This paper proposes a residue based open-loop modal analysis method to detect low frequency modal resonance(LFMR),including asymmetric low frequency modal attraction(ALFMA)and asymmetric low frequency modal repulsion(...This paper proposes a residue based open-loop modal analysis method to detect low frequency modal resonance(LFMR),including asymmetric low frequency modal attraction(ALFMA)and asymmetric low frequency modal repulsion(ALFMR),of permanent magnetic synchronous generator based wind farms(PMSG-WFs)penetrated power systems.The formation of ALFMA and ALFMR caused by two open-loop low frequency oscillation(LFO)modes moving close and apart is analyzed in detail.Via predicting the trajectories of closed-loop LFO modes based on calculation of residue of open-loop LFO modes,both ALFMA and ALFMR can be detected.The proposed method can select LFO modes which move to the right half complex plane as control parameters vary.Simulation studies are carried out on a three-machine power system and a four-machine 11-bus power system to verify the properties of the proposed method.展开更多
The chassis frame of a heavy lectra haul is analysed by both modal experiment method and finite element method (FEM ) . The first ten order modal parameters of the chassis frame have been obtained satisfactorily. Thes...The chassis frame of a heavy lectra haul is analysed by both modal experiment method and finite element method (FEM ) . The first ten order modal parameters of the chassis frame have been obtained satisfactorily. These parameters have important reference value in designing the chassis frame properly and provide a necessary basis for the fault diagnostics of the truck.展开更多
The kinetic model of the four-post-frame lifting mechanical system was established. The stiffness and damping matrices of differential equations of motion were obtained by using Lagrange’s equations. And the dynamic ...The kinetic model of the four-post-frame lifting mechanical system was established. The stiffness and damping matrices of differential equations of motion were obtained by using Lagrange’s equations. And the dynamic characteristics of system were analyzed by modal analysis method. Based upon this, the modifications of structural parameters which can improve dynamic performance were discussed. The low-level high-speed palletizer MDJ1200L was taken as a real case in the paper.展开更多
Based on the background of achieving carbon peaking and carbon neutrality, the development and application of new high-power compressors, electric grid drilling RIGS and electric fracturing pump system provide new equ...Based on the background of achieving carbon peaking and carbon neutrality, the development and application of new high-power compressors, electric grid drilling RIGS and electric fracturing pump system provide new equipment support for the electric, green and intelligent development of shale gas fields in China. However, the harmonic pollution of shale gas grid becomes more serious due to the converter and frequency conversion device in the system, which easily causes harmonic resonance problem. Therefore, the harmonic resonance of shale gas grid is comprehensively analyzed and treated. Firstly, the working mechanism of compressor, electric drilling RIGS of the harmonic impedance model of electric fracturing pump system is established. Secondly, the main research methods of harmonic resonance analysis are introduced, and the basic principle of modal analysis is explained. Modal analysis method was used to analyze. Finally, harmonic resonance is suppressed. The results show that there may be multiple resonant frequency points in the distribution network changes, but these changes are relatively clear;if the original resonant frequency point of the resonant loop does not exist, the resonant frequency point disappears. The optimal configuration strategy of passive filter can effectively suppress harmonic resonance of distribution network in shale gas field.展开更多
A dynamic finite element method combined with finite element mixed formula for contact problem is used to analyze the dynamic characteristics of gear system. Considering the stiffness excitation, error excitation and ...A dynamic finite element method combined with finite element mixed formula for contact problem is used to analyze the dynamic characteristics of gear system. Considering the stiffness excitation, error excitation and meshing shock excitation, the dynamic finite element model is established for the entire gear system which includes gears, shafts, bearings and gearbox housing. By the software of I-DEAS, the natural frequency, normal mode, dynamic time-domain response, frequency-domain response and one-third octave velocity grade structure borne noise of gear system are studied by the method of theoretical modal analysis and dynamic response analysis. The maximum values of vibration and structure borne noise are occurred at the mesh frequency of output grade gearing.展开更多
The transmission of transverse vibrational energy of a vertically rigid beam plate coupled structure is analyzed to get the theoretical results of coupling loss factor(CLF), a very important parameter in statistical ...The transmission of transverse vibrational energy of a vertically rigid beam plate coupled structure is analyzed to get the theoretical results of coupling loss factor(CLF), a very important parameter in statistical energy analysis(SEA). The modal analysis method is used to discuss the vibration energy of the typical model, as well as the power flow between the two subsystems. Furthermore, the resolution to the coupling loss factor is also derived and compared with the measured values. The analytical results of the coupling loss factor agree with the measured ones fully, this new resolution is significant for the application of SEA.展开更多
The dynamic equations of flexible multibody systems with tree topological configuration are de- rived by using the Jourdain's principle.The independent joint coordinates are introduced to describe the large displa...The dynamic equations of flexible multibody systems with tree topological configuration are de- rived by using the Jourdain's principle.The independent joint coordinates are introduced to describe the large displacements of the bodies,and the modal coordinates are used to describe small deformations of flexible bodies based on the consistent mass finite element method and normal vibration mode analysis.The mini- mum differential equations are developed,which are compatible with the equations of multi-rigid body sys- tems or structural dynamics.The stiff problem in the numerical integration is thus alleviated effectively.The method used in this paper can be extended to deal with systems with other topological configurations. Finally,the validity and feasibility of the presented mathematical model are demonstrated by a numerical ex- ample of a manipulator with two elastic links.展开更多
基金supported in part by the State Key Program of National Natural Science Foundation of China under Grant No.U1866210the National Natural Science Foundation of China under Grant No.51807067。
文摘This paper proposes a residue based open-loop modal analysis method to detect low frequency modal resonance(LFMR),including asymmetric low frequency modal attraction(ALFMA)and asymmetric low frequency modal repulsion(ALFMR),of permanent magnetic synchronous generator based wind farms(PMSG-WFs)penetrated power systems.The formation of ALFMA and ALFMR caused by two open-loop low frequency oscillation(LFO)modes moving close and apart is analyzed in detail.Via predicting the trajectories of closed-loop LFO modes based on calculation of residue of open-loop LFO modes,both ALFMA and ALFMR can be detected.The proposed method can select LFO modes which move to the right half complex plane as control parameters vary.Simulation studies are carried out on a three-machine power system and a four-machine 11-bus power system to verify the properties of the proposed method.
