI-FE, highlighting its essential role in civil engineering. By integrating Finite Element analysis with considerations for soil-structure interaction, the SSI-FE method offers a holistic understanding of how structures dynamically interact with their geotechnical environment. Throughout this exploration, the study dissects critical components governing SSIM methods, providing engineers with tools to navigate the intricate landscape of geotechnical design. The study acknowledges the significance of the Mohr-Coulomb constitutive model while recognizing its limitations, and guiding practitioners toward informed decision-making in geotechnical analyses. As the article concludes, it underscores the importance of continuous learning and innovation for the future of geotechnical engineering. With advancing technology and an evolving understanding of soil-structure interaction, the study remains committed to ensuring the safety, stability, and efficiency of geotechnical structures through cutting-edge design and analysis techniques.展开更多
At present,blast furnace ironmaking is still the main process for producing molten iron,and sinters are the main raw material for blast furnace ironmaking.A sinter with good metallurgical performance can not only ensu...At present,blast furnace ironmaking is still the main process for producing molten iron,and sinters are the main raw material for blast furnace ironmaking.A sinter with good metallurgical performance can not only ensure smooth operation of the blast furnace but also reduce the blast furnace fuel ratio and increase the molten iron production.Structure is the most important factor affecting the metallurgical properties of the sinter.Thus,the research progress of sinter pore and mineral phase structures was reviewed and the mechanism by which they influence sinter properties was expounded.Multiscale characterization methods for the sinter and their advantages and disadvantages were introduced,and the future research direction of sinter was discussed.展开更多
Aircrafts damages caused by lightning strikes have been known since the early days of aviation.However,the physical effects on the aircraft structure are still being investigated.This work seeks to evaluate the lightn...Aircrafts damages caused by lightning strikes have been known since the early days of aviation.However,the physical effects on the aircraft structure are still being investigated.This work seeks to evaluate the lightning strike effects in the aluminum alloy 7075-T6.Samples were submitted to lightning strike simulation in laboratory and the damages evaluated through characterization techniques.Ultrasound and profilometry tests have shown material loss to 0.272 mm depth in the damaged region.In addition,it was detected the material accumulation occurrence in the damage vicinity of the region.Below the damage,it was found a region where metallurgical changes were identified.The tensile and microhardness tests results have shown reduction in the percentage elongation and hardness increasing in the material affected by lightning.These results are corroborated by the X-Ray Diffraction(XRD)and Rietveld Method(red line)that indicated an increasing in dislocation density and micro-deformation in the material matrix.Optical microscopy results have shown the presence of microcracks on the normal and cross-section surface of the samples damaged.The Energy Dispersive X-Ray Spectroscopy(EDXS)and Electron Backscattered Diffraction Test(EBSD)found coarse intermetallic phases and precipitates compounds with dimensions greater than 1 lm in length.They were responsible for nucleation of the microcracks that propagate along the material grain boundaries.展开更多
On the arrival of the 20 th anniversary of the journal,Research in Astronomy and Astrophysics(RAA),we see rapid progress in the frontiers of astronomy and astrophysics.To celebrate the birth and growth of RAA,a specia...On the arrival of the 20 th anniversary of the journal,Research in Astronomy and Astrophysics(RAA),we see rapid progress in the frontiers of astronomy and astrophysics.To celebrate the birth and growth of RAA,a special issue consisting of 11 invited reviews from more than 30 authors,mainly from China,has been organized.This is the second volume of the special issues entitled Frontiers in Astrophysics published in RAA.The publication aims at evaluating the current status and key progress in some frontier areas of astronomy and astrophysics with a spirit of guiding future studies.展开更多
