a new strategy combining an expert system and improved genetic algorithms is presented for tuning proportional-integral-derivative （PID） parameters for petrochemical processes. This retains the advantages of genetic...a new strategy combining an expert system and improved genetic algorithms is presented for tuning proportional-integral-derivative （PID） parameters for petrochemical processes. This retains the advantages of genetic algorithms, namely rapid convergence and attainment of the global optimum. Utilization of an orthogonal experiment method solves the determination of the genetic factors. Combination with an expert system can make best use of the actual experience of the plant operators. Simulation results of typical process systems examples show a good control performance and robustness.展开更多
An improved particle swarm algorithm based on the D-Tent chaotic model is put forward aiming at the standard particle swarm algorithm. The convergence rate of the late of proposed algorithm is improved by revising the...An improved particle swarm algorithm based on the D-Tent chaotic model is put forward aiming at the standard particle swarm algorithm. The convergence rate of the late of proposed algorithm is improved by revising the inertia weight of global optimal particles and the introduction of D-Tent chaotic sequence. Through the test of typical function and the autotuning test of proportionalintegral-derivative （PID） parameter, finally a simulation is made to the servo control system of a permanent magnet synchronous motor （PMSM） under double-loop control of rotating speed and current by utilizing the chaotic particle swarm algorithm. Studies show that the proposed algorithm can reduce the iterative times and improve the convergence rate under the condition that the global optimal solution can be got.展开更多
In the fiber winding process,strong disturbance,uncertainty,strong coupling,and fiber friction complicate the winding constant tension control.In order to effectively reduce the influence of these problems on the tens...In the fiber winding process,strong disturbance,uncertainty,strong coupling,and fiber friction complicate the winding constant tension control.In order to effectively reduce the influence of these problems on the tension output,this paper proposed a tension fluctuation rejection strategy based on feedforward compensation.In addition to the bias harmonic curve of the unknown state,the tension fluctuation also contains the influence of bounded noise.A tension fluctuation observer(TFO)is designed to cancel the uncertain periodic signal,in which the frequency generator is used to estimate the critical parameter information.Then,the fluctuation signal is reconstructed by a third-order auxiliary filter.The estimated signal feedforward compensates for the actual tension fluctuation.Furthermore,a time-varying parameters fractional-order PID controller(TPFOPID)is realized to attenuate the bounded noise in the fluctuation.Finally,TPFOPID is enhanced by TFO and applied to control a tension control system considering multi-source disturbances.The stability of the method is analyzed by using the Lyapunov theorem.Finally,numerical simulations verify that the proposed scheme improves the tracking ability and robustness of the system in response to tension fluctuations.展开更多
The design of a measurement and control system of injection molding machine based on C8051F020 SCM is presented in this paper. Some resources are provided by C8051F020 such as ADC, DAC, inner temperature sensors and P...The design of a measurement and control system of injection molding machine based on C8051F020 SCM is presented in this paper. Some resources are provided by C8051F020 such as ADC, DAC, inner temperature sensors and PWM functions. The application and achievement of the improved PID algorithm in constant temperature control of charging barrel for the injection molding machine are introduced in the paper. Given that the temperature of the charging barrel can be monitored in real-time and the corresponding temperature response curve can be acquired, the PID parameters can be adjusted conveniently and rapidly during the experiments of the temperature control.展开更多
An overview on nonlinear reconfigurable flight control approaches that have been demonstrated in flight-test or highfidelity simulation is presented. Various approaches for reconfigurable flight control systems are co...An overview on nonlinear reconfigurable flight control approaches that have been demonstrated in flight-test or highfidelity simulation is presented. Various approaches for reconfigurable flight control systems are considered, including nonlinear dynamic inversion, parameter identification and neural network technologies, backstepping and model predictive control approaches. The recent research work, flight tests, and potential strength and weakness of each approach are discussed objectively in order to give readers and researchers some reference. Finally, possible future directions and open problems in this area are addressed.展开更多
A nonlinear observer of friction torque is formulated for valve controlled servomotor system. The effect of the observer is studied with simulating method and its applied condition is analyzed. When the above observer...A nonlinear observer of friction torque is formulated for valve controlled servomotor system. The effect of the observer is studied with simulating method and its applied condition is analyzed. When the above observer is not suitable foe use, a simple PID controlling method with variable parameters is presented. The method has been proved to be effective by the experimental results.展开更多
文摘a new strategy combining an expert system and improved genetic algorithms is presented for tuning proportional-integral-derivative （PID） parameters for petrochemical processes. This retains the advantages of genetic algorithms, namely rapid convergence and attainment of the global optimum. Utilization of an orthogonal experiment method solves the determination of the genetic factors. Combination with an expert system can make best use of the actual experience of the plant operators. Simulation results of typical process systems examples show a good control performance and robustness.