文摘The chassis frame of a heavy lectra haul is analysed by both modal experiment method and finite element method (FEM ) . The first ten order modal parameters of the chassis frame have been obtained satisfactorily. These parameters have important reference value in designing the chassis frame properly and provide a necessary basis for the fault diagnostics of the truck.
文摘The kinetic model of the four-post-frame lifting mechanical system was established. The stiffness and damping matrices of differential equations of motion were obtained by using Lagrange’s equations. And the dynamic characteristics of system were analyzed by modal analysis method. Based upon this, the modifications of structural parameters which can improve dynamic performance were discussed. The low-level high-speed palletizer MDJ1200L was taken as a real case in the paper.
文摘Based on the background of achieving carbon peaking and carbon neutrality, the development and application of new high-power compressors, electric grid drilling RIGS and electric fracturing pump system provide new equipment support for the electric, green and intelligent development of shale gas fields in China. However, the harmonic pollution of shale gas grid becomes more serious due to the converter and frequency conversion device in the system, which easily causes harmonic resonance problem. Therefore, the harmonic resonance of shale gas grid is comprehensively analyzed and treated. Firstly, the working mechanism of compressor, electric drilling RIGS of the harmonic impedance model of electric fracturing pump system is established. Secondly, the main research methods of harmonic resonance analysis are introduced, and the basic principle of modal analysis is explained. Modal analysis method was used to analyze. Finally, harmonic resonance is suppressed. The results show that there may be multiple resonant frequency points in the distribution network changes, but these changes are relatively clear;if the original resonant frequency point of the resonant loop does not exist, the resonant frequency point disappears. The optimal configuration strategy of passive filter can effectively suppress harmonic resonance of distribution network in shale gas field.
基金Funded by the Natural Science Foundation of China (No. 50675232)the Natural Science Foundation of CQ CSTC (2006BB3008)
文摘A dynamic finite element method combined with finite element mixed formula for contact problem is used to analyze the dynamic characteristics of gear system. Considering the stiffness excitation, error excitation and meshing shock excitation, the dynamic finite element model is established for the entire gear system which includes gears, shafts, bearings and gearbox housing. By the software of I-DEAS, the natural frequency, normal mode, dynamic time-domain response, frequency-domain response and one-third octave velocity grade structure borne noise of gear system are studied by the method of theoretical modal analysis and dynamic response analysis. The maximum values of vibration and structure borne noise are occurred at the mesh frequency of output grade gearing.
文摘The transmission of transverse vibrational energy of a vertically rigid beam plate coupled structure is analyzed to get the theoretical results of coupling loss factor(CLF), a very important parameter in statistical energy analysis(SEA). The modal analysis method is used to discuss the vibration energy of the typical model, as well as the power flow between the two subsystems. Furthermore, the resolution to the coupling loss factor is also derived and compared with the measured values. The analytical results of the coupling loss factor agree with the measured ones fully, this new resolution is significant for the application of SEA.
基金The project supported by National Natural Science Foundation of China
文摘The dynamic equations of flexible multibody systems with tree topological configuration are de- rived by using the Jourdain's principle.The independent joint coordinates are introduced to describe the large displacements of the bodies,and the modal coordinates are used to describe small deformations of flexible bodies based on the consistent mass finite element method and normal vibration mode analysis.The mini- mum differential equations are developed,which are compatible with the equations of multi-rigid body sys- tems or structural dynamics.The stiff problem in the numerical integration is thus alleviated effectively.The method used in this paper can be extended to deal with systems with other topological configurations. Finally,the validity and feasibility of the presented mathematical model are demonstrated by a numerical ex- ample of a manipulator with two elastic links.