Based on the transfer matrix method and the virtual source simulation technique, this paper proposes a novel semi-analytical and semi-numerical method for solving 2-D sound- structure interaction problems under a harm...Based on the transfer matrix method and the virtual source simulation technique, this paper proposes a novel semi-analytical and semi-numerical method for solving 2-D sound- structure interaction problems under a harmonic excitation.Within any integration segment, as long as its length is small enough,along the circumferential curvilinear coordinate,the non- homogeneous matrix differential equation of an elastic ring of complex geometrical shape can be rewritten in terms of the homogeneous one by the method of extended homogeneous capacity proposed in this paper.For the exterior fluid domain,the multi-circular virtual source simulation technique is adopted.The source density distributed on each virtual circular curve may be ex- panded as the Fourier's series.Combining with the inverse fast Fourier transformation,a higher accuracy and efficiency method for solving 2-D exterior Helmholtz's problems is presented in this paper.In the aspect of solution to the coupling equations,the state vectors of elastic ring induced by the given harmonic excitation and generalized forces of coefficients of the Fourier series can be obtained respectively by using a high precision integration scheme combined with the method of extended homogeneous capacity put forward in this paper.According to the superposition princi- ple and compatibility conditions at the interface between the elastic ring and fluid,the algebraic equation of system can be directly constructed by using the least square approximation.Examples of acoustic radiation from two typical fluid-loaded elastic rings under a harmonic concentrated force are presented.Numerical results show that the method proposed is more efficient than the mixed FE-BE method in common use.展开更多
基金Project(50174059) supported by the National Natural Science Foundation of China
文摘Porous sol-gel glass of CaO-SiO2-P2O5 system with macropores larger than 100 μm was prepared by adding stearic acid as pore former when the sintering was carried out at 700 ℃ for 3h.The sol-gel porous glass shows an amorphous structure. The diameter of the pore created by pore former varies from 100 to 300 μm, and macroporous glass has a narrow and small pore size distribution in mesoporous scale. The porosity and pore size of macroporous bioactive glass can be controlled.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51378417)Program for Changjiang Scholars and Innovative Research Team in University(IRT13089)PhD Innovation Fund of Xi'an University of Architecture and Technology
文摘A set of evaluation indicators based on corrosion ratio in theory for assessing the extent of pitting corrosion and performance reduction are proposed. In order to quantify the morphology of pitting corrosion and extract the evaluation indicators,the 3D profile data obtained by pitting morphology measurement are imported into a special written program to automatically determine the location of each corrosion pit and distill any desired data pertinent to the pitting morphology. The results show that this method seems to be effective to analyze the corroded surface and characterize the pitting morphology.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFB3501002)the National Natural Science Foundation of China(Grant No.52301059,No.52271009)the Shanghai Post-doctoral Excellence Program(Grant No.2023372).
文摘Magnesium and its alloys offer lightweight advantage and have extensive development prospects,particularly in aerospace.However,their flammability poses a significant barrier on the development of Mg alloys.The ignition resistance of these alloys often depends on the protectiveness of the oxide film formed on the surface.This paper elucidates the formation mechanism of oxide film from thermodynamics and kinetics,classifying oxide films based on their layered structure to assess their protective properties.Furthermore,it comprehensively reviews the impact of characteristics on the protective effectiveness such as compactness,continuity,thickness,and mechanical properties.The paper also introduces various characterization methods for the microstructure and properties of oxide film.The primary objective of this paper is to enhance the comprehension of oxide film concerning the ignition resistance of Mg alloys and to furnish references for future advancements and research in Mg alloys with heightened ignition resistance.
基金supported by the National Natural Science Foundation of China(Nos.51178037 and10632020)the German Research Foundation(DFG)(Nos.ZH 15/11-1 and ZH 15/16-1)+1 种基金the International Bureau of the German Federal Ministry of Education and Research(BMBF)(No.CHN11/045)the National Basic Research Program of China(No.2010CB732104)
文摘A multiple monopole （or multipole） method based on the generalized mul- tipole technique （GMT） is proposed to calculate the band structures of scalar waves in two-dimensional phononic crystals which are composed of arbitrarily shaped cylinders embedded in a host medium. In order to find the eigenvalues of the problem, besides the sources used to expand the wave field, an extra monopole source is introduced which acts as the external excitation. By varying the frequency of the excitation, the eigenvalues can be localized as the extreme points of an appropriately chosen function. By sweeping the frequency range of interest and sweeping the boundary of the irreducible first Brillouin zone, the band structure is obtained. Some numerical examples are presented to validate the proposed method.
