本文介绍了二维PIC(Particle in cell)方法,这种方法常用于粒子动力学模拟中空间电荷作用的计算。并比较了以时间为自变量(t-code)和以纵向位置为自变量(z-code)的两种动力学模拟程序;针对“国家重点基础研究发展规划”洁净核能项目中...本文介绍了二维PIC(Particle in cell)方法,这种方法常用于粒子动力学模拟中空间电荷作用的计算。并比较了以时间为自变量(t-code)和以纵向位置为自变量(z-code)的两种动力学模拟程序;针对“国家重点基础研究发展规划”洁净核能项目中的射频四极(RFQ)加速器结构参数,给出了单束加速和正、负离子束同时加速两种情况下,t-code和z-code模拟得出的传输效率。结果表明,当束团的相位宽度大或能散大时,z-code 在计算空间电荷作用时会引入相对较大的误差,从而应该使用t-code来进行动力学模拟,以获得更准确的结果。展开更多
The code benchmarking for hadron linac using the 3D Particle-In-Cell (PIC) code is an important task in the European framework “High Intensity Pulsed Proton Injector” (HIPPI). PARMILA and HALODYN are two of the code...The code benchmarking for hadron linac using the 3D Particle-In-Cell (PIC) code is an important task in the European framework “High Intensity Pulsed Proton Injector” (HIPPI). PARMILA and HALODYN are two of the codes involved in this work. Both of these codes have been developed and used for linac design and beam dynamics studies. In this paper, the simulation results of the beam dynamics were compared and analyzed. As predicted by two codes, the simulation results show some agreements. The physical design strategy which was adopted in two codes was also discussed.展开更多
To calculate nonlinear transport of space charge dominated beam in 6D phase spaces, a computer code package LEADS-v5 (Linear and Electrostatic Accelerator Dynamics Simulations) has been developed. The codes calculate ...To calculate nonlinear transport of space charge dominated beam in 6D phase spaces, a computer code package LEADS-v5 (Linear and Electrostatic Accelerator Dynamics Simulations) has been developed. The codes calculate particle motions in the beam transport systems consisting of electrostatic and magnetic focusing lenses, ion analyzers, multipoles and RF accelerating structures. The nonlinear forces of external electric/magnetic fields are analyzed by the Lie algebraic method, and the space charge forces are obtained by the particle in cell (PIC) scheme. In the codes, Uniform and Gaussian particle distributions can be chosen to generate randomly the particle initial coordinates. The optimization procedures are provided to make the beam optics designs reasonable and fast. Graphically displays of calculated results are provided.展开更多
A novel low-complexity iterative receiver for multiuser space frequency block coding (SFBC) system was proposed in this paper. Unlike the conventional linear minimum mean square error (MMSE) detector, which requires m...A novel low-complexity iterative receiver for multiuser space frequency block coding (SFBC) system was proposed in this paper. Unlike the conventional linear minimum mean square error (MMSE) detector, which requires matrix inversion at each iteration, the soft-in soft-out (SISO) detector is simply a parallel interference cancellation (PIC)-matched filter (MF) operation. The probability density function (PDF) of PIC-MF detector output is approximated as Gaussian, whose variance is calculated with a priori information fed back from the channel decoder. With this approximation, the log likelihood ratios (LLRs) of transmitted bits are under-estimated. Then the LLRs are multiplied by a constant factor to achieve a performance gain. The constant factor is optimized according to extrinsic information transfer (EXIT) chart of the SISO detector. Simulation results show that the proposed iterative receiver can significantly improve the system performance and converge to the matched filter bound (MFB) with low computational complexity at high signal-to-noise ratios (SNRs).展开更多
文摘本文介绍了二维PIC(Particle in cell)方法,这种方法常用于粒子动力学模拟中空间电荷作用的计算。并比较了以时间为自变量(t-code)和以纵向位置为自变量(z-code)的两种动力学模拟程序;针对“国家重点基础研究发展规划”洁净核能项目中的射频四极(RFQ)加速器结构参数,给出了单束加速和正、负离子束同时加速两种情况下,t-code和z-code模拟得出的传输效率。结果表明,当束团的相位宽度大或能散大时,z-code 在计算空间电荷作用时会引入相对较大的误差,从而应该使用t-code来进行动力学模拟,以获得更准确的结果。
文摘The code benchmarking for hadron linac using the 3D Particle-In-Cell (PIC) code is an important task in the European framework “High Intensity Pulsed Proton Injector” (HIPPI). PARMILA and HALODYN are two of the codes involved in this work. Both of these codes have been developed and used for linac design and beam dynamics studies. In this paper, the simulation results of the beam dynamics were compared and analyzed. As predicted by two codes, the simulation results show some agreements. The physical design strategy which was adopted in two codes was also discussed.
文摘To calculate nonlinear transport of space charge dominated beam in 6D phase spaces, a computer code package LEADS-v5 (Linear and Electrostatic Accelerator Dynamics Simulations) has been developed. The codes calculate particle motions in the beam transport systems consisting of electrostatic and magnetic focusing lenses, ion analyzers, multipoles and RF accelerating structures. The nonlinear forces of external electric/magnetic fields are analyzed by the Lie algebraic method, and the space charge forces are obtained by the particle in cell (PIC) scheme. In the codes, Uniform and Gaussian particle distributions can be chosen to generate randomly the particle initial coordinates. The optimization procedures are provided to make the beam optics designs reasonable and fast. Graphically displays of calculated results are provided.
基金The Science and Technology Committee of Shanghai Municipality ( No 06DZ15013,No03DZ15010)
文摘A novel low-complexity iterative receiver for multiuser space frequency block coding (SFBC) system was proposed in this paper. Unlike the conventional linear minimum mean square error (MMSE) detector, which requires matrix inversion at each iteration, the soft-in soft-out (SISO) detector is simply a parallel interference cancellation (PIC)-matched filter (MF) operation. The probability density function (PDF) of PIC-MF detector output is approximated as Gaussian, whose variance is calculated with a priori information fed back from the channel decoder. With this approximation, the log likelihood ratios (LLRs) of transmitted bits are under-estimated. Then the LLRs are multiplied by a constant factor to achieve a performance gain. The constant factor is optimized according to extrinsic information transfer (EXIT) chart of the SISO detector. Simulation results show that the proposed iterative receiver can significantly improve the system performance and converge to the matched filter bound (MFB) with low computational complexity at high signal-to-noise ratios (SNRs).