基金supported by the National Natural Science Foundation of China(61301011)the Fundamental Research Funds for the Central Universities(HIT.NSRIF.2012010)+1 种基金the China Postdoctoral Science Foundation(2013M540279)the Heilongjiang Postdoctoral Financial Assistance(LBH-Z11157)
文摘An improved particle swarm algorithm based on the D-Tent chaotic model is put forward aiming at the standard particle swarm algorithm. The convergence rate of the late of proposed algorithm is improved by revising the inertia weight of global optimal particles and the introduction of D-Tent chaotic sequence. Through the test of typical function and the autotuning test of proportionalintegral-derivative （PID） parameter, finally a simulation is made to the servo control system of a permanent magnet synchronous motor （PMSM） under double-loop control of rotating speed and current by utilizing the chaotic particle swarm algorithm. Studies show that the proposed algorithm can reduce the iterative times and improve the convergence rate under the condition that the global optimal solution can be got.
基金funded by the National Natural Science Foundation of China(Grant Number 52075361)Shanxi Province Science and Technology Major Project(Grant Number 20201102003)+3 种基金Lvliang Science and Technology Guidance Special Key R&D Project(Grant Number 2022XDHZ08)National Natural Science Foundation of China(Grant Number 51905367)Shanxi Natural Science Foundation General Project(Grant Numbers 202103021224271,202203021211201)Shanxi Province Key Research and Development Plan(Grant Number 202102020101013).
文摘In the fiber winding process,strong disturbance,uncertainty,strong coupling,and fiber friction complicate the winding constant tension control.In order to effectively reduce the influence of these problems on the tension output,this paper proposed a tension fluctuation rejection strategy based on feedforward compensation.In addition to the bias harmonic curve of the unknown state,the tension fluctuation also contains the influence of bounded noise.A tension fluctuation observer(TFO)is designed to cancel the uncertain periodic signal,in which the frequency generator is used to estimate the critical parameter information.Then,the fluctuation signal is reconstructed by a third-order auxiliary filter.The estimated signal feedforward compensates for the actual tension fluctuation.Furthermore,a time-varying parameters fractional-order PID controller(TPFOPID)is realized to attenuate the bounded noise in the fluctuation.Finally,TPFOPID is enhanced by TFO and applied to control a tension control system considering multi-source disturbances.The stability of the method is analyzed by using the Lyapunov theorem.Finally,numerical simulations verify that the proposed scheme improves the tracking ability and robustness of the system in response to tension fluctuations.
文摘The design of a measurement and control system of injection molding machine based on C8051F020 SCM is presented in this paper. Some resources are provided by C8051F020 such as ADC, DAC, inner temperature sensors and PWM functions. The application and achievement of the improved PID algorithm in constant temperature control of charging barrel for the injection molding machine are introduced in the paper. Given that the temperature of the charging barrel can be monitored in real-time and the corresponding temperature response curve can be acquired, the PID parameters can be adjusted conveniently and rapidly during the experiments of the temperature control.
基金supported by the National Natural Science Foundation of China (61273171)the National Aerospace Science Foundation of China (2011ZA52009)
文摘An overview on nonlinear reconfigurable flight control approaches that have been demonstrated in flight-test or highfidelity simulation is presented. Various approaches for reconfigurable flight control systems are considered, including nonlinear dynamic inversion, parameter identification and neural network technologies, backstepping and model predictive control approaches. The recent research work, flight tests, and potential strength and weakness of each approach are discussed objectively in order to give readers and researchers some reference. Finally, possible future directions and open problems in this area are addressed.
文摘A nonlinear observer of friction torque is formulated for valve controlled servomotor system. The effect of the observer is studied with simulating method and its applied condition is analyzed. When the above observer is not suitable foe use, a simple PID controlling method with variable parameters is presented. The method has been proved to be effective by the experimental results.