基金supported by the National Natural Science Foundation of China(Grant No.22108306)the Taishan Scholars Program of Shandong Province(Grant No.tsqn201909065)the Shandong Provincial Natural Science Foundation(Grant Nos.ZR2021YQ15,ZR2020QB174)。
文摘The development and utilization of renewable clean energy can effectively solve the two major problems of energy and environment. As an efficient power generation device that converts hydrogen energy into electric energy, fuel cell has attracted more and more attention. For fuel cells, the oxygen reduction reaction(ORR) at the cathode is the core reaction, and the design and development of high-performance ORR catalysts remain quite challenging. Since the microenvironment of the active center of single atom catalysts(SACs) has an important influence on its catalytic performance, it has been a research focus to improve the ORR activity and stability of electrocatalysts by adjusting the structure of the active center through reasonable structural regulation methods. In this review, we reviewed the preparation and structure–activity relationship of SACs for ORR. Then, the structural precision regulation methods for improving the activity and stability of ORR electrocatalysts are discussed. And the advanced in-situ characterization techniques for revealing the changes of active sites in the electrocatalytic ORR process are summarized. Finally, the challenges and future design directions of SACs for ORR are discussed. This work will provide important reference value for the design and synthesis of SACs with high activity and stability for ORR.
文摘The virtual laminated element method (VLEM) can resolve structural shap e optimization problems with a new method. According to the characteristics of V LEM , only some characterized layer thickness values need be defined as design v ariables instead of boundary node coordinates or some other parameters determini ng the system boundary. One of the important features of this method is that it is not necessary to regenerate the FE(finite element) grid during the optimizati on process so as to avoid optimization failures resulting from some distortion grid elements. Th e thickness distribution in thin plate optimization problems in other studies be fore is of stepped shape. However, in this paper, a continuous thickness distrib ution can be obtained after optimization using VLEM, and is more reasonable. Fur thermore, an approximate reanalysis method named ″behavior model technique″ ca n be used to reduce the amount of structural reanalysis. Some typical examples are offered to prove the effectiveness and practicality of the proposed method.
文摘The perturbation method and finite strip method are combined to solve the large deflection bending problems of rectangular plates. Perturbation method is used to reduce the nonlinear differential equations into a series of linear differential equations. The finite strip method is then employed to tackle these linear equations. Some calculation examples are compared with those got by other methods.
基金The National Natural Science Foundation of China(No.41877240)Scientific Research Foundation of Graduate School of Southeast University(No.YBPY1930).
文摘Considering that copper mine tailings(CMTs)are commonly mixed with ordinary Portland cement,fly ash(FA),and kaolin to produce geopolymers,to make full use of CMTs,the properties of geopolymers manufactured under different material mass ratios and curing methods(standard curing,water bath curing,and 60℃curing)are evaluated with significantly increased dosage of CMTs.Porosity and unconfined compressive strength tests,X-ray diffraction,field emission scanning electron microscopy,and energy dispersive spectroscopy are used to determine the physical and mechanical properties,microstructure,and mineral composition of geopolymers.Finally,costs and CO 2 emissions of specimens with different material mass ratios during the preparation processes are compared.The results show that during the geopolymerization of low-calcium materials,various geopolymer gels,including calcium silicate,calcium silicoaluminate,and mainly sodium silicoaluminate gels,coexist.The solid waste,cost,and carbon dioxide emission reductions can reach 100%,166.3 yuan/t,and 73.3 kg/t,respectively.Under a curing condition of 60℃,the sample with a CMTs mass fraction of 70%and an FA mass fraction of 30%meets the requirements of porosity,compressive strength.The resource utilization of CMT and FA is realized in a more economical way.
文摘This thorough review explores the complexities of geotechnical engineering, emphasizing soil-structure interaction (SSI). The investigation centers on sheet pile design, examining two primary methodologies: Limit Equilibrium Methods (LEM) and Soil-Structure Interaction Methods (SSIM). While LEM methods, grounded in classical principles, provide valuable insights for preliminary design considerations, they may encounter limitations in addressing real-world complexities. In contrast, SSIM methods, including the SSI-SR approach, introduce precision and depth to the field. By employing numerical techniques such as Finite Element (FE) and Finite Difference (FD) analyses, these methods enable engineers to navigate the dynamics of soil-structure interaction. The exploration extends to SSI-FE, highlighting its essential role in civil engineering. By integrating Finite Element analysis with considerations for soil-structure interaction, the SSI-FE method offers a holistic understanding of how structures dynamically interact with their geotechnical environment. Throughout this exploration, the study dissects critical components governing SSIM methods, providing engineers with tools to navigate the intricate landscape of geotechnical design. The study acknowledges the significance of the Mohr-Coulomb constitutive model while recognizing its limitations, and guiding practitioners toward informed decision-making in geotechnical analyses. As the article concludes, it underscores the importance of continuous learning and innovation for the future of geotechnical engineering. With advancing technology and an evolving understanding of soil-structure interaction, the study remains committed to ensuring the safety, stability, and efficiency of geotechnical structures through cutting-edge design and analysis techniques.
基金The authors acknowledge the financial support from the National Natural Science Foundation of China(51474164,U1760101 and 51704216).
文摘At present,blast furnace ironmaking is still the main process for producing molten iron,and sinters are the main raw material for blast furnace ironmaking.A sinter with good metallurgical performance can not only ensure smooth operation of the blast furnace but also reduce the blast furnace fuel ratio and increase the molten iron production.Structure is the most important factor affecting the metallurgical properties of the sinter.Thus,the research progress of sinter pore and mineral phase structures was reviewed and the mechanism by which they influence sinter properties was expounded.Multiscale characterization methods for the sinter and their advantages and disadvantages were introduced,and the future research direction of sinter was discussed.
文摘Aircrafts damages caused by lightning strikes have been known since the early days of aviation.However,the physical effects on the aircraft structure are still being investigated.This work seeks to evaluate the lightning strike effects in the aluminum alloy 7075-T6.Samples were submitted to lightning strike simulation in laboratory and the damages evaluated through characterization techniques.Ultrasound and profilometry tests have shown material loss to 0.272 mm depth in the damaged region.In addition,it was detected the material accumulation occurrence in the damage vicinity of the region.Below the damage,it was found a region where metallurgical changes were identified.The tensile and microhardness tests results have shown reduction in the percentage elongation and hardness increasing in the material affected by lightning.These results are corroborated by the X-Ray Diffraction(XRD)and Rietveld Method(red line)that indicated an increasing in dislocation density and micro-deformation in the material matrix.Optical microscopy results have shown the presence of microcracks on the normal and cross-section surface of the samples damaged.The Energy Dispersive X-Ray Spectroscopy(EDXS)and Electron Backscattered Diffraction Test(EBSD)found coarse intermetallic phases and precipitates compounds with dimensions greater than 1 lm in length.They were responsible for nucleation of the microcracks that propagate along the material grain boundaries.
文摘On the arrival of the 20 th anniversary of the journal,Research in Astronomy and Astrophysics(RAA),we see rapid progress in the frontiers of astronomy and astrophysics.To celebrate the birth and growth of RAA,a special issue consisting of 11 invited reviews from more than 30 authors,mainly from China,has been organized.This is the second volume of the special issues entitled Frontiers in Astrophysics published in RAA.The publication aims at evaluating the current status and key progress in some frontier areas of astronomy and astrophysics with a spirit of guiding future studies.
基金Project supported by the National Natural Science Foundation of China (No.10172038)
文摘Based on the transfer matrix method and the virtual source simulation technique, this paper proposes a novel semi-analytical and semi-numerical method for solving 2-D sound- structure interaction problems under a harmonic excitation.Within any integration segment, as long as its length is small enough,along the circumferential curvilinear coordinate,the non- homogeneous matrix differential equation of an elastic ring of complex geometrical shape can be rewritten in terms of the homogeneous one by the method of extended homogeneous capacity proposed in this paper.For the exterior fluid domain,the multi-circular virtual source simulation technique is adopted.The source density distributed on each virtual circular curve may be ex- panded as the Fourier's series.Combining with the inverse fast Fourier transformation,a higher accuracy and efficiency method for solving 2-D exterior Helmholtz's problems is presented in this paper.In the aspect of solution to the coupling equations,the state vectors of elastic ring induced by the given harmonic excitation and generalized forces of coefficients of the Fourier series can be obtained respectively by using a high precision integration scheme combined with the method of extended homogeneous capacity put forward in this paper.According to the superposition princi- ple and compatibility conditions at the interface between the elastic ring and fluid,the algebraic equation of system can be directly constructed by using the least square approximation.Examples of acoustic radiation from two typical fluid-loaded elastic rings under a harmonic concentrated force are presented.Numerical results show that the method proposed is more efficient than the mixed FE-BE method in common use.
